Haier AB072FDBHA, AB092FEAIA, AB092FDAHA, AB092FDBHA, AB092FEBIA Instruction Manual
...
Four way cassette type
AB092FEAIA AB092FEBIA AB122FEAIA AB122FEBIA
AB142FEAIA AB142FEBIA AB162FEAIA AB162FEBIA
AB182FEAIA AB182FEBIA AB242FEAIA AB242FEBIA
AB282FEAIA AB282FEBIA AB322FEAIA AB322FEBIA
AB362FEAIA AB362FEBIA AB452FEAIA AB452FEBIA
TWO way cassette type
AB072FDAHA AB072FDBHA AB092FDAHA AB092FDBHA
AB122FDAHA AB122FDBHA AB142FDAHA AB142FDBHA
AB162FDAHA AB162FDBHA AB182FDAHA AB182FDBHA
AB242FDAHA AB242FDBHA AB282FDAHA AB282FDBHA
Convertible Type
AC092FEAHA AC092FEBHA AC242FEAHA AC242FEBHA
AC122FEAHA AC122FEBHA AC282FEAHA AC282FEBHA
AC162FEAHA AC162FEBHA AC322FEAHA AC322FEBHA
AC182FEAHA AC182FEBHA
Duct Type
AD182FIAHA AD182FIBHA AD242FIAHA AD242FIBHA
AD282FIAHA AD282FIBHA AD322FIAHA AD322FIBHA
AD362FIAHA AD362FIBHA AD452FIAHA AD452FIBHA
Split Type
AS072FAAHA AS072FABHA AS142FAAHA AS142FABHA
AS092FAAHA AS092FABHA AS162FAAHA AS162FABHA
AS122FAAHA AS122FABHA AS182FAAHA AS182FABHA
Ceiling concealed type
AE072FEAHA AE072FEBHA AE122FEAHA AE122FEBHA
AE092FEAHA AE092FEBHA AE162FEAHA AE162FEBHA
AE142FEAHA AE142FEBHA AE242FEAHA AE242FEBHA
AE182FEAHA AE182FEBHA AE242FLAHA AE242FLBHA
No. 0010570352
B
MRV Intelligent Network Indoor Air-conditioner
Please read this instruction manual before using the air conditioner
Please keep this manual carefully and safely.
Cautions
Disposal of the old air conditioner
Before disposing an old air conditioner
that goes out of use, please make sure
it's inoperative and safe. Unplug the air
conditioner in order to avoid the risk of
child entrapment.
It must be noticed that air conditioner
system contains refrigerants, which
require specialized waste disposal. The
valuable materials contained in a air
conditioner can be recycled. Contact
your local waste disposal center for
proper disposal of an old air conditioner
and contact your local authority or your
dealer if you have any question. Please
ensure that the pipework of your air
conditioner does not get damaged prior
to being picked up by the relevant waste
disposal center, and contribute to
environmental awareness by insisting
on an appropriate, antipollution method
of disposal.
Disposal of the packaging of your
new air conditioner
Safety Instructions and Warnings
Before starting the air conditioner, read the
information given in the User's Guide
carefully. The User's Guide contains very
important observations relating to the
assembly , operation and maintenance of
the air conditioner .
The manufacturer does not accept
responsibility for any damages that may
arise due to non-observation of the following
instruction.
Damaged air conditioners are not to be
put into operation. In case of doubt, consult
your supplier .
All the packaging materials employed in
the package of your new air conditioner
may be disposed without any danger to
the environment.
The cardboard box may be broken or cut
into smaller pieces and given to a waste
paper disposal service. The wrapping bag
made of polyethylene and the
polyethylene foam pads contain no
fluorochloric hydrocarbon.
All these valuable materials may be taken
to a waste collecting center and used again
after adequate recycling.
Consult your local authorities for the name
and address of the waste materials
collecting centers and waste paper disposal
services nearest to your house.
Use of the air conditioner is to be carried
out in strict compliance with the relative
instructions set forth in the User's Guide.
Installation shall be done by professional
people, don't install unit by yourself.
Do not damage any parts of the
air conditioner that carry refrigerant by
piercing or perforating the air
conditioner's tubes with sharp or pointed
items,crushing or twisting off the
surfaces. If the refrigerant spurts out
and gets into eyes , it may result
in serious eye injures.
Always remember to unplug the air
conditioner before openning inlet grill .
Never unplug your air conditioner by
pulling on the power cord. Always grip
plug firmly and pull straight out from
the outlet.
All electrical repairs must be carried
out by qualified electricians. Inadequate
repairs may result in a major source of
danger for the user of the air conditioner .
Cautions
For the purpose of the safety, the air
conditioner must be properly grounded
in accordance with specifications.
Do not allow children to play with
the air conditioner. In no case should
children be allowed to sit on the outdoor
unit.
Do not obstruct or cover the ventilation
grille of the air conditioner . Do not put
fingers or any other things into
the inlet/outlet and swing louver .
Specifications
1) The refrigerating circuit is leak-proof.
2)Please keep the air-conditioner under
conditions in the following table during
operation to ensure proper use of it.
Outdoor temperature
(D.B.)
Indoor temperature
(W.B.)
Indoor humidity
Outdoor temperature
(W.B.)
Indoor temperature
(D.B.)
Above-5 C and below 43 C
Above15.5 C and below24 C
Humidity under 80%
Whenever air-conditioner is operating under circumstance with
humidity above 80% for long
term, defrosting shall be formed
and dropped on the machine
surface, mirage shall be blew off
from the outlet.
Above-15 C and below 15.5 C
Above-15 C and Below 28 C
Cooling Heating
3)The wiring diagram refer to the wiring
diagram on the indoor and ortdoor units.
4) If the fuse on electrical heater is
broken please change it with the type
of AC 250V 15A
If the fuse on main circuit is broken
please change it with the same type
ofAC 250V 5A
5)For AS072 ~ 182FA AHA the indoor
unit installation height is at least 2.0m.
1
Important Points of Safety
2
The following four important points of safety and suggestions should be paid great attention:
Comply with the following important points of safety .
Put these important points of attention and suggestions nearby and convenient for reference in need.
Hand over this instruction manual to new user if you resell this machine.
Entrusted Installation
Installation of the machine should be
entrusted to certified person of after
service. Unauthorized installation may
cause water leakage, electric shock or
fire hazard for improper operation.
To prevent leakage of refrigerant, let
certified person of after service do it.
Leakage of refrigerant over certain
consistence may result in shortage of
oxygen. Enough precautions MUST be
done to avoid oxygen shortage in case
of refrigerant leaking if the room where
the air-conditioner is installed is small.
The power supply must be fitted with
earth line to ensure valid earthing of
the air-conditioner. No or incomplete
earthing connection may cause the risk
of electric shock.
Warning
Warning for installation
Warning for use Warning for move and repair
Avoid your body being blown directly by
cold wind for long period, otherwise your
health may be affected.
When you have to disassemble and reinstall
the machine, entrust it to after service.
Improper installation may cause fire hazard,
electric shock or damage of machine.
If something abnormal (e.g.: burnt smell
etc.) occurs, stop running the machine, shut
down the manual power switch and contact
after service. Continuous operation in
disorder may cause fire hazard or electric
shock etc.
Unauthorized alteration or repair work is
strictly forbidden. Improper alteration or
maintenance may cause fire hazard, electric
shock or water leakage. Repair work should
be entrusted to certified person of after
service.
Attention points for installation
Ensure the drainage hose work normally
during installation.
Improper installation of drainage can cause
water leakage and damp articles.
Ensure electric leakage breaker being
installed. Electric leakage breaker MUST
be installed, otherwise electric shock may
be caused.
DO NOT install the machine in place where
flammable gas releases easily to avoid fire
hazard.
If the power supply cord is damaged, call
a certified electrician of the manufacturer
or other maintenance department to replace
it.
Important Points of Safety
3
Warning
Warning
Attention points for use
DON'T lay any burning facilities in place
where winds produced by the machine can
reach. Incomplete combustion of burning
facility may be caused otherwise.
Ensure ventilation of the room if the
machine is used with burning facilities.
Deficient ventilation can cause oxygen
shortage.
DON'T clean the machine with water.
Electric shock may occur otherwise.
Check whether installation bench of the
machine is damaged after a long period
of use. Machine on damaged bench may
fall down and cause human injury or
other damage.
DON'T operate switch with wet hand.
Electric shock may occur otherwise.
Stop operation and shut down manual
power switch before cleaning and
maintenance.
The machine CANNOT be used for the
purpose of preserving food, animals,
plants, precision instruments and artwork
etc., which may be destroyed otherwise.
The power supply MUST be of rated
voltage and connected with special
electrical supply circuit.
DON'T replace fuse with material other
than fuse of proper capacity. Replacing
fuse with metal wire or copper etc. can
cause fire hazard or other faults.
DON'T put flammable spray articles nearby
or spray them to the machine. Fire hazard
may occur otherwise.
In place where winds produced by the
machine can reach, don't lay any animals
or plants which may be hurt otherwise.
Important Points of Safety
4
Attention
Check whether earthing wire is broken or falls off.
Check whether air filter was omitted.
Switch on power supply of the outdoor unit 12 hours in priority to entrust.
During heating program, the machine adopts heat pump mode to release heat indoors with that absorbed from outdoors.
Therefore its heating ability reduces when outdoor temperature descends.
Heat ability
During heat operation, if the outdoor unit is adhered with frosts, the machine will automatically turn to frostremoving operation which lasts about 2~10 minutes.
During frost-removing operation, fan of indoor unit runs at low speed or stops while outdoor unit stops.
To protect the machine, for immediate restart after a stop, the compressor does not run until after a interval of 3 minutes.
All operations will stop when there is a power failure during the machineís running.
Running indicator on remote controller flashes when the system is reenergized after power failure.
Before restart, press on/off button of the remote controller.
Note: If you have set power down memory function, the machine will get back to the status before power failure when it is
reenergized.
Confirmation before running
Removal of frost in heat operation
3 minutes protection
Power failure
Protection setting (High pressure switch)
If something abnormal happens with the machine, the protection setting will act to stop running automatically. Press
ì checkî button on the remote controller to see failure code shown.
Protection setting acts in the following case.
During cool operation
Inlet or outlet of outdoor unit is blocked.
Strong wind continuously blows into the outlet of outdoor unit.
During heat operation
Large amount of dust adheres on air filter screen of indoor unit.
Outlet of indoor unit is blocked.
Air filer of cassette type
Air filter screen must be installed near the inlet when installing air-conditioner of flush type. After trial run
of the machine, verify the following items:
Position where air filter screen is installed How to disassemble the filter How to clean the filter
Operation of fans of units that stop
To protect units that stop during running of other indoor unit, run their fans for 2~8
minutes at an interval of 30 or 60 minutes.
Note:
Confirm failure code shown on the remote controller, shut down power switch and find out reasons after
protection setting works. (check method as seen from " check" on page 21). Continuous operation without
solving problems can cause faults of the machine.
Ensure air filter is installed. Without the filter, dust may accumulate on heat exchanger and cause water
leakage.
Each indoor unit can run individually or many indoor unit run in meantime. However, heat and cool operation
cannot be run at the same time.
Operation Features
5
Loading...