GULLCO 350, 350-220, 350-E, 350-220-S Parts List & Operating Instructions

350 LB (159 KG) CAPACITY

ELECTRODE STABILIZING

OVEN

MODELS:

350

350-E

350-220

350-220-S

PARTS LIST

&

OPERATING INSTRUCTIONS

Website: www.gullco.com

Distributed by:

Phone: [phone] Fax: [phone] e-mail: [e-mail]

Phone: [phone] Fax: [phone] e-mail: [e-mail]

Phone: [phone] Fax: [phone] e-mail: [e-mail]

Phone: [phone] Fax: [phone] e-mail: [e-mail]

Phone: [phone] Fax: [phone] e-mail: [e-mail]

GULLCO INTERNATIONAL LIMITED – CANADA
GULLCO INTERNATIONAL INC. – U.S.A.
GULLCO INTERNATIONAL [U.K.] LIMITED - EUROPE
GULLCO INTERNATIONAL PTY LIMITED - AUSTRALIA
GULLCO INTERNATIONAL INDIA PVT LTD. – INDIA
GULLCO INTERNATIONAL SHANGHAI LIMITED - CHINA

Phone: [phone] Fax: [phone] e-mail: [e-mail]

Revised: February 14, 2016 GD-019.docx

SAFETY INSTRUCTIONS

Although the Gullco Model 350 series of Electrode Stabilizing Ovens are manufactured for safe and
dependable operation, it is impossible to anticipate those combinations of circumstances, which
could result in an accident. An operator of this equipment is cautioned to always practice "Safety
First" during each phase of setup, operation and maintenance.

Read and understand the whole operation manual before operating or performing service of this
equipment. Become familiar with the ovens operation, applications and limitations. Keep the
operation manual in a clean and readily available location.

A careless operator invites troubles, and failure to follow safety practices may cause serious injury
or even death. Important safety precautions are given in the following:

Electrical Shock Prevention

 Do not use this equipment in damp or wet locations.
 Do not expose this equipment to rain.
 Never carry this equipment by the power cord or pull the power cord to disconnect from the

receptacle.

 Keep the power cord from heat, oil and sharp edges.
 Inspect the power cord periodically and replace if damaged.
 Inspect the secureness of the power cord periodically and repair if loose.
 Disconnect the power cord when not in use.
 Disconnect the power cord positively to prevent electrical shock before repair and service

of the equipment.

Bodily Injury Prevention

 Do not stack Model 350 Ovens higher than four ovens.
 Wear suitably rated thermal gloves, aprons, etc., when handling the oven or contents after

the oven has been energized.

IMPORTANT! BEFORE CONNECTION: ENSURE THAT SUPPLY VOLTAGE MATCHES THAT

SHOWN ON THE PRODUCT LABEL/RATING PLATE

NOTE Other important safety instructions are given elsewhere in this manual. Make sure that you

read, understand and follow all such instructions.

ALL THE SAFE PRACTICES AND PRECAUTIONS MAY NOT BE GIVEN IN WRITING. SOME

ARE BASED ON COMMON SENSE, BUT OTHERS MAY REQUIRE TECHNICAL

BACKGROUND TO EXPLAIN.

1