Haier HSU-09L03/H, HSU-12L03/H, HSU-09R03, HSU-12R03 Operation Manual

No.0010552593

Please read this operation manual before using the air conditioner.

SPLIT TYPE ROOM AIR CONDITIONER

OPERATION MANUAL

HSU-09L03/H

HSU-12L03/H

HSU-09R03/H

HSU-12R03/H

1
2-3

4-111
12-14

15

Contents

Cautions
Parts and functions
Operation

Maintenance
Trouble shooting

Maximum: D.B

1

10.The appliance must be installed on strong enough supporter.

9.Young children should be supervised ensure that they do not play with the appliance.

8. The appliance is not intended to use by young children or infirm persons without supervision.

7. The waste battery should be disposed properly.

6. After installation, the power plug should be easily reached.

5. The wiring method should be in line with the local wiring standard.

4. The distance between the indoor unit and the floor should be more than 2m.

3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.

11.The wiring diagram is attached inside the machine.

or a similar qualified person. The type of connecting wire is H05RN-F or H07RN-F

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

Cautions

The machine is adaptive in following situation

I. Applicable ambient temperature range:

Cooling

Heating

Indoor

Outdoor

Outdoor

Indoor

Maximum: D.B / W.B 32oC/23oC

18oC/14oC
43oC/26oC

18oC
27oC

15oC
24oC/18oC

-7oC/-8oC

Minimum: D.B / W.B

Minimum: D.B
Maximum: D.B

Minimum: D.B
Maximum: D.B / W.B
Minimum: D.B / W.B

2

Parts and Functions

Outdoor Unit

OUTLET

INLET

CONNECTING PIPING AND ELECTRICAL WIRING
DRAIN HOSE

Display board

Display board

Inlet

Anion

Vertical flap

(Use remote controller to
adjust up and down air flow.
Don't adjust it manually)

Horizontal louver

Air filter

Inlet grille

Power plug

(inside)

(adjust left and right air flow)

(inside)

Indoor Unit

OPERATE

POWER

TIMER

SIGNAL RECEIVING WINDOW

FAN

DRY
HEAT

COOL

AUTO

3

Parts and Functions

Operation

1. Mode display

2. SWING display

3. FAN SPEED display

4. HEALTH display

5. LOCK display

6. SIGNAL SENDING

7. TIMER OFF display

8. TIMER ON display

9. CLOCK display

10. TEMP display

13. POWER ON/OFF

Used for unit start and stop.

14. MODE

Used to select AUTO run, COOL,
DRY, HEAT and FAN operation

15. FAN

Used to select fan speed LO, MED, HI, AUTO

16. HOUR

Used to set clock and timer setting.

17. SWING

Used to set auto fan direction.

18. SLEEP

Used to select sleep mode.

19. LOCK

Used to lock buttons and LCD
display.

20. TEMP.

Used to select your desired temp.

21. SET

Used to confirm timer and clock settings.

22. TIMER

Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF

23. CLOCK

Used to set correct time

25. RESET

normal condition.

Used to reset the controller back to

Clock set

When unit is started for the first time and after replacing batteries in remote controller,
clock should be adjusted as follows:
Press CLOCK button, "AM" or "PM" flashes.
Press or to set correct time. Each press will increase or decrease 1min. If the
button is kept depressed, time will change quickly.
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock
starts working.

Hints

After replacing with new batteries, remote controller will conduct self-check, displaying
all information on LCD. Then, it will become normal.

Buttons and display of the remote controller.

LO MED HIAUTO

12. HEAT display

ON/OFF

TEMP

MODE SET

FAN

TIMER

SWING

CLOCK

SLEEP

LOCK RESET

5
6

7

8

9

10

20

21

22

23

25

4

1

2
3

13

14

15
16

17

18

19

11

12

24

26

11. SLEEP display

24. HEAT

26. HEALTH

Used to set healthy operation

NOTE: (1)The following functions are not available and
(2) Cooling only unit do not have functions and displays related with heating.

4

26

24

12

Used to select heat mode.

«Î—°”√Õ¨“ª∆∑≈∆¡ΩΩ⁄
7#
µÁ≥ÿ,≥§ ±º‰≤ª”√ ±,Œ™
∑¿÷𬩓π«ÎΩ´µÁ≥ÿ»°
≥ˆ°£
‘⁄ π”√÷–»Á”ˆ“Ï≥£,«Î
Ω´µÁ≥ÿ»°≥ˆ,6∑÷÷”∫Û‘Ÿ
◊∞»Î–¬µÁ≥ÿ°£

∫£∂˚ºØÕ≈«‡µ∫∫£∂˚
ø’µ˜∆˜”–œfi◊‹π´Àæ

«Î—°”√Õ¨“ª∆∑≈∆¡ΩΩ⁄
7#
µÁ≥ÿ,≥§ ±º‰≤ª”√ ±,Œ™
∑¿÷𬩓π«ÎΩ´µÁ≥ÿ»°
≥ˆ°£
‘⁄ π”√÷–»Á”ˆ“Ï≥£,«Î
Ω´µÁ≥ÿ»°≥ˆ,6∑÷÷”∫Û‘Ÿ
◊∞»Î–¬µÁ≥ÿ°£

∫£∂˚ºØÕ≈«‡µ∫∫£∂˚
ø’µ˜∆˜”–œfi◊‹π´Àæ

«Î—°”√Õ¨“ª∆∑≈∆¡ΩΩ⁄
7#

µÁ≥ÿ,≥§ ±º‰≤ª”√ ±,Œ™
∑¿÷𬩓π«ÎΩ´µÁ≥ÿ»°

≥ˆ°£
‘⁄ π”√÷–»Á”ˆ“Ï≥£,«Î
Ω´µÁ≥ÿ»°≥ˆ,6∑÷÷”∫Û‘Ÿ

◊∞»Î–¬µÁ≥ÿ°£

∫£∂˚ºØÕ≈«‡µ∫∫£∂˚
ø’µ˜∆˜”–œfi◊‹π´Àæ

4

Operation

Remote controller's operation

When in use, put the signal transmission head directly to the
receiver hole on the indoor unit.

The distance between the signal transmission head and the
receiver hole should be within 7m without any obstacle as well.

Don't throw the controller, prevent it from being damaged.
When electronic-started type fluorescent lamp or change-over

type fluorescent lamp or wireless telephone is installed in the
room, the receiver is apt to be disturbed in receivering the signals
so the distance to the indoor unit should be shorter.

Loading of the battery

Load the batteries as illustrated. 2 R-03 batteries, resetting key (cylinder)

Remove the battery cover:

Slightly press " " and push down the cover.

Load the battery:

Be sure that the loading is in line with the" + "/"-"
pole request as illustrated.

Put on the cover again
Confirmation indicator:

In disorderation, reload the batteries or load the new batteries after 6mins.

Note:

Use two new same-typed batteries when loading.
If the remote controller can't run normally or doesn't work at all,
use a sharp pointed item to press the reset key.

Hint:

Remove the batteries in case unit won't be in usage for a long period.
If there are any display after taking-out just need to press reset key.

Power failure resume(please set and apply as necessary)

If sudden power failure occurs, the unit will resume original operation when power is
supplied again.

Note:

When sudden power failure happens during unit operation in power failure resume mode, if
the air conditioner is not desired for use in a long period, please shut off the power supply
in case that the unit automatically resume operation when power is re-supplied, or press
ON/OFF to turn off the unit when power resumes.