Habey FW-1044 User Manual

www.habeyusa.com www.habeyusa.com

FW-1044

Quick Setup Guide

Packing List

Description QTY

FW-1044 1

VGA Cable 1

Themal Pad 1

Power Cable+Adaptor 1

Rack Mount Ears 2

Rack Mount Screws 4

Safety Warning:
The use and installation of this system should only be performed by
professionals. Improper installation of any electronic device or electrical
component can result in serious injury or death. Please make sure that all
safety precautions are taken into account.

21015 Commerce Pointe Drive, Walnut, CA 91789

Install Guide

Step 1 - Inspect Contents

Unpack all package contents and inspect
each component. Make sure all included
parts and accessories are present.

Step 2 - Remove Top Cover

Using a phillips head screw driver, remove
the six screws on the sides of the enclosure,
and then remove the single screw at the top
rear of the enclosure.

Step 3 - Mounting a 2.5” Drive

Remove the four screws and then remove
the two brackets.

Mount the HDD onto the bracket and then x

it with four screws.

Mount the completed bracket to the
enclosure and connect the SATA cables.