Habey EMB-4500 User Manual

EMB-4500

Owner's Manual

Freescale ARM Cortex™-A9 Powered EPIC Motherboard

Disclaimer

Except for the accessories attached to the product as specified herein, what
is contained in this user manual does not represent the commitments of
Habey USA Company.~Habey USA Company reserves the right to revise
this User Manual, without prior notice, and will not be held liable for any
direct, indirect, intended or unintended losses and/or hidden dangers due to
installation or improper operation.

Before ordering products, please learn about the product performance
from the distributors to see if it is in line with your needs.

The contents of this manual are protected by copyright law. All rights are
strictly reserved. Any form of unauthorized reproduction including but not
limited to carbon copy, facsimile transmission and electronic copy or email is
prohibited.

i

Safety Instructions

1．Please read this manual carefully before using the product.

2．Put all the unused or uninstalled boards or electronic components in a static

dissipative surface or static shielding bag.

3．Always ground yourself to remove any static discharge before touching the

board, to place your hands on grounding metal object for a while or wear a

grounding wrist strap at all times.

4．When taking or fetching the boards or cards, please wear antistatic gloves

and have the habit of holding the boards by its edges.

5．Make sure that your power supply is set to the correct voltage in your area.

Incorrect voltage may cause personal injuries and damage the system.

6．To prevent electronic shock hazard or any damage to the product, please

ensure that all power cables for the devices are unplugged when adding or

removing any devices or reconfiguring the system.

7．To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

8．When adding or removing devices to or from the system, ensure that all the

power cables for the devices are unplugged in advance.

9．To prevent any unnecessary damage to the products due to frequent power

on/off, please wait at least 30 seconds to restart the unit after the shutdown. 10．If

system goes wrong during the operation, do not try to fix it by yourself. Contact

a qualified service technician or your retailer.

11．This product is classified as Class A product, which may cause radio

interference in our living environment. In this occasion, users need to take

measures to handle the interference.

ii

Contents

Section1 Product Introduction .................................................................................................. 1

1.1 Specification .................................................................................................................. 1

Section 2 Motherboard Instructions ........................................................................................... 3

2.1 Interfaces Location & Dimension .................................................................................. 3

2.2 Installation Steps ........................................................................................................... 3

2.3 Jumper Settings ............................................................................................................ 5

2.3.1 COM2 Jumper Setting（J1,J2,J3) ...................................................................... 5

2.4 Interfaces Description ................................................................................................... 6

2.4.1 Serial Ports(COM1_COM5) ................................................................................ 6

2.4.2 SATA Port(SATA) ................................................................................................ 8

2.4.3 USB(USB12, USB34, USB56) ........................................................................... 9

2.4.4 Ethernet(LAN) ................................................................................................... 10

2.4.5 KEY(3x3)........................................................................................................... 10

2.4.6 Audio(AUDIO, Line-out, MIC-in) ........................................................................ 11

2.4.7 Display(LVDS, HDMI1_HDMI2) ........................................................................ 12

2.4.8 (JTCH) .............................................................................................................. 14

2.4.9 Power Interface(PWR, RSASW, PWRSW, LED1) ............................................ 15

2.4.10(J8, J14, J15, J16) ........................................................................................... 16

2.4.11 Front Panel Connector(JFP) ........................................................................... 17

2.4.12 MINI PCIe ....................................................................................................... 18

2.4.13 CAN BUS(J5) .................................................................................................. 18

2.4.14 4-wire Resistance Touch(J4) ........................................................................... 18

Section 3 Software Instructions ............................................................................................... 19

3.1 Android OS .................................................................................................................. 19

3.1.1VGA .................................................................................................................. 19

3.1.2 HDMI ............................................................................................................... 19

3.1.3 LCD ................................................................................................................. 19

3.1.4 USB ................................................................................................................. 19

3.1.5 COM ................................................................................................................ 19

3.1.6 CAN ................................................................................................................. 19

3.1.7 SD Card ............................................................................................................ 19

iii

3.1.8 TF Card ............................................................................................................. 20

3.1.9 SATA HDD ........................................................................................................ 20

3.1.10 WIFI ............................................................................................................... 20

3.1.11 3G .................................................................................................................. 20

3.1.12 Ethernet .......................................................................................................... 20

3.1.13 Audio Card ...................................................................................................... 20

3.2Linux OS ...................................................................................................................... 20

3.2.1VGA .................................................................................................................. 20

3.2.2 HDMI ............................................................................................................... 20

3.2.3 LCD ................................................................................................................. 21

3.2.4 USB ................................................................................................................. 21

3.2.5 COM ................................................................................................................ 21

3.2.6 CAN ................................................................................................................. 21

3.2.7 SD Card ............................................................................................................ 21

3.2.8 TF Card ............................................................................................................. 21

3.2.9 SATA HDD ........................................................................................................ 21

3.2.10 WIFI ................................................................................................................ 21

3.2.11 3G .................................................................................................................. 21

3.2.12 Ethernet .......................................................................................................... 21

3.2.13 Audio Card ...................................................................................................... 21

Appendix ................................................................................................................................. 22

Appendix 1. Glossary ........................................................................................................ 22

iv

Packing List

1

Thanks for purchasing a Habey USA product. Please check the packing list

when you open its package. If you find any defect components or anything

damaged or lost, please contact your vendor ASAP.

■ EMB-4500 Motherboard

1 pcs

Section 1 Product Introduction

2

1.1 Specifications

Dimension

●Dimension: 165mmX115mm

Processor

●CPU: Onboard Freescale Cortex™-A9 i.MX 6.1GHz (Single-core/dual-core/ Quad Core

CPUs)

Memory

●Onboard RAM: default 1GB, DDRⅢ 800，

Display

●Display port: LVDS, 2x HDMI

●LVDS: dual channel 24Bit LVDS with resolution up to 1920×1200@60Hz

●HDMI1: SiI9022A, maximum resolution: 1920x1080@60Hz

●HDMI2: i.MX6 CPU integrated, maximum resolution:1920x1080@60Hz

Ethernet

●LAN Controller: RGMII (Reduced Gigabit Media Independent Interface), PHY Chip. Model

No.:AR8033

●Transfer Rate: 10/100/1000MBps

Storage

● 1x standard 7+15Pin SATA Port

●SD: Micro SD

●FLASH: Onboard 4GB INAND

AUDIO

●Adopt SGTL5000-XNAA3 Audio Controller Chip

●Provide 1x MIC-in, 1x Line-out

●Provide 1x Line-in, 1x Headphone port

3

I/O

●COM: 5x COM. COM2: RS232/RS422/RS485; COM1-5:RS232

●Provide 8x USB 2.0: 2x standard USB2.0,1x mini USB OTG, 3x USB2.Omm pin header,MINI

PCIE base with 1x USB, 1x USB WIFI module.

●Support two-way CAN BUS (optional)

Expansion

●1x MINI PCIe supports WiFi/3G Module

●Onboard SIM card socket supports 3G network, to function by working with MINI PCIe 3G

module.

●Support 16 bit GPIO

●Support 4-wire resistance touch (optional)

Power Supply

●+9~24V Single Power Supply

Watchdog

●Support system reset function

Operating Environment

●Operating Temperature: 0℃~60℃

●Operating Humidity: 5%~95%, non-condensing

Section 2 Motherboard Instructions

4

2.1 Interfaces Location & Dimension

Following picture illustrates the front interfaces location and the dimension of board EMB-4500.

Please pay attention to the installation steps. Improper installation of some components may

lead to system failure.

Note: When installing the board, please wear anti-static gloves in case of any
electrostatic damage caused during the installation.

2.2 Installation Steps

Please follow the steps below to install your computer:

1．Adjust all jumpers onboard EMB-4500 as per the user manual.

2．Install other expansion cards

5

3．Connect all signal line, cables, panel control circuits and power adaptor.