Hafler Trans Nova P7000 Specifications
Amplifier
P7000
CIRCUITRY
• trans• nova Amplifier Topology
• MOSFET Output Devices
• DIAMOND Driver Stage
• Electronic Fuse
• Dual Internal Fans
• Active Crossovers
CONTROLS & INDICATORS
• 3.5” Rack Mount (2-rack spaces)
• Stereo/Bridged Mono/Biamp
• XLR or 1/4” Balanced Inputs
• Gold-Plated 5-Way Binding Posts
• Power Lamp, Signal, Clip, Thermal, Short LEDs
• 1dB Incremental Gain Controls
• Chassis/Float Ground Switch
• Gain Control Security Covers
• Rack Mount Handles
• Serviceable Modules
WARRANTY
• 7 Year Warranty
FEATURES
®
DESCRIPTION
The P7000 trans•nova DIAMOND (patent pending) amplifier is the most powerful and versatile amplifier Hafler has ever made! It features Jim Strickland’ s
trans•nova circuitry (patent #4467288) and his brilliant discovery,
Dynamically Invariant AMplification Optimized Nodal Drive.
The DIAMOND transconductance driver stage com-
bines the linearity of Class A operation with the
current headroom of a Class B system resulting in a significant advancement in the art of
power amplifier design. The sonic result of all
this unique technology is very easily heard. The
P7000 presents a deep, wide sound stage with
incredible musical transparency and detail.
Hafler – One for All! Both powerful and flexible, the P7000 features active
crossovers controlled by our XCard plug-in modules (2 per side) making the
P7000 ideal for bi-amping and a variety of sound reinforcement applications.
Hafler’s new DIAMOND and trans•nova cir cuitry topology in the P7000 r epresents a great sonic advancement over the successful PRO5000, confirming
once again Hafler’s dominance as “the amplifier of choice” to power large
studio reference monitor speakers. The P7000 is also an excellent choice for
cinemas wanting the best possible amplification to reproduce today’s demanding motion picture sound tracks. Amazingly, the P7000 is excitingly appropriate as an amplifier for instruments like bass guitar and keyboards because of its punch, control, and musicality.
Whether used for Sound Reinforcement or fixed installs, Hafler delivers an
experience that no other amplifier can match. Sonics for Audiophiles made
bulletproof for the road!
Bridged
Mono
Normal
P7000
®
signal
clipping
thermal
short
thermal
clipping
signal
short
–3
–6
–10
–1
–15 0dB
channel 1
–3
–6
–10
–1
–15 0dB
channel 2
MADE
USA
IN THE
SPECIFICATIONS
P7000
Power Rating..................................................................... 350 Watts/channel @ 8Ω
500 Watts/channel @ 4Ω*
1000 Watts bridged/mono @ 8Ω*
Total Harmonic Distortion (THD) ................................................<0.2% (20Hz-20kHz)
Signal-to-Noise ..........................................................................100dB “A” Weighted
Full Power Bandwidth..................................................... 0.2Hz to 100kHz (+0/–3dB)
Slew Rate ....................................................................................................... 100V/µs
CMRR (Common Mode Rejection Ratio).............................................. 75dB at 1kHz
Input Impedance ........................................................... 47kΩ per phase balanced
Gain ................................................................................... +15dB min. / +30dB max.
Input Sensitivity Range .................... 850mV to 4.75V (@ 8Ω) per phase balanced
700mV to 4V (@ 4Ω) per phase balanced
Damping Factor..................................................................................... 600 (to 1kHz)
200 (to 10kHz)
25 (to 100kHz)
Power Consumption.......................................... 200W / 2.3A @ 120VAC (idle power)
470W / 5.2A @ 120VAC (1/8 power – 8Ω)
1100W / 12A @ 120VAC (max. power – 8Ω)
Indicators .................................................. Power, Signal, Clipping, Thermal, Short
Dimensions...................................................19”W x 127⁄8”D** x 31⁄2”H (2-rack spaces)
(48.3cm x 32.7cm x 8.9cm)
Net Weight.........................................................................................40 lbs. (18.18kg)
*Continuous power limited by current rating of line fuse. **plus 11/8” for handles
Amplifier
P7000
®
ARCHITECT’S AND ENGINEER’S SPECIFICATIONS
The audio power amplifier shall be solid state design employing 16 lateral
power MOSFET output devices. It shall be constructed on a 16 gauge steel
chassis utilizing forced air cooling and be technician friendly using modular
construction.
Each channel shall be rated for a minimum of 350 watts into an 8 ohm load and
500 watts* into a 4 ohm load with both channels driven. In bridged mono mode,
the amplifier shall produce at least 1000 watts* into an 8 ohm load. A switch
shall be provided for stereo or bridged mono operation and all power ratings
shall be measured from 20Hz-20kHz with less than 0.2% THD.
The amplifier’s back panel shall provide Balanced inputs via combination XLR
and 1/4” phone jacks. The back shall also utilize gold-plated 5-way binding
posts for output connectors and a switch to isolate or connect the signal
ground to the chassis ground. Each amplifier channel shall incorporate dual
2nd order Butterworth crossovers. The amplifier shall include a 3-wire grounded
AC line cord and UI power transformer operating on 120V/60Hz AC mains. An
optional transformer for 230V 50-60Hz operation shall be available.
The amplifier’s front panel shall provide level controls with optional security
covers. The front shall also incorporate a lighted main power switch and
indicators for each amplifier channel. The indicators shall display signal
present when 30mV of signal is detected, signal clipping when distortion rises
above 1%, thermal protection should the heatsink temperature become excessive, and short circuit protection in case a problem on the speaker system
arises.
The amplifier shall fit standard 19” EIA rack mounting requirements utilizing 2rack spaces and have handles. The dimensions shall be 19” Wide, 127⁄8”
Deep**, 31⁄2” High, and be finished in black with a net weight of 40 pounds. It
shall be a Hafler P7000.
*Continuous power limited by current rating of line fuse. **plus 11/8” for handles
15A SLO BLO
CH 2
120VAC/60Hz
1500W MAX
CH 1
(Mono/Biamp)
Audio Ground
Chassis
Stereo Float
Biamp
CH 2
– +
– +
– +
Mono
XCard
Side View
• Set Switches to
Stereo and Normal
• Connect Input Signals
to CH1 and CH2
• Set Gains and Crossovers independently
Stereo:
• Set Switch to
Bridged Mono
• Use CH 1 input ONLY
• Set Gains and Crossovers
on CH 1 ONLY
Bridged Mono:
• Set Switch to
Biamp and Normal
• Use CH 1 input ONLY
• Set Gains and Crossovers
independently
Biamp:
• Remove Cover
• Configure Crossovers as shown
• Each XCard provides 12dB/octave
LP or HP in series
Crossovers:
HP
High-PassLPLow-Pass
FULL
Full Range
3
21
+
–
XLR Connections
Phone Connections
+
–
S/N
!
CH1
4-8Ω
8Ω
4-8Ω
A Division of Rockford Corp.
Tempe, AZ 85281 U.S.A.
Designed & Assembled in the U.S.A.
®
PUSH PUSH
CAUTION:
For continued
protection against
risk of fire, replace
with same type and
rating of fuse.
CAUTION
RISK OF ELECTRIC SHOCK
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
REFER SERVICING
TO QUALIFIED PERSONNEL
LUCASFILM
®
Loading...