Habey BIS-6636 User Manual

www.habeyusa.com www.habeyusa.com

BIS-6636

Quick Setup Guide

Packing List

Description QTY

BIS-6636 1

Power Cable 1

Power Adaptor 1

HDD Mount Screws 4

Safety Warning:
The use and installation of this system should only be performed by
professionals. Improper installation of any electronic device or electrical
component can result in serious injury or death. Please make sure that all
safety precautions are taken into account.

21015 Commerce Pointe Drive, Walnut, CA 91789

Install Guide

Step 1 - Inspect Contents

Step 2 - Remove Top Cover

Step 3 - Install RAM

Unpack all package contents and inspect
each component. Make sure all included
parts and accessories are present.

Using a phillips head screw driver, remove
the four screws on the sides of the enclosure.

Step 4 - Install 2.5” HDD

Align notch in memory circuit with
corresponding guide on the memory slot.
Insert the memory circut at a 45° angle and

press the circuit at and secure it to the

memory slot with an audible click on each
side of the memory slot.

Using a phillips head screw driver, remove
the three screws on the bottom cover.