Haier HSU-12HM03, HSU-12HM03(B) Operation Manual

OPERATION MANUAL

No.0010544529

Please read this operation manual
before using the air conditioner.

For the purpose of the safety,the air conditioner
must be properly grounded in accordance
with specifications.

Always remember to unplug the air
conditioner before openning inlet grill. Never
unplug your air conditioner by pulling on
the power cord. Always grip plug firmly and
pull straight out from the outlet.

All electrical repairs must be carried out
by qualified electricians. Inadequate repairs
may result in a major source of danger for
the user of the air conditioner.

Do not damage any parts of the air
conditioner that carry refrigerant by piercing
or performating the air conditioner's tubes
with sharp or pointed items , crushing or
twisting any tubes , or scraping the coatings
off the surfaces. If the refrigerant spurts
out and gets into eyes , it may result in
serious eye injuries.

Disposal of the old air conditioner

Before disposing an old air conditioner that
goes out of use, please make sure it's
inoperative and safe. Unplug the air
conditioner in order to avoid the risk of

child

entrapment.
It must be noticed that air conditioner

system contains refrigerants, which require
specialized waste disposal. The valuable
materials contained in an air conditioner

can
be recycled. Contact your local waste
disposal center for proper disposal of an
old air conditioner and contact your local
authority or your dealer if you have any
question. Please ensure that the pipework
of your air conditioner does not get

damaged
prior to being picked up by the relevant
waste disposal center, and contribute to
environmental awareness by insisting on
an appropriate, anti-pollution method of
disposal.

Disposal of the packaging of your
new air conditioner

All the packaging materials employed in

the

package of your new air conditioner may

be
disposed without any danger to the
environment.

The cardboard box may be broken or cut

into
smaller pieces and given to a waste paper
disposal service. The wrapping bag made of
polyethylene and the polyethylene foam pads

All these valuable materials may be taken
to a waste collecting center and used again
after adequate recycling.

Consult your local authorities for the name
and address of the waste materials
collecting centers and waste paper disposal
services nearest to your house.

Safety Instructions and Warnings

Before starting the air conditioner, read the
information given in the User's Guide
carefully. The User's Guide contains very
important observations relating to the
assembly , operation and maintenance of
the air conditioner.

The manufacturer does not accept
responsibility for any damages that may
arise due to non-observation of the following
instruction.

Damaged air conditioners are not to be
put into operation. In case of doubt, consult
your supplier.

Use of the air conditioner is to be carried
out in strict compliance with the relative
instructions set forth in the User's Guide.

Installation shall be done by professional
people, don't install unit by yourself.

Cautions

The machine is adaptive in following
situation

Cooling

Heating

Indoor

Indoor

Outdoor

Outdoor

Maximum: D.B/W.B 32°C / 23°C
Minimum: D.B/W.B 18°C / 14°C

Maximum: D.B/W.B 43°C / 26°C

Minimum: D.B 18°C
Maximum: D.B 27°C

Minimum: D.B 15°C
Maximum: D.B/W.B 24°C / 18°C

Minimum: D.B/W.B -7°C / -8°C

Do not obstruct or cover the ventilation
grille of the air conditioner. Do not put
fingers or any other things into the
inlet/outlet and swing louver.

Do not allow children to play with the air
conditioner. In no case should children be
allowed to sit on the outdoor unit.

Specifications

The refrigerating circuit is leak-proof.

1. Applicable ambient temperature range:

2. If the power supply cord is damaged, it
must be replaced by the manufacturer
or its service agent or a similar qualified
person.

3. If the fuse of indoor unit on PC board is
broken,please change it with the type of
T. 3.15A/ 250V. If the fuse of outdoor unit
is broken, change it with the type of
F.20A/250V.

4. The wiring method should be in line with
the local wiring standard.

5. After installation, the power plug should
be easily reached.

6. The waste battery should be disposed
properly.

7. The appliance is not intended for use by
young children or infirm persons without
supervision.

8. Young children should be supervised to
ensure that they do not play with the
applience.

10.Please employ the proper power plug,
which fit into the power supply cord.

11.The power plug and connecting cable
must have acquired the local attestation.

Cautions

Installation

WARNING

Please call Sales/Service Shop for the Installation.

Do not attempt to install the air conditioner by yourself because improper works may
cause electric shock, fire, water leakage.

CAUTION

Installation in a inadequate place may cause accidents. Do not install in the following place.

Connect the earth
cable.

PROHIBITION PROHIBITION

STRICT

ENFORCEMENT

earthing

Do not install in the
place where there
is any possibility
of inflammable
gas leakage around
the unit.

Do not get the unit
exposed to vapor
or oil steam.

Check proper
installation of the
drainage securely

Please read the following Safety Instructions carefully prior to use.
The instructions are classified into two levels, WARNING and CAUTION according to the
seriousness of possible risks and damages as follows. Compliance to the instructions are
strictly required for safety use.

Safety Instruction

Cautions

When abnormality such as burnt-small found, immediately
stop the operation button and contact sales shop.

Connect power supply cord to the
outlet completely.

Use the voltage AC220~230V.

Take care not to damage the
power supply cord.

Do not use power supply cord in
a bundle.

Do not use power supply cord
extended or connected in halfway.

Do not insert objects into the air
inlet or outlet.

Do not try to repair or reconstruct
by yourself.

Do not channel the air flow directly
at people, especially at infants or
the aged.

Do not start or stop the operation
by disconnecting the power supply
cord and so on.

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

OFF

STRICT
ENFORCEMENT

STRICT
ENFORCEMENT

Use an exclusive power source with a circuit breaker.

CAUTION

Do not use for the purpose of
storage of food, art work, precise
equipment, breeding , or cultivation.

Take fresh air occasionally
especially when gas appliance is
running at the same time.

Do not operate the switch with wet
hand.

Do not pour water onto the unit
for cleaning.

Check good condition of the
installation stand.

Do not install the unit near a fireplace
or other heating apparatus.

Do not place animals or plants in
the direct path of the air flow.

Do not place any objects on or
climb on the unit.

Do not place flower vase or water
containers on the top of the unit.

PROHIBITIONPROHIBITION

PROHIBITIONPROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

STRICT
ENFORCEMENT

WARNING

STRICT
ENFORCEMENT

RES

TI

MO SW

FA

PO

ON

TE

Cautions

Parts and Functions

Indoor unit

Inlet grille

Outlet

Signal receiving window

Horizontal louver

(Use remote controller to
adjust up and down air flow.
Don’t adjust it manually)

(adjust left and right air flow)

Vertical louver

Air filter

Power plug

Anion generator
(inside)

Outdoor unit

Human sensor

Timed operation indicator

Operation indicator

Light sensing receiver

Human sensing indicator

Healthy operation indicator

Remote signal receiver

Power indicator

Sleep indicator

TIMER
RUN

HUMAN SENSE

SLEEP

POWER

HEALTH

Control panel

Multi photic
catalyst air filter
(inside)

Parts and Functions

Remote Controller

8.HOUR button
Used to set clock and timer setting

9.HEALTHY button

Used to set healthy operation.

10. ON/OFF button
Used for unit start and stop.

24. TIMER OFF display

13. LOCK diaplay

14. SWING UP/DOWN diaplay

15. SLEEP diaplay

16. HEALTHY diaplay

18. diaplay

20.SIGNAL SENDING diaplay

21.POWER/SOFT diaplay

22.Left/right air flow display

19. diaplay

23.TEMP display
Remote controller: to display the TEMP. setting

25. CLOCK display

26.TEMP button
Used to select your desired temperature

27.FAN button
Used to select fan speed: LO,MED, HI, AUTO

28.SWING UP/DOWN button
Used to select up or down air sending direction.

29.SWING LEFT/RIGHT button
Used to select left/right air flow.

30.SET button
Used to confirm timer and clock settings.

31.POWER/SOFT button

33.LOCK
Used to lock buttons and LCD display. If
pressed, the other buttons will be disabled and
the lock condition display appears.
Press it once again, lock will be canceled and
lock condition display disappears.

6.SLEEP button

Used to select sleep mode.

7.MODE button

AUTO COOL DRY FAN HEAT

34. LIGHT display
It is to set light sensing function, which enables
normal operation for strong indoor light (day) or
sleep running mode for weak indoor light (night).

12. FAN SPEED diaplay

AUTO

HI

MED

LOW

32. button

Used to select nature air

17. diaplay

MODE

CLOCK

POWER/SOFT

TIMER

SET

LOCK

TEMP

HEALTH FAN

OFF

ON

1

23

27

4
3

2

25

22

7

5

6

12

15

8

13

14

26

10

11

9

20

24

28

29

30

31
32

34

21

17

18

19

RESET

LIGHT

SLEEP

SWING

16

33

2.RESET
When the remote controller appears

abnormal, use a sharp pointed article
to press this button to reset the
remote controller normal.

4.TIMER button
Used to select TIMER ON,
TIMER OFF,TIMER ON-OFF

5.CLOCK button

Used to set correct time.

1. button (light sensing)

It is to set light sensing function,

which enables normal operation for
strong indoor light (day) or sleep
running mode for weak indoor light
(night).

3. button
It is to set human sensing function,

which automatically gets standby if
detecting no human activity for
continuously 20 min, and automatically
starts running upon re-detecting
human activity.

Parts and Functions

Clock Set
When unit is started for the first time and after replacing batteries in remote
controller, clock should be adjusted as follows:

1. Press CLOCK button,"AM" or "PM" flashes.

2. Press or to set correct time. Each press will increase or decrease 1
min. If the button is kept depressed, time will change quickly.

3. After time setting is confirmed, press SET, "AM" or "PM" stop flashing,
while clock starts working.

Remote controller's operation
When in use, put the signal transmission head directly to the receiver hole on the indoor unit.

The distance between the signal transmission head and the receiver hole should be within 7 m without
any obstacle as well.
Don't throw or knock the remoter controller.

When electronic-started type fluorescent lamp or change-over type fluorescent lamp or wireless

telephone is installed in the room, the receiver is apt to be disturbed in receiving the signals, so the
distance to the indoor unit should be shorter.

Loading of the battery
Load the batteries as illustrated right.

2 R-03 (7#) batteries

Remove the battery cover:

Slightly press" " area and push down the cover
as illustrated.

Load the battery:

Be sure that the loading is in line with the "+" / "-" pole
request as illustrated on the bottom of the case.

Put on the cover again.

Confirmation indicator:

After pressing power ON/OFF, if no display, reload the batteries.

Note:

Full display or unclear display during operation indicates the batteries have been used up.
Please

change batteries.
Used two new same-typed batteries when loading.
If the remote controller can't run normally during operation, please remove the batteries and
reload

several minutes later.

Hint:

Remove the batteries in case unit won't be in usage for a long period. If there are any display afte

r

taking-out, just need to press reset key.

1.DO NOT MIX OLD WITH
NEW BATTERIES AND
DO NOT USE BATTERIES
OF DIFFERENT TYPES
TOGETHER

2.INSERT CORRECTLY 2
(TWO) R-03 BATTERIES
IN THE + - POLARITY

3.PLEASE REMOVE THE
BATTERIES WHEN THE
REMOTE CONTRLLER
DISORDER,AND RELOAD
NEW'S AFTER SIX
MINUTES

REMOTE CONTROL UNIT

MODEL:YR-H05

1.DO NOT MIX OLD WITH
NEW BATTERIES AND
DO NOT USE BATTERIES
OF DIFFERENT TYPES

TOGETHER

2.INSERT CORRECTLY 2
(TWO) R-03 BATTERIES
IN THE + - POLARITY

3.PLEASE REMOVE THE
BATTERIES WHEN THE

REMOTE CONTRLLER
DISORDER,AND RELOAD

NEW'S AFTER SIX
MINUTES

REMOTE CONTROL UNIT

MODEL:YR-H05

-

+

-

+

1.DO NOT MIX OLD WITH
NEW BATTERIES AND
DO NOT USE BATTERIES
OF DIFFERENT TYPES
TOGETHER

2.INSERT CORRECTLY 2
(TWO) R-03 BATTERIES
IN THE + - POLARITY

3.PLEASE REMOVE THE
BATTERIES WHEN THE
REMOTE CONTRLLER
DISORDER,AND RELOAD
NEW'S AFTER SIX
MINUTES

REMOTE CONTROL UNIT

MODEL:YR-H05

-

+

-

+

CLOCK

POWER/SOFT

TIMER

SET

LOCK

RESET

LIGHT

MODE

SLEEP

SWING

Operation

HEALTH Operation

1. Unit start

Press ON/OFF on the indoor unit,or press ON/OFF on
the remote controller, unit starts.
Previous operation status appears on LCD display ,
and set the operation mode.

2. Select operation mode

Press HEALTH button. For each press, is displayed
now the air copnditioner is operating the healthy function.

3. Unit stop

Press HEALTH button, the healthy function stops.

When the fan in the indoor unit does not work, the health lamp lights up, but
the anion generator does not release anion.

Note

BRIEF INTRODUCTION TO HEALTH OPERATION

The anion generator in the air conditioner can generate a lot of anion to
effectively balance the quantity of position and anion in the air and also to kill
bacteria and speed up the dust sediment in the room and finally clean the air
in the room.

Remote Controller

MODE

CLOCK

POWER/SOFT

TIMER

SET

LOCK

TEMP

HEALTH FAN

OFF

ON

RESET

LIGHT

SLEEP

SWING

2

1

3

Operation

AUTO Operation

1. Unit start

Press ON/OFF on the indoor unit,or press ON/OFF on
the remote controller, unit starts.
Previous operation status appears on LCD display ,
and set the operation mode.

2. Select operation mode

Press MODE button. For each press, operation mode
changes as follows:

Remote controller:

Then Select AUTO operation

3. Unit stop

Press ON/OFF button, the unit stops.

About AUTO mode
In AUTO run mode, the air conditioner will
automatically select cooling or heating
operation mode according to room temperature.

AUTO

COOL DRY FAN

HEAT

Remote Controller

MODE

CLOCK

POWER/SOFT

TIMER

SET

LOCK

TEMP

HEALTH FAN

OFF

ON

RESET

LIGHT

SLEEP

SWING

2

1

3

Operation

COOL Operation

1. Unit start

Press ON/OFF on the indoor unit,or press ON/OFF on the
remote controller, unit starts.
Previous operation status appears on LCD display.

2. Select operation mode

Press MODE button. For each press, operation mode
changes as follows:
Remote controller:

Then Select COOL operation.

3. Select temp. setting
Press TEMP. button.
Every time the button is pressed, temp. setting
increases 1°C , if kept depressed, it will increase
rapidly.
Every time the button is pressed, temp. setting
decreases 1°C , if kept depressed, it will decrease
rapidly.

Select a desired temperature.

4. Fan speed selection

Press FAN button. For each press, fan speed changes as
follows:
Remote controller:

When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.

5. Unit stop

Press ON/OFF button, the unit stops.

AUTO COOL DRY FAN HEAT

Remote Controller

AUTO

HI

MED

LOW

MODE

CLOCK

POWER/SOFT

TIMER

SET

LOCK

TEMP

HEALTH FAN

OFF

ON

RESET

LIGHT

SLEEP

SWING

3

3

2

1

5

4

Operation

DRY Operation

COOL operation starts when room
temp. is higher than temp. setting.

Ultra-low air flow

Temp. setting+2 C

Temp. setting

On reaching temp. setting +2°C,
unit will run in mild DRY mode.

Remote Controller

MODE

CLOCK

POWER/SOFT

TIMER

SET

LOCK

TEMP

FAN

OFF

ON

RESET

LIGHT

SLEEP

SWING

HEALTH

1

2

3

3

4

5

1. Unit start

Press ON/OFF button on the indoor unit or press
ON/OFF on the remote controller, unit starts.
Previous operation status appears on LCD display .

2. Select operation mode

Press MODE button. For each press, operation mode
changes as follows:
Remote controller:

Conrol panel:
Then Select DRY operation.

3. Select temp. setting
Press TEMP. button.
Every time the button is pressed, temp. setting
increases 1°C , if kept depressed, it will increase
rapidly.
Every time the button is pressed, temp. setting
decreases 1°C , if kept depressed, it will decrease
rapidly.
Select a desired temperature.

4. Fan speed selection

Press FAN button. For each press, fan speed changes as
follows:
Remote controller:

In DRY mode, when room temperature becomes 2°C
higher than temp. setting, unit will intermittently at LO
speed regardless of FAN setting.

5. Unit stop

Press ON/OFF button, the unit stops.

AUTO

HI

MED

LOW

AUTO COOL DRY FAN HEAT