Haier HW-07LM13, HW-07LM03, HW-09LM13, HW-09LM03, HW-12LM13 User Manual

...
WINDOW TYPE ROOM AIR CONDITIONER
OPERATION
MANUAL
HW-07LM13 HW-07LM03 HW-09LM13 HW-09LM03 HW-12LM13 HW-12LM03
Please read this operation manual before using the air conditioner.
No.0010515220
Contents
Contents Part Name Operation Guide Maintenance Trouble shooting Installation Instructions Installation Guide
The machine is adaptive in following situation:
1. Applicable ambient temperature range:
Cooling
............................................................................... 2
.............................................................................. 3
................................................................ 4-5
...................................................................... 6-8
................................................................... 9
......................................................... 10
............................................................. 11-12
Indoor Outdoor
Maximum: Minimum:
Maximum: Minimum:
D.B/W.B D.B/W.B
D.B/W.B D.B
32oC/23oC 18oC/14oC
43oC/26oC
18oC
2. If the supply cord is damaged, it must be replaced by the manufacturer or its serviceagent or a similar qualified person.
3. After installation, the power plug should be easily reached.
4. The wiring method should be in line with the local wiring standard.
2
Parts Name
Machine body
Front panel Air inlet (indoor side) Machine body
Air outlet (indoor side) Air inlet (outdoor side)
Operation panel
Display
panel
Power plug Air filter (inside)
LOW FAN
HIGH FAN
MINI COOL
WAIT THREE MINUTES BEFORE RESTAR TING
3
MAX COOL
LOW COOL
HIGH COOL
Operation Guide
Auto swing switch
When the switch is set to " ", and vertical louvers will swing from side to side, delivering gentle air thus making you feel very comfortable. When it is set to " ", the indicator goes out, and the vertical louvers stop at any position.
Mode selection switch
Mode selection switch controls the fan motor speed and cooling speed.
Hint
<1>
When set to " HIGH FAN", fan motor runs at high speed to blow out strong air.
When set to "LOW FAN", fan motor runs at low
<2>
speed to blow out gentle air.
<3>
When set to "LOW COOL", air conditioner will start cooling at low speed, blowing out gentle air.
<4>
When set to "HIGH COOL", air conditioner will start speedy cooling, blowing out strong air.
<5>
When set to "OFF", air conditioner stops running.
When the mode selection switch is turned to "HIGH FAN" or "LOW FAN" , the air conditioner will only blow out air without cooling.
If the mode selection switch is turned from cooling mode to fan mode, do not turn it back until at least 3 minutes have elapsed.
4
Loading...
+ 8 hidden pages