Haier HLM-116B Instruction Manual

INSTRUCTION

INSTRUCTION MANUAL

MANUAL

W ATER

W ATER DISPENSER

DISPENSER

H LM

LM -116B

-116B

PRODUCT

PRODUCT AND

AND

AND DESCRIPTION

DESCRIPTION

SPECIAL

SPECIAL CAUTIONS

CAUTIONS

* This product belong to the type Ⅰ home appliance, this dispenser have to connect with a three core socket which with a grounding wire. Or use the e lectrical leakage protector. * Please remember do not insert the plug of this dispenser into the socket which used by some other home appliances or facilities together. * If do not use the dispenser for long time, please disconnect the dispenser with the electrical power. * Do not make any changes on the plug yourself or prolong the power cord yourself. * The connecting way of the power cord: X type connecting, if the power cord get damaged, must be changed by the professional maintenance person, do not change the power cord by yourself. * When the water dispenser is working, please do not allow the children play with the dispenser, to avoid the hurt of the hot water.

OPERATION

OPERATION INSTRUCTIONS

INSTRUCTIONS

� Operation environmental temperature: 10 ℃ -42 ℃ . � If the device is not applied for a long time, after the hot water cools down,

please remove the power plug and revolve the backside drainage cap to

drain the rest water in the hot tank then tighten the cap. Open the cold water faucet to drain the rest water in the cold tank.

� If you do not plan to use the water heating function for more than three

days, we strongly recommend that you turn off the hot water function.

TAKING

TAKING DISPENSER

DISPENSER

DISPENSER OUT

OUT

OUT OR

OR SERVICE

SERVICE

� If the water dispenser will not be used for a long period of time, unplug the

power supply cord.

� Turn off the hot water. � Drain the water through the faucets. � Drain the water from tanks by drainage hole from the back of the

dispenser.

ATTENTIONS

� Do not use the bottle with any crack, leakage or holes. � Do not set “ heating ” function until water comes out of hot water faucet to

prevent any damage on the heating tube.

� Never set “ heating ” function when there is no water. � In the process of using, check the water tray frequently. If the water tray is

full, please pour the water out in time.

� Do not change the set of “ cooling ” between “ ON ” and “ OFF ” in three

minutes and protect the compressor and extend the compressor usage life.

� This water dispenser is not recommended for outdoor use. Locate the

dispenser vertically and on the flat floor. Please keep the back side of the dispenser more than 20 cm to the wall or other appliance, to make a better heating emanating for the condenser of the dispenser .

� Locate the dispenser away from direct sunlight and sources of heat (stove,

heater, radiator, etc.).

� Keep the body of the dispenser clean , avoid the body of dispenser to be

scratched by the hard and sharp things.

� Please do not incline the dispenser more th a n 45 degrees when move it.

And also when mov e the dispenser, to avoid dropping and crash.

� Please do not locate the dispenser near the costly appliance or facility, like

the

TV,

DVD.

PREPA

PREPA RATION

RATION

RATION BEFORE

BEFORE

BEFORE FIRST

FIRST

FIRST OPERATION

OPERATION

� Before connecting the appliance to the power source. Let it stand upright

for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

The water dispenser is pre-cleaned at the factory but the reservoir and water

lines must be flushed with fresh water before use as follows:

1. Keep the unit unplugged.

2. Check and make sure the backside hot water drainage hole cap is not leaked or broken.

3. Fill water tank with tap water full to capacity, wait for 5 minutes until water settles.

4. Press the hot water faucet button until water comes out, then stop.

+ 5 hidden pages

Haier HLM-116B Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual