Gyration GYR4101US, ULTRA R4000 User Manual

GYR4101US

ULTRA R4000

PC/TV UniVersal remoTe wiTh
air moUse and mUsiC disPlay

United States Version

Table Of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Battery Installation and Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Battery Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Gyro Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Product Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Button Cluster Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

RCU Mode Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,25

Transport Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

Menu Navigation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Gyro Activation/Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Channel/Volume Control & Media Center Green Button . . . . . . . . . . . . . . . . . . . . . . . .

11

MCE Shortcut Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Numeric Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Shortcut Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Backlighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Power/Standby Toggle Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

RF Sync, Setup & Synchronizing The Remote and The PC, Receiver Installation . . . . . . .

18

USB Features & Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Programming the Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Find Out If You Need to Program the Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20
Programming Methods

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-22

Using Automatic Code Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Using Direct Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Volume Punch Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24

Learning Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

Code Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23
Learning Commands

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24

Clearing an Individual Learned Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

Deleting All Learned Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Music Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Ultra R4000 Service Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Music Display Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-30

Remote Code List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-59

Introduction

This users’ manual describes the operation of the ULTRA R4000 PC/TV Universal Remote
Control Unit with Air Mouse and Music Display (RCU). The RCU contains an embedded micro
gyro for motion sensing and in-air control of a floating cursor. This RCU features IR code
database and IR learning capabilities to universally control standard home theater devices
such as TVs, VCRs, Digital Video Recorders (DVR), DVD players, CD players, cable/SAT boxes,
etc. This RCU links directly to your Windows Media Player Audio library. Using the Music
Display on the RCU you can browse through your audio files and listen to your music on the
PC without going to your computer.

The RCU is also equipped with a 2.4 GHz RF transceiver to send cursor movement information
and other commands to the PC via a USB transceiver. The radio frequency (RF) transceiver
delivers a range of up to 100 feet with no line-of-sight requirement. The 800 possible
channels of the RF transceiver provide high resistance to interference from other radio devices.

Battery Installation and Information

The ULTRA R4000 Motion-Sensing RCU requires four AAA Alkaline batteries. To install the batteries:

1. Remove the battery compartment cover.

2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery
compartment.

3. Replace the battery compartment cover and snap it into place.

Note: Reprogramming may be required after batteries are replaced.

Battery Saver

The RCU saves battery power by automatically going into a low-power state if no button is
pressed after a few seconds. See the Gyro section for gyro battery saver mode.

Product Registration Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it
here and record the serial number in case you need it. The serial number is located on the product.

Model Number _______________________________
Serial Number ______________________ Purchase Date _____________
Dealer/Address/Phone ________________________________________

1

Gyro Operation

The RCU provides in-air control of the PC’s
cursor via patented gyroscopic motion
sensing technology. This means mouse-like
cursor control, from anywhere in the
room, without the need of a flat surface.
There is no line-of-sight requirement
so you don’t have to point the RCU at the PC
you are controlling. Remember the
following things when using the in-air cursor
control feature of the RCU:

• Use your thumb to press the gyro and
mouse buttons.

• Click the center button to activate the
gyro motion-sensing control. Single click
and hold to move the cursor and release
it to “park” the cursor where you want it.
Double click the center button and release it
for continuous cursor movement similar to a
standard mouse.

• The right and left buttons function like
standard mouse right-click and left-click
buttons.

• Move the cursor by flexing your wrist, not
your arm or body, much as you would with
a flashlight; side to side and up and down.
Placing your arm on an armrest or on your
lap will make this motion more comfortable.

• The RF Transmit LED indicates when gyro
motion or other information is being
sent. The LED does not illuminate when
transmitting IR information.

Product Diagram

Power (standby), Music
Display Button, Display
Backlighting

RCU mode selection
and power

Transport control

Power/Standby: Places
the PC into Standby (or power
off dependant on the PC
configuration)
“Music Display Button”
Start Music display interaction
with PC
Backlight: Turns on and off the
backlight
RF Status LED is located at top
left corner (next to Gyration
company name)

Selects RCU mode

TV: IR legacy control
PC: RF communication to PC
Cable/Satellite: IR legacy

control
Auxiliary: IR legacy control

Standard AV control for selected
transport or Windows Media
Player, Windows Media Center,
DVR, etc. (Play, pause, stop, etc)
Includes IR control of legacy
devices if supported in IR
database

Button Cluster Locations

A

B

C

Button Cluster Function

2 3

A
B

C

D

E

F

G

H

I

Product Diagram (continued)

Menu navigation

Gyro button cluster

Volume and Channel
control, eHome (Vista
MCE Green Button),
Mute

Media Center shortcuts

Standard menu navigation: up,
down, left, right, OK.
Includes MS required buttons:

BACK: RF=Back, IR=Last
MORE: RF= More Info, IR=None

Includes other buttons:
INPUT: RF=none, IR=TV Input
selection
MENU: RF=DVD Menu, IR=Menu

Center button activates gyro
for in-air cursor control. Outer
buttons function like standard left
and right mouse buttons.

Standard volume up/down,
channel up/down, Vista Media
Center eHome, and volume mute.

Shortcuts buttons to easily
navigate within the Media Center
environment.

Recorded-TV, Live TV, My
Pictures, Guide

Button Cluster Locations

D

E

F

G

Button Cluster Function

4

Product Diagram (continued)

Alpha-numeric keypad

US: Hotkeys
(For US/North
American Remotes only)

Standard 0-9 keys with alpha
characters, plus *, space, #,

CLEAR, and ENTER

My Videos, Mail, Web, My
Radio, Favorites

Button Cluster Locations

H

I

Button Cluster Function

A
B

C

D

E

F

G

H

I

A
B

C

D

E

F

G

H

I

5

RCU Mode Selection

Puts RCU into TV control mode for
communicating with TV via IR protocol.

Puts RCU into PC control mode for
communicating with Media Center PC via
RF protocol.

Puts RCU into Cable / Satellite control mode
for communicating with Cable or Satellite
box via IR protocol.

Puts RCU into Aux mode for communicating
with an auxiliary device via IR protocol.

Music Display Button - Turns on Display and
puts RCU into Music control mode for playing
music stored on your PC.

Transmit LED indicator for RF transmission only

Backlight – Toggles the backlight for the
button keys. If the Display is active, the
Display backlight will turn on or off.

A

B

C

D

E

F

G

H

PC Mode:

Issues a standby command. If the system is
active, the first button pressed puts it into
standby mode. If the system is already in
standby mode, a button press will awaken.

Transport Control

Puts selected device into
Stop mode, if supported

Puts selected device into
Pause mode, if supported

Puts selected device into
Fast Forward mode, if
supported

Skip command, if
supported by selected
device

Puts selected device into
Play mode, if supported

A

B

C

D

E

Stops media playback and positions pointer to start
of media

First button press will pause the media at present
position. Subsequent button presses toggles between
pause and playback at present position pointer.

First press speeds up the time base of the media
stream to the first FF value (3X). If media is a slide
show, skips to next picture.
Subsequent button presses cycle through the FF speed
values looping through 0 (normal speed) 3X, 20X,
60X. If slide show, skips to next picture.

Skips ahead an increment:
CD and Playlists skip to next song. DVD skips to next
chapter. Slide show skips to next picture. DVR skips
29 seconds.

Start (if paused, continue) playback of media at
present position pointer. Used by Media Center for
Media Center media, DVR, CD/DVD, playlists and

slide shows.

PC Mode

D

F

6 7

B C D

E

F

A

B

C

E

H

A

PC, TV, CAB/SAT, AUX mode:
Powers on/off the selected device.

D

TV, CAB/SAT, AUX

Mode or Music Mode:

G

PC Mode

TV, CAB/SAT, AUX

Mode or Music Mode:

PC Mode

TV, CAB/SAT, AUX

Mode or Music Mode:

Transport Control

Replay command, if
supported by selected
device

Puts selected device
into Reverse mode, if
supported

Puts selected device into
Record mode, if supported

F

G

H

Move the position pointer back an increment:
CD and Playlist: skips back to previous song. DVD:
skips back to previous chapter. Slide show: skips back
to previous picture. DVR skips back 7 seconds

First press speeds up the time base and reverses
direction of the media stream to the first rewind value
(3X). Second press cycles through the reverse speed
values looping through 0 (normal speed) 3X, 20X,
60X. If media is a slide show, skips to previous picture

Records the TV show to disk. Starts recording at the
beginning of the show as defined by on-screen TV
program guide (if the pause buffer enables it)

Menu Navigation

8 9

D

F

G

H

F

A

B

C

D

E

Goes back one location of the user interface back stack

Provide information if available for the focus point

Moves the focus point up one location, if at top of the
screen takes no action

Moves focus point right one position, if at rightmost
position takes no action

Moves the focus point down one location, if at bottom of
the screen takes no action

BACK - IR: Goes
back one location (if
supported)*

MORE - IR: Provides
more information (If
supported)

Menu Navigation Up*

Menu Navigation Right*

Menu Navigation Down*

* See Music Display Navigation
Section for information on using
the Music Display

A

B

C

D

E

10

PC Mode

TV, CAB/SAT, AUX

Mode or Music mode:

Menu Navigation

F

G

H

I

Moves focus point left one position, if at leftmost position
goes back 1 page in the user interface stack

Performs action indicated by focus point

Media Center “DVD Menu”

No action

Menu Navigation Left*

Menu OK
Performs action indicated
by focus point*

Menu
IR: Setup menu

TV Input
IR: (TV Mode) Cycles
through the TV inputs.
No action in other modes

* See Music Display Navigation
Section for information on using
the Music Display

F

G

H

I

11

Gyro Activation/Select

A

B

C

Simulates a left-mouse button-click

Simulates a right-mouse button-click

Activates gyroscope for motion-sensing cursor control, motion-sensing menu
navigation, or other motion-sensing features

A

B

C

A

Channel/Volume Control & Media
Center Green Button

Goes to Windows Vista
Media Center Home
page, launches Media
Center if not running
already.

A Goes to Windows Vista Media Center Home page,

launches Media Center if not running already.

PC, TV, AUX or CAB/SAT Mode

PC Mode

Increment the current
channel by 1

Decrement the current
channel by 1

Mute selected device, if
applicable

Decrement the current
volume by 1 unit

Increment the current
volume by 1 unit

B

C

D

E

F

Increment the current channel by 1. If in a list view,
move up a page in the list.

Decrement the current channel by 1. If in a list view,
move back a page in the list.

Mute the entire PC volume, toggle mute state

Decrement the current volume by 1 unit. If muted,
un-mute the volume first.

Increment the current PC volume by 1 unit. If muted,
un-mute the volume first.

PC, TV, AUX or CAB/SAT Mode

PC Mode

MCE Shortcut Buttons

12

B

C

E

F

D

Channel/Volume Control & Media
Center Green Button

13

A - Recorded-TV

B - Live TV

C - My Pictures

D - Guide

A

B

C D

PC, TV, AUX or CAB/SAT Mode

PC Mode

No action

No action

No action

Shows the EPG (electronic
program guide) for the
particular device selected

Shortcut to the Windows Media Center
“Recorded TV” page

Brings Media Center Live TV to the front

Shortcut to the Windows Media Center
“My Pictures” page

Invokes the on-screen Media Center TV
programming guide

Shortcut Buttons

Standard 1-9, alphanumeric

Inserts a * symbol, if supported by the
selected device

Inserts a # symbol, if supported by the
selected device

Clear, if supported by the selected device

Enter, if supported by the selected device

A

B

C

D

E

Standard 1-9, alphanumeric

*

#

Clear

Enter

PC, TV, AUX or CAB/SAT mode

PC Mode

Numeric Keypad

14 15

A

B

C

D E

My Videos: Microsoft defined button - Shortcut to the Windows Media
Center “My Videos” page

Mail: Launches default email program on the PC

Web: Launches default web browser on the PC

My Radio: Microsoft defined button - Shortcut to the Windows Media Center

“My Radio”

Favorites: Displays the Web Browser “favorites” (favorite URL addresses).
Only active when the Web browser is the focus.

A

B

C

D

E

A

B

C

D

E

16 17

Connect

A

Connect: Located on the back side of
the RCU. Connects (Binds) the RCU to the
Gyration USB RF Receiver
(requires a pen-tip to activate the button
since it is below the surface)

A

The RCU Mode Selection buttons (TV, PC, CAB/SAT, and AUX) are lit when pressed;
these buttons light up whenever they are pressed (for 2-3 seconds) to indicate which Control
Mode the remote is in.

There is no automatic backlighting on any of the RCU buttons. The “Backlight” button
controls the backlight of the RCU buttons and the Display. Upon pressing the “Backlight”
button, the main RCU keys will be backlit. If the Display is active (by pressing the Display
button), the Display will also become backlit.

The backlight acts as a toggle and can also be used to turn off all backlighting. Additionally,
the backlighting will timeout after a short amount of time (timeout occurs after last button
pressed and the backlight turns off if no other button is pressed within 10 seconds).

If the backlighting seems dim, the batteries may need to be replaced.

Power / Standby Toggle Button

This button turns the selected device on or off or toggles its power state from standby to
active. The device is selected with the RCU Mode Switches; PC, TV, CAB/SAT, and AUX.

In PC mode, this button issues a standard Windows STANDBY command. Various options
for this command can be set up in Windows. Go to Start/Control Panel/Power Options/
Advanced and then set a function for the STANDBY command. In the default configuration,
if the PC is already on, the first button press puts the PC into standby mode. If the PC is in
standby mode, another press of this button will wake up the PC.

Backlighting

Music Display Upon Unsuccessful

Connection, See Troubleshooting

Section For More Information

Music Display While

Connecting

Music Display Upon

Successful Connection

18 19

RF Receiver & Synchronization

Communication between the RCU and the PC is done via an RF transceiver which is plugged
into a standard USB port in the PC. In order for this to work, you need to synchronize, or
“bind” your remote and PC. See below for the binding procedure.

Setting Up & Synchronizing The
Remote & The PC

After inserting the batteries in the remote control unit,

1. Hold the remote in close proximity to the PC.

2. Press the CONNECT button on the RF Dongle transceiver which is plugged into

the PC USB port.

3. Press the CONNECT button on the underside of the RCU.

4. The Display screen on the RCU will indicate a successful connection.

5. If a successful connection is not made, repeat steps 1 - 3

Receiver Installation

The RCU requires a USB RF transceiver be plugged into a USB port in the PC in order to
access RF and gyro functions. The USB extension cable can be used to maximize the range
of the RCU by placing the USB RF transceiver away from other electrical components. A
USB RF transceiver does not need to be plugged in to use the IR remote functions. See the
diagram below.

USB Features

• Connects to PC via standard USB 2.0 connection

• PC operating systems supported: Windows Vista, Windows XP MCE, and Windows XP

• LED to indicate bind sequence and radio activity

• Connect button, pen-push type

USB Compatibility

The transceiver uses a standard USB Type A connector for connection to any standard USB
port of a computer. The transceiver is a certified USB compatible 2.0 device, running at low
speed. It is certified to run on Windows Vista, Windows XP MCE, and Windows XP.

This transceiver is compatible with the following Gyration products:
Ultra R4000 (The Music Service and Music Display functions of this remote require use of
the included Ultra 4000 RF Receiver to fully function)
Gyration Go Mouse
Gyration Go Mobile keyboard
Gyration Go Full size keyboard
Gyration Media Center Universal Remote Control
Gyration GyroTransport

Transceiver Compatibility
Matrix with Gyration Products

Programming Methods (continued)

20 21

Programming the Remote

The RCU can be programmed to operate many brands of IR controllable devices via the
IR functions of the RCU. Devices include TVs, DVD Players, Cable/Satellite Boxes, etc.
Please see the Remote Code List for all devices supported.

Find Out If You Need to Progam the Remote

To determine whether the remote needs to be programmed to operate your device, do the
following (using the TV as an example)

1. Turn on the TV.

2. Point the remote at the TV.

3. Press the TV button.

4. Press the ON/OFF button to see if the TV responds. If the TV doesn’t respond, you must

program the remote to operate it.

Programming Methods

There are two ways to program the remote control to operate other components: Automatic
Code Search and Direct Entry.

Using Automatic Code Search

The following instructions can be used to program the RCU to operate each of your
components. If you want to stop the automatic code search without programming any of
your components, press and hold CLEAR (*) until the indicator on the RCU turns off.

1. Turn on the device you want to operate (TV, DVD player, etc.)

2. Press and hold the device button you want to program (TV, AUX, etc.). While holding

the device button, press and hold ON/OFF button until the device button on the RCU
turns on, then release both buttons.

3. Point the remote at the device.

4. Press and release PLAY, then wait 5 seconds or until the device button stops flashing.

At this point the RCU is searching for the correct code to program. If, after 5 seconds, the
device you want to operate does not turn off, press PLAY again to tell the RCU to search
the next set of codes. Continue pressing and releasing PLAY until the device turns off
or you have searched through all of the codes. The device buttons flash when all codes
have been searched, the device button turns off, and the RCU exits the Automatic Code
Search mode.

If the component you want to control

does turn off:

1. Press and release REVERSE, then wait 2 seconds. Repeat this step until the component
turns back on.

2. To finish, press and hold STOP until the component button on the RCU turns off. The RCU
will automatically exit the Automatic Code Search mode.

Using Direct Entry

1. Turn on the device you want to operate (TV, DVD player, etc.)

2. Look up the brand and code number(s) for the device in the Remote Code List at the end
of this booklet.

3. Press and hold the device button you want to program ((TV, AUX, etc.) on the RCU.

4. Enter the 4-digit code from the Remote Code List. If all the mode buttons flash, you
have either entered an invalid code or the button isn’t programmable.

5. Release the device button, point the RCU at the device, and then press the ON/OFF
button to see if the device responds to the command. If it doesn’t, try pressing the device
button and then ON/OFF again.

• If you get no response, repeat these steps using the next code listed for

your brand, until the device responds to the remote commands.

• If you try all the codes for your device brand and none work, try the

automatic code search method. If automatic code search doesn’t find the
code, the remote is not compatible with your component.

Because the RCU controls more than one device, you must first “tell” it which device you
wish to operate. For example, if you wish to operate the TV, you must first press the TV
mode button on the RCU to put it in the TV mode.

The RCU stays in the chosen mode until you change it. If the RCU is in the TV mode, you
must change the mode in order to operate other components. For example, if you are in
the TV mode and you wish to turn off the Cable Box, you must first press the CAB/SAT
button then the On/Off button. Return to the TV mode by pressing the TV mode button.

Programming Methods (continued)

22 23

The RCU has the ability to learn the commands of other remote control
units, such as TV remotes or VCR remotes. This allows the most-used
commands on those remotes to be combined on the RCU. These original
remote control units are also known as source remotes. Learning is not
active in the PC mode.

Learning Tips

1. All learned functions for a mode can be erased if you program a different
device to that mode.

2. Perform the learning process in low-light areas because too much
ambient light might cause interference with the infrared (IR) signals
of the remotes.

3. Use fresh batteries in both the Media Center and

PC RCU and the original remote.

Code Learning

Codes from the Remote Code List include basic functionality
for each component they control. Once you have programmed
in the code for your specific component (using either the Automatic
Code Search or Direct Entry method), you can customize the RCU to
perform certain functions from your original remote(s) that were not
embedded in the preset code. The RCU has the ability to learn and
store commands from your original remote(s) under the mode(s)
of your choice.

Learning Commands

For the following section, the TV remote control unit will be used as an
example. Learning from other types of remotes will be done in a
similar way.

1) First press and hold the mode button on the RCU for the component
remote you are learning from (the TV button on the RCU, for
example) then press and hold the RECORD button on the RCU.

2) Keep pressing both buttons until the device mode button light turns
off, flashes, and turns off. Release both buttons.

Learning

Volume Punch Through

The Volume Punch Through feature allows you to control the volume without exiting the
current mode. When Punch Through is enabled, the VOL+, VOL-, and MUTE keys will
always control the Punch Through device. By default the TV is the Volume Punch Through
device. To disable Volume Punch Through, see the “Disabling Volume Punch Through”
Section below.
Note: Volume Punch Through only applies to the three IR Mode Device Buttons (TV,
CAB/SAT, AND AUX).

Note: The remote must be programmed via Automatic Code Search or Direct Entry
before enabling Volume Punch Through.

To change the Volume Punch Through device or enable Volume Punch Through:

1. Press and hold the device button of the device you want to Punch Through
(TV, AUX, etc.) on the RCU.

2. Press and hold the VOL- button until the device button on the RCU turns on,
then release both buttons.

Volume Punch Through is now enabled for the selected device.

Disabling Volume Punch Through

To disable Volume Punch Through:

1. Press and hold the VOL- button (the device button of the Volume Punch Through lights).

2. While holding the VOL- button, enter the code, 0000, using the number buttons. All
device buttons turn on for 2 seconds and then turn off.

Note: If an invalid button is pressed, all device buttons blink 4 times and turn off. At this
point, you must start over.

Once Volume Punch Through is disabled, the VOL+, VOL-, and MUTE keys will control
the device currently selected by the Device button (PC, TV, CAB/SAT, or AUX). To
enable Volume Punch Through, see the “Volume Punch Through” Section above.

Remotes should

not be

more than

2” apart

Ultra R4000 Service Application

24 25

To delete all learned functions at one time, use the procedure below.

1. Press and hold the CLEAR button (the current component button lights). Then press and
hold the ON/OFF button (component button light turns off for 3 seconds, flashes, turns
on and off) while continuing to hold the CLEAR button.

2. Release both buttons (current component button turns on).

3. Press any component button to delete all learned functions in all modes. The RCU
automatically exits this clearing mode.

Note: Pressing the CLEAR button while in this mode will not delete the learning functions,

but it will exit this delete mode.

Music Mode

Music mode is a revolutionary new way for you to search through and play your favorite
songs that you have already setup on your Windows PC. It links directly to your
Windows Media Player Audio library so that you can browse through your audio files and
listen to your music without going to your computer.

Note: This mode of the RCU is intended for use on the Windows operating system using
the Windows Media Player application (version 10 or higher). Operation on other operating
systems has not been verified.

Ultra R4000 Service Application

The RCU comes with a software application that runs in the background (as a “service”)
on the computer (PC) and interfaces to the Windows Media Player music database. The
application communicates the music database information to the RF transceiver attached
to the computer. The information is then transmitted via RF to the RCU and displayed on the
display. The Ultra R4000 Software Service Application or “Music Software service”
is required for operation of the Music display. This Software service is provided via an
installation CD.

This application can be enabled/disabled manually by the user. The application is set
to “enabled” by default (upon system boot). Disabling the service has no effect on normal
RCU operation (TV, PC, CAB/SAT, and AUX modes), but will make the display inoperable.

3) On the RCU, press and release the button where you want to store the new function (the
component button turns off and then back on; a short flash).

Note: If you press an invalid button on the remote, the device mode button flashes 4 times
to alert you. You’ll have to repeat step 3.

4) Position the source remote facing the bottom of the RCU no more than 2 inches apart.
Press and hold the button of the source remote that has the functionality you are
recording. Keep pressing the button until the RCU device mode button light turns off and
back on (the source function has been saved to the TV mode on the RCU).

Note: If all device mode buttons flash 4 times, the function wasn’t learned. Try again
starting with Step 3.

5) The RCU remains in the “learning mode” so you can continue adding functions to
different buttons by repeating steps 3 and 4.

6) Press CLEAR to exit the learning mode.

Clearing an Individual Learned Function

To delete a learned button function, use the procedure below.

1. Press and hold the component mode button (the component button lights). Then press
and hold the CLEAR button for 3 seconds. Hold both buttons depressed until the
component mode button flashes.

2. Release both buttons. The component mode button turns on indicating that the RCU is
now in the Clear Learned Function mode for that component.

3. Press and release the button where learning is to be cleared. The component mode
button blinks off then back on indicating that the function was cleared successfully.

4. Repeat Steps 1 through 3 until all the buttons’ learned functions have been cleared.

Note: If an invalid button is pressed, the component mode button flashes 4 times, the

selected component button stays on, and the RCU remains in Clear Learned Function
mode. Repeat Step 3 to continue the clearing process.

5. Press the CLEAR button to return the RCU to normal operation.

Learning (continued) Deleting All Learned Functions

Music Display Navigation

Adjusting the Contrast on the Display

To adjust the contrast on the Display, perform the following steps:

1. With the Display screen active, press and hold the button located beneath the Display screen.

2. Continue to hold the button after the Display screen turns off for 5 more seconds.

3. The Display Contrast adjustment screen will appear.

4. Use the menu navigation up and down arrows to adjust to the desired appearance.

5. Press any button to exit.

6. If no button is pressed, the display will time out in about 5 seconds.

Note: The contrast settings range from 0 (lightest) to 21 (darkest).
Note: The contrast value is stored, even when removing the batteries.

Reinstalling the Ultra R4000 Installation Software

To reinstall the Ultra R4000 Installation Software service application, perform the
following steps:

1. With Windows® running on your computer, insert the CD into your CD/DVD-ROM drive.

2. If the CD window does not open automatically, double-click the My Computer icon on
your desktop, and then double-click the CD/DVD-ROM drive containing the CD.

3. Locate the install package provided on the CD for your Ultra R4000 Motion-Sensing
Remote Control.

4. Follow the instructions provided by the CD to extract and install the application.

26 27

When you press the Music Display button ( button) the Display powers up and displays
the top level menu structure. (If service application is running and within range, see the
Troubleshooting section for more details).

To move up and down the screen, use the UP and DOWN arrow keys.

To enter a menu level, use either the right (or OK) button. To back out of a level, use the
left (or Back) button. You can play the whole album by pressing the Play button at this
level, or enter the album and select a specific song.
Note: As you navigate through the menu the heading changes on the top line.

While a song is playing, the MP3 Tag information (called Metadata) will be shown on the
display along with a progress bar, the current running time and the time left for that song.

Troubleshooting

Troubleshooting Troubleshooting

28 29

Common Problems and Solutions

Problem Cause Solution

Cursor Control Issues

The Display screen does not
match or show the updates
to the Windows Media Player
audio library.

The Menu Navigation buttons
are non-responsive while the
Display screen is active.

The cursor does not move
when the “Motion by
Gyration” button is pressed.

The Display Software Service
Application did not update
correctly.

The Display screens needs to
be manually refreshed.

The Display screens needs to
be manually refreshed.

The Display Software Service
Application has lost contact
with the remote control.

The remote control is out of
range with the computer.

The remote control and
computer are not connected.

The batteries are low.

Restart the Display Software
Service Application, by
clicking the Ultra R4000

Motion-Sensing Remote

Control

(green) icon on the Windows
Taskbar, and clicking “Restart.”

Press the

button to return

to the Main Menu.

Use the menu navigation
buttons to move up or down
from the current level in the
Display screen.

Refresh the Display screen by
pressing the

button for
three seconds to shut off the
Display screen, then pressing
the

button again to turn

the Display screen back on.

Place the remote control closer
to the computer.

Connect the Ultra R4000
Motion-Sensing Remote

Control

with your computer.

Replace the batteries.

Common Problems and Solutions

Problem Cause Solution

Cursor Control Issues

The cursor movement is
choppy or erratic.

The cursor moves too fast or
too slow.

The cursor drifts on the
screen.

The Power/Standby button
does not wake the computer
out of Standby mode.

The Power/Standby button
does not wake the computer
out of Standby mode.

There may be radio
interference near the
computer.

The speed or acceleration is
not set properly.

The remote control sensor
may require self-recalibration.

If the BIOS setting for Wake
from USB is disabled, the
system will not turn back on
via the remote control.

If the computer is placed into
Hibernation or Shutdown
mode, and then the AC power
is removed, the internal
receiver loses its power and
cannot wake the system (even
if AC power is reapplied).

If the BIOS setting for Wake
from USB is disabled, the
system will not turn back on
via the remote control.

Move any electronic devices
away from PC
(i.e., speakers, radio, etc.).

Change the cursor tracking
speed under the Mouse settings
in the Control Panel.

Place the remote control on
a flat surface for 5 or more
seconds. The gyroscope will
perform a self-steady routine
to identify and eliminate drift.

Enable the wake from USB
option in the system BIOS. For
information on accessing the
system BIOS, see your Owner’s
Manual.

Turn on the computer manually
using the system Power button.

Enable the wake from USB
option in the system BIOS. For
information on accessing the
system BIOS, see your Owner’s
Manual.

Troubleshooting

Common Problems and Solutions

Problem Cause Solution

Cursor Control Issues

The text “NO LINK” is
displayed on the Display
screen.

The text “NO SERVICE” is
displayed on the Display
screen.

The text on the

Display Screen

is in English (if applicable).

The remote control and
computer are not connected.

There may be radio
interference near the
computer.

The remote control is out of
range with the computer.

The Display Software Service
Application is not enabled

.

All text in the remote control
Display screens will be in
English until a successful
connection to the computer
has been made.

Connect the Ultra R4000
Remote with your computer.

Move any electronic devices
away from PC
(i.e., speakers, radio, etc.).

Place the remote control closer
to the computer.

To re-enable the Display Software
Service Application, click the Ultra
R4000 Remote Control (red)
icon on the Windows Taskbar and
click “Start.”

Connect the Ultra R4000
Motion-Sensing Remote with
your computer.

TV
Brand

Code

Digital TV

Zenith 1261

HDTV

Apex 1278
Daewoo 1284
JVC 1254 1422
Mitsubishi 1268 1271
Panasonic 1272 1283 1476
Philips 1274 1275 1276 1279
Samsung 1330
Sharp 1285
Sony 1201 1274 1421 1468 1472
Thomson 1419
Toshiba 1420
Zenith 1286 1287

HDTV Monitor

Brillian 1469
Panasonic 1470
Sears 1469
Zenith 1261

HDTV Projection Monitor

Panasonic 1257 1273 1471
Pioneer 1280

HDTV Projection TV

Sony 1274

HT Projector

Sony 1262 1265

LCD HDTV

Samsung 1362
Zenith 1281

LCD TV

Benq 1228

Remote Code List

3130

Remote Code List

TV
Brand

Code

LCD TV

ESA 1220
NET-TV 1230
Panasonic 1205 1206
Philips 1207 1219
Polaroid 1209 1216 1217
RCA 1346
Samsung 1202 1204 1212 1213
Sharp 1200
Sony 1201
Sylvania 1220
Toshiba 1203 1211
Viewsonic 1208 1210 1214 1221 1222 1223 1224
1225 1226 1227

LCD TV/PC Monitor

Sampo 1473

LCD TV/Tuner Combo

Polaroid 1209

Plasma Display

Acer 1239
Pioneer 1244
Samsung 1202 1231 1245
Toshiba 1236 1237
Viewsonic 1246

Plasma TV

Gateway 1240
Magnavox 1474 1475
Viewsonic 1238

Plasma TV Monitor

Fujitsu 1232 1233 1234 1235
Hitachi 1241 1478
NEC 1242

32

Remote Code List

TV
Brand

Code

Plasma TV Monitor

Panasonic 1243
Pioneer 1277
Samsung 1270
Sony 1477
Zenith 1247

Projection HDTV

Sharp 1264 1282

Projection Monitor

Pioneer 1258

Projection TV

Hitachi 1251 1256 1259 1260
JVC 1254 1255
Mitsubishi 1248
Panasonic 1257 1329 1334
Samsung 1252 1270 1480
Sharp 1270
Sony 1201 1263
Toshiba 1249 1253 1479
Zenith 1266

TV

Abex 1147
Admiral 1004 1148
Advent 1410
Adventura 1149
Aiko 1018
Aiwa 1425 1435
Akai 1005
Alleron 1045
Amtron 1039
Anam National 1006 1039 1163 1164 1165
AOC 1007 1008 1009 1010 1150 1151 1166

33

Remote Code List

TV
Brand

Code

TV

Apex 1296 1341 1423 1426
Audiovox 1039
Belcor 1007
Bell & Howell 1004 1047 1068
Benq 1427
Bradford 1039
Brockwood 1007
Broksonic 1203 1250
Candle 1007 1009 1011 1149
Carver 1418
Celebrity 1005
Centurion 1012
Citizen 1007 1009 1011 1018 1039 1068 1095 1146 1173
Colortyme 1007 1009 1013
Concerto 1007 1009
Contec/Cony 1014 1015 1016 1039
Craig 1039
Crosley 1418
Crown 1039 1058
CTX 1336
Curtis Mathes 1003 1007 1009 1017 1047 1068 1095 1146 1173
1180 1185 1187 1188 1418
CXC 1039
Daewoo 1007 1008 1009 1018 1019 1020 1112 1146 1161
1290 1332 1428 1429
Daytron 1007 1009 1146
Dell 1001 1002
Dimensia 1003 1187 1188
Dumont 1007 1131
Durabrand 1327
Electroband 1005

34

Remote Code List

TV
Brand

Code

TV

Electrograph 1412
Electrohome 1005 1006 1007 1009 1021 1022 1023
Emerson 1007 1009 1014 1024 1025 1026 1027 1028 1029
1030 1031 1032 1033 1034 1035 1036 1037 1038
1039 1040 1041 1042 1043 1044 1045 1047 1068
1110 1146 1152 1153 1162 1181 1189 1197 1415
1416 1417 1429
Envision 1007 1009
Epson 1409
Fisher 1046 1047 1048 1068 1154 1337
Fujitsu 1045
Funai 1039 1045
Futuretech 1039
Gateway 1412
GE 1003 1006 1007 1009 1023 1049 1050 1051 1078
1141 1142 1143 1155 1174 1187 1188 1191 1296
1317 1430
Gibralter 1007 1053 1131
Goldstar 1007 1008 1009 1014 1021 1052 1053 1054 1135
1136 1146 1147
Grunpy 1039 1045
Hallmark 1007 1009
Harvard 1039
Hitachi 1007 1009 1014 1015 1016 1055 1056 1057 1118
1119 1120 1121 1122 1123 1124 1125 1126 1127
1128 1129 1130 1153 1167 1179 1182 1193 1194
1195 1196 1197 1256 1269 1292 1359 1363 1365
1370 1401 1424 1431
IMA 1039
Infinity 1058 1418
Janeil 1149

35

Remote Code List

TV
Brand

Code

TV

JBL 1058 1418
JC Penney 1003 1007 1008 1009 1011 1015 1023 1049 1050
1053 1054 1066 1067 1078 1094 1095 1113 1146
1147 1155 1187 1188 1191
JCB 1005
Jensen 1007 1009 1218 1407 1408 1432
JVC 1014 1015 1016 1050 1056 1059 1060 1061 1137
1138 1156 1181 1199 1254 1293 1324 1345 1352
1369 1378 1393 1397 1400 1433 1434
Kawasho 1005 1007 1009
Kenwood 1007 1009 1021
Kloss Novabeam 1039 1062 1063 1149
Konka 1413 1414
KTV 1039 1064 1146 1152
LG 1008
Loewe 1058
Logik 1004
Luxman 1007 1009
LXI 1003 1009 1047 1058 1065 1066 1067 1068 1155
1171 1187 1188 1191 1418
Maganvox 1300 1399 1437
Magnavox 1007 1009 1011 1021 1058 1062 1063 1069 1070
1071 1079 1115 1116 1117 1186 1198 1301 1302
1418 1436 1437 1438 1439
Majestic 1004
Marantz 1007 1009 1055 1058 1072 1418
Maxent 1412
Megatron 1009 1055
Memorex 1004 1008 1009 1047 1068 1440 1441
MGA 1007 1008 1009 1021 1023 1048 1073 1074
Midland 1050 1051 1131 1146 1147 1155 1191

36

Remote Code List

TV
Brand

Code

TV

Minutz 1049
Mitsubishi 1007 1008 1009 1021 1023 1048 1073 1074 1075
1111 1319 1328 1358
Montgomery Ward

1004
Motorola 1006 1148
MTC 1007 1008 1009 1095
Multitech 1039
Multivision 1076
NAD 1009 1065 1066 1067 1157 1179
NEC 1006 1007 1008 1009 1013
NetTV 1412
Nikko 1009 1018
Norcent 1215 1406
NTC 1018
Onwa 1039
Optimus 1157 1179
Optonica 1086 1148
Orion 1036 1162 1327
Panasonic 1006 1050 1058 1145 1175 1184 1294 1312 1314
1334 1335 1344 1350 1351 1367 1377 1380 1382
1384 1385 1386 1404 1442 1454
Philco 1006 1007 1008 1009 1011 1014 1021 1058 1062
1063 1069 1071 1418 1441
Philips 1006 1007 1011 1014 1021 1058 1062 1063 1069
1077 1078 1079 1080 1229 1295 1299 1301 1302
1316 1325 1355 1356 1357 1360 1361 1364 1368
1373 1374 1375 1376 1379 1395 1418 1443 1444
1445 1446 1447 1450 1451 1452 1453
Philips 1295 1300 1301 1316 1437 1438 1445 1446 1447
Magnavox 1448 1449 1450 1451 1452 1453
Pilot 1007 1146

37

Remote Code

List

TV
Brand

Code

TV

Pioneer 1007 1009 1081 1082 1083 1153 1157 1179 1197
1372
Portland 1007 1008 1009 1018 1146
Price Club 1095
Prima 1467
Prism 1050
Proscan 1003 1155 1187 1188 1191
Proton 1007 1009 1014 1084
Pulsar 1007 1131
Quasar 1006 1050 1064 1085 1175 1294 1394 1454 1455
Radio Shack 1047 1068 1187 1188
Radio Shack/ 1003 1007 1009 1014 1039 1047 1068 1086 1146
Realistic 1147
RCA 1000 1003 1006 1007 1008 1009 1010 1021 1087
1088 1089 1090 1091 1092 1093 1114 1153 1155
1158 1159 1161 1168 1176 1180 1183 1185 1187
1188 1190 1191 1197 1289 1298 1303 1310 1317
1326 1332 1333 1342 1371 1390 1391 1392
Realistic 1047 1068 1187 1188
Runco 1131
Sampo 1007 1009 1146 1147 1338 1412
Samsung 1007 1008 1009 1014 1017 1021 1094 1095 1096
1146 1147 1169 1192 1252 1270 1308 1326 1330
1331 1353 1362 1366 1387
Sansui 1162 1327 1348
Sanyo 1007 1046 1047 1068 1074 1097 1098 1144 1154
Scotch 1009
Scott 1007 1009 1014 1025 1036 1039 1045
Sears 1003 1007 1009 1015 1016 1021 1045 1046 1047
1048 1060 1065 1066 1067 1068 1099 1100 1154
1155 1160 1187 1188 1191 1418

38

VCR Code

Remote Code

List

Tuner Code

TV
Brand

Code

TV

Sharp 1007 1009 1014 1027 1030 1086 1101 1102 1103
1109 1146 1148 1318 1323 1391 1398 1402 1456
Shogun 1007
Signature 1004 1104
Simpson 1011
Sony 1005 1170 1177 1178 1201 1263 1304 1306 1315
1457 1458 1459 1460
Soundesign 1007 1009 1011 1039 1045
Squareview 1160
SSS 1007 1039
Starlite 1039
Supre-Macy 1149
Supreme 1005
Sylvania 1007 1009 1011 1021 1058 1062 1063 1069 1070
1071 1079 1105 1140 1220 1311 1343 1347 1381
1383 1418 1447 1461 1462
Symphonic 1034 1039 1160 1220 1463
Tandy 1148
Tatung 1006
Technics 1050
Techwood 1007 1009 1050
Teknika 1004 1007 1008 1009 1011 1014 1015 1016 1018
1039 1045 1070 1095 1145 1146 1175 1184 1418
Telecaption 1106
TMK 1007 1009
Toshiba 1047 1065 1066 1067 1068 1095 1099 1106 1107
1139 1140 1249 1253 1297 1305 1307 1309 1313
1321 1322 1339 1340 1349 1388 1396 1405 1411
1464 1465 1466
Totevision 1146
Universal 1049 1078

39

Remote Code

List

TV
Brand

Code

TV

Victor 1060 1156
Vidikron 1418
Vidtech 1007 1008 1009
Viewsonic 1412
Viking 1149
Wards 1003 1004 1007 1008 1009 1021 1025 1034 1045
1049 1058 1062 1063 1069 1070 1078 1079 1086
1108 1187 1188 1418
White Westinghouse

1429
Yamaha 1007 1008 1009 1021
Zenith 1004 1007 1131 1132 1133 1134 1172 1251 1261
1286 1288 1291 1320 1354 1389 1403

TV/DVD Combo

Apex 1341
Broksonic 1203
JVC 1345 1378
Panasonic 1377
Philips 1229 1376 1379
RCA 1342 1346
Sansui 1348
Sylvania 1343
Toshiba 1203 1339 1340

TV/DVD/Tuner Combo

Panasonic 1344

TV/DVD/VCR Combo

Panasonic 1382
RCA 1333
Samsung 1331
Sylvania 1347 1381 1383
Toshiba 1349

40

Remote Code

List

TV
Brand

Code

TV

Code

DVD

Code

Tuner

Code

TV-DVD
Brand

41

TV/DVD/VCR Tuner Combo

Panasonic 1350 1380

TV/VCR Combo

Broksonic 1250
Daewoo 1290
Emerson 1415
GE 1317
Hitachi 1269 1401
JVC 1254 1293 1393 1397 1400
Maganvox 1399
Magnavox 1302
Panasonic 1384 1404
Philips 1302
Quasar 1294 1394
RCA 1298 1310 1326 1390 1391 1392
Samsung 1326 1387
Sharp 1323 1391 1398 1402
Sylvania 1311
Toshiba 1297 1322 1388 1396 1405
Zenith 1291 1389 1403

TV/VCR/Tuner Combo

Panasonic 1294 1314 1385 1386
Philips 1395

TV-DVR

Panasonic 1267

TV/DVD Combo

Apex 1341 3151
Broksonic 1203 3160
JVC 1345 3156
1378 3185

Remote Code

List

TV

Code

DVD

Code

Tuner

Code

TV-DVD
Brand

TV

Code

DVD

Code

Tuner

Code

TV-VCR-TuneR
Brand

TV/DVD Combo

Panasonic 1377 3184
Philips 1229 3147
1376 3158
1379 3186
RCA 1342 3152
1346 3157
Sansui 1348 3160
Sylvania 1343 3153
Toshiba 1203 3149
1339 3150
1340 3155

TV/DVD Tuner Combo

Panasonic 1344 3154 4124

TV/VCR Combo

Broksonic 1250 2095
Daewoo 1290 2096
GE 1317 2024
Hitachi 1269 2085
1401 2097
JVC 1254 2077
1422 2072
1293 2013
1393 2075
1397 2080
1400 2083
Magnavox 1302 2020
1399 2082
Panasonic 1384 2067
1404 2089

42

Remote Code

List

TV

Code

DVD

Code

Tuner

Code

TV-VCR-TuneR
Brand

TV/VCR Combo

Philips 1302 2018
1302 2020
Quasar 1294 2014
1394 2076
RCA 1298 2017
1310 2017
1326 2060
1390 2098
1391 2073
1392 2074
1387 2069
Samsung 1326 2060
1387 2069
Sharp 1323 2061
1391 2073
1398 2081
1402 2087
Sylvania 1311 2021
Toshiba 1297 2016
1322 2025
1388 2070
1396 2079
1396 2084
1405 2090
Zenith 1291 2012
1389 2071
1389 2086
1403 2088

43

Remote Code

List

TV

Code

DVD

Code

Tuner

Code

TV-VCR-TuneR
Brand

44

TV/VCR Tuner Combo

Panasonic 1294 2014 4125
1294 2068 4123
1294 2023 4121
1294 2019 4123
1314 2022 4122
1385 2019 4150
1386 2014 4151
1314 2022 4182
Philips 1395 2078 4152

TV/DVD/VCR Combo

Panasonic 1382 3188 2092
RCA 1333 3165 2102
Samsung 1331 3166 2103
Sylvania 1347 3163 2101
1381 3187 2091
1383 3189 2093
Toshiba 1349 3161 2105
1349 3161 2106

TV/DVD/VCR Tuner Combo

Panasonic 1350 3162 2107 4126
1380 3239 2108 4153

Satellite DVR

DISH Network 5022
Hughes 5029
Philips 5021 5029
RCA 5017 5029

TV

Code

DVD

Code

Tuner

Code

TV-DVD-VCR
TuneR

Brand

SATeLLITe

Brand

Code

VCR

Code

Remote Code

List

SATeLLITe

Brand

Code

CAbLe

Brand

Code

Satellite DVR

Samsung 5029
Sony 5016 5020
Zenith 5018

Satellite

DIRECTV 5015
Express Vu 5004
GE 5001 5002 5019
Hughes 5007
JVC 5003
Mitsubishi 5007
Panasonic 5008 5011
Philips 5014
Pioneer 5027
Proscan 5001 5002
RCA 5000 5001 5002 5024 5025 5028
Samsung 5010 5026
Sony 5009 5023
Star Choice 5005
Toshiba 5012
Zenith 5013

HDTV Tuner

Panasonic 5029
RCA 5006

DTV Decoder

Sharp 5006

Cable Box

ABC 5036
Adelphia 5042
Cable Vision 5043

45

Remote Code

List

VCR

Brand

Code

CAbLe

Brand

Code

Cable Box

Comcast 5041 5044 5045
Contec 5035
COX 5031
GE 5036
Gemini 5034
General Instruments 5033 5036 5044
Hamlin 5032
Hitachi 5036
Jerrold 5033 5036
Motorola 5040 5045 5031
Philips 5034
Proscan 5036
RCA 5033
Rembrandt 5036
Scientific Atlanta 5037 5038 5042
Signature 5036
Sony 5043
Time Warner 5030
View Star 5035

Cable

Comcast 5039

Cable-DVR

Motorola 5041

DVD/VCR Combo

Broksonic 2034
Daewoo 2054
Emerson 2099
Go Video 2047 2048 2055 2056
Hitachi 2049 2052

46

Remote Code

List

VCR

Brand

Code

DVD/VCR Combo

JVC 2031 2039 2040
Magnavox 2053
Panasonic 2035 2057
Philips 2038
Polaroid 2059
RCA 2030 2051
Samsung 2029 2032 2033 2044 2050
Sanyo 2100
Sharp 2042 2058
Sony 2028 2043
Toshiba 2036 2037 2041
Zenith 2045 2046

TV/DVD/VCR Combo

Panasonic 2092
RCA 2102
Samsung 2103
Sharp 2104
Sylvania 2091 2093 2101
Toshiba 2105 2106

TV/DVD/VCR/Tuner Combo

Panasonic 2107 2108

TV/VCR Combo

Aiwa 2094
Broksonic 2095
Daewoo 2096
GE 2024
Hitachi 2085 2097
JVC 2013 2072 2075 2077 2080 2083
Maganvox 2082
Magnavox 2020
Panasonic 2067 2089

47

Remote Code

List

VCR

Brand

Code

TV/VCR Combo

Philips 2018 2020
Quasar 2014 2076
RCA 2017 2069 2073 2074 2098
Samsung 2060 2069
Sharp 2061 2073 2081 2087
Sylvania 2021
Toshiba 2016 2025 2070 2079 2084 2090
Zenith 2012 2071 2086 2088

TV/VCR/Tuner Combo

Panasonic 2014 2019 2022 2023 2068
Philips 2078

VCR

Aiwa 2094
Broksonic 2034 2095
Daewoo 2054 2096
Emerson 2099
GE 2024
Go Video 2047 2048 2055 2056 2065
Hitachi 2002 2010 2049 2052 2063 2064 2085 2097
JVC 2013 2031 2039 2040 2072 2075 2077 2080
2083
Maganvox 2082
Magnavox 2001 2020 2026 2053
Memorex 2027
Mitsubishi 2066
Panasonic 2014 2019 2022 2023 2035 2057 2067 2068
2089 2092 2107 2108
Philips 2009 2018 2020 2038 2078
Philips Magnavox 2015
Polaroid 2059
Quasar 2003 2005 2014 2076

48

Remote Code

List

VCR

Brand

Code

VCR

RCA 2000 2004 2017 2030 2051 2069 2073 2074
2098 2102
Samsung 2029 2032 2033 2044 2050 2060 2069 2103
Sanyo 2100
Sharp 2042 2058 2061 2073 2081 2087 2104
Sony 2007 2008 2028 2043
Sylvania 2021 2091 2093 2101
Toshiba 2006 2011 2016 2025 2036 2037 2041 2062
2070 2079 2084 2090 2105 2106
Zenith 2012 2045 2046 2071 2086 2088

DVD/VCR Combo

Broksonic 2034 3127
Daewoo 2054 3142
Emerson 2099 3147
Go Video 2047 3139
2048 3138
2055 3143

DVD/VCR Combo 2056 3144

Hitachi 2049 3140
2052 3140
JVC 2031 3124
2039 3132
2040 3133
Magnavox 2053 3131
Panasonic 2035 3128
2057 3145
Philips 2038 3131
Polaroid 2059 3146

DVD

Code

VCR

Code

DVD-VCR

Brand

49

Remote Code

List

DVD

Code

VCR

Code

DVD-VCR

Brand

Code

DVD

Brand

DVD/VCR Combo

RCA 2030 3123
2051 3136
Samsung 2029 3122
2032 3125
2033 3126
2044 3137
2050 3141
Sanyo 2100 3148
Sharp 2042 3134
2058 3134
2104 3164
Sony 2028 3121
2043 3135
Toshiba 2036 3129
2037 3140
2041 3043
Zenith 2045 3138
2046 3138

DVD

Aiwa 3002
Apex 3008 3009 3010 3046 3071 3151
BOSE 3011 3159
Broksonic 3127 3160
Clarion 3012
Classic 3013
Daewoo 3075 3142
Denon 3050 3094 3100 3179 3208 3214 3217 3226
3231
Emerson 3014 3015 3147

50

Remote Code

List

DVD

Brand

Code

DVD

Fisher 3016
Funai 3015
GE 3017 3067
Go Video 3138 3139 3143 3144
GPX 3018
Harman/Kardon 3106
Hitachi 3019 3034 3140 3215 3229
JBL 3070
JVC 3056 3064 3076 3079 3083 3103 3104 3124
3132 3133 3156 3177 3185 3199 3220 3232
Kenwood 3021 3050 3218 3224 3225 3234 3235
Konka 3003
Koss 3006 3085 3174
Lasonic 3022
Magnavox 3043 3081 3131 3204
Marantz 3105
Memorex 3023
Mintek 3024
Mitsubishi 3000 3069 3089 3095
NAD 3014 3025
Nakamichi 3026
Norcent 3027
Onkyo 3028 3175 3180
Oritron 3032
Panasonic 3029 3050 3051 3059 3128 3145 3154 3162
3169 3172 3184 3188 3193 3196 3205 3239
Philips 3030 3043 3063 3065 3092 3096 3131 3147
3158 3178 3186 3201 3209 3212 3213 3222
Pioneer 3031 3058 3080 3093 3099 3108 3176 3191
3198 3211 3219 3221
Polaroid 3146

51

Remote Code

List

DVD

Brand

Code

DVD

Proscan 3090 3107
Qwestar 3032
RCA 3052 3061 3062 3067 3123 3136 3152 3157
3165 3202
Sampo 3033
Samsung 3034 3072 3122 3125 3126 3137 3141 3166
3194 3200 3207 3216 3228 3230
Sansui 3035 3160
Sanyo 3004 3148
Sharp 3036 3037 3134 3164 3203
Sherwood 3038
Sony 3001 3039 3047 3048 3049 3053 3054 3055
3057 3060 3073 3074 3077 3086 3088 3091
3097 3098 3101 3102 3121 3135 3168 3170
3171 3173 3227
Sylvania 3015 3153 3163 3187 3189
Teac 3040
Technics 3050
Techwood 3041
Toshiba 3042 3043 3066 3068 3078 3087 3129 3130
3149 3150 3155 3161 3181 3192 3197 3206
3238
Venturer 3007
Yamaha 3050 3190 3195 3210 3223 3233 3236
Zenith 3014 3044 3138 3206

DVD Recorder

Irradio 3020
Panasonic 3112 3114 3118
Philips 3110 3113 3117 3119
Pioneer 3115 3116
RCA 3109

52

Remote Code List

Device Type Brand

Count

Code

DVD

Brand

Code

DVD Recorder

Sony 3111
Yamaha 3120

DVD/LD

Pioneer 3031 3058

DVD/VCR Combo

Broksonic 3127
Daewoo 3142
Emerson 3147
Go Video 3138 3139 3143 3144
Hitachi 3140
JVC 3124 3132 3133
Magnavox 3131
Panasonic 3128 3145
Philips 3131
Polaroid 3146
RCA 3123 3136
Samsung 3122 3125 3126 3137 3141
Sanyo 3148
Sharp 3134
Sony 3121 3135
Toshiba 3043 3129 3130
Zenith 3138

DVD-DVR

RCA 3182
Toshiba 3183

HTIB

BOSE 3159
Denon 3179
JBL 3005 3070
JVC 3103 3104 3177
Koss 3006 3174

53

Remote Code List

DVD

Brand

Code

HTIB

Onkyo 3175 3180
Panasonic 3169 3172
Philips 3178
Pioneer 3108 3176
RCA 3109
Sony 3102 3167 3168 3170 3171 3173
Toshiba 3181
Venturer 3007

Network DVD

Go Video 3237

Portable DVD

Audiovox 3084
CyberHome 3045
Panasonic 3050 3082

Receiver

JBL 3070

TV/DVD Combo

Apex 3151
Broksonic 3160
JVC 3156 3185
Panasonic 3184
Philips 3147 3158 3186
RCA 3152 3157
Sansui 3160
Sylvania 3153
Toshiba 3149 3150 3155

TV/DVD/Tuner Combo

Panasonic 3154

TV/DVD/VCR Combo

Panasonic 3188
RCA 3165

54

Remote Code List

DVD

Brand

Code

TV/DVD/VCR Combo

Samsung 3166
Sharp 3164
Sylvania 3163 3187 3189
Toshiba 3161

TV/DVD/VCR/Tuner Combo

Panasonic 3162 3239

Amplifier

Yamaha 4012 4015 4017

Audio System

Philips 4155
Pioneer 4154
RCA & Dimensia 4000

Car Receiver/Tuner

Pioneer 4030

HTIB

BOSE 4131
Denon 4143
JBL 4020 4146
JVC 4028 4141 4149 4171
Koss 4128 4138
Onkyo 4139 4144
Panasonic 4132 4136
Philips 4142
Pioneer 4035 4140
RCA 4060
Sony 4129 4130 4133 4135 4137 4147
Toshiba 4145
Venturer 4134

LCD TV

AuDIO

Brand

Code

55

Remote Code List

AuDIO

Brand

Code

LCD TV

Viewsonic 4000

LCD TV/Tuner Combo

Polaroid 4148

Receiver

JBL 4020

Receiver/Amplifier

Yamaha 4015 4017

Receiver/Tuner

Aiwa 4001 4069 4076 4117 4120
BOSE 4127 4131
Denon 4010 4022 4023 4056 4061 4062 4072 4077
4078 4090 4091 4093 4095 4100 4101 4103
4107 4143 4156 4158 4170 4174 4175 4177
4178
Harman Kardon 4172
Harman Kardon 4006 4098 4118
JBL 4006 4020
JVC 4000 4025 4026 4027 4028 4058 4059 4083
4094 4110 4112 4141 4149 4167 4171
Kenwood 4002 4042 4043 4044 4047 4054 4057 4071
4074 4086 4096 4162 4165 4173
Marantz 4119
Mitsubishi 4106 4161 4176
Onkyo 4007 4048 4049 4051 4055 4065 4068 4070
4084 4088 4092 4097 4104 4105 4108 4109
4139 4144 4163 4164 4166 4168 4169 4181
Optimus 4011
Panasonic 4008 4081 4121 4132 4136 4160
Philips 4142 4155

56

Remote Code List

AuDIO

Brand

Code

Receiver/Tuner

Pioneer 4005 4029 4035 4037 4040 4050 4052 4067
4073 4075 4085 4087 4099 4140 4154 4180
RCA 4003 4060
Sherwood 4009
Sony 4004 4014 4031 4032 4033 4034 4036 4038
4039 4041 4046 4063 4113 4114 4115 4116
4130 4137 4147 4179
Technics 4008 4013 4016 4018 4019 4064 4066 4079
4082 4089 4157
Toshiba 4145
Wards 4005
Yamaha 4005 4021 4024 4045 4053 4080 4102 4111
4159

Tuner

Koss 4128 4138
Panasonic 4122 4123 4124 4125 4126 4150 4151 4153
4182
Philips 4152
Polaroid 4148
Sony 4133 4135
Venturer 4134

Tuner/CD Combo

BOSE 4127

TV/DVD/ Tuner Combo

Panasonic 4124

TV/DVD/VCR/Tuner Combo

Panasonic 4126 4153

TV/VCR/Tuner Combo

Panasonic 4121 4122 4123 4125 4150 4151 4182
Philips 4152

57

Remote Code List

HTIb

Brand

Audio

Code

DVD

Code

HDTV TuneR

Brand

Code

HTIB

BOSE 4131 3159
Denon 4143 3179
JBL 4020 3070
4146 3005
JVC 4028 3104
4141 3177
4149 3103
Koss 4128 3006
4138 3174
Onkyo 4139 3175
4144 3180
Panasonic 4132 3169
4136 3172
Philips 4142 3178
Pioneer 4035 3108
4140 3176
RCA 4060 3109
Sony 4129 3167
4130 3168
4133 3170
4135 3171
4137 3173
4147 3102
Toshiba 4145 3181
Venturer 4134 3007

HDTV Tuner

Panasonic 7000
RCA 7001 7002

58

Remote Code List

DVR

Brand

Code

Digital Network Recorder

Sony 3244

DVR

Panasonic 3242
Philips 3240
RCA 3243
Replay TV 3241
Tivo 3243

PVR

Replay TV 3246
Tivo 3245

59

Notes

60 61

Notes

US Patent Numbers: 5,440,326; 5,898,421; 5,825,350 and other pending patents GYR4101US

© 2007 GYRATION INC • 12950 Saratoga Ave. • Saratoga, CA 95070 USA • www.gyration.com

Made in China. DL02907-001