Habey FW-1042 User Manual

www.habeyusa.com www.habeyusa.com

FW-1042

Quick Setup Guide

Packing List

Description QTY

FW-1042 1

Power Cable 1

Rack Mount Ears 2

Rack Mount Screws (Large) 4

Drive Mounting Screws (Small) 4

Safety Warning:
The use and installation of this system should only be performed by
professionals. Improper installation of any electronic device or electrical
component can result in serious injury or death. Please make sure that all
safety precautions are taken into account.

21015 Commerce Pointe Drive, Walnut, CA 91789

Install Guide

Step 1 - Inspect Contents

Unpack all package contents and inspect each
component. Make sure all included parts and
accessories are present.

Step 2 - Remove Top Cover

Using a phillips head screw driver, remove the four
screws on the sides of the enclosure.

Using a phillips head screw driver, remove the
single screw at the top rear of the enclosure.

Step 3 - Mounting a 2.5” Drive

Remove the drive bracket
from the enclosure by
removing the screws at
the base of the bracket.

Mount the 2.5” drive on
the top of the bracket.
Mount the completed
bracket to the enclosure

Step 4 - Mounting a 3.5” Drive

Connect the Power and
SATA Cables,

Remove the drive bracket
from the enclosure by
removing the screws at
the base of the bracket.

Mount the 3.5” drive
on the underside of
the bracket. Mount the
completed bracket to the
enclosure.

Connect the Power and
SATA Cables.