Haier HLT41E Owner’s Manual

Twin-tub Washing Machine With Pump

Please read this manual carefully before using.

Retain it for reference
please check if the power receptacle is earthed

reliably before usage to guarantee your safety

The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulations.

User's manual

Names of the parts.............the 2nd cover

Safety precautions ...............................1

Installation and adjustment ..................3

Introduction of the major functions .......5

Preparation before washing ................6

The musts in washing .........................7

Usage of the detergent .......................8

Washing sequence ..............................9

Disposal after washing .......................13

Contents

Before using

Using process

Trouble-shooting*

Answers to question.....................15

Specification*

Circuit diagram...........the back cover

Packing list ......................................16

XPB90-99VGS

Before Using

Before Using

Names of the parts

Outer cover of the spin tub

Inner cover of the spin tub

Spin timer

Spin tub frame

Spin tub

Cabinet

Power cord

Meaning and description of the symbols

Warning sign

Forbidding sign

Contents marked with that symbol
are related to the safety of the
product and the personal safety
of the users. Please operate in
strict conformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal safety of the user.

Contents marked with that symbol
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.

Water-filling entrance

Water inlet selector handle

Buzzer

Wash selector

Wash timer

Control panel

Cascade outlet

filter frame

Inner tub

Pulsator

Drain hose

Base frame

Honourable users,
Thank you for choosing our products.
Our products integrate high-tech, precision, frontier science .To facilitate using it, please read this manual
carefully and operate this machine according to it.

Accessories

Water inlet hose
(one piece)

Gland
(one piece)

Lint filter
(one piece)

Lint filter(installed by user)

Before Using

Before Using

Safety precautions

If the power cord is bad, to avoid risk it is required to replace it by the technicians
of our special shop or the after-sale service department. Keep the pin of the power
plug clean.

Be sure to use three-phase receptacle.
Earth the earthing terminal of the
receptacle reliably.

Do not put the machine at damp place
like the bathroom . Never wash it with
water.

In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.

Ventilation hole at
the bottom of the
washing machine

Be sure to pull the plug off when there's
power failure, or the machine is being
moved, cleaned or when it is idle.

Do not use water hotter than 50 C .

Do not share one receptacle with other
electric appliances. Do not use it in
case that the power plug is damaged
or the inserting into the receptacle is
loose.

Earth

Do not wash water-proof laundries such
as the raincoat, bicycle shelter etc. To
avoid abnormal vibration during spinning.

Before Using

Before Using

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.

Handicapped or children without care
shall not use the machine.

Do not put any hot or heavy items
( such as the kettle with hot water )
on the washing machine.

Do not decompose, repair or alter the
machine by yourself.

Keep the machine away from direct
sunlight and heat source like the
heater.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

Petro

l

Thinner

Safety precautions

To prevent your laundries and washing
machine from damage , be sure to take
out of the foreign materials from your
pocket , such as coins, buttons, sand
or hair pins etc.

Before washing, please check if the
water tap is open, and if the water inlet
pipe is connected properly.

It is suggested to use low-foaming
washing powder

Before Using

Before Using

Installation and adjustment

Install the water inlet hose; Select the water level

(about 68L)

Maximum

Max

(about 83L)

Minimum

Min

(about 49L)

Medium

Med

Insert the water inlet hose into the water-filling
entrance on the control panel directly. (pull it
out to dismantle it)

Select water level according to the
quantity of the laundries.

Attention:
In water filling, do not exceed
the"Max" water level. Otherwise
the water may overflow out of the
washing machine.

Water inlet hose

Water-filling
entrance

Water level
adjusting lever

Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.

Usage of the drain hose

<1.2m

The drainage shall be smooth with the drain hose

1.Put the drain hose up to suitable position

2.Do not step on or press the drain hose

Install the lint filter

After opening the package, please take out the
lint filter from the document bag and install it
into the Filter frame of the inner tub. See to the right Figure.

Lint filter

Filter frame

Extend the drain hose from the rear side

How to change the direction of the drain hose

Figure 1 indicates the ex factory installation
position of the drain hose.

Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Dismantle the drain hose fixing clamp and take
the hose out of the fixing groove.
(See to Figure 2).

Embed the drain hose into the groove along the side
of the spin tub in the order of (1)~(3), heading for the
side of the spin tub. (See to Figure 3).

Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.

Figure 1

Figure 2

Figure 3

Figure 4

Embed into the
groove in turn

Back

Before Using

Before Using

Extend the drain hose from the side of spin tub

Soft item

Soft item

Extend to the
spin tub side

Dismantle the drain hose fixing clamp.

Take out the drain hose from the fixing groove.

Extend it from the rear side as per the direction

of the arrow. (When the drain hose is extended

from the rear side, it can be hung on the point

for drain hose at the two sides of the cabinet.)

(See to Figure 4).

Front

Drain hose fixing clamp