Hafler TA-1100 Brochure

The Hafler TA1100 & TA1600 ( Trans*Amp) are two channel,two rack height,convec­tion-cooled (No Fans),MOSFET (Metal Oxide Semiconductor Field Effect Transistor)
power amplifiers.Both amps are suitable for various applications such as:Instrument
amplification,DJ,Monitoring,Live Sound Reinforcement,and Permanent
Installations.

The circuitry used in the TA1600 is the latest refinement of our patented trans*nova
( TRANSconductance NOdal Voltage Amplifier,US Patent 4,467,288) circuit.It has
been proven to offer sound quality to satisfy the most analytic audiophile or the
most demanding professional.The natural sound and realistic reproduction have
made trans*nova amplifiers the choice in critical installations. They have proven
extremely fault tolerant even in abusive situations. This ruggedness enables the
amplifier to drive reactive speaker loads without the performance and sound penal­ties imposed by elaborate protection schemes.

The TA1100 trans*ana (TRANSconduc tance Active Nodal Amplifier) circuitry has
been very successful in bringing new levels of clarity and intelligibility to many
broadcast facilities and headphone monitoring installations.Even at low power lev­els,the trans*ana MOSFET amplifier circuit imitates the accuracy and warmth of its
bigger brother,the TA1600 trans*nova.

Specialized circuits in both amplifiers prevent damage to the amplifiers and speak­ers,without affecting the audio signal.A soft start circuit prevents sending potential­ly destructive turn-on and turn-off transients to the speakers.A thermal sensing net-

work monitors the heatsink and transformer temperature, and shuts down the
amplifier to protect from excessive operating heat. The need for internal fuses has
been eliminated.A sensing circuit monitors the output signal and shuts down oper­ation when it detects a short in the output load.

In addition,LED indicators give a visual representation of the operating status of
each channel.Any type of fault (clipping,short protection,or thermal standby) will
be indicated with a red LED.

Hafler manufactures additional professional and home theatre amplifiers and moni­tors that offer an extreme level of performance and advanced technology.Visit our
website at www.hafler.com for more information

TA1100
TA1600

TA 1100

Power Rating: 1kHz,0.1% THD

50 wpc into 4Ω
40 wpc into 8Ω

Frequency Response: ± 0.1dB,20Hz to 20kHz

+0/-3dB,1.0Hz to 100kHz
Slew Rate: 20V/µs
Input Sensitivity for rated output power:

Unbalanced:0.640V RMS (8Ω),

0.510V (4Ω)Balanced:0.320V (8Ω),

0.250V (4Ω) per phase

Power Consumption: 40VA quiescent

Specifications

546 SOUTH ROCKFORD DRIVE TEMPE, ARIZONA 85281 U.S.A. / 1-866-GOHAFLER WWW.HAFLER.COM

TA1100/TA1600

Signal-to-Noise: >102dB below rated output “A”weighted
CMRR: >65dB at 1kHz
Input Impedance: 47kΩ per phase balanced

47kΩ unbalanced
Gain: 29dB maximum
Damping Factor: 350 (to 1kHz);150 (to 10kHz);18 (to 100kHz)
Controls & Switches: Front Panel:Power Switch and Level Controls
Indicators: Power Lamp, Clip/Thermal/Protect LEDs
Connectors: Input:Balanced:1/4”Tip Ring Sleeve

Unbalanced RCA

Output:1/4”Phone,Spring Clip

Headphone:1/4”

Power:IEC 320
Dimensions: 19”W x 8 1/2”D x 3 1/2”H (2 rack space)

(48cm x 25cm x 8.9cm)
Net Weight: 22 lbs (9.98kg)

TA 1600

Power Rating: 1kHz,0.1% THD

75 wpc into 4Ω
60 wpc into 8Ω

Frequency Response: ± 0.1dB,20Hz to 20kHz

+0/-3dB,1.0Hz to 300kHz
Slew Rate: 100V/µs
Input Sensitivity for rated output power:

Unbalanced:0.780V RMS

(8Ω), 0.620V (4Ω)

Balanced:0.390V (8Ω),

0.310V (4Ω) per phase

Power Consumption: 60VA quiescent