Haier YR-H71, AF092FCBHA, AF122FCBHA Operation Manual

OPERATION MANUAL

YR-H71

Please read this operation manual before using the air conditioner.
Please keep this manual carefully and safely.

Health Function and Installating the Reciever

No. 0010573685

C

Table of Contents

Operation

4-5

Parts and Functions

1-3

6

Please press the botton "CODE" to choose the program of code "B".

Parts and Functions

1

Some functions of this controller maybe not available according to the corresponding PCB's functions,such
as: which are optional for different unit.

NOTE:For the indoor Wall Mounted and Cabinet units

Some functions of this controller maybe not available according to the corresponding PCB's functions,such
as: which are optional for different unit.

NOTE:For the Convertible and Cassette and console indoor units

Some functions of this controller maybe not available according to the corresponding PCB's functions,such
as: which are optional for different unit.

NOTE:For the Duct and Ceiling concealed indoor units

After set the right function mode,press health button,remote controller displays " ",now the indoor unit
power lamp turns form orange color to green color,oxygen pump or negative ion generator starts up to
apply oxygen or negative ion to indoor.
Press the button again,the sign"

"disappeared and negative ion generator stops working.after all health

function of the indoor unit being fully canceled,oxygen pump stopped.

After set the right function mode,press health button,remote controller displays " ",now the indoor unit
power lamp turns form orange color to green color,oxygen pump generator starts up to apply oxygen to
indoor.
Press the button again,the sign"

"disappeared .after all health function of the indoor unit being fully

canceled,oxygen pump stopped.

About Health functon(only has oxygen pump fancton):

There is "NEGATIVE ION" function on the WALL MOUNTED type and CABINET type indoor units,
the detailed information of this function please see page 6.
There is "OXYGEN GENERATING" function on this H-MRV system (it's of an optional part system).
The system can generate fresh oxygen to the room space by installing this part system.

About Health functon(If the unit has the function of both "NEGATIVE ION" and "OXYGEN GENERATING")

There have some function buttons in the H-MRV system units that they
are not use.The detailed information is follow:

About Health functon:

HEALTH

CLOCK

6

After turning on the unit and set the desired working mode.
Press the Health button,the LCD will display"

",the unit
begins health operation(start the negative ion generation
device).Press the Health button again,the "

"displayed
on the LCD disappears,health operation is cancelled(turn
off the negative ion generation device).

Note:When indoor fan motor does not work,the unit will autom
atically turn off negative ion generati on device.

About Health operation

After the start of health operation,the negative ion generator
will generate large amount of negative ion,which can
effectively balance the amount of positive& negative ion in
the air and has the bacteria-killing and accelerating the dust
deposition of the room to makethe room air fresh and healthy.

Fresh Air operation

After turning on the unit and set the desired working
mode(the remote controller LCD and control panel LCD
display the working mode).

Press the Fresh air button of the remote controller,the LCD
displays"

",and the unit begins continuous fresh air

operation;press the button again,the"

"in " "flashes
and begin automatic fresh air operation.press the button for
the third time to cancel fresh air function.
Continuous fresh air operation:That is to say,if there is no
intervention,the fresh air operation will continuously run and
not stop.
Automatic fresh air operation:That is to say,the fresh air
operation runs intermittently.After 20 minutes operation,the
fresh air operation will stop for 20 minutes;runs for another
20 minutes,it will stop for another 20 minutes,repeatedly runs.

Health operation

FRESH

HIGH/SO

TIMER

SET

FILTER

B

2

Note:Either in ON or OFF state,the fresh air operation can
be independently set to run.

About Fresh air operation
The ventilation device of this air conditioner can discharge the indoor air to outdoors,while
the outdoor fresh air supplement to indoors,so that fulfills the fresh air function.

Health & Fresh Air operation

1

16 28 31291411 17 21 2423 32 338

5 16 28 31291411 17 21 2423 32 338

5 16 28 31291411 17 21 2423 32 3382

Health Function and Installating the Reciever

HEAT

NOTE:For the HEAT button

This button can only be used for the unit with electric heater function

RESET

LOCK

SLEEP

FAN

TEMP

ON

OFF

SWING

MODE

CODE

LIGHT

A
U
T
O

Remote controller

1.TEMP Setting Button

(Used to set temperature. Setting ranges:
16 C to 30 C)

2.SWING Button

If you press this button once, auto swing will be
activated.
If you press this button again, the louver will fix
in the present position.

3.Power ON/OFF Button

Used for unit start and stop
After power on, the LCD of remote controller will
display the previous operation state (except for
TIMER,SLEEP and SWING state).

4.Operation MODE

Used to select operation mode.
Every time you press MODE button, operation mode
changes according to following sequence:

The function of code A

6.CLOCK Button

Used to set correct time.

7.TIMER Button

Used to select TIMER mode:TIMER ON,TIMER OFF.
(Note: if time of TIMER ON is the same as TIMER OFF)

10.RESET Button

Press this button by using a sharp article to resume the correct
operation of the remote controller in case of need, i.e. for
example in case of malfunctions due to electromagnetic
disturbance.

5.HEALTH Button

13.HOUR Adjustment

Used to set clock and timer setting

8. FILTER Button

Used to set up/down function of filter.

9.CODE Button

Used to select Code A or B, this manual is for code B.

14.HIGH/SO Button

Used to select HIGH or SOFT operation.

11.LIGHT Button

Used to light the control panel (only for cabinet unit)

12.LOCK Button

Used to lock operation button and LCD display contents: by
pressing this button, other buttons comes out of function and
lock state display appears; if you press it again, lock state
will be no more active and lock state display will disappear.

HEAT

COOL

DRY

FRESH

HIGH/SO

TIMER

SET

FILTER

B

A

M D

HEALTH

RESET

LOCK

SLEEP

FAN

TEMP

ON
OFF

SWING

MODE

CLOCK

CODE

LIGHT

OFF

A
U
T
O

25

26

21

23

18

19

22

24

27

20

36

1

2
3
4

6

7

9

10

5

8

34

33

28

32

31

30

35

29

15.SET Button
Used to confirm TIMER and CLOCK settings when
or cooling. heating

16.FRESH Button
Used to set fresh mode, the unit will draw in fresh air.

Parts and Functions

2

22.TEMPERATURE Display

20.TIMER Display

21.FILTER Display

17.SLEEP Button

(The clock must be corrected before setting sleep function)

Used to set sleep mode.

18.FAN Button

Used to select fan speed:LOW,MID,HIGH,AUTO.

19.TIMER OFF Display

When the filter need be cleaned, the sign will
appear automatically.

HEAT

13

17

14

16
15

12
11

37

24.HIGN/SO Run Display

23.AUTO SWING Display

AUTO

FAN

HEAT

COOL

DRY

The function of code B

Auto restart (to be applied for a necessary situation)

:

Setting Method: When the wire remote controller is on (excluding timer mode and fan mode), press
the "SWING" button on the wire remote controller 10 times within 5 seconds, and after the buzzer
rings 4 times, the air conditioner will enter the state of power failure compensation.

Cancel Method: Press the "SWING" button on the wire remote controller 10 times within 5 seconds,
and after the buzzer rings 2 timer, the Auto restart mode will be cancelled.

Notes: When a power failure suddenly occurs during the air conditioner is working after the Auto restart
is set, if the air conditioner will not be used for a long time, please cut off the
power supply to prevent its operation from being resumed after the power is supplied again, or press
the "Switch On/Off" button after the power comes again.

After the Auto restart is set, if power failure suddenly occurs while the air conditioner is
working, it will resume the previous working state when the power is supplied again.

5

1.Unit start
After unit starts,select your desired operation mode(Operation mode
will be displayed on LCD)

2.TIMER mode selection
Press TIMER button on the remote controller to changeTIMER mode.
Every time the button is pressed,display of TIMER mode changes as
follows:

3.Time setting

Timer ON/OFF Function,(Set clock correctly before starting TIMER operation)

ON OFF

TIMER ON

TIMER OFF

blank

Then select TIMER mode as needed

5.Canel TIMER mode

4.Timer confirming

After time setting ,press SET button to confirm time.

Timer ON-OFF Function

After replacing batteries or if apower failure occurs,TIMER setting must be reset.
Remote controller has memory function.When you use TIMER mode next time,just press SET
button after mode selection if timer setting is the same as the previou sone.

FRESH

HIGH/SO

TIMER

SET

FILTER

B

HEALTH

RESET

LOCK

SLEEP

FAN

TEMP

ON
OFF

SWING

MODE

CLOCK

CODE

LIGHT

OFF

1

6

HIG

3

R

7

2

FIL

5

R

4

Press time button
Every time the button is pressed,time increases an hour.If the button
is kept pressed,time will changes quickly.
Every time the button is pressed,time decreases an hour.If the button
is kept pressed,time will changes quickly.It can be adjusted with in
12 hours at will. AM refers to morning and PM refers to afternoon.

Operation

HEAT

Temp.setting +2 C
Temp.setting

On reachingtemp.setting
+2 C, unitwill run in mild
DRYmode.

Ultra-lowair flow