Habey EPC-6668 User Manual

www.habeyusa.com www.habeyusa.com

EPC-6668

Quick Setup Guide

Packing List

Description QTY

EPC-6668 1

Power Cable 1

Power Adaptor 1

Drive Mounting Screws 4

Safety Warning:
The use and installation of this system should only be performed by
professionals. Improper installation of any electronic device or electrical
component can result in serious injury or death. Please make sure that all
safety precautions are taken into account.

21015 Commerce Pointe Drive, Walnut, CA 91789

www.habeyusa.com www.habeyusa.com

Install Guide

Step 1 - Inspect Contents

Step 2 - Remove Top Cover

Step 3 - Install Memory

Unpack all package contents and inspect each
component. Make sure all included parts and
accessories are present.

Using a phillips head screw driver, remove the
four screws on the sides of the enclosure.

Remove the two drive trays as illustrated in the
picture from the enclosure by twisting off the
four screws.

Step 4 - Install a 2.5” HDD

Mount the 2.5” drive between the two trays
with the four screws in the plastic screw
package.

Connect the SATA cable to the complete HDD
.

Mount the complete HDD bracket to the
enclosure.

Locate the memory slot. Ensure memory is
a 204-Pin SO DIMM. Align notch in memory
circuit with corresponding guide on the
memory slot. Insert the memory circut at a 45°

angle and press the circuit at and secure it to

the memory slot with an audible click on each
side of the memory slot.

Step 5 - Hardware Installation Complete

Your system is now ready. Connect the power cable to a power source and
press the power button on the front of the system.