Sanitizing
STEAM VACUUM
CLEANER
STEAM AND VACUUM
SIMULTANEOUSLY
SV-60
One incredibly convenient
solution to all your floor
care needs.
User Manual
Copyright ©2010 HAAN® Corporation
Notice
The information contained in this
document is subject to change
without notice.
®
HAAN
Corporation assumes no
responsibility for any errors that may
appear in this document nor does it
make expressed or implied warranty of
any kind with regard to this material,
including, but not limited to, the implied
warranties of merchantability and
fitness for a particular purpose.
HAAN® Corporation shall not be liable
for incidental or consequential damages
in connection with or arising out of the
furnishing, performance, or use of this
document and the program materials
which it describes.
Edition 2, June 2010
Printed in Korea/China
Product manufactured in Korea/China
All rights reserved. No part of this
document may be photocopied,
reproduced or translated to another
language without prior written
consent of HAAN® Corporation.
HAAN® is a registered trademark of
the HAAN®Corporation.
HAAN® engineering clean™ is a
trademark of the HAAN®Corporation.
Introduction
Save time and hassles with the dual-purpose dynamo
that makes vacuuming and steam cleaning your floors
fast and easy.
Congratulations on purchasing the HAAN® SV-60 Steam Vacuum.
It’s one powerful machine that performs double-duty on all your
floor surfaces.
Your SV-60 Steam Vacuum combines the suction of a high-powered
vacuum with the optimal germ-killing power of a steam cleaning
floor sanitizer – to thoroughly clean your floors without two separate
machines. First, the vacuum feature picks up loose dirt. Then with
the press of a button, the steamer heats up to 212°F in under a
minute, to thoroughly clean and sanitize your floors. Use each
function separately, or simultaneously. It’s the only floor care
machine you’ll need!
The HAAN® SV-60 Steam Vacuum is so easy to assemble, you can
put it together and start using it right away – on tile, linoleum,
laminate, vinyl, marble, sealed hardwood… even carpet.
Look for the HAAN® ‘steamlet’ symbol in this manual for Helpful
HAAN® Hints that will help you make the most of your new HAAN
SV-60 Steam Vacuum.
Backed with a one-year limited warranty, your quality HAAN® SV-60
Steam Vacuum is sure to give you years of dependability. And our
Customer Care representatives are available to answer any of your
questions about your new steam vacuum.
Thousands of HAAN® customers have already fallen in love with
quality HAAN® products. We’re confident you will, too.
Thank you again for purchasing the HAAN® SV-60 Steam Vacuum.
The HAAN® Team
®
To enable you to get the most satisfaction from your HAAN® Steam
Vacuum be sure to follow the assembly and operating instructions
included in this manual. Read this manual thoroughly before
assembling your unit.
Pay sp ecifi c a ttention to the produ ct description to familiarize
yourself with all the parts of your
and organize the parts of the unit before assembling. No additional
tools are needed to put the unit together. It is quick and easy.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 1
HAAN
Steam Vacuum. Locate
®
pg 2 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Important Safety Information
!
i
!
!
IMPORTANT
Be sure to read ALL
instructions and warnings
before using your
HAAN®
Steam Vacuum.
WARNING
Risk of electrical shock be sure to read and follow
all instructions and
warnings.
CAUTION
The SV-60 emits steam at
212˚F to sanitize the area
of use. This means the
steam head, pads, unit’s
attachment system and all
the accessories get very
hot during use. Care should
be taken when using this
appliance and DO NOT touch
them during use except in
the approved manner.
Exercise care when changing
accessories and follow
removal/changing instructions
as outlined in this manual.
SAVE THESE
INSTRUCTIONS -
For household use only.
Any other use of this
appliance will void the
manufacturer’s warranty.
FOR HOUSEHOLD USE ONLY
When using your Steam Vacuum, basic safety precautions
should always be observed, including the following:
WARNING – To reduce the risk of fire, electric shock
or injury:
1. DO NOT leave the product unattended with the
power turned on. Unplug the unit from outlet when
not in use and before conducting any maintenance
or troubleshooting.
2. Turn the Steam Vacuum off before unplugging. When
not in use, the product’s power cord should be unplugged.
3. DO NOT service the Steam Vacuum when it is plugged in.
4. DO NOT use with a damaged cord or plug. DO NOT
use the Steam Vacuum if it has been dropped, damaged,
left outdoors or dropped into water. Return to a
service center.
5. Store the product in a place that is out of the reach
of small children and close attention is necessary
when used near children.
6. Use this product only for its intended us and according
to this user manual, and use only authentic product
parts and accessories.
7. DO NOT use in close proximity to flammable materials.
DO NOT use the Steam Vacuum in an enclosed space filled
with vapor given off oil-based paint thinner, some moth
proofing substances, flammable dust or other explosive
or toxic vapors.
8. To unplug the power cord, grasp the plug to remove.
DO NOT pull on the power cord itself. Do not pull
or carry by the cord, use the cord as a handle, close
door on the cord, pull cord around sharp corners or
expose cord to heated surfaces.
9. DO NOT handle the power cord with wet hands.
10. Store the product in a cool place indoors.
11. DO NOT immerse the unit or expose it to rain. DO
NOT use your Steam Vacuum outdoors or in damp areas.
12. DO NOT spray steam in the direction of another
person, animal or electrical outlet.
13. Make sure to unplug the power cord prior to filling
the product with water.
14. DO NOT allow to be used as a toy.
15. Not for space heating purposes.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 3
!
Important Safety Information
WARNING
DO NOT modify the plug.
Improper connection of
the equipment-grounding
conductor can result in a
risk of electrical shock.
To provide continued
protection against risk
of electric shock, connect
to properly grounded
outlet only.
IMPORTANT
Use regular tap water, or if
the tap water in your area is
hard, we recommend you
use distilled/purified water.
Always empty water from
water tank after use.
DO NOT use for any
purpose other than
described in the User’s
Manual.
Keep the work area well lit.
After steam cleaning, place
the Steam Vacuum on the
Resting Pad and wait at
least 5 minutes to allow the
pad to cool before removing
the Ultra-MicroFiber
™
Pad
FOR HOUSEHOLD USE ONLY
16. DO NOT use the product with water that has been
combined with detergent, aromatic perfumes, oils,
alcohol, rinse and/or any other sort of chemicals.
Use water only. Use regular tap water or distilled/
purified water if the tap water in your area is very hard.
17. To refill the product with water during use, follow
the directions on pg 12. Unplug the product before
attempting to add water.
18. The product and accessories become hot during use.
Exercise care when changing accessories and follow
removal/changing instructions as outlined in manual.
Do not try to fasten or remove accessories during operation.
Scalding may occur if this is done while appliance is active.
19. Use only manufacturer’s recommended attachments
— use of attachments not provided, approved or sold
®
by HAAN
will void warranty.
20. If the circuit breaker activates while using the steam
function, discontinue product use immediately and
contact the customer support center (Beware of the
risk of electrical shock.) To avoid circuit overload, do
not operate another appliance on same circuit as the
Steam Vacuum.
21 DO NOT allow the product to be disassembled and/or
modified by anyone other than an authorized HAAN®
service technician. Doing so can result in fire and/or
electrical shock and would void warranty.
22.Use only on flat, horizontal surfaces. DO NOT use
on walls, counters or windows.
23. Never leave the Steam Vacuum in one spot on any
surface for any period of time. When resting or in between uses, always place the Steam Vacuum on
the Resting Mat and make sure the unit is turned OFF.
24. Extreme caution should be exercised when using
the Steam Vacuum to clean stairs.
25. Never use the Steam Vacuum on hard surface flooring
without the Pad Tray and Ulta-MicroFiber™ Pad.
26. Avoid picking up hard, sharp objects with the Steam
Vacuum, including broken glass. They may damage
the unit.
may cause fire, electric shock or injury and
pg 4 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Important Safety Information
!
i
!
IMPORTANT
Be sure to read ALL
instructions and warnings
before using your
HAAN® Steam Vacuum.
IMPORTANT
FOR HOUSEHOLD USE ONLY
27. DO NOT use without the Dust Collection Bin or
HEPA filter in place. Empty the dust cup frequently
when picking up very fine materials such as powder.
28. DO NOT put any object into openings on the unit not
designated for that object. DO NOT use the unit with
any openings blocked.
29. DO NOT use to pick up anything burning or smoking,
such as cigarettes, matches or hot ashes.
30. Connect to properly grounded outlets only. See
Grounding Instructions below.
Grounding Instructions:
The HAAN® SV-60 must be connected to a grounded (3-prong)
wiring system. Grounding provides a safe path of least
resistance for electrical current, in the event the unit should
malfunction or break down, thereby reducing the risk of
electrical shock. The cord for this product has an equipmentgrounding conductor and a grounding plug. Do not plug it into
an outlet that is not properly installed and grounded in
accordance with all local codes and ordinances.
Grounded
Pin
WARNING
Risk of electrical shock be sure to read and follow
all instructions and
warnings.
SAVE THESE
INSTRUCTIONS -
For household use only.
Any other use of this
appliance will void the
manufacturer’s warranty.
Check with a qualified electrician or service person if you
aren’t sure if the outlet is properly grounded. If it will not
fit the outlet, have a proper outlet installed by a qualified
electrician. This appliance is designed for use on a nominal
120-volt circuit and has a grounding attachment plug as
illustrated above. Make certain that the appliance is connected
to an outlet having the same configuration as the plug. No
plug adapter should be used with this appliance.
Grounded
Outlet
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 5
Product Description
SV-60
11
12
SANITIZING
STEAM VACUUM CLEANER
1
2
3
10
4
7
8
5
6
9
14
15
13
17
16
FEATURES:
1. Handle - with ergonomic pistol grip to reduce hand and wrist stress.
2. Pivoting Power Cord Wrap - rotates 360˚ to release cord with a flick of the wrist.
3. Power Cord Management System - keeps your pathway clear.
4. Power Cord with Flexible Cord Support - double-insulated cord with a 3-prong
plug complete with a flexible cord support strengthens cord connection.
5. Water Tank Release Button - pops tank off for easy filling at the tap.
6. Water Tank Cap with Tether - open cap to fill tank with water and tether
prevents loss of cap
7. Removable Water Tank - goes to the sink for easy filling and allows for 40
minutes of continuous steam on just one tank.
pg 6 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
8. Water Tank Level Indicator - a clear plastic window lets
you see how much water is in the tank.
9. Power/System Indicator - steam and vacuum cleaning
functions can be used simultaneously or individually at
the push of a button.
10. STEAM Light (Orange) - lights up when the steam
switch is turned on.
11 . POWER Light (Red) - lets you know when the unit
is plugged in.
12. VACUUM Light (Green) - lights up when the vacuum
switch is turned on.
13. Dust Collection Bin -lifts out for easy bag less dirt
removal.
14. HEPA Filter - lifts out for to replace filter when
necessary.
15. Lower Cord Hook - to wrap cord for convenient storage.
16. Wheels - soft urethane wheels facilitate easy movement
as well as low noise.
17. Wet Vac Motor - enables dry and wet cleaning.
Make sure to check for the following accessories!
18. Ultra-MicroFiber™ Pad (2) - patented super-absorbent
Ultra-Microfiber Pads lock in dirt and leave floors dry to
the touch. Specially designed for ‘No-Touch’ attachment
and removal.
19. Floor Protector/Resting Mat (1) - for use when heating
up your floor sanitizer or when taking a break from active
cleaning. Use with Pad Tray for hard surface floors.
20. High Pile Carpet Tray (1) - increases the height of the
vacuum for use on higher pile carpets.
21. Pad Tray (1) - used to attach the Ultra- MicroFiber™
Pads before steaming hard surface floors.
20
18
19
21
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 7
Assembling Your HAAN® Steam Vacuum Cleaner
1 ➟ 2
Ready to Go
Align the lower end of the
2
aluminum pole with the lower
locking pin on the side; line
up grooves inside the white
plastic pole base and snap
it into place.
➟
➟
1
Look for the narrow end of the
aluminum pipe; align the black
pistol grip handle with the locking
pin; hold the pin down; insert the
pole and snap it into place.
➟
Locking
Pin
Locking
Pin in
place
Lower
Locking
Pin
pg 8 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Using Your Steam Vacuum Cleaner
!
!
IMPORTANT
CAUTION
The SV-60 emits steam at
212°F to sanitize the area
of use. This means that the
steam head, tray and pads
get very hot during use. Care
should be taken when using
this appliance and DO NOT
touch those areas during
use except in the approved
manner as outlined in this
manual.
Operating Instructions:
Before using your Steam Vacuum Cleaner
• BesuretoreadALLinstructionsandwarnings
before using your HAAN® Steam Vacuum Cleaner.
• YourSV-60SteamVacuumisdesignedtoclean
hard floor surfaces that will withstand high
heat. DO NOT use on unsealed wood or unglazed
ceramic floors. On surfaces that have been treated
with wax or some no-wax floors, the sheen may
be removed by the heat and steam action. It is
always recommended to test an isolated area of
the surface to be cleaned before proceeding. We
also recommend that you check the use and care
instructions from the floor manufacturer.
NOTE: After each use, completely empty any
remaining water from the internal tank. Cool the
SV-60 Steam Vacuum for at least 30 minutes after
use. Water can be emptied by removing the tank
and emptying the excess water into the sink.
• Removeallpartsfrompackageandassemblethe
unit as described on page 8.
CAUTION
Use a grounded receptacle.
Use only a heavy d uty
extension cord rated for 15
amps minimum – DO NOT
use an ordinary extension
cord. To provide continued
protection against the risk of
electric shock, connect to a
properly grounded outlet only.
IMPORTANT
This product is NOT for
space heating purposes.
Always be sure that
your Steam Vacuum is
UNPLUGGED from the
wall receptacle prior to
filling the water tank.
Using Your Steam Vacuum Cleaner:
Vacuum Only Function:
1) Plug your unit into a grounded receptacle. The
POWER light will light up RED to indicate that
the power is ON. (Fig 1)
2) Press the VACUUM button on the center control
to start the vacuum function. The VACUUM light
will light up GREEN and the unit will begin to
vacuum. (Fig 2)
3) Move the unit back and forth over the area to be
vacuumed and continue until the area is clean.
Fig 1
ON
Fig 2
ON
Push
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 9
Fig 3
Release
Fig 4a
Fig 5a
Fig 7
a
b
Fig 8
Tank
Fig 4b
Fig 5b
MAX
Fill
Operating Instructions: (cont)
Using Your Steam Vacuum Cleaner:
STEAM Only Function:
4) Before using the Steam Function you need to fill
the water tank. Press the Release button (Fig 3)
to remove the tank. Pull up and out. (Fig 4a & 4b)
5) Open the water tank cap (Fig 5a) and fill the water
tank directly with water up to the maximum
indicator line visible on the clear plastic tank
window. (Fig 5b) Then make sure to secure the cap
back on the water tank. Twist the water tank cap
slightly left and right to push closed. If the water
tank cap cannot be closed securely, lightly wet the
rubber portion of the cap and close. The use of
distilled water is recommended, especially in areas
of hard water. Replace the tank by snapping it back
into place on the body of the SV-60.
6) In order to use the STEAM function you need
to put the Pad Tray on the bottom of your unit
to hold the Ultra-MicroFiber™ Pad in place.
7) There are 4 raised buttons on the underside of
the base of the SV-60 that correspond to indents
in the top side of the Pad Tray. (Fig 7a & 7b)
8) Set the Pad Tray on the floor with the indents
facing up. Align the buttons and press together
until you hear the tray snap into place. (Fig 8)
The Pad Tray has the required ‘nubs’ to hold the
Ultra-MicroFiber™ Pad in place once the unit is
ready to steam.
9) Set the SV-60 upright on the Resting Mat.
10) Plug your unit into a grounded receptacle. The
POWER light will light up RED to indicate that
the power is ON. (Fig 9)
11) Press the STEAM button on the center control
to start the steam function. The STEAM light
will light up ORANGE and the unit will begin to
heat. (Fig 10) Leave the unit on the Resting Pad for
the time it takes (under 1 minute)for the unit
to be ready to steam. The unit is ready when you
Fig 9
ON
Fig 10
ON
Push
pg 10 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Fig 11
Fig 12
Fig 13
Correct Pad
Placement
Steam Jets
Vacuum Area
Clear
Fig 14
WRONG Pad
Placement
Vacuum Area
Covered
WRONG Pad
Placement
Pad Not
Centered
Operating Instructions: (cont)
see sweating on the surface of the Resting Mat and
steam being emitted from the bottom of the SV-60.
12) Place an Ultra-MicroFiber Pad on the floor with the
hook and loop side facing up and the microfiber
side down. Once the SV-60 has heated up, lift it
off the Resting Mat and place it on top of the
Ultra-Micro-Fiber™ Pad. (Fig 11)
13) Move the SV-60 over the floor in a back and forth
motion sanitizing your floor with steam. The
super-absorbent pad soaks up the moisture
leaving your floors dry to the touch. (Fig 12)
HAAN® Helpful Hints:
To use the Pad Tray and Ultra-MicroFiber™ Pad
most effectively:
•BesuretoalignthePadTrayonthebaseofthe
unit with the center of the Ultra-MicroFiber™ pad
when affixing the pad. Notice the blue center strip
on the attachment side of the pad; this strip should
line up with the opening for the steam jets. (Fig 13)
• Besurenottoblockthesuction/agitatorbrush
opening. Blocking the opening could result in the
weakening of suction. (Fig 14)
• Forinitialsteamgeneration,placetheunitonthe
Resting Mat before attaching the Ultra-MicroFiber™
Pad. During initial heating cycle the heated water
may cause condensation which could soak your pad.
Once the unit has built-up the steam needed to
effectively sanitize, place the unit on a dry pad to
absorb the moisture as you use it to clean the floor.
•Afterafxingthecleaningpad,makesuretoplace
the SV-60 on the floor protector pad between uses,
or while cooling, to protect your floor. Never leave
the Steam Vacuum in one spot on any surface for
any period of time.
•Pushandpulltheunitslowly across the floor to
thoroughly clean each section.
•DONOTplacetoomuchforceonthepolewhen
pushing the unit, whether on the carpet or hard
surfaces. The SV-60 will glide across your floor
more easily if you lower the angle of your pole.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 11
Using Your Steam Vacuum
!
!
Using the Steam & Vacuum Function Together:
Fig 15
ON
Fig 16
All
ON
Push
Both
Fig 17
CAUTION
Never use with detergents
and/or soapy water in the
water tank. Using the Steam
Vacuum other than as
recommended in this manual
could damage the unit
and void the warranty.
CAUTION
The SV-60 emits steam at
212°F to sanitize the area of
use. This means that the tray
gets very hot during use. Care
should be taken when using
this appliance and DO NOT
touch the tray during use. Allow
the tray to cool before removing.
high-powered vacuum with the optimal germ-killing
power of a steam cleaning floor sanitizer – to thoroughly
clean your floors without two separate machines. Use
each function separately, or simultaneously.
14) In order to use the Vacuum and Steam function
simultaneously you need to be sure there is water
in the tank. Follow the filling instructions as
outlined in steps 4 & 5 on page 10.
15) Set the SV-60 upright on the Resting Mat.
16) With the unit sitting on the Resting Mat, plug
your unit into a grounded receptacle. The POWER
light will light up RED to indicate that the power
is ON. (Fig15)
17) Press the STEAM and VACUUM button on the
center control to start the dual function. Pressing
BOTH will light up the STEAM (Orange) and the
VACUUM (Green) indicator lights. (Fig 16.)
18) Leave the unit on the Resting Pad for the time (under
1 minute)it takes for the unit to be ready to steam.
The unit is ready when you see sweating on the
surface of the Resting Mat and steam being emitted
from the bottom of the SV-60.
13) You are now ready to vacuum any surface in your
home and sanitize them at the same time. Move
the unit back and forth over the area to be vacuumed
and sanitized. (Fig 17)
15) If the Steam function has been used, allow the unit
to cool down before proceeding, for approximately
5 minutes.
16) To add water, follow steps 4-5 on page 10 and
refer to Fig. 3-5b on the same page.
17) After filling the water tank, set the SV-60 upright
on the Resting Mat.
18) Plug the unit in and proceed to use the unit as
described in the instructions for the function
you choose.
Your SV-60 Steam Vacuum combines the suction of a
Adding Water During Use:
14) Turn power OFF.
pg 12 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Operating Instructions: (cont)
5-10x
Thinner
than
Microfiber
Flax
Wool
Cotton
Silk
Microfiber
HAAN Ultra-Microfiber
Carpet Tray for Higher Pile Carpets:
Fig 18
Fig 19
IMPORTANT
You MUST use the Pad Tray
with the Ultra-Microfiber™
Pads when using the SV-60
on hard surface floors.
Make sure you always start
with completely dry pads.
The pad will absorb moisture
as it cleans. Once it becomes
damp, replace it with a dry pad.
Never leave your UltraMicroFiber™ Pad on your
SV-60 Steam Vacuum when
you have finished using the
unit. Once the unit has cooled,
remove the pad before storing
the SV-60.
Always place your SV-60 on
the Resting Mat while it is
cooling down to protect your
floors.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 13
Because the SV-60 Steam Vacuum does not have the
ability to adjust the height of the vacuum base, there
is an optional tray designed to accommodate higher
pile carpets.
To Attach the High Pile Tray:
1) Turn power OFF.
2) There are 4 raised buttons on the underside of
the base of the SV-60 that correspond to indents
in the top side of the High Pile Tray. (Fig 18)
3) Set the Pad Tray on the floor with the indents
facing up. Align the buttons and press together
until you hear the tray snap into place. You are
now ready to use the SV-60 on higher pile.
HAAN® Ultra-MicroFiber™ Pads:
What is an ultra-microfiber?
An ultra-microfiber is a textile fiber that is thinner
than a microfiber. The Ultra-MicroFiber™ by HAAN®
Corporation is 5-10 times thinner than common
microfiber providing for a significantly higher thread
count in the same surface area. The thinner and
higher the thread count, the greater the absorption.
The HAAN® ultra-microfibers are so thin that more
dirt and dust gets trapped between the fibers, making
your cleaning easier and less time-consuming. (Fig 19)
The ultra-microfiber pad is made up of multiple
layers of super absorbent material. The outer layer
is ultra-microfiber on one side and a “hook & loop”
system on the other side that attaches easily to the
underside of the steam head after the Pad Tray is
attached (see directions on pages 10-11). Simply place
the pad on the floor with the “hook & loop” side
up, and lightly press the SV-60 Steam Vacuum onto it.
As high temperature steam passes through a pad to
contact the floor to kill germs, molds and mites. It is
natural that the pad gradually absorbs moisture. After
a certain length of time, the pad repels water and
becomes damp. When the pad becomes saturated,
turn the unit OFF and wait until the unit cools down
for approximately 5 minutes. Put your foot on a corner
of the pad and lift the SV-60 off the pad. Replace
with a dry pad, turn the unit back on and continue.
To keep the floor clean and dry, replace the pad
when it is dirty and/or saturated.
Care and Maintenance
Fig 20
Dust
Collection
Bin
Fig 21
indent
Fig 22
Turn levers out to open
Fig 23
indent
Slide up
and out
Dust Collection Bin Cleaning and Assembly:
Make sure to use the product with the rectangular
filter in place properly, as doing so without it can
cause motor damage. Using the SV-60 without
the filter in place could void the warranty.
• CleanouttheDustCollectionBin(Fig20)when
suction becomes weaker than normal and/or the
sound of the motor becomes louder than usual.
• AftervacuumingwiththeSV-60itisrecommended
to remove the Dust Collection Bin and filter and
rinse it thoroughly. (Suction can be weakened
when the Dust Collection Bin is full.)
Disassembly Instructions:
1) Grasp the Indent Guides on each side of the
Dust Collection Bin and raise the cartridge
upward. (Fig 21)
2) After carefully turning the Dust Collection Bin
cover over, turn the white levers on each side
to point outward.(Fig 22)
3) Grasp the case and detach the clear cover being
careful not to spill the dirt inside.
4) Grasp the rectangular filter and remove by
sliding upward. (Fig 23)
5) Clean the filter under running water.
7) After cleaning, place the filter in a well ventilated, shaded area and reassemble when
fully dry. (Suction is weakened if reassembled
while still wet.)
Assembly Instructions:
Fig 24
pg 14 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
(Suction is weakened if the Dust Collection Bin is
improperly assembled. Follow the instructions carefully for
optimum use)
in the cover and slide in completely.
2) Align the clear cover and press firmly into
place. Suction can be weakened if the seal
is not tight between the case and the cover.
3) Turn the white levers inward to lock the case
and cover. Be sure the levers are completely
within the cover in the closed position.
(Fig 24)
4) Firmly press the Dust Collection Bin back
into the SV-60 base.
1) Align the rectangular filter with the guides
Care and Maintenance: (cont)
Fig 25
Fig 26
Out
®
HELPFUL HAAN
Your Ultra-MicroFiber™ Pad
is machine washable. You
may dry your them in a
machine dryer on a low
setting, but for longer life,
we recommend air drying.
HELPFUL HAAN® HINT:
DO NOT use fabric softener
when washing the UltraMicroFiber™ Pad as this will
compromise the absorbency
of the material.
Fig 27
HINT:
HEPA Filter Cleaning and Assembly:
Disassembly Instructions:
1) Grasp the release on the HEPA Filter cover;
squeeze and hold the tab. This will release
the cover and allow you to lift the cover OFF.
This is located on the rear of the unit. (Fig 25)
2) Remove the HEPA filter. (Fig 26)
3) Remove the dust from the filter by gently tapping
the side of the filter against the inside of a trash
container. If this does not dislodge the dust, gently
brush the surface with a damp (not wet) cloth.
Allow the filter to dry completely before
reinstalling it.
4) Should the HEPA filter show excessive dust,
wash the HEPA filter with running water and
place it in shady, well-ventilated location to
dry completely before reinstalling the filter.
Assembly Instructions:
place in the opening at the back of the SV-60.
2) Grasp the Release Tab on the cover. While
squeezing the tab, slip the bottom edge into
the opening first and then push the cover into
place until it clicks into place. Release the tab
to lock the cover.
1) When the filter is completely dry, slip it into
Care and Storage of Ultra-MicroFiber™ Pads:
• WhenyouhavenishedusingtheSV-60,turntheSteam
Vacuum OFF and unplug the unit from the electric outlet.
• Ifyouhaveusedthesteamfunction,placetheunit
on the Resting Mat to cool down. Allow it to cool
for about 5 minutes before removing the Ultra MicroFiber™ Pad. Remove the pad by placing your
foot on a corner of the pad and lifting the SV-60
off the pad.
• AfterremovingtheUltra-MicroFiber™Pad,soakit
in cold or lukewarm water with a mild detergent or
hand wash them. NEVER use bleach or fabric softener
when cleaning the Ultra-MicroFiber™ Pad. The pad
can also be washed in a washing machine set on the
gentle cycle. (Fig 27) We recommend that you air-dry
the pads for 24 hours, but they can also be dried in
a clothes dryer on a low heat setting.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 15
Care and Maintenance: (cont)
!
!
Fig 28
CAUTION
Always be sure that your
Steam Vacuum is UNPLUGGED
from the wall receptacle prior
to cleaning or before emptying
the water tank.
IMPORTANT
DO NOT immerse your
SV-60 Steam Vacuum in
water or any other liquid.
CAUTION
Keep the Lime & Scale
Remover in a cool place.
Keep out of the reach of
children. DO NOT injest.
®
The HAAN
Remover is only for use
with the HAAN
Cleaners.
Lime & Scale
®
Steam
Care and Storage of SV-60 Steam Vacuum:
• Alwaysemptyanywaterfromthewatertankonce
you have finished using your Steam Vacuum.
• PreparetostoreyouSteamVacuumbyloopingthe
power cord around the pivoting cord wraps found
on the handle/pole and snap the plug securely onto
the cord when complete. (Fig 28)
• TocleanthebodyoftheSV-60SteamVacuum,
wipe it down with a damp (not wet) soft cloth.
• Storetheunituprightinaprotecteddryarea,
standing it on the Resting Mat.
Mineral Deposits:
One problem with a steamer appliance is the mineral
deposits caused by the high mineral content in many
municipal water supplies. Mineral residue inside of
the internal pipes and heater can cause intermittent
steaming or, in some cases, no steam at all.
To reduce or eliminate the occurrence of mineral deposits,
we recommend the use of de-mineralized or distilled
water in the unit. However, regular tap water may be
used.
If regular tap water is used, we recommend the use of
a ‘Lime & Scale Remover’ every 2 or 3 months to
ensure optimum functionality from your HAAN Steam
Vacuum. 12 packets come included with each new
SV-60 Steam Vacuum and you can purchase these
®
directly from the HAAN
below).
How to use the Lime & Scale Remover:
1. Pour 1 cup of water (8 oz.) into the water tank.
2. Add the Lime & Scale Remover to the water in
the tank.
3. Lift the unit and gently shake the water tank
to dissolve the remover.
4. Use the Lime & Scale Remover once a month
to ensure optimum function from your HAAN
Steam Vacuum.
web site (see web address
®
pg 16 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Care & Maintenance
HAAN
• TheSV-60maybeusedtoremovefreshstainsfrom
carpet. While you normally do not need to use the
Pad Tray and Ultra-MicroFiber™ Pad while vacuuming
or steaming carpet, you may use both the Pad Tray
and Ultra-MicroFiber™ Pad to remove fresh stains
from carpet. The pad acts as a “blotter” of sorts, to
remove most fresh, wet spills and stains.
First, fill the SV-60 water tank. Snap the tank back
into place. Place the Pad Tray and an Ultra-Microfiber™
pad on the bottom of the SV-60 unit. Plug the unit
in and press the STEAM button. It takes about 40
seconds for the unit to heat up.
Place the unit over the stain and hold it in place
for a few seconds to allow the steam to penetrate
the area of the stain.
Push and pull the SV-60 slowly across the area to
work the steam into the stain. The pad’s absorbency
will work to ‘blot’ the stain from the carpet.
When you have finished using the unit, turn it OFF
and place it on the Resting Mat. Allow the unit to
cool down for approximately five (5) minutes before
removing the Ultra-Microfiber pad from the base.
• Youdonothavetouseabroomanddustpantoclean
up loose dirt from your hard surface floors before
using the SV-60 Steam Vacuum. The unit acts
independently as a vacuum or a steamer or both. For
optimal performance, we recommend using the vacuum
and steamer functions of the SV-60 simultaneously.
• ToensurethebestresultswhenusingyourSV-60,
push the Steam Vacuum forward and backward in
slow, even strokes.
Helpful Hints:
®
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 17
pg 18 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Troubleshooting
This chapter summarizes the most common problems you
could encounter with your SV-60 Steam Vacuum. Please
read the different sections for more details. If you are unable
to solve the problem, please contact our Customer Care
Representatives at 877-HAAN DIRECT (877-422-6347)
PROBLEM: When first using steam, the pump makes a
thumping or clicking noise.
Possible Cause:
1) The pump emits some noise during the
initial use of steam. This is normal until
water flows through the system.
2) The pump emits noise when all the water
in the tank has been used.
3) The water tank is not installed correctly
or hasnot snapped into place.
Possible Solution:
1) Check the water level in the tank.
2) Fill the tank with water.
3) If the noise persists longer than 1 minute,
remove the water tank and reinstall it being
sure the tank has snapped firmly into place.
PROBLEM: The Steam Vacuum does not emit steam.
Possible Cause:
1) No water in water tank.
2) No power.
3) Steam button not depressed.
Possible Solution:
1) Check to see if power supply voltage is 120V.
2) Be sure the plug is securely inserted in the
outle and power is on.
3) Remove and water tank, check water level
and if needed, add water. Be sure it is properly
set and snapped into place.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 19
Troubleshooting (cont.)
PROBLEM: An excessive amount of water leaks
during use.
Possible Cause:
1) Too much water added to the tank.
2) Ultra-MicroFiber Pad is soaked.
Possible Solution:
1) Check the water level in the tank.
2) Replace the soaked pad with a dry one.
PROBLEM: The air vented by the cleaner has an odor.
Possible Cause:
1) New products can emit a rubbery smell for
a short time after purchase.
2) Odors can arise if the Dust Collection Bin
is not cleaned for a long time.
Possible Solution:
1) Clean out the Dust Collection Bin and filter.
PROBLEM: The suction is not working.
Possible Cause:
1) Ultra-MicroFiber™ Pad incorrectly placed on
Pad Tray and is blocking vacuum vent.
2) Dust Collectionn Bin is full or not properly
closed.
3) Something is blocking the vacuum vent.
Possible Solution:
1) Be sure the cleaning pad is affixed correctly
in the proper alignment. Incorrect placement
can result in the pad blocking the suction
opening. See page 11.
2) Check to see if the Dust Collection Bin and
filter is in need of cleaning.
3) Check to see if any foreign object is lodged
in the vacuum vent and if so, dislodge it.
pg 20 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Troubleshooting (cont.)
PROBLEM: The sound of the cleaner during use is strange.
Possible Cause:
1) This problem may occur if the suction
function is not working properly.
Possible Solution:
1) Check to see if the Dust Collection Bin and
filter is in need of cleaning.
2) Verify that all parts are firmly in place (such
as the clear cover on the Dust Collection Bin)
3) Check to see if any foreign object is lodged
in the vacuum vent and if so dislodge it.
PROBLEM: During vacuum use, air is emitted via the
opening of the Dust Collection Bin.
Possible Cause:
1) This air is from the suction opening when
the motor is operating. It is not harmful in
any way to the product or user.
PROBLEM: Steam Vacuum left a white spot on the floor.
Possible Cause:
1) The unit was left in one spot too long.
2) The unit was not placed on the Resting Mat
while not in use.
3) The water in the tank is too hard and is
leaving behind mineral residue.
Possible Solution:
1) NEVER leave the Steam Vacuum in one spot
on any surface for any period of time.
2) When resting or in-between uses, always
place the Steam Vacuum on the Resting Mat
and make sure tht the unit is turned OFF.
3) HAAN
distilled water in the SV-60 when the water
in the area is hard.
®
strongly recommends the use of
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 21
Questions
QUESTION: I have extra high-pile carpet, will the SV-60
?
Steam Vacuum work on my carpet?
While the SV-60 is designed to glide easily across low-pile
carpets and hard surface floors, a High-Pile Carpet Tray is
included to make the SV-60 more effective on higher-pile
carpets. See page 13 for directions on using it.
QUESTION: Does the SV-60 Steam Vacuum clean grout?
?
Yes, but it needs a little help. If you glide your SV-60 over
the problem grout areas and then scrub them with a microfiber pad, it should effectively clean your grout.
QUESTION: Will the SV-60 Steam Vacuum replace my
?
regular vacuum cleaner?
Yes, you may choose to use only the VACUUM function of
your SV-60. We’ve developed a sophisticated system that
uses air power to turn the vacuum dust brush, so it does
not draw wattage away from the suction power.
QUESTION: Can the HAAN® SV-60 Steam Vacuum be
?
used on laminate flooring?
YES! The SV-60 Steam Vacuum was designed for use on
sensitive flooring like laminates, as well as vinyl, tile,
marble, hardwood and other sealed hard surface floors. The
SV-60 emits steam at 212°F. Our finer vapor-like steam is
gentler than those that simply blast high wattages of steam
and water across your floor.
QUESTION: The HAAN® SV-60 Steam Vacuum is leaving
?
my floor wet. Why and what can I do about it?
The Ultra-MicroFiber™ Pad may be too wet and needs to
be changed. For optimal performance, the pad should be
changed after 10 minutes of use.
pg 22 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Questions
QUESTION: Sometimes my Steam Vacuum becomes hard
?
to push – why?
If the unit is hard to push, it is likely because the UltraMicrofiber pad is too wet or the angle at which you are using
the unit is too high. The SV-60 Steam Vacuum is easier to
push as you lower the handle.
QUESTION: How long does a tank of water last?
?
Because the SV-60 has a high-capacity water tank, a full tank
of water will last approximately 30-40 minutes, allowing you
to clean several rooms with just one tank.
QUESTION: Do I have to use distilled water in my HAAN
?
SV-60 Steam Vacuum?
We recommend distilled water, but you may use tap water,
unless you have hard water in your area. Using hard water
will shorten the life of your appliance.
QUESTION: Why do I have to use the Pad Tray for my
?
hard surface floors?
Because the SV-60 is both a vacuum and a steamer, the base
of the unit features a brush designed to pull the dirt off of
carpet while the vacuum function is in use. To protect your
hard surface floors, you need to use the Pad Tray and an
Ultra-Microfiber pad when using the SV-60 on them.
®
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 23
Specifications
Product Specications: Model SV-60
Color : White & Black with Gold and Silver Accents
Size: 49.2"
Weight: 11.8 lbs
Voltage/Hz: 12 volts / 60 Hz
Wattage: 1440 watts
Cord Length: 19′ 8″
Tank Capacity: 18.59 fluid ounces (550 ml)
Heat-up Time: under 1 minute
Operating Time: 30-40 minutes before refill is needed
*Dimensions approximated. Dimensions include base and measured without hose, steam head or attachments.
h x 11.6"w x 9.1"d
pg 24 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Warranty
One-Year Limited Warranty
Your HAAN® Floor Sanitizer is warranted to be free from
defects in material and workmanship for a period of one (1)
year from the date of purchase when utilized for normal
household use by the original purchaser only. The included
Warranty Registration Card should be filled out and returned
within thirty (30) days of purchase. This will register your
product. Should any defect covered by the terms of the limited
warranty be discovered within one year, HAAN® Corporation
will repair or replace the defective part, provided the unit
is returned by the original purchaser, freight prepaid, to:
HAAN® Corporation, 1866 Colonial Village Lane, Lancaster,
PA 17601. Proof of purchase is required and should
accompany the return.
The liability under this warranty is limited solely to the cost
of the replacement parts or the complete unit at our option.
Labor charges are not included.
This warranty is extended to the original purchaser of the
unit and excludes all other legal and/or conventional
warranties. The responsibility of HAAN® Corporation, if
any, is limited to the specific obligations expressly assumed
by it under the terms of the limited warranty. In no event
is HAAN® Corporation liable for incidental or consequential
damages of any nature whatsoever. Some states/provinces
do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights which vary
from state to state or province to province.
IMPORTANT: Before packing be sure to attach a tag to item
with your name, complete address, phone number and a
note giving purchase information, model number and what
you believe to be the problem with the item. Carefully pack
item to avoid damage in shipping. To expedite your repair, we
request that you call Customer Care to report the problem
prior to shipping your product back. We also recommend that
you insure the package (as dama ge in shipping is no t
covered by our warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE.” We are constantly
striving to improve our products; therefore, the specifications
contained herein are subject to change without notice.
Warranty Notice: FAILURE TO COMPLETE AND RETURN THE PRODUCT
REGISTRATION CARD WILL NOT DIMINISH YOUR WARRANTY RIGHTS.
www.HAANUSA.com 877-HAAN DIRECT / 877-422-6347 pg 25
pg 26 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
Date Purchased Place of Purchase
Cut along dashed line
Zip Code / Postal Code Country / Territory
Product Name / Model Number
Address
City State/Province
First Name Last Name
Please fill out and mail this Product Registration Card within ten (10) days of
purchase. In order to validate the foresaid Limited Warranty. The registration
will allow us to contact you in the unlikely event of a product safety notification.
By returning this card you acknowledge that you have read and understood
the instructions for use and the warnings set forth within the instructions.
Product Registration
Don’t miss out on all the benets that come with registration.
Go to www.HAAN USA.com /register, call or mail this completed form today.
(Fold here and tape closed before mailing)
phone
mail
2) What other HAAN
®
products have you purchased?
email
including new product releases,events and special offers. You may contact
me by:
1) Yes! I would like HAAN
®
to send me information on products and services
privacy policy. For information on this policy contact 877- HAAN Direct.
registration, thereby allowing you to receive the benefits of being a registerd
user, and for use in post-sales services. Other uses of your information are
goveerned by the choices you make in answering the questions and the HAAN
Warranty Notice: FAILURE TO COMPLETE AND RETURN THIS PRODUCT
REGISTRATION CARD WILL NOT DIMINISH YOUR WARRANTY RIGHTS.
Privacy Notice: We use this information requested on this card to process your
Product Registration
HAAN® Corporation
1866 Colonial Village Lane
Lancaster, PA 17601
Place
Stamp
Here
5) We like to hear from our customers. Please add any comments here:
4) How did you hear about HAAN
®
?
3) Where did you purchase your HAAN
®
product?
HAAN® Corporation
1866 Colonial Village Lane
Lancaster, PA 17601
www.HAANUSA.com
Loading...