Haier D34FV6 User Manual

Position of Buttons and Plug-ins

Front and Side panel

D29FV6 , D34FV6 Model

Channel position up/down

Volume up/ down

MENU

Back panel

D29FV6 Model

VGA input terminal

AV output terminals

Antenna input

TV/Video

Infrared receiver

(input selector

Power indicator

DVI input terminal

DVI IN

Power switch

D34FV6 Model

VGA input terminal

AV output terminals

Side AV terminal

DVI input terminal

Antenna input

DVI IN

S-video input terminal

HDTV input terminals

AV2 input terminals

AV1 input terminals

S-video input terminal

DVD component terminals

HDTV input terminals

AV2 input terminals

AV1 input terminals

DVD component terminals

S-video input terminal: Special video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track R

AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track R

AV2 input terminals MONITOR : VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
Av1 input terminals MONITOR :VIDEO AUDIO :L/MONO Track L/MONO ,R Track R

DVD component terminals:
Interleaved signal Y C

b Cr AUDIO L/MONO Track L/MONO ,R Track R

Progressive signal YPb Pr AUDIO L/MONO Track L/MONO ,R Track R

HDTV input terminals: YPb Pr terminal AUDIO L/MONO Track L/MONO ,R Track R

1.When the S-video terminal and the Video 1 terminals are connected
at the same time, the S-video terminal is preferential.

2.When the side AV is connected, please select the Video 2 terminal.

Watching TV Programs (continued)

Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of the programs in memory
with (There are 12 pictures display on the screen at the same time)."OFF" skip status

Program swap and auto scan functions

Program swap

SWAP

1. Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).

2. If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.

3. If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.

8
B/G
144MHz
NORMAL

18
B/G
144MHz
NORMAL

18
B/G
144MHz
NORMAL

SCAN

CH+

MENU

VOL- VOL+

CH-

Auto program scan

1. Press the SCAN button to
scan through all the memorized
TV channels. The TV set screen
displays 12 pictures at the same
time. Press the S.STD button to
scan next page, and press the
P.STD to scan last page.

2.Press the CH+/- buttons and
VOL-/+ buttons to select the
program that you desired, and
press the MENU button to
confirm.

Tuning (Continued)

Search

After searching (Continued)

Press the CH+/- buttons to check channels.

CH+

MENU

VOL- VOL+

CH-

TUNE

CH+

MENU

VOL- VOL+

CH-

CH+

If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).

Search

1. Press the CH+/- buttons or Direct
select button to select the desired
channel number.

2. Press the TUNE button, the tuning
menu will appear on the screen.

( For example, the auto search mode I.)

. Press the CH+/- buttons to

move the indicator to "Search".

Prog NO. 008
Skip OFF
Sound Sys. B/G

TUN.

Fine Tune
Search
Auto Search

1
B/G
144MHz
NORMAL

VOL- VOL+

MENU

CH-

CALL

4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue

Prog NO. 008
Skip OFF
Sound Sys. B/G

TUN.

Fine Tune
Search
Auto Search

Search 001

125.00MHz

to search until it has searched the TV
signal you need.

Note:
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL button once.

Convenient Picture and Sound Controls (Continued)

Surround effect chip has been employed to form a vivid and real space surround sound
effect.

Sound Effect, Surround and Mute functions

Sound Effect function

SOUND

CH+

MENU

VOL- VOL+

CH-

There are Stereo, V.SRS and MONO sound effect for the
TV set. You may select the desired option.

1. Press the SOUND button, the
Sound menu will appear on the
screen.

. Press the CH+/- buttons to move

the indicator to "Sound Effect".

. Press the VOL+ button to

sub-menu.

. Press the CH+/- buttons to select

the desired option, then the sound effect of the TV set turn to the

sound effect selected. Press MENU button to exit the sub-menu.

Treble 50

SOU.

Bass 50
Balance 50
Sound Effect
Surround ON

Stereo
V.SRS
Mono

SOUND

CH+

MENU

VOL- VOL+

CH-

Surround Function

1. Press the SOUND button, the
Sound menu will appear on the
screen.

. Press the CH+/- buttons to move

the indicator to " Surround ".

Treble 50

SOU.

Bass 50
Balance 50
Sound Effect
Surround ON

. Press the VOL-/+ buttons to turn

the " Surround " function ON.

How to use the Mute function

When you want to listen to the sound nearby, or when you are
answering the telephone, or talking with your friends, you may use
the mute function.

1. Press the MUTE button once, a
sign of mute will appear on the
screen, and then the sound will be
eliminated to half; press the MUTE
button again the sound will be
eliminated completely .

2. Press the volume button or

press the MUTE button again,

and the sound will be recovered.