GSI PNEG-1471 User Manual

Download

PNEG-1471

Vision Series Model 2400 Portable Dryer

Parts Manual

PNEG-1471

Date: 11-17-12

2 PNEG-1471 Vision Series Model 2400 Portable Dryer

Table of Contents

Chapter 1 Bottom Module .....................................................................................................................................4

Frame Assembly ................................................. ... ... .... ... ... .................................................................. 4

Frame, Auger Trough and Hopper Bulkheads ...................................................................................... 7

Meter Rolls and their Placement in the Dryer ....................................................................................... 9

Inside (Plenum) Screens and Plenum Closure Doors ......................................................................... 11

Outside Screens and Meter Roll Access Door .................................................................................... 13

Plenum Divider .................................................................................................................................... 14

Clean Out Doors ................................................................................................................................. 15

Module Support Pads and Stiffener Attach Angles ............................................................................. 17

Front Ladder Assembly ....................................................................................................................... 19

Rear Ladder Assembly ........................................................................................................................ 20

Front End Panels, Fan Support and Grill Guards ............................................................................... 21

Rear End Panels and Rear Access Door ............................................................................................ 22

Bottom Auger ...................................................................................................................................... 23

Bottom Auger Drive ............................................................................................................................. 25

Meter Roll Drive .................................................................................................................................. 27

Chapter 2 Top Module .........................................................................................................................................29

Frame and Lower Basket ................................................................. ... ... .... ... ... ... ................................ 29

Inside (Plenum) Screens and Outside Screens ............................................... ... .... ... ... ... ... .... ... ... ... ... 33

Stiffener Attach Angles and Crane Brackets ....................................................................................... 34

Front End Panels, Fan Support, Grill Guard and Venturi .............. ................................................ ...... 35

Rear End Panels, Rear Access Door, Front and Rear Ladders .......................................................... 36

Top Auger with Wet Bin Assembly ...................................................................................................... 37

Top Auger Drive .................................................................................................................................. 39

Chapter 3 Fan/Heaters .........................................................................................................................................41

Fan/Heater Housing Assembly ................. ... .... ... ... ... .... ... ... ... .... ......................................................... 41

Fan Motor, Motor Mount and Fan Blade ............................................................................................. 43

Air Mixer Assemblies ........................................................................................................................... 44

Flame Probe, Ignitor and Burner Assemblies ........... .... ... ... ... .... ... ... ... ... ............................................. 45

LP Pipe Train Assemblies ................................................................................................................... 47

NG Pipe Train Assemblies .................................................................................................................. 53

Fan/Heater Orifices ............. ... ... ....................................................... ... ... .... ... ... ... ................................ 56

LP Supply Lines (Bottom Module) ....................................................................................................... 57

NG Supply Lines (Bottom Module) ...................................................................................................... 59

Chapter 4 Electrical (Bottom Module) ................................................................................................................62

Plenum, Right Grain High-Limit Thermostat Operator Light ............................................................... 62

Left Grain High-Limit Thermostat ........... ... ... .... ... ... ... .... ... ... ... .... ... ... ... ................................................ 63

Lower Junction Box, Meter Roll Motor Conduit and Rear Discharge Conduit .................................... 65

Air Switch Assembly ............................................................................................................................ 67

Chapter 5 Electrical (Top Module) ............................................... ... ... ... .... ... ... ... ... .... ... ... ... .... .............................68

Lower Junction Boxes with Grain High Limit Thermostats .................................................................. 68

Upper Junction Box, Fill Switch Assembly and Plenum High-Limit .. ... ... ............................................. 69

Wire Way Assembly ............... ... ... ....................................................... ... .... ... ... ... .... ... ... ... ... ................ 71

Chapter 6 Control Boxes .....................................................................................................................................72

Fan/Heater Control Box ................... ... ... ... ... .... ....................................................... ... ... ... ... ................ 72

Control Box Switch Panel .................................................................................................................... 74

Lower Control Box Back Panel ..................................................................................................

Control Box Switch Panel (Rear) ........................................................................................................ 76

Vision Control Computer and Touch Display Assembly ...................................................................... 77

Upper Control Box Panel .................................................................................................................... 78

......... 75

Chapter 7 Warranty ..............................................................................................................................................85

PNEG-1471 Vision Series Model 2400 Portable Dryer 3

1. Bottom Module

Right side

Left side

The fan/heater end of the dryer is considered by GSI as the front end of the dryer. (The foreground of this

photograph is the front end. Right and left sides are labeled above.)

Frame assembly (View from fan/heater end with hitch weldment removed.)

Frame Assembly

Figure 1A

NOTE: The parts pointed out on this page are listed on Page 6.

4 PNEG-1471 Vision Series Model 2400 Portable Dryer

Frame Assembly (Continued)

NOTE: The right front corner is shown in the photo. For left front corner, all parts are the same except for the hitch bracket (use 1a for the left side) and the frame rail (use 4a for the left side).

NOTE: The left rear corner is shown in the photo. For right rear corner, all p art s are the same except for the frame rail (use 4 for the right side).

1. Bottom Module

Figure 1B Right Front Corner of Frame

Figure 1C Left Rear Corner of Frame

PNEG-1471 Vision Series Model 2400 Portable Dryer 5

1. Bottom Module

4a4

Frame Assembly (Continued)

Figure 1D Center Cross Ties

Frame Assembly Parts List (See Figures 1A, 1B, 1C and 1D)

Ref # Part # Description

1 D01-0012 Hitch Bracket Right 1 1 1 1 1

1aD01-0011Hitch Bracket Left 11111

2 D01-0008 Front and Rear Frame Tie Channel 4 4 4 6 6 3 D01-0007 Corner Leg Portable Dryer 66688 4 D21-0011 Frame Rail, 14' Right 1

4a D21-0010 Frame Rail, 14' Left 1

4 D31-0044 Frame Rail, 18' Right 1

4a D31-0043 Frame Rail, 18' Left 1

4 D61-0002 Frame Rail, 20' Right 1

4a D61-0001 Frame Rail, 20' Left 1

4 D101-0002 Frame Rail, 22' Right 1

4a D101-0001 Frame Rail, 22' Left 1

2414 2418 2420 2422 2426

Qty

4 D71-0001 Frame Rail, 26' Right 1

4a D71-0002 Frame Rail, 26' Left 1

5 D01-0005 Side Leg Portable Dryer 10 14 16 16 20

6 PNEG-1471 Vision Series Model 2400 Portable Dryer

Frame, Auger Trough and Hopper Bulkheads

Dryer frame and lower basket assembly

(View from the front end of the dryer looking down the left side.)

NOTE: The hole pattern of the Plenum closure door

angles will distinguish between L.H. and R.H.

1. Bottom Module

Figure 1E

NOTE: The parts pointed out on this page are listed on Page 10.

PNEG-1471 Vision Series Model 2400 Portable Dryer 7

1. Bottom Module

Wooden meter roll support bearing

The meter roll sections are spliced

together with a meter roll splice shaft

(part #D31-0046) that passes through

the support bearing assembly.

Dryer frame and lower basket assembly

(View from the rear end of the dryer look ing u p the rig ht sid e.)

11a

Discharge bearing plate

Center hanger

bearing support

and cross

channel seal plate.

Frame, Auger Trough and Hopper Bulkheads (Continued)

Figure 1F

NOTE: The parts pointed out on this page are listed on Page 10.

8 PNEG-1471 Vision Series Model 2400 Portable Dryer

Meter Rolls and their Placement in the Dryer

This end is the front (fan/heater) end of the dryer.

Meter roll bearing

Ref #16, 17 and 18 on Page 10.

NOTE: Ref #22 at the rear of dryer is a front section meter roll that is used as a rear section on 16 and 20 foot dryers only.

Meter roll bearing

Ref #16, 17 and 18 on Page 10.

Meter roll bearing

Ref #16, 17 and 18 on Page 10.

1. Bottom Module

PNEG-1471 Vision Series Model 2400 Portable Dryer 9

Figure 1G

1. Bottom Module

Frame, Auger Trough, Hopper Bulkheads and Metering Rolls Parts List

(See Figures 1E, 1F and 1G)

Ref # Part # Description

2414 2418 2420 2422 2426

1 D01-1136Y Plenum Closure Door Angle, R.H. 6 8 9 10 12 2 D01-1136X Plenum Closure Door Angle, L.H. 7 9 10 11 13 3 D01-0109 Hopper Bulkhead 12 16 18 20 24 4 D01-0004 Gusset Plate 16 20 22 24 28 5 D01-0005 Side Leg 10 14 16 16 20 6D01-0007Corner Leg 66688 7 D01-0011 Hitch Bracket, L.H. 1 1 1 1 1 8D01-0012Hitch Bracket, R.H. 11111 9 D01-0008 Front and Rear Frame Tie Channel 4 4 4 6 6

10D01-2435Bottom Auger Bearing Plate 11111

11 D21-0011 Frame Rail, 14' Right 1 11 D31-0044 Frame Rail, 18' Right 1 11 D61-0002 Frame Rail, 20' Right 1 11 D101-0002 Frame Rail, 22' Right 1 11 D71-0001 Frame Rail, 26' Right 1

Qty

11a D21-0010 Frame Rail, 14' Left 1 11a D31-0043 Frame Rail, 18' Left 1 11a D61-0001 Frame Rail, 20' Left 1 11a D101-0001 Frame Rail, 22' Left 1 11a D71-0002 Frame Rail, 26' Left 1

12 D01-0048 Trough Panel 14 18 20 22 26 13D01-1512Plate, Cross Channel Seal with Tabs 11122 14 D01-1291 Hanger Bearing “C” Channel 1 1 1 2 2 15D01-1290Hanger Bearing “J” Plate 22244 16 D02-0028 Clevis Pin 5/16" x 1-3/4" 32 40 40 48 56 17 D31-0148 Meter Roll Washer 16 20 20 24 28 18 D02-0061 Meter Roll Support Bearing 6 8 8 10 12 19 D01-0177 Support Strap 7 9 10 11 13 20 D01-1511 Plate, End Channel Seal with Tab 2 2 2 2 2 21D01-2434Discharge Plate 11111 22 D31-0031 Meter Roll, Front 2 2 4 2 2 23D31-0030Meter Roll, Intermediate 466810 24 D31-0029 Meter Roll, Rear 2 2 2 2

The part number list above covers all parts pointed out on Pages 7, 8 and 9.

10 PNEG-1471 Vision Series Model 2400 Portable Dryer

Inside (Plenum) Screens and Plenum Closure Doors

20a

This photograph was taken before the front plenum end panel and outer screens were installed in order to get a good view of the inside screens and bulkheads.

10 11

Plenum closure door. Two (2) different plenum closure doors are there. The door shown in the photograph is the rear plenum closure door and is the rear most plenum closure door, Ref #20 (just inside the rear access door), all others are Ref #20a.

NOTE: Ref #22 is the plenum closure door rear frame angle.

1. Bottom Module

Figure 1H Plenum Screens and Bulkheads (View from Front End)

PNEG-1471 Vision Series Model 2400 Portable Dryer 11

1. Bottom Module

Inside (Plenum) Screens and Meter Roll Upper Shield (Continued)

Figure 1I Close Up of Meter Roll Upper Shield Assembly

Inside (Plenum) Screens and Meter Roll Upper Shield Parts List (See Figures 1H and 1I)

Ref # Part # Description

1 D31-0055 Column Bulkhead 12 16 18 20 24

2 D01-0101 Garner Bulkhead 12 16 18 20 24 3a D01-2466 Column End Panel Front Right 1 1 1 1 1 3b D01-2467 Column End Panel Front Left 11111

4 D01-0126 Screen, Plenum Top, Ga, 094 14 18 20 22 26

5 D31-0012 Screen, Plenum Wall, Ga, 094 14 18 20 22 26

6 D01-1225 Screen, Plenum Bottom, Ga, 094 14 18 20 22 26

7 D01-0004 Gusset Plate 16 20 22 24 28

8 D21-0011 Frame Rail, 14' Right 1

8 D31-0044 Frame Rail, 18' Right 1

8 D61-0002 Frame Rail, 20' Right 1

8 D101-0002 Frame Rail, 22' Right 1

8 D71-0001 Frame Rail, 26' Right 1

9 D21-0010 Frame Rail, 14' Left 1

9 D31-0043 Frame Rail, 18' Left 1

9 D61-0001 Frame Rail, 20' Left 1

9 D101-0001 Frame Rail, 22' Left 1

9 D71-0002 Frame Rail, 26' Left 1 10 D01-0007 Corner Leg Portable Dryer 6 6 6 8 8 11 D01-0012 Hitch Bracket Right 1 1 1 1 1 12 D01-0011 Hitch Bracket Left 1 1 1 1 1 13 D01-0008 Front and Rear Frame Tie Channel 4 4 4 6 6 14 D01-2435 Bottom Auger Bearing Plate 1 1 1 1 1 15 D01-0005 Side Leg Portable Dryer 10 14 16 16 20 16 D01-0109 Hopper Bulkhead 12 16 18 20 24 17 D01-0050P Connector Sheet, Perforated 14 18 20 22 26

*18 and 19 D01-1180 Meter Roll Upper Shield Assembly 14 18 20 22 26

18 D01-0431 Meter Roll Strike Off Plate 1/Assembly 19 D01-1226 Meter Roll Shield 1995 Style 1/Assembly 20 D01-1214 Plenum Closure Door, Rear 1 1 1 1 1

20a D01-1134 Plenum Closure Door 6 8 9 10 12

21 DC-974 Danger Foot In Auger Decal 2 2 2 2 2 22 D01-1217 Plenum Closure Door Rear Frame Angle 1 1 1 1 1 23 D61-0038 Bulkhead Stiffener Bar 24 32 36 40 48

* Ref #18 and Ref #19 together make up the meter roll upper shield assembly.

2414 2418 2420 2422 2426

Qty

12 PNEG-1471 Vision Series Model 2400 Portable Dryer

Outside Screens and Meter Roll Access Door

*NOTE: Ref #4 is pointing to the top edge angle gusset. T wo (2) types of gusset are there on the dryer. The photo above distinguishes the difference between the two. The arrows are pointing to a tab on the gusset that makes them different (tabs are “bent” up in photo). Ref #4a is used in two (2) places only; 1) front right of dryer

2) rear left of dryer, all others are Ref #4.

Meter roll access door

1. Bottom Module

Figure 1J

Outside Screens and Meter Roll Access Door Parts List

Ref # Part # Description

1 D01-0127 Screen, Roof, Ga, 094 14 18 20 22 26 2 D31-0013 Screen, Outside Wall, Ga, 094 14 18 20 22 26 3 D01-0128 Screen, Hopper, Ga, 094 14 18 20 22 26 4 D01-0152 Top Angle Gusset - L.H. 12 16 18 20 24

4a D01-0153 Top Angle Gusset - R.H. 2 2 2 2 2

5 D01-0050P Connector Sheet, Perforated 14 18 20 22 26 6 D01-0045P Access Door, Perforated 14 18 20 22 26 7 D01-0039 Door Latch 28 36 40 44 52 8 S-6552 Pin Hair Clip 3/32" ZN Plated 28 36 40 44 52 9 DC-1229 Decal, Warning Meter Roll Rot. 14 18 20 22 26

10 D01-0048 Trough Panel Weldment 14 18 20 22 26

2414 2418 2420 2422 2426

PNEG-1471 Vision Series Model 2400 Portable Dryer 13

Qty

1. Bottom Module

Plenum divider support channels

Right rear plenum divider section with clean out door

Plenum divider floor sections

Plenum Divider

Figure 1K

Plenum Divider Parts List

Ref # Part # Description

1 D31-0259 Plenum Divider Clean Out Door 1 1 1 1 1 2 D31-0260Clean Out Door Guide Plenum 22222 3 D61-0028 Plenum Divider R.H: Rear 1 1 1 1 1 4 D61-0024 Plenum Support Channel 8 10 11 12 14 5 D61-0026 Plenum Divider R.H. 6 8 9 10 12 6 D61-0025 Plenum Divider L.H. 6 8 9 10 12 7 D61-0027 Plenum Divider L.H: Rear 1 1 1 1 1

2414 2418 2420 2422 2426

14 PNEG-1471 Vision Series Model 2400 Portable Dryer

Qty

Clean Out Doors

Clean out door handle mechanism

Front and rear handle mechanisms (rear shown in photo)

Clean out door hinge

NOTE: Ref #9, Ref #10 and Ref #1 1 together create

the clean out door assembly. Three (3) different clean out door assemblies are used on GSI Network dryers:

1) 3 Column clean out door assembly (D51-0077). Ref #8a on the part # listing (See Page 16).

2) 4 Column clean out door assembly (D11-0032). Ref #8b on the part # listing (See Page 16).

3) 5 Column clean out door assembly (D01-0349). Ref #8c on the part # listing (See Page 16).

A 5 column clean out door assembly (D01-0349) is shown in the photograph below.

1. Bottom Module

PNEG-1471 Vision Series Model 2400 Portable Dryer 15

Figure 1L

1. Bottom Module

Clean Out Doors (Continued)

Figure 1M Center Handle Mechanisms (This handle mechanism straddles the center cross channels.)

Clean Out Doors Parts List (See Figures 1L and 1M)

Ref # Part # Description

1 D01-0264 Pivot Rod 25.188" 2 2 2 2 2

1a D31-0162 Pivot Rod 49.625" 11122

2 D01-0296 Linkage Bar Weldment 4 4 4 6 6 3 D01-0261 Linkage Bar, 37" Long 22222

3a D01-0293 Linkage Bar, 30" Long 2 2 2 4 4

4 D01-0294 Clean Out Door Handle 44466 5 S-4378 Plastic Grip 4 4 4 6 6 6 S-248 Washer, Flat 3/8" Uss ZN 8 8 8 12 12 7 S-7241 Cotter Pin, 1/8" x 1-1/4" 8 8 8 12 12

8a D51-0077 Clean Out Door Assembly, 3 Column 1 1

9 D21-0005 Clean Out Door, 67" 1/Assembly 10 D21-0012 Support Channel, Clean Out Door 1/Assembly 11 D01-0308 Clea n Out Door Hinge 2/Assembly 8b D11-0032 Clean Out Door Assembly, 4 Column 1 1 2 2

9 D31-0021 Clean Out Door, 91" 1/Assembly 10 D31-0130 Support Channel, Clean Out Door 1/Assembly 11 D01-0308 Clea n Out Door Hinge 2/Assembly 8c D01-0349 Clean Out Door Assembly, 5 Column 1 2 1

9 D01-0180 Clean Out Door, 115" 1/Assembly 10 D01-0307 Support Channel, Clean Out Door 1/Assembly 11 D01-0308 Clea n Out Door Hinge 3/Assembly 12D01-0175 Hinge Bracket 45667 13 D01-0181 Clean Out Extension, 119-3/4" 2 4 2 13 D31-002 3 Clean Out Extension, 90-3/4" 2 2 4 4 13 D21-0006 Clean Out Extension, 66-3/4" 2 2 14D01-0299 Pivot Rod Bracket 33366

2414 2418 2420 2422 2426

16 PNEG-1471 Vision Series Model 2400 Portable Dryer

Qty

Module Support Pads and Stiffener Attach Angles

Module support pad

Top edge angle splice

See Page 18 for column locations for the upper

module base pads and stiffener attach angles.

1. Bottom Module

Figure 1N

PNEG-1471 Vision Series Model 2400 Portable Dryer 17

1. Bottom Module

Module Support Pads and Stiffener Attach Angles Parts List (See Figure 1N)

Ref # Part # Description

1 D21-0003 Top Edge Angle 71-7/8" 2 2 1 D31-0004 Top Edge Angle 95-7/8" 4 1 D01-0168 Top Edge Angle 119-7/8" 2 4 2 D31-0003 Top Edge Angle Splice 2 2 2 4 4 3 D31-0004 Top Edge Angle 95-7/8" 2 2 4 3 D01-0168 Top Edge Angle 119-7/8" 2 4 D01-0872 Stiffener Attach Angle 6 8 10 10 12 5 D61-0021 Body Tie-In Gusset L.H. 6 8 8 8 10 6 D61-0022 Body Tie-In Gusset R.H. 6 8 8 8 10 7 D61-0012 Crane Bracket 4 4 4 4 4 8 D61-0013 Module Support Pad 6 8 8 8 10

2414 2418 2420 2422 2426

Qty

Figure 1O

18 PNEG-1471 Vision Series Model 2400 Portable Dryer

Front Ladder Assembly

1. Bottom Module

Figure 1P

Front Ladder Assembly Parts List

Ref # Part # Description

1-3 D01-1220 Ladder Assembly Stack Dryer Front 1 1 1 1 1

1 D61-0096 Ladder Rung 12/Assembly 2 D61-0094 Ladder Side Rail - L.H. 1/Assembly 3 D61-0095 Ladder Side Rail - R.H. 1/Assembly 4 D51-0022 Support, Control Panel 7 7 7 7 7 5 F-7060-Y Venturi: 28" Yel/ochre 2 5 CD-0543-Y Venturi: 36" Ochre 2 2 2 5 CD-0545-Y Venturi: 40" Ochre 2 6 D51-0021 Stiffener, Front Fan Support 2 2 2 2 2 7 D31-0082 Front Diagonal Support Channel 2 2 2 2 2

2414 2418 2420 2422 2426

Qty

PNEG-1471 Vision Series Model 2400 Portable Dryer 19

1. Bottom Module

Rear Ladder Assembly

Figure 1Q

Rear Ladder Assembly Parts List

Ref # Part # Description

1-3 D04-0388 Ladder Assembly 1 1 1 1 1

1 D61-0096 Ladder Rung 10/Assembly 2 D61-0092 Ladder Side Rail - L.H. 1/Assembly 3 D61-0093 Ladder Side Rail - R.H. 1/Assembly 4 D61-0097 Ladder Mounting Bracket, Rear 3 3 3 3 3

2414 2418 2420 2422 2426

Qty

20 PNEG-1471 Vision Series Model 2400 Portable Dryer

Front End Panels, Fan Support and Grill Guards

1. Bottom Module

Figure 1R

Front End Panels, Fan Support and Grill Guards Parts List

Ref # Part # Description

1 D61-0023 Top Angle, Fan Support Panel 1 1 1 1 1 2 CD-0576 Grill Guard: CD-28 Black 2 2 CD-0544 Grill Guard: 36" Black 2 2 2

2 CD-0547 Grill Guard: 40" and 42" Black 2 3a D01-2466 Column End Panel Front Right 1 1 1 1 1 3b D01-2467 Column End Panel Front Left 1 1 1 1 1

4 D01-0593 Front Fan Support 2"-28" 1

4 D61-0041 Front Fan Support 2"-36" 1 1 1

4 D71-0008 Front Fan Support 2"-40" 1

5 F-7060-Y Venturi: 28" Yellow/ochre 2

5 CD-0543-Y Venturi: 36" Ochre 2 2 2

5 CD-0545-Y Venturi: 40" Ochre 2

N/S D01-0594 Front End Panel 2"-28" 1 N/S D61-0018 Front End Panel 2"-36" 1 1 1

2414 2418 2420 2422 2426

Qty

PNEG-1471 Vision Series Model 2400 Portable Dryer 21

1. Bottom Module

Rear access door (outside)

Rear access door (inside)

Rear End Panels and Rear Access Door

Ref # Part # Description

1a D01-2476 Column End Panelrear Right 1 1 1 1 1 1b D01-2477 Column End Panel Rear Left 1 1 1 1 1

2 D01-1800-Y Rear End Panel 50/50 29" Doors 1 1 1 1 1 3 D01-0044 Top Angle Bracket Front and Rear 3 3 3 3 3 4 D01-1510 Aspirator End Cap 1 1 1 1 1

5-13 RDA-29-Y Rear Door Assembly 29" Square Ochre 2 2 2 2 2

5 D01-1783-Y Assist Handle 29" Square Door 2/Assembly 6 D01-1781-Y Door 29" Square Ochre 1/Assembly 7 D03-0512 Door Handle, Locking CCW 1/Assembly 8 D01-1782-BLK Frame Angle 29" Door 4/Assembly

9 DC-973 Decal, Danger Fire Hazard 2/Assembly 10 401-4630-0 Hinge Bracket - Square Door 2/Assembly 11 401-4669-8 Hinge - Rear Access Square Door 2/Assembly 12 D01-0397 Latch Bracket 1/Assembly 13 D01-1792 Latch Bar 29" Square Door 1/Assembly

Rear End Panels and Rear Access Door Parts List

Figure 1S

2414 2418 2420 2422 2426

Qty

22 PNEG-1471 Vision Series Model 2400 Portable Dryer

Bottom Auger

Bottom auger

(View From center of dryer to the forward end.)

Bottom auger

(View from center of dryer to the rear end.)

Bottom auger center bearing and support

Bottom auger rear bearing

1. Bottom Module

Figure 1T

PNEG-1471 Vision Series Model 2400 Portable Dryer 23

1. Bottom Module

Rear discharge box

Auger bearing

Bottom Auger (Continued)

Bottom Auger Parts List (See Figures 1T and 1U)

Figure 1U

Ref # Part # Description

1 D01-1214 Plenum Closure Door, Rear 1 1 1 1 1 2 D01-1134 Plenum Closure Door 6 8 9 10 12 3 D21-0017 Auger Bottom Front Weldment 1 1 3 D31-0092 Auger Bottom Front Weldment 1 1 3 D31-0092 Auger Bottom Front Weldment (116-3/8" Long) 1 4 D31-0267 Auger Bottom Rear Weldment 1 1 2 2 4 D61-0184 Auger Bottom Rear Weldment (117-7/8" Long) 1 5D01-1290 Hanger Bearing Bottom J-plate 22244 6 D01-1291 Hanger Bearing Bottom C-channel 1 1 1 2 2 7D01-1246 Hanger Bearing Assembly (Short) 22233 8 D31-0076 Shaft, Auger Splice 2 2 2 3 3

9-19 D01-0481-MS Discharge Box Assembly 1 1 1 1 1

9 D01-1884 Discharge Weldment 1/Assembly 10 D01-1886 Moisture Sampler Tube Cover Plate 1/Assembly 11 D01-0405 Grain Sampler Assembly 1/Assembly 12 D01-1752 Discharge Side Cover 1/Assembly 13 D01-1751 Discharge Side Panel MC 1/Assembly 14 D31-0298 Discharge Side Panel 1/Assembly 15 D01-1885 Moisture Sampler Cover Plate 1/Assembly 16 D01-1650 Rear Auger Bearing Shield 1/Assembly 17 D31-0299 Discharge Box Bearing Plate 1/Assembly 18 D01-0466 Discharge Top Panel 1/Assembly 19 D01-0467 Discharge Top Flapper 1/Assembly 20 D32-0001 Flangette Bearing 1 1 1 1 1 21 D31-0005 Shaft, Top and Bottom Auger Stub 1 1 1 1 1

* D31-0079 Discharge Auger Weldment 1 1 1 1 1

* Not Shown

2414 2418 2420 2422 2422

Qty

24 PNEG-1471 Vision Series Model 2400 Portable Dryer

Bottom Auger Drive

Bottom auger motor and motor mount

Bottom auger drive components

Forward drive tension adjustment

Rear drive tension adjustment

1. Bottom Module

Figure 1V

PNEG-1471 Vision Series Model 2400 Portable Dryer 25

1. Bottom Module

Bottom Auger Drive (Continued)

Figure 1W Bottom Auger and Metering Roll Drive Guard

Bottom Auger Drive Parts List (See Figures 1V and 1W)

Ref # Part # Description

1 D01-1376 Bottom Front Angle Bracket 1 1 1 1 1 2 MHC00490 V-belt Bx82 22222 3 2818-2 Sheave 2 Gr 3.35 D x 1-1/8" 1 1 3 D62-0003 Sheave 2 Gr 4.25 D x 1-3/8" 1 1 1 4 D01-0012 Hitch Bracket, Right 1 1 1 1 1 5D01-1373 Beltguard, Unload Motor Shroud 11111 6 D01-0029 Hitch Weldment 1 1 1 1 1 7D01-0011 Hitch Bracket, Left 11111 8 D01-2435 Front Bearing Plate 2008 1 1 1 1 1

9D03-0304 Sheave 2 Gr 20" Gripbelt 11111 10 D32-0019 Bushing Q1 - 1-1/2" Split Taper 1 1 1 1 1 11D01-0065 Spacer, Bearing Shield 22222

*12 500-1 Motor 5 HP 1 PH 1800 RPM 1

12 500-3 Motor 5 HP 3 PH 1800 RPM 1 1 12 712-3 Motor 7.5 HP 3 PH 1800 RPM 1 1 12 1000-3 Motor 10 HP 3 PH 1800 RPM 1 13 D01-0081 Motor Mount Bottom Auger 1 1 1 1 1 14 D01-0008 Front and Rear Frame Tie Channel 44466 15 D01-0007 C orner Leg 6 6 6 8 8 16D01-0017 Motor Adjustment Bracket 22222 17 D21-0011 Frame Rail, 14' R.H. 1 17 D31-0044 Frame Rail, 18' R.H. 1 17 D61-0002 Frame Rail, 20' R.H. 1 17 D101-0002 Frame Rail, 22' R.H. 1 17 D71-0002 Frame Rail, 26' R.H. 1 18 D01-0016 Motor Mount Support Bracket 11111 19 D01-1372 Beltguard, Unload Front Shield 1 1 1 1 1 20PR-331 Peak Cap Handle 22222 21 DC-971 Decal, Belt Drive Warning 2 2 2 2 2 22DC-972 Decal, Chain Warning 22222

* Ref #12, Part #500-1 is a single phase motor.

2414 2418 2420 2422 2426

Qty

26 PNEG-1471 Vision Series Model 2400 Portable Dryer

Meter Roll Drive

Meter roll drive train components

SCR Motor/reduction drive and motor mount assembly

1. Bottom Module

Figure 1X

PNEG-1471 Vision Series Model 2400 Portable Dryer 27

1. Bottom Module

Front meter roll bearing

Rear meter roll bearing

Meter Roll Drive (Continued)

Figure 1Y

Meter Roll Drive Parts List (See Figures 1X and 1Y)

Ref # Part # Description

1 D01-0007 Corner Leg Portable Dryer 6 6 6 8 8 2 D21-0010 Frame Rail, 14' Left 1 2 D31-0043 Frame Rail, 18' Left 1 2 D61-0001 Frame Rail, 20' Left 1 2 D101-0001 Frame Rail, 22' Left 1 2 D71-0002 Frame Rail, 26' Left 1 3 D01-0016 Motor Mount Support Bracket 1 1 1 1 1 4 D01-0081 Motor Mount 1 1 1 1 1 5 D01-0704 SCR Motor Gear Box Mount 1 1 1 1 1 6 D01-0008 Front and Rear Frame Tie Channel 4 4 4 6 6 7 D03-0232 Motor 3/4 HP DC with Gear Box 50:1 1 1 1 1 1 8 D01-2435 Front Bearing Plate 2008 1 1 1 1 1 9 D02-0029 Sprocket 40 H 30 2 2 2 2 2

10 D31-0316 Front Bottom Auger Shaft 1 1 1 1 1

11 D32-0001 Flangette Bearing 1-1/2" 2 2 2 2 2 12 D01-0196 Sprocket Idler Assembly 2 2 2 2 2 13 D03-0257 Sprocket 4015 x 7/8" Bore with keyway 1 1 1 1 1 14 S-9168 Key Square 1/4" x 1" 3 3 3 3 3 15 S-6290 Chain #40 Roller Chain 6' 6' 6' 6' 6' 16 D02-0031 #40 Chain Connecting Link 1 1 1 1 1 17 DC-972 Decal, Chain Warning 2 2 2 2 2 18 D01-0003 Adaptor Plate 4 4 4 4 4 19 GK1583 Flangette Bearing 1", with Lock Collar 4 4 4 4 4 20 D01-0006 Meter Roll Drive Shaft (Front) 2 2 2 2 2 21 D01-0272 Meter Roll Shaft Stub (Rear) 2 2 2 2 2

2414 2418 2420 2422 2426

Qty

28 PNEG-1471 Vision Series Model 2400 Portable Dryer

Frame and Lower Basket

2. Top Module

Figure 2A Front View of the Frame Components

NOTE: The parts pointed out on this page are listed on Page 32.

PNEG-1471 Vision Series Model 2400 Portable Dryer 29

2. Top Module

Frame and Lower Basket (Continued)

Figure 2B Rear Front View of the Frame and Lower Basket Components

NOTE: The parts pointed out on this page are listed on Page 32.

30 PNEG-1471 Vision Series Model 2400 Portable Dryer

Frame and Lower Basket (Continued)

2. Top Module

Figure 2C Front View of the Frame and Lower Basket Components

PNEG-1471 Vision Series Model 2400 Portable Dryer 31

2. Top Module

Frame and Lower Basket (Continued)

Figure 2D

Frame and Lower Basket Parts List (See Figures 2A, 2B, 2C and 2D)

Ref # Part # Description

1 D01-0012 Hitch Bracket Right 1 1 1 1 1 2D01-0011 Hitch Bracket Left 11111 3 D21-0011 Frame Rail, 14' Right 1 3 D31-0044 Frame Rail, 18' Right 1 3 D61-0002 Frame Rail, 20' Right 1 3 D101-0002 Frame Rail, 22' Right 1 3 D71-0001 Frame Rail, 26' Right 1 4 D21-0010 Frame Rail, 14' Left 1 4 D31-0043 Frame Rail, 18' Left 1 4 D61-0001 Frame Rail, 20' Left 1 4 D101-0001 Frame Rail, 22' Left 1 4 D71-0002 Frame Rail, 26' Left 1 5 D61-0048 Frame Tie Channel 2 2 2 2 2 6 D01-0007 Corner Leg Portable Dryer 66688 7 D01-0005 Side Leg Portable Dryer 10 14 16 16 20 8D01-0004 Gusset Plate 1620222428 9 D01-0101 Garner Bulkhead 24 32 36 40 48

10 D61-0077 Connecting Section End 22222

11 D61-0017 Screen, Connecting - Inner, Ga, 094 14 18 20 22 26 12 D61-0103P Connecting Bulkhead Extension 12 16 18 20 24 13 D61-0073 Screen, Connecting - Outer, Ga, 094 14 18 20 22 24 14 D61-0019 Module Tie Brace 6 8 10 10 12

2414 2418 2420 2422 2426

Qty

32 PNEG-1471 Vision Series Model 2400 Portable Dryer

Inside (Plenum) Screens and Outside Screens

*NOTE: Ref #4 is pointing to the top edge angle gusset. Two (2) types of gusset are there on the dryer. The

photo above distinguishes the difference between the two.The arrows are pointing to a tab on the gusset that makes them different (tabs are “bent” up in photo). Ref #4a is used in two places only; 1) front right of dryer

2) rear left of dryer, all others are Ref #4.

10b

10a

2. Top Module

Figure 2E

Ref # Part # Description

1 D01-0126 Screen, Plenum Top, Ga, 094 14 18 20 22 26 2 D31-0012 Screen, Plenum Wall, Ga, 094 14 18 20 22 26 3 D01-0124 Screen, Plenum Bottom, Ga, 094 14 18 20 22 26 4 D01-0152 Top Angle Gusset - L.H. 12 16 18 20 24

4a D01-0153 Top Angle Gusset - R.H. 2 2 2 2 2

5 D01-0127Screen, Roof, Ga, 094 1418202226 6 D31-0013 Screen, Outside Wall, Ga, 094 14 18 20 22 26 7 D01-0128 Screen, Hopper, Ga, 094 14 18 20 22 26 8 D61-0019 Module Tie Brace 6 8 10 10 12

9 D61-0073 Screen, Connecting - Outer, Ga, 094 14 18 20 22 24 10a D01-2476 Column End Panel Rear Right 1 1 1 1 1 10b D01-2477 Column End Panel Rear Left 1 1 1 1 1

The Top Module of the 2400 series dryers have a split plenum the same as the Bottom Module.

Inside (Plenum) Screens and Outside Screens Parts List

2414 2418 2420 2422 2426

Qty

See Page 14 for plenum divider part numbers.

PNEG-1471 Vision Series Model 2400 Portable Dryer 33

2. Top Module

See Page 18 for the locations of the stiffener attack angle.

Stiffener Attach Angles and Crane Brackets

Figure 2F

Stiffener Attach Angles and Crane Brackets Parts List

Ref # Part # Description

1 D61-0015 Top Module Crane Bracket 4 4 4 4 4 2 D61-0014 Hoisting Spreader Bar 2 2 2 2 2 3 D01-0872 Stiffener Attach Angle 6 8 10 10 12

34 PNEG-1471 Vision Series Model 2400 Portable Dryer

2414 2418 2420 2422 2426

Qty

Front End Panels, Fan Support, Grill Guard and Venturi

Service platform attach bracket

2. Top Module

Figure 2G

Front End Panels, Fan Support, Grill Guard and Venturi Parts List

Ref # Part # Description

1 D61-0023 Top Angle, Fan Support Panel 2 2 2 2 2 2D61-0306 Fan Support Extension, 42" Fans 11111 3 D61-0307 Top Angle (Notched) Fan Support Panel 1 1 1 1 1 4D01-1829 Stiffener, Fan Support Ext. 22222

5 CD-0547 Grill Guard: 40" and 42" Black 1 1 1 1 1 5a CD-0545-Y Venturi, 40" 1 5a CD-0546-Y Venturi, 42" 1 1 1 1

6 D01-2466 Column End Panel 44444

7 D01-1458 Front Fan Support, 1"-40" 1

7D51-0132 Front Fan Support, 1"-42" 1111

8 D01-0011 Hitch Bracket, L.H. 1 1 1 1 1

8D01-0012 Hitch Bracket, R.H. 11111

9 D61-0054 Platform Attach Bracket 2 2 2 2 2 10D01-0029 Hitch Weldment 11111 11 D51-0022 Support, Control Panel 6 6 6 6 6 12D01-0062 Front Diagonal Support Channel 22222 13 D51-0021 Stiffener, Front Fan Support 2 2 2 2 2 14 D01-1459 Front End Panel 1"-40" 1 14 D51-0131 Front End Panel 1"-42" 1 1 1 1

2414 2418 2420 2422 2426

Qty

PNEG-1471 Vision Series Model 2400 Portable Dryer 35

2. Top Module

Rear access door (outside)

Rear access door (inside)

NOTE: The ladder assembly shown above is the same for the front and rear on upper modules.

Rear End Panels, Rear Access Door, Front and Rear Ladders

Figure 2H

Rear End Panels, Rear Access Door, Front and Rear Ladders Parts List

Ref # Part # Description

1 D01-1780-Y Rear End Panel 1 1 1 1 1 2a D01-2476 Column End Panel Rear Right 11111 2b D01-2477 Column End Panel Rear Left 1 1 1 1 1

3 D61-0097 Ladder Mounting Bracket, Rear 3 3 3 3 3

4-6 D01-1220 Ladder Assembly Stack Dryer Front 1 1 1 1 1

4 D61-0096 Ladder Rung 12/Assembly

5 D61-0094 Ladder Side Rail - L.H. 1/Assembly

6 D61-0095 Ladder Side Rail - R.H. 1/Assembly

7-15 RDA-29-Y Rear Door Assembly 29" Square Ochre 1 1 1 1 1

7 D01-1783-Y Assist Handle 29" Square Door 2/Assembly

8 D01-1781-Y Door 29" Square Ochre 1/Assembly

9 D03-0512 Door Handle, Locking CCW 1/Assembly 10 D01-1782-BLK Frame Angle 29" Door 4/Assembly 11 DC-973 Decal, Danger Fire Hazard 2/Assembly 12 401-4630-0 Hinge Bracket - Square Door 2/Assembly 13 401-4669-8 Hinge - Rear Access Square Door 2/Assembly 14 D01-0397 Latch Bracket 1/Assembly 15 D01-1792 Latch Bar 29" Square Door 1/Assembly

24142418242024222426

36 PNEG-1471 Vision Series Model 2400 Portable Dryer

Qty

Top Auger with Wet Bin Assembly

T op auger wit h wet bin (switch p addle e nd)

Top auger (fill end)

Top auger bearing support (inside view)

14a

Top auger bearing support

2. Top Module

PNEG-1471 Vision Series Model 2400 Portable Dryer 37

Figure 2I

2. Top Module

Top Auger with Wet Bin Assembly Parts List (See Figure 2I)

Ref # Part # Description

1 D01-1521 Wet Bin Side, 4' Side Galv. Perfed 4 4 2 4 1 D01-1522 Wet Bin Side, 6' Side Galv. Perfed 26466 2 D01-0103 Mercury Switch Shaft 1 1 1 1 1 3 D21-0003 Top Edge Angle 71-7/8" 2 2 3 D31-0004 Top Edge Angle 95-7/8" 2 2 4 4 3 D01-0168 Top Edge Angle 1 19-7/8" 2 4 2

3a D31-0003 Top Edge Angle Splice 2 2 2 4 4

5 D01-0147 Top Auger Housing Hinge L.H. 22222 6 D01-0167 Mercury Switch Paddle Weldment 1 1 1 1 1 7 D21-0015 Auger Top Front Weldment 1 1 7 D31-0091 Auger Top Front Weldment 1 1 1 7 D31-0267 Auger Top and Bottom Weldment 1 1 2 2 7 D61-0184 Auger Weldment 117-7/8" 1 8 D01-0148 Top Auger Housing Hinge R.H. 22222

9 D01-1525 Wet Bin End 2 2 2 2 2 10 D21-0002 Top Auger Trough Side/6' 2 2 10 D31-0010 Top Auger Trough Side/8' 2 2 4 4 10 D01-0161 Top Auger Trough Side/10' 2 4 2

11 D01-1650 Rear Auger Bearing Cover 1 1 1 1 1 12 D31-0028 Top Auger Housing End 22222 13 D32-0001 Bearing 1-1/2" Diameter with Flangette 2 2 2 2 2 14 D31-0090 Shaft, Top Auger Front 11111

14a D31-0005 Shaft, Top Auger Stub Rear 1 1 1 1 1

15D01-1123 Top Auger Cover, 30-1/4" 11111 15 D01-1124 Top Auger Cover, 24-1/4" 3 5 7 5 7 15D01-1125 Top Auger Cover, 20-1/4" 22244 16 D31-0015 Top Auger Bearing Support 1 1 1 2 2 17D31-0011 Center Stabilizer Beam 11122 18 D31-0009 Gusset Attach Bracket 2 2 2 4 4 19 D31-0001 Center Handrail Gusset L.H. 22244 20 D31-0002 Center Handrail Gusset R.H. 2 2 2 4 4 21 D21-0001-Y Hand Rail Support, 1" EMT x 71-3/4" 2 2 21 D31-0006-Y Hand Rail Support, 1" EMT x 95-3/4" 2 2 4 4 21 D01-0151-Y Hand Rail, 1" Emt x 119-3/4" Long 2 4 2 22 D01-0140 Hanger Bracket - Handrail Galv. 16 16 16 24 24 23 D31-0008 Top Auger Trough Splice 22244 24 D01-1245 Top Auger Bearing Hanger Assembly 1 1 1 2 2 25 D31-0076 Shaft, Auger Splice 11122

2414 2418 2420 2422 2426

Qty

38 PNEG-1471 Vision Series Model 2400 Portable Dryer

Top Auger Drive

Top auger drive components

Belt guard upper mount

Top auger belt guard cover

2. Top Module

PNEG-1471 Vision Series Model 2400 Portable Dryer 39

Figure 2J

2. Top Module

Top Auger Drive (Continued)

Figure 2K Top Auger Motor and Motor Mount

Top Auger Drive Parts List (See Figures 2J and 2K)

Ref # Part # Description

1 D01-0453 Top Auger Beltguard Body 1 1 1 1 1 2 D52-0001 Sheave 2 Gr. 16" Gripbelt 11111 3 D32-0019 Bushing Q1 - 1-1/2" Split Taper 1 1 1 1 1 4 D01-0464 V-belt Bx97 22222 5 2818-2 Sheave 2 Gr 3.35 D x 1-1/8" Bore 1 1 5 D62-0003 Sheave 2 Gr 4.25 D x 1-3/8" 1 1 1 6 D01-0155 Mounting Bracket - Belt Guard Spacer 1 1 1 1 1 7 D01-0424 Dryer Top Hand Hold 11111

* 8 500-1 Motor 5 HP 1 PH 1800 RPM 1

8 500-3 Motor 5 HP 3 PH 1800 RPM 1 1 8 712-3 Motor 7.5 HP 3 PH 1800 RPM 1 1 8 1000-3 Motor 10 HP 3 PH 1800 RPM 1 9 D01-0173 Top Motor Mount Weldment 1 1 1 1 1

10 D01-0465 Turnbuckle 1/2" x 6" Plated 11111

11 D01-0170 Anchor Bracket Motor Mount 1 1 1 1 1 12 D01-0452-Y Top Auger Beltguard Cover Ochre 11111 13 DC-971 Decal, Belt Drive Warning 2 2 2 2 2 14 FH-4429-1 Latch 3 3 3 3 3

*Ref #8, Part #500-1 is a single phase motor.

2414 2418 2420 2422 2426

Qty

40 PNEG-1471 Vision Series Model 2400 Portable Dryer

3. Fan/Heaters

10a

28'' Burner support and collector cup

Fan/Heater housing assembly

36''- 40'' Burner support and collector cup

Fan/Heater Housing Assembly

Figure 3A

PNEG-1471 Vision Series Model 2400 Portable Dryer 41

3. Fan/Heaters

Fan/Heater Housing Assembly Parts List (See Figure 3A)

Ref # Part # Description

1 D01-1996 Wrapper, 28" Fan/Heater 1 1 D01-1963 Wrapper, 36" Fan/Heater 1 1 1 D01-1997 Wrapper, 40" Fan/Heater 1 2 D01-0529 Straightening Vane, 28" Fan/Heater 11 2 D01-1452 Straightening Vane, 36"-42" Fan/Heater 11 11 11 3 D01-0528 Inner Can, 26" and 28" Fan/Heater 1 3 D01-1480 Inner Can, 36" Fan/Heater 1 1 3 D01-1479 Inner Can, 40" Fan/Heater 1 4 401-5759-6-B Access Door - Galv. Fan Black 1 1 1 1 5 069-1303-2 Sight Glass 1111 6 DC-1224 Decal, Danger High Voltage 1 1 1 1 7DC-1225 Decal, Warning Rotating Blade 1111 8 DC-1227 Decal, Warning Fire 1 1 1 1

9 HF-983 Collector Cup, 28" Fan/Heater 1 9a D01-1484 Collector Cup, 36" Fan/Heater 1 1 9a D01-1485 Collector Cup, 40" Fan/Heater 1 10 HF-7092 Support Plate, 28" Fan/Heater 1

10a D01-1482 Support Bracket, 36" Fan/Heater 1 1 10a D01-1483 Support Bracket, 40" Fan/Heater 1

2812 3612 3615 4025

Qty

Matching the right size Fan/Heater to the model number of the dryer.

Figure 3B

42 PNEG-1471 Vision Series Model 2400 Portable Dryer

Fan Motor, Motor Mount and Fan Blade

Fan motor and motor mount

Fan blade and bushing

3. Fan/Heaters

Fan/heater;

(Diamater, HP)

28" 12 HP

36" 12 HP

36" 15 HP

Figure 3C

Fan Motor, Motor Mount and Fan Blade Parts List

Part #

Ref #

1 D01-0530 D01-0530 D01-0530 D01-0530 D01-0530 Motor Mount 2 CD-0110 CD-0239 CD-0239 CD-0239 D03-0193 Motor 3 D03-0302 D03-0302 D03-0302 D03-0302 D03-0302 Fan Blade 4 PT0778 PT0778 PT0778 PT0778 PT0778 Bushing 1 D01-1478 D01-1478 D01-1478 D01-1478 D01-1478 Motor Mount * CD-0233 CD-0233 CD-0233 CD-0233 CD-0233 Motor Mount Adapter 2 CD-0110 CD-0239 CD-0239 CD-0239 CH-6819 Motor 3 D01-0468 D01-0468 D01-0468 D01-0468 D01-0468 Fan Blade 4 FH-1009 FH-1009 FH-1009 FH-1009 FH-1009 Bushing 1 D01-1478 D01-1478 D01-1478 D01-1478 D01-1478 Motor Mount 2 002-1073-2 CH-1050 CH-1050 CH-1050 CH-6820 Motor 3 D82-0002 D82-0002 D82-0002 D82-0002 D82-0002 Fan Blade

220V

1 PH

208V

3 PH

220V 3 PH

440V 3 PH

575V 3 PH

Description

4 FH-1009 FH-6963 FH-6963 FH-6963 FH-6963 Bushing 1 N/A D01-1477 D01-1477 D01-1477 D01-1477 Motor Mount

40" 25 HP

* Not Shown

PNEG-1471 Vision Series Model 2400 Portable Dryer 43

2 N/A C-2049 C-2049 C-2049 CH-6692 Motor 3 N/A D72-0003 D72-0003 D72-0003 D72-0003 Fan Blade 4 N/A CE-00617 CE-00617 CE-00617 CE-00617 Bushing

3. Fan/Heaters

Air Mixer Assemblies

Figure 3D Air Mixer Assemblies (36'' Air mixer shown in photo.)

Air Mixer Assemblies Parts List

Ref # Part # Description 28'' F/H 36'' F/H 40'' F/H

1-2 D01-0955 Air Mixer Assembly, 28" 1

1 D01-0951 Air Mixer Can, 28" x 15" Long 1/Assembly

1a D01-0950 Air Mixer Can, 28" x 8" Short 1/Assembly

2 CD-0228 Small Diameter Can Air Mixer Vane 6/Assembly

1-2 CD-0113 Air Mixer Assembly, 36" 1

1 and 1a D01-1303 Air Mixer Can, 36" with Access 2/Assembly

2 CD-0083 Air Mixer Vane 8/Assembly

1-2 CD-0117 Air Mixer Assembly, 40" 1

1 and 1a D01-1218 Air Mixer Can, 40" with Access 2/Assembly

2 CD-0083 Air Mixer Vane 8/Assembly

44 PNEG-1471 Vision Series Model 2400 Portable Dryer

Flame Probe, Ignitor and Burner Assemblies

Ignitor

Flame probe

Ref #9 and Ref #10 are used in LP Fan/Heaters only.

Burner housing High-Limit switch

28" Fan/Heater burner assembly

3. Fan/Heaters

Figure 3E

Flame Probe, Ignitor and Burner Assemblies Parts List

Ref # Part # Description

2812 3612 3615 4025

10 CD-0414 Vaporizer Coil 26"-28" 3 Wrap 1 10 HF-7207 Vaporizer Coil 36"-42" 10-17 HP 1 1 10 HF-7251 Vaporizer 3/4" 3 Wrap 36"-42" 1 10 HF-7319 Vaporizer Coil (Spiral) 42" 40 HP

Qty

PNEG-1471 Vision Series Model 2400 Portable Dryer 45

Figure 3F

3. Fan/Heaters

40" Fan/Heater burner assembly

36" Fan/Heater burner assembly

Flame Probe, Ignitor and Burner Assemblies (Continued)

Figure 3G

Flame Probe, Ignitor and Burner Assemblies Parts List (See Figure 3E, 3F and 3G)

Ref # Part # Description 28'' F/H 36'' F/H 40'' F/H

1-3 TF-1559-N Flame Probe Assembly Network 1 1 1

1 HH-7025 Boot 8 mm Silicone 90° 1/Assembly 2 THH-4179 Flame Sensor 6" Long Rod 1/Assembly 3 CD-0187 Flame Sensor Bracket 1/Assembly

4-8 TF-1558 Ignitor Assembly 1 1 1

4 HF-7204 Dual Probe Ignitor Bracket 1/Assembly 5 D01-0878 Ignitor Air Deflector Angle 1/Assembly 6 HF-7201 Ignitor Half Clamp 2/Assembly 7 CD-0238 Ignitor Flame 2/Assembly 8 TF-1876 Ignition Wire Assembly (Includes bot h Wires) 1/Assembly 9 HH-7054 Cone 26"/28" Burner S.S. 1

9 HH-7056 Cone 36"/42" Burner S.S. 1 1 10 11 THH-4064 Unilet Type LRL Conduit BX 1/2" 1 1 1

12 027-1006-9 Thermostat - High-limit 200°F Aut 1 1 1 13 D01-1473 Housing High-Limit Plate 1 1 1 14 NO NUMBER Lid for LRL Conduit Box is Part of Ref #11 1/Assembly 15 TFC-0076 Neoprene Gasket, Conduit Body 1 1 1

16-19 BA-28 28" Bu r n er As se m bl y 1

16 HF-7629 Diverter Weldment 28" 1/Assembly 17 THF-3144 Flame Spreader 28" 1/Assembly 18 THF-3141 Heater Gun Machined 28" 1/Assembly 19 THF-3113 28" Diverter Bracket 1/Assembly

20-24 BA-36 36" Burner Assembly 1

20 THF-3038 Diverter Bracket 36" and 40" 3/Assembly 21 THF-3038P Diverter Bracket 36" and 40" Perfed 4/Assembly 22 THF-3039 Diverter Bracket 36" and 40" with Hole 1/Assembly 23 THF-3057 Flame Spreader 36"-42" 1/Assembly

46 PNEG-1471 Vision Series Model 2400 Portable Dryer

24 CD-0091 Burner Weldment Cd 36" and 40" 1/Assembly

25-28 BA-40-2 40" Burner Assembly 1

25 CD-0448P Diverter Bracket 42" Perfed 4/Assembly 26 CD-0448 Diverter Bracket 42" 4/Assembly 27 CD-0208 Burner Weldment CD 42" 1/Assembly 28 THF-3057 Flame Spreader 36"-42" 1/Assembly

See Chart on Page 45

LP Pipe Train Assemblies

28" Fan/Heater LP pipe train assembly

2423

28" Vaporizer coil connection and adjustment brackets

3. Fan/Heaters

Figure 3H

PNEG-1471 Vision Series Model 2400 Portable Dryer 47

3. Fan/Heaters

28" Fan/Heater LP Pipe Train Assemblies Parts List (See Figure 3H)

Ref # Part # Description 28'' Fan/Heater

1 THH-4120 Elbow, 3/4"-90° SCH 40 1 2 THH-4121 Nipple, 3/4" Close SCH 40 2 3 007-1048-3 Ball Valve, 3/4" with Lever Handle 1 4 THH-4125 Nipple, 3/4" x 2" SCH 40 2 5 THH-4154 Tee, 3/4" x 3/4" x 1/4" SCH 40 1 6 HH-2984 Gauge, Pressure 0-30# LP 1 7 THH-4136 Nipple, 3/4" x 3" SCH 40 1 8 056-2223-8 Valve, Solenoid 3/4" NPT 115V Din 1

9 056-2228-7 Valve, Solenoid 3/4" NPT 115V with Bypass 1 10 THH-4066 Elbow, 3/4"-90° Street SCH 40 1 11 THH-4149 Elbow, 3/4"-1/2" - 90° Reducer SCH 40 1 12 HH-2029 Nipple, 1/2" x 1-1/2" SCH 40 2 13 HH-1453 Tee, 1/2" x 1/2" x 1/2" SCH 40 1 14 HH-7013 Switch Screw-in Vaporizer High-Limit 1 15 THH-4071 Elbow, 1/2"-90° SCH 40 1 16 TFC-0023-50 Regulator, 1/2" NPT 50 PSI 1 17 D07-0019 Nipple, 1/2" x 1-1/2" SCH 80 2 18 031-1008-7 Pressure Relief Valve 300 PSI 1 19 HH-4846 Tee, 1/2" x 1/2" x 1/4" SCH 80 1 20 HH-1251 Strainer, 1/2" “Y” SCH 80 1 21 HH-1932 El bow, 1/2"-90° Pipe - 1/2" Flare Brass 1 22 TFC-0095 Hose, 1/2" x 24" LP Gas 2 23 TF-1227 Pipe Train Bracket for 36" and 42" 1 24 326-1047-9 U-Bolt 5/16"-18 x 1-3/8" x 2-3/16" 3 25 401-5503-8 Plumbing Mounting Bracket 1 26 401-5255-5 Plumbing Mounting Base Bracket 1 27 HH-4847 Elbow, 1/2"-90° SCH 80 2 28 D01-2217 Vaporizer Support Plate Black 1 29 410-1783-1-B Vaporizer Adjusting Weldment 1/2" 1

48 PNEG-1471 Vision Series Model 2400 Portable Dryer

LP Pipe Train Assemblies (Continued)

36" Fan/Heater LP pipe train assembly

36" Vaporizer coil connection and adjustment brackets

3. Fan/Heaters

Figure 3I

PNEG-1471 Vision Series Model 2400 Portable Dryer 49

3. Fan/Heaters

Ref # Part # Description 36'' LP F/H

36" Fan/Heater LP Pipe Train Assemblies Parts List (See Figure 3I)

9 056-2228-7 Valve, Solenoid 3/4" NPT 115V with Bypass 1 10 THH-4066 Elbow, 3/4"-90° Street SCH 40 1 11 THH-4149 Elbow, 3/4"-1/2" - 90° Reducer SCH 40 1 12 HH-2029 Nipple, 1/2" x 1-1/2" SCH 40 2 13 HH-1453 Tee, 1/2" x 1/2" x 1/2" SCH 40 1 14 HH-7013 Switch Screw-in Vaporizer High-Limit 1 15 THH-4071 Elbow, 1/2"-90° SCH 40 1 16 TFC-0023-50 Regulator, 1/2" NPT 50 PSI 1 17 D07-0019 Nipple, 1/2" x 1-1/2" SCH 80 2 18 031-1008-7 Pressure Relief Valve 300 PSI 1 19 HH-4846 Tee, 1/2" x 1/2" x 1/4" SCH 80 1 20 HH-1251 Strainer, 1/2" “Y” SCH 80 1 21 HH-1932 Elbow, 1/2"-90° Pipe -1/2" Flare Brass 1 22 TFC-0095 Hose, 1/2" x 24" LP Gas 2 23 TF-1227 Pipe Train Bracket for 36" and 42" 1 24 326-1047-9 U-Bolt 5/16"-18 x 1-3/8" x 2-3/16" 3 25 401-5503-8 Plumbing Mounting Bracket 1 26 401-5255-5 Plumbing Mounting Base Bracket 1 27 HH-4847 Elbow, 1/2"-90° SCH 80 2 28 D01-2217 Vaporizer Support Plate Black 1 29 410-1783-1-B Vaporizer Adjusting Weldment 1/2" 1

50 PNEG-1471 Vision Series Model 2400 Portable Dryer

LP Pipe Train Assemblies (Continued)

40" LP pipe train assemblies

40" and 42" with 25 HP and larger motors vaporizer coil connection and adjustment brackets.

3. Fan/Heaters

Figure 3J

PNEG-1471 Vision Series Model 2400 Portable Dryer 51

3. Fan/Heaters

Ref # Part # Description 40'' LP F/H

10 007-1242-2 Nipple, 1" x 2" SCH 40 1 11 007-1288-5 El bow, 1-1/2" - 90° SCH 40 1 12 HH-2029 Nipple, 1/2" x 1-1/2" SCH 40 2

40" LP Pipe Train Assemblies Parts List (See Figure 3J)

1 THH-4115 Elbow, 1"-90° SCH 40 2 2 007-1104-4 Nipple, Close 1" 4 3 007-1296-8 Ball Valve, 1" With Lever Handle 1 4 007-1106-9 Tee, 1" x 1" x 3/4" 1 5 D07-0027 Reducer, 3/4"-1/4" Hex Bushing 1 6 HH-2984 Pressure Gauge, 0-30# LP 1 7 THH-4037 Nipple, 1" x 2-1/2" SCH 40 1 8 056-2224-6 Valve, Solenoid 1" NPT 115V Din 1 9 056-2230-3 Valve, Solenoid 1" NPT 115V Bypass 1

13 HH-1453 Tee, 1/2" x 1/2" x 1/2" SCH 40 1 14 HH-7013 Switch Screw-in Vaporizer High-Limit 1 15 THH-4071 Elbow, 1/2"-90° SCH 40 1 16 TFC-0023-50 Regulator, 1/2" NPT CSA 50 PSI 1 17 D07-0019 Nipple, 1/2" x 1-1/2" SCH 80 2 18 HH-4846 Tee, 1/2" x 1/2" x 1/4" SCH 80 1 19 031-1008-7 Pressure Relief Valve 300 PSI 1 20 HH-1251 Strainer, 1/2" “Y” SCH 80 1 21 HH-1932 El bow, 1/2"-90° Pipe - 1/2" Flare Brass 1 22 TF-1227 Pipe Train Bracket For 36" and 42" 1 23 326-1047-9 U-Bolt 5/16"-18 x 1-3/8" x 2-3/16" 3 24 401-5503-8 Plumbing Mounting Bracket 1 25 401-5255-5 Plumbing Mounting Base Bracket 1 26 D01-2217 Vaporizer Support Plate Black 1 27 D01-2220 Vaporizer Adjusting Weldment 3/4" 1 28 007-1930-2 Reducer, Bell 3/4"-1/2" SCH 80 2 29 HH-1082 Elbow, 1/2"-90° Street SCH 80 2

52 PNEG-1471 Vision Series Model 2400 Portable Dryer

NG Pipe Train Assemblies

3. Fan/Heaters

Figure 3K 28" Fan/Heater NG Pipe Train Assembly

28" Fan/Heater NG Pipe Train Assemblies Parts List

Ref # Part # Description 28" F/H

1 THH-4149 Elbow, 3/4"-1/2" - 90° Reducer SCH 40 1 2 THH-4121 Nipple, 3/4" Close SCH 40 2 3 007-1048-3 Ball Valve, 3/4" with Lever Handle 1 4 THH-4125 Nipple, 3/4" x 2" SCH 40 2 5 THH-4154 Tee, 3/4" x 3/4" x 1/4" SCH 40 1 6 D08-0022 Gauge, Pressure 0-15# 1 7 THH-4136 Nipple, 3/4" x 3" SCH 40 1 8 056-2223-8 Valve, Solenoid 3/4" NPT 115V Din 1

9 056-2228-7 Valve, Solenoid 3/4" NPT 115V with Bypass 1 10 THH-4066 Elbow, 3/4" x 90° Street SCH 40 1 11 007-1307-3 Elbow, 1-3/4" - 90° Reducer SCH 40 1 12 326-1047-9 U-Bolt 5/16"-18 x 1-3/8" x 2-3/16" 2 13 401-5503-8 Plumbing Mounting Bracket 1 14 401-5255-5 Plumbing Mounting Base Bracket 1

PNEG-1471 Vision Series Model 2400 Portable Dryer 53

3. Fan/Heaters

5 6

NG Pipe Train Assemblies (Continued)

Figure 3L 36" Fan/Heater NG Pipe Train Assembly

36" Fan/Heater NG Pipe Train Assemblies Parts List

Ref # Part # Description 36" F/H

1 007-1307-3 Elbow, 1"-3/4" - 90° 1 2 007-1104-4 Nipple, Close 1" 3 3 007-1296-8 Ball Valve, 1" with Lever Handle 1 4 007-1106-9 Tee, 1" x 1" x 3/4" 1 5 D07-0027 Reducer, 3/4"-1/4" Hex Bushing 1 6 D08-0022 Gauge, Pressure 0-15# 1 7 007-1242-2 Nipple , 1" x 2" SCH 40 2 8 THH-4115 Elbow, 1"-90° SCH 40 1 9 056-2224-6 Valve, Solenoid 1" NPT 115V Din 1

10 056-2230-3 Valve, Solenoid 1" NPT 115V with Bypass 1

11 THH-4164 Elbow, 1"-90° Street SCH 40 1 12 326-1047-9 U-Bolt 5/16"-18 x 1-3/8" x 2-3/16" 2 13 401-5503-8 Plumbing Mounting Bracket 1 14 401-5255-5 Plumbing Mounting Base Bracket 1

54 PNEG-1471 Vision Series Model 2400 Portable Dryer

NG Pipe Train Assemblies (Continued)

5 6

3. Fan/Heaters

Figure 3M 40" Fan/Heater NG Pipe Train Assembly

40" Fan/Heater NG Pipe Train Assemblies Parts List

Ref # Part # Description 40" F/H

1 THH-4115 Elbow, 1"-90° SCH 40 2 2 007-1104-4 Nipple, Close 1" 3 3 007-1296-8 Ball Valve, 1" with Lever Handle 1 4 007-1106-9 Tee, 1" x 1" x 3/4" 1 5 D07-0027 Reducer, 3/4"-1/4" Hex Bushing 1 6 D08-0022 Gauge, Pressure 0-15# 1 7 007-1242-2 Nipple, 1" x 2" SCH 40 2 8 THH-4164 Elbow, 1"-90° Street SCH 40 1

9 056-2224-6 Valve, Solenoid 1" NPT 115V Din 1 10 056-2230-3 Valve, Solenoid 1" NPT 115V with Bypass 1 11 326-1047-9 U -Bolt 5/16"-18 x 1-3/8" x 2-3/16" 2 12 401-5503-8 Plumbing Mounting Bracket 1 13 401-5255-5 Plumbing Mounting Base Bracket 1

PNEG-1471 Vision Series Model 2400 Portable Dryer 55

3. Fan/Heaters

Fan/Heater Orifices

Figure 3N

Liquid Propane Orifices Parts List

Part # Fan/Heater Orifice Size

THF-3241 28" 12 HP 0.25" THF-3242 36" 12 HP 0.2813" CD-0150 36" 15 HP 0.3281" THF-3245 40" 25 HP 0.3594"

Natural Gas Orifices Parts List

Part # Fan/Heater Orifice Size

THF-3140 28" 12 HP 0.375" THF-3243 36" 12 HP 0.4063" THF-3244 36" 15 HP 0.5" THF-3236 40" 25 HP 0.5313"

56 PNEG-1471 Vision Series Model 2400 Portable Dryer

LP Supply Lines (Bottom Module)

3. Fan/Heaters

Figure 3O LP Supply Line (Bottom Module)

PNEG-1471 Vision Series Model 2400 Portable Dryer 57

3. Fan/Heaters

LP Supply Lines (Continued)

Figure 3P LP Supply Line (Top Module)

LP Supply Lines (Bottom and Top Module) Parts List (See Figure 3O and 3P)

Ref # Part # Description Qty

Bottom Module

1 D01-1021 Nipple, 3/4" x 43" SCH 80 1 2 D01-0856 Nipple, 3/4" x 35" SCH 80 1 3 D01-1191 Nipple, 3/4" x 30" SCH 80 1 4 D67-0002 Union 3/4" Female SCH 80 1 5 TFC-0100 Valve, 1/2" NPT SOL LP with Din 2 6 D07-0019 Nipple, 1/2" x 1-1/2" SCH 80 2 7 HH-7036 Tee 3/4" x 3/4" x 1/2" SCH 80 2 8 D67-0007 Plug 3/4" Square 1

9 D28-0001-ELC Valve, 3/4" NPT Elect Shut Off 1 10 D67-0011 Elbow, 3/4"-90° SCH 80 1 11 D67-0021 Nipple, 3/4" Close SCH 80 2 12 007-1647-2 Tee 3/4" x 3/4" x 3/4" SCH 80 1 13 D67-0016 Nipple, 3/4" x 8" SCH 80 1 14 D67-0008 Strnr 3/4" Y 250# WOG 1 15 TFC-0027 Valve, 1/4" NPT 250 PSI Relief 1 16 D07-0027 Reducer 3/4" x 1/4" Hex Bushing 1 17 D07-0024 Plug 1/2" Pipe Solid Black 1

1 D67-0019 Nipple, 3/4" x 42" SCH 80 1

2 D01-1018 Nipple, 3/4" x 64" SCH 80 1 2a D01-0856 Nipple, 3/4" x 35" SCH 80 1

3 D67-0002 Union 3/4" Female SCH 80 1

4 TFC-0027 Valve, 1/4" NPT 250 PSI Relief 1

5 D67-0015 Reducer 3/4"-1/4" Bell SCH 80 1

6 D67-0017 Nipple, 3/4" x 4" SCH 80 1

7 HH-7036 Tee 3/4" x 3/4" x 1/2" SCH 80 1

8 D07-0019 Nipple, 1/2" x 1-1/2" SCH 80 1

9 TFC-0100 Valve, 1/2" NPT SOL LP with Din 1

Top Module

58 PNEG-1471 Vision Series Model 2400 Portable Dryer

NG Supply Lines (Bottom Module)

3. Fan/Heaters

Figure 3Q

PNEG-1471 Vision Series Model 2400 Portable Dryer 59

3. Fan/Heaters

NG Supply Lines (Continued)

Figure 3R NG Supply Line (Top Module)

60 PNEG-1471 Vision Series Model 2400 Portable Dryer

NG Supply Lines Parts List (See Figure 3Q and 3R)

Ref # Part # Description Qty

Bottom Module

1 D68-0021 Nipple, 2-1/2" x 40" SCH 40 1 2 D68-0021 Nipple, 2-1/2" x 40" SCH 40 1 3 707-1677-4 Nipple, 2-1/2" x 27" SCH 40 1 4 D68-0004 Union 2-1/2" Female SCH 40 1 5 D08-0008 Valve, 1-1/2" NPT B-Cock 2 6 D08-0009 Nipple, 1-1/2" Close SCH 40 4 7 D68-0002 Tee 2-1/2" x 2-1/2" x 1-1/2" SCH 40 2 8 D68-0010 Plug 2-1/2" Square SCH 40 1

9 D68-0015-PP Valve, 2-1/2" NPT Elect Shut Off 1 10 D68-0014 Elbow, 2-1/2" - 90° SCH 40 1 11 GT3-0376 Nipple, Close 2-1/2" 1

3. Fan/Heaters

12 707-1679-0 Nipple, 2-1/2" x 12" SCH 40 1 13 D68-0011 Strnr 2-1/2" Y SCH 40 1 14 D08-0011 Elbow, 1-1/2" - 90° SCH 40 2 15 D08-0007 Reducer 1-1/2" x 1" Hex Bushing 2 16 007-1104-4 Nipple, CL 1" 2 17 007-1105-1 Union Fem 1" SCH 40 2 18 033-1007-5 Gas Hose 1" NPT Male Both End 2

Top Module

1 D01-1013 Nipple, 2-1/2" x 45" SCH 40 1

2 D68-0031 Nipple, 2-1/2" x 55" SCH 40 1

3 D68-0004 Union 2-1/2" Female SCH 40 1

4 HH-7090 Nipple, 2-1/2" x 36" SCH 40 1

5 D08-0008 Valve, 1-1/2" NPT B-Cock 2

6 D08-0009 Nipple, 1-1/2" Close SCH 40 4

7 D68-0002 Tee 2-1/2" x 2-1/2" x 1-1/2" SCH 40 2

8 D68-0010 Plug 2-1/2" Square SCH 40 1

9 D08-0011 Elbow, 1-1/2" - 90° SCH 40 2 10 D08-0007 Reducer 1-1/2" x 1" Hex Bushing 2 11 007-1104-4 Nipple, CL 1" 2 12 007-1105-1 Union Fem 1" SCH 40 2 13 033-1007-5 Gas Hose 1" NPT Male Both End 2

PNEG-1471 Vision Series Model 2400 Portable Dryer 61

4. Electrical (Bottom Module)

Right grain High-Limit junction box

Upper plenum High-Limit junction box

Lower plenum High-Limit junction box

Plenum, Right Grain High-Limit Thermostat Operator Light

62 PNEG-1471 Vision Series Model 2400 Portable Dryer

Figure 4A

Left Grain High-Limit Thermostat

Plenum High-Limit conduit (plenum pipe)

Lower grain High-Limit junction box

4. Electrical (Bottom Module)

PNEG-1471 Vision Series Model 2400 Portable Dryer 63

Figure 4B

4. Electrical (Bottom Module)

Plenum High-Limit, Right Grain High-Limit Thermostat Operation Light, Left Grain High-Limit

Thermostat Parts List (See Figures 4A, and 4B)

Ref # Part # Description

1 D03-0117 Lamp 90° with Junction Box

D03-0575 Bulb, 100W 130V Rough Service 2 D03-0057 Conduit 1/2" EMT Metallic 3 FH-6972 Enclosure 4 x 4 x 2-1/2 White PVC 4 D03-0005 Grain Thermostat High-Limit 10' 210°F (for 14' Dryers Only) 4 D03-0378 Grain Thermostat High-Limit 24' 210°F (for Dryers that are 16' and Longer) 5 D01-0254 High-Limit Mounting Bracket 6 D03-0004 Plenum Thermostat 10' 300°F (for 14' Dryers Only) 6 D03-0377 Plenum Thermostat 24' 300°F (for Dryers that are 16' and Longer) 7 FH-7038 Sealtite PVC 3/8" 8 FH-7050 Elbow, 3/8"-90° PVC with Nut 9 FH-7049 Seal 3/8" Straight PVC with Nut

10 D03-0054 Connector 1/2" EMT Compression 11 TFC-0075 Cover Aluminum, Conduit Body 12 HF-7236 Plenum Thermistor Bolt 13 S-968 Nut Flangwz 3/8"-16" ZN Grade 5 14 D03-0375 Conduit Body, LL Type 15 DM60001 Pipe SCH 40-1/2" 16 GT3-0241 Clamp, Beam 1/2" 17 HH-1096 Clamp 1/2" Conduit 18 D03-0060 Connector 3/8" Liquid-Tite To 1/2" EMT

The following components make up the grain High-Limit conduits that run through the grain columns.

The conduit assemblies are not shown in the photos. * D03-0057 Conduit 1/2" EMT metallic * D03-0054 Connector 1/2" EMT compression (2/Conduit; 1 at each end of the dryer) * D33-0002 Coupler 1/2" EMT compression (Couples the lengths of 1/2" EMT)

Enclosure 4 x 4 x 2-1/2 white PVC (As of 2003 a 4 x 4 enclosure has been added

* FH-6972

to these assemblies and is mounted on the rear column end panels into which the grain High-Limit thermostat conduits now terminate.)

* Not Shown

64 PNEG-1471 Vision Series Model 2400 Portable Dryer

4. Electrical (Bottom Module)

Conduit to meter roll speed sensor and rear discharge switch. (See photos below and on Page 66.)

Conduit to meter roll motor. (See photo below.)

Meter roll speed sensor and rear discharge switch conduit. This is a photo of the front section of the conduit that runs through the gussets on the left side of the dryer.

Rear discharge switch conduit at rear left gusset where 1/2" EMT conduit terminates.

Meter roll motor conduit connection

Lower junction box (right)

Coupler for 1/2" EMT conduit

Lower junction box (left)

Lower Junction Box, Meter Roll Motor Conduit and Rear Discharge Conduit

PNEG-1471 Vision Series Model 2400 Portable Dryer 65

Figure 4C

4. Electrical (Bottom Module)

Rear discharge switch conduit at rear lef t gusset

Meter roll speed sensor

Rear discharge switch

(open to show mercury switch)

Lower Junction Box, Meter Roll Motor Conduit and Rear Discharge Conduit (Continued)

Lower Junction Box, Meter Roll Motor Conduit and Rear Discharge Conduit Parts List

Ref # Part # Description

1 FH-7038 Sealtite PVC 3/8 " 2 FH-7049 Connector, 3/8" Straight 3 F-6913 Connector PVC 3/8" 45' with Nut 4 D03-0054 Connector 1/2" EMT Compression 5 D03-0057 Conduit 1/2" EMT Metallic 6 FH-6972 Enclosure 4 x 4 x 2-1/2 With PVC 7 FH-1310 Connector 1/2" 8 WR-182SJOWA Wire 18/2 Type Sjow-A Black

9 FH-7050 Elbow, 3/8"-90° PVC with Nut 10 D03-0060 Connector 3/8" Liquid-Tite To 1/2" EMT 11 D33-0002 Coupler 1/2" EMT Compression 12 D01-0462 Speed Sensor Box Bracket 13 D01-0527 SCR Meter Roll Speed Sensor 14 HH-7046 Disconnect 0.187 Fem 15 D01-0687 Metering Roll Timing Gear Assembly 16 D01-1105 Discharge Switch Mounting Plate 17 TFC-0075 Cover Aluminum, Conduit Body 18 SPD-2098 Clip, Mercury Switch 19 D03-0010 Mercury Switch 20 D03-0375 Conduit Body, LI Type

Figure 4D

(See Figures 4C and 4D)

66 PNEG-1471 Vision Series Model 2400 Portable Dryer

Air Switch Assembly

Air switch assembly (D01-0672)

Air switch assembly (internal parts)

Lower air switch assembly (installed)

1-9

Upper air switch assembly (installed)

4. Electrical (Bottom Module)

Figure 4E

Air Switch Assembly Parts List

Ref # Part # Desciption Qty

1-9 D01-0672 Air Switch Assembly 3/Dryer

1 D01-0671 Air Switch Box Conduit Half 2/Assembly 2 D01-0670 Air Switch Box Face Plate 1/Assembly 3 DC-1103 Decal, Air Pressure Adjustment 1/Assembly 4 D03-0177 Grommet, 11/16" I.D. X 1" O.D. 1/Assembly 5 HF-7227 Coupling, 1/4" Std Black Steel 1/Assembly 6 HF-7228 Bushing, 1/4"-1/8" Hex 1/Assembly 7 HF-7226 Nipple, 1/8" Close 2/Assembly 8 HF-7229 Elbow, 1/8"-90° SCH 40 1/Assembly 9 D03-0167 Air Pressure Switch 1/Assembly

PNEG-1471 Vision Series Model 2400 Portable Dryer 67

Ref # Part # Description

10 FH-7038 Conduit, 3/8" Sealtite

11 FH-7050 Elbow, 3/8"-90° PVC

12 FH-7049 Connector, 3/8" Straight

5. Electrical (Top Module)

Lower junction boxes and air switch

Grain temperature thermistor

Lower junction box (right), with grain High-Limit.

Lower junction box (left), with grain High-Limit.

Air switch assemblies (See Page 67.))

Grain temperature thermistor.Two (2) thermistors are there in each (right and left) grain High-Limit thermostat assemblies.

Lower junction box (right), with grain Hi gh-Limit

Lower junction box

(left), with grain High-Limit

Lower Junction Boxes with Grain High Limit Thermostats

Ref # Part # Description

1 FH-6972 Enclosure 4 x 4 x 2-1/2 White PVC 2 D01-0254 High-limit Mounting Bracket 3 D03-0005 Grain Thermostat High-Limit 10' 210°F (for 14' Dryers Only) 3 D03-0378 Grain Thermostat High-Limit 24' 210°F (for Dryers that are 16' and Longer)

3a D03-0258 Grain Temp Thermistor

4 D03-0054 Connector 1/2" EMT Compression 5 D03-0057 Conduit 1/2" EMT Metallic

* D03-0057 Conduit 1/2" EMT Metallic * D03-0054 Connector 1/2" EMT Compression (2/Conduit; 1 at Each End of the Dryer) * D33-0002 Coupler 1/2" EMT Compression (Couples The Lengths of 1/2" EMT)

* FH-6972

* Not Shown

Lower Junction Boxes with Grain High Limit Thermostats Parts List

The following components make up the grain High-Limit conduits that run through the grain columns.

Enclosure 4 x 4 x 2.5 White PVC (As of 2003 A 4 x 4 Enclosure Has Been Added to these Assemblies and is Mounted on the Rear Column End Panels into which the Grain High-limit Thermostat Conduits now Terminate.)

Figure 5A

The conduit assemblies are not shown in the photos.

68 PNEG-1471 Vision Series Model 2400 Portable Dryer

5. Electrical (Top Module)

Top auger motor conduit

Fill switch assembly

Fill switch assembly (open)

Upper junction box

Plenum High-Limit thermo

Plenum High-Limit conduit (plenum pipe)

Upper Junction Box, Fill Switch Assembly and Plenum High-Limit

PNEG-1471 Vision Series Model 2400 Portable Dryer 69

Figure 5B

5. Electrical (Top Module)

Upper Junction Box, Fill Switch Assembly and Plenum High-Limit Parts List (See Figure 5B)

Ref # Part # Description

1 HH-1096 Clamp 1/2" Conduit 2 D03-0057 Conduit 1/2" EMT Metallic 3 D03-0075 C onnector 1/2" EMT to Sealtite 4 FH-7039 Sealtite PVC 1/2" 5 FH-7052 Elbow, 1/2"-90° PVC With Lock Nut 6 D03-0054 Connector 1/2" EMT Compression 7 FH-6972 Enclosure 4 x 4 x 2-1/2 White PVC 8 FH-1310 Connector 1/2" 9 WR-182SJOWA Wire 18/2 Type Sjow-A Black

10 FH-7051 1/2" Straight PVC with Lock Nut

11 D01-0358 Mounting Plate Weldment, Mercury Box 12 D01-0103 Mercury Switch Shaft 13 D03-0010-DC Mercury Switch 6° 6" Leads 14 SPD-2098 Clip Mercury Switch 15 D03-0004 Plenum Thermostat 10' 300°F (for 14' Dryers Only) 15 D03-0377 Plenum Thermostat 24' 300°F (for Dryers that are 16' and Longer) 16 D01-0254 High-Limit Mounting Bracket 17 FH-7050 Elbow, 3/8"-90° PVC with Nut 18 FH-7038 Sealtite PVC 3/8" 19 F-6913 Connector PVC 3/8" 45' with Nut 20 FH-7049 Connector, 3/8" Straight 21 TFC-0075 Cover Aluminum, Conduit Body 22 HF-7236 Plenum Thermistor Bolt 23 S-968 Nut Flangwz 3/8"-16" ZN Grade 5 24 D03-0375 Conduit Body, LI Type 25 DM60001 Pipe SCH 40-1/2" 26 G T3-0241 Clamp, Beam 1/2"

70 PNEG-1471 Vision Series Model 2400 Portable Dryer

Wire Way Assembly

5. Electrical (Top Module)

Figure 5C

Wire Way Assembly Parts List

Ref # Part # Description Qty

1 D04-0355 Wireway Assembly 2000 Series 1 1a D01-1654 Wireway Cover Section Stack Dryer 4/Assembly 1b D01-1655 Wireway For Sections Stack Dryer 1/Assembly 1c D01-1672 Wireway Top Cap (Solid) 1/Assembly 1d D61-0106 Wireway Bottom Cap 1/Assembly

2 FH-7040 Sealtite PVC 1"

3 FH-7055 Straight PVC with Lock Nut 1"

4 FH-7056 Elbow, Pvc 90° with Lock Nut 1"

5 FH-7052 Elbow, 1/2"-90° PVC With Lock Nut

6 FH-7039 Sealtite PVC 1/2"

PNEG-1471 Vision Series Model 2400 Portable Dryer 71

6. Control Boxes

A detailed view of the heater board

16 9 19

Fan/Heater Control Box

Figure 6A

72 PNEG-1471 Vision Series Model 2400 Portable Dryer

6. Control Boxes

Fan/Heater Control Box Parts List (See Figure 6A)

Ref # Part # Description All Fan/Heaters

* D01-1992 Control Box Lid 1

1 D01-2105 Control Box Back Panel 1 2 D01-2106 Control Left Side 1 3 D01-2107 Control Box Right Side 1 4 D01-2110 Control Box Front Panel 1 5 D03-0696 Control Box Latch 1 6 D01-2108 Control Box Base 1 7 006-1389-3 Nylon Bushing-2" Diameter 1 8 D01-2111 Control Box Wall 1 9 E160-1137 Ground Lug, #TA-2 2

10 HH-1105 Nylon Bushing-11/16" I.D. 3

11 HF-4624 Fenwal Flame Detection Board 1

12 D01-2109 Fenwal Board Bracket 1 13 D01-1981 Mounting Bracket Heater Board 1 14 D01-0730 Touch Control Fan/heater PCB Assembly 1 15 D03-0013 Din Rail Mounting 39.37" Long 0.45 16 D01-0531 Terminal-block Entrelec 4 mm 28 17 D01-0532 Terminal-blank End Protector 11 18 D01-0534 Terminal - Entrelec Ground Block 1 19 D01-0533 Terminal - Entrelec End Stop 8 20 D03-0511 Points, Auxillary for TEC 1 21 See Chart below for Part Numbers 22 See Chart below for Part Numbers 23 E240-1148 Connector 4 Pin 0.200 PCB Plug 2 24 D01-0460 Term Strip 10 Position 1 25 E240-1155 Connector 3 Pin 0.200 PCB Plug 1 26 E240-1154 Connector 5 Pin 0.200 PCB Plug 1

* Not Shown

Ref # Description 10-12 HP Fan Motors (2812, 3612 Fan/heaters)

220V 1 PH 208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

21 Overload D03-0483 D03-0482 D03-0482 D03-0476 D03-0475 22 Contactor D03-0495 D03-0494 D03-0494 D03-0492 D03-0490

10-16 HP Fan Motors (3615 Fan/heaters)

220V 1 PH 208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

21 Overload D03-0485 D03-0483 D03-0483 D03-0477 D03-0478 22 Contactor D03-0497 D03-0494 D03-0494 D03-0492 D03-0491

10-16 HP Fan Motors (4015 Fan/heaters)

220V 1 PH 208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

21 Overload D03-0485 D03-0483 D03-0483 D03-0478 D03-0478 22 Contactor D03-0497 D03-0494 D03-0494 D03-0491 D03-0491

25 HP Fan Motors (4025 Fan/heaters)

220V 1 PH 208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

21 Overload N/A D03-0485 D03-0485 D03-0482 D03-0479 22 Contactor N/A D03-0496 D03-0496 D03-0494 D03-0492

PNEG-1471 Vision Series Model 2400 Portable Dryer 73

6. Control Boxes

Control Box Switch Panel

Figure 6B Vision Control Panel (Front)

Control Box Switch Panel Parts List

Ref # Part # Description

1 111-1001-2 Hinge 1-1/6" x 19 Ga. x 72" SS 2 D01-0447 Switch 3 Position Selector Red 3 D01-0449 Switch 3 Position Selector Blue 4 D01-0579 3 Position Selector Switch Yellow 5 D01-0445 Switch 3 Position Selector Amber 6 D03-0182 Switch 3 Position Selector White 7 D01-0446 Switch 2 Position Selector Green 8 D03-0017 Switch Start N.O. (Illuminated)

9 D03-0020 Switch Stop Block (Red) 10 E115-1060 Knob, Augat #PK-70B-1/4 10 D03-0595 Screen, SCR Digital Encoder 31 Position Push Button High\Low Used On 11 401-5794-2 Switch Mounting Plate 2 Fan 12 DC-1781 Decal, Vision Control 2 Fan 13 TF-1519 Latch, Southco Slotted 14 D03-0746 Touch Control Touch Screen

74 PNEG-1471 Vision Series Model 2400 Portable Dryer

Lower Control Box Back Panel

Emergency stop

switch (outside)

Emergency stop

switch (inside)

6. Control Boxes

Figure 6C

Lower Control Box Back Panel Parts List

Ref # Part # Description Circuit

1 D01-0486 Lower Control Box Back Panel Misc. 2 D03-0742-C Vision Control 12 VDC Power Supply Control 3 D03-0754-C Touch Control 5 VDC Power Supply Control 4 D03-0013 Din Rail, Terminal Block Mounting Misc. 5 D01-0533 Terminal Entrelec End Stop Misc. 6 D01-0534 Terminal Entrelec Ground Block Misc. 7 D01-0531 Terminal Block Entrelec 4 mm Misc. 8 D01-0532 Terminal End Protector Misc.

9 D03-0181 Filter RFI “B” Series Control 10 TF-1279 Emergency Stop Switch Safety 11 DC-1317 Decal, Emergency Stop Misc. 12 D63-0013 Block, Contact N.C. Safety 13 D02-0039 Wire Tie Anchor Misc. 14 D03-0247 Wire Tie, 5" Panduit Misc. 15 D03-0725-C Vision Moisture Control Board Assembly Control

PNEG-1471 Vision Series Model 2400 Portable Dryer 75

6. Control Boxes

Detailed view of a

2 position switch

Vision control panel (rear)

A more detailed parts breakdown of the display and computer is shown on Page 77.

Detailed view of a single

position switch

Control Box Switch Panel (Rear)

Figure 6D

Control Box Switch Panel (Rear) Parts List

Ref # Part # Description Circuit

1 TF-1519 Latch, Southco Slotted Misc. 2 401-5794-4 Switch Mounting Plate 4F Misc. 3 D03-A753 Touch Screen Control Program and Test Control 4 D63-0006 Block, Contact N.O. Control 5 D01-0455 Block, Light 12/24/120V Lamps Control 6 D03-A753TUSB Touch Screen Cable USB MOD 37-1/2" Control 7 D03-0753DB9 Touch Control CBL DB9F to DB9F Control 8 D03-0595 SCR Pot 10K Push Button High\Low Control

76 PNEG-1471 Vision Series Model 2400 Portable Dryer

6. Control Boxes

Vision control computer cover

Vision control computer (cover removed)

Vision Control Computer and Touch Display Assembly

Vision Control Computer and Touch Display Assembly Parts List

Ref # Part # Description Circuit

1 D03-0743 Touch Display 10.4" Display 2 D01-1987 Mounting Bracket Display Misc. 3 D01-1969 Mounting Bracket D03-0723 Board Misc. 4 D03-0723 Touch Control Switch I/O Circuit Board Display 5 D03-0744 Touch Control Display Inverter Display 6 D01-1968 Mounting Bracket, Light Driver Misc. 7 D03-0753TC Touch Controller PCB Display 8 D01-2101 Bracket Touch Screen Driver Misc.

9 D01-0460 Term Strip 10 Position Computer BDS Misc. 10 D03-0340-CBL Cable Assembly Display 11 D03-A753TUSB Touch Screen Cable USB Mod 37-1/2" Display 12 D03-A753 Touch Screen Control Program and Test Control 13 D03-0753CBL Touch Control Display Driver CBL Display 14 D03-0753DB9 Touch Control CBL DB9F to DB9F Display

Figure 6E

PNEG-1471 Vision Series Model 2400 Portable Dryer 77

6. Control Boxes

13 14

8 9

Upper Control Box Panel

Figure 6F Upper Control Box Power Distribution Panel

78 PNEG-1471 Vision Series Model 2400 Portable Dryer

Upper Control Box Panel (Continued)

2414 Upper Control Box Parts List (See Figure 6F)

6. Control Boxes

Ref #

10 D03-0494 D03-0493 D03-0492 D03-0490 D03-0489 Contactor Unload Aux. 11 D01-0531 D01-0531 D01-0531 D01-0531 D01-0531 Terminal Block Entrelec 4 mm Control 12 D01-0532 D01-0532 D01-0532 D01-0532 D01-0532 Terminal Blank End Protector Control 13 D01-0533 D01-0533 D01-0533 D01-0533 D01-0533 Terminal Entrelec End Stop Control 14 D01-0534 D01-0534 D01-0534 D01-0534 D01-0534 Terminal Entrelec Ground Block Control 15 HF-7203 HF-7203 HF-7203 HF-7203 HF-7203 Relay, 3 PDT 120V RH3B-U IDEC Control 16 07097555 070975553 07097555 07097555 07097555 Relay Base, 3 PDT Control 17 FH-3807 FH-3807 FH-3807 FH-3807 FH-3807 Transformer Control 18 D03-0563 D03-0563 D03-0563 D03-0563 D03-0563 Terminal Ground Bar Ground 19 D03-0736-C D03-0736-C D03-0736-C D03-0736-C D03-0736-C Dryer I/O PCB ASM Comp Vision Control 20 D03-0106 D03-0108 D03-0106 D03-0106 D03-0106 SCR Contactor 15 Amp 3 Pole Meter Roll 21 D03-0726 D03-0728 D03-0726 D03-0726 D03-0726 Breaker 3 Amp 2 Pole Delayed Control 22 D03-0660 D03-0660 D03-0660 D03-0660 D03-0660 Breaker 10 Amp 2 Pole Delayed Meter Roll 23 D03-0661 D03-0661 D03-0661 D03-0661 D03-0661 Breaker 6 Amp 1 Pole 110 Control 24 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 SCR Drive Board Base Unit Meter Roll 25 D01-0550 D01-0550 D01-0550 D01-0550 D01-0550 Power Box Catch Angle, Bottom N/A 26 D01-0492 D01-0497 D01-0475 D03-0271 D03-0175 Main Breaker Power 27 D33-0001 D33-0001 D33-0001 D33-0001 D33-0001 SCR Resistor Plug-In 3/4 Hp 180V Meter Roll 28 D03-0464 D03-0461 D03-0461 D03-0545 D03-0395 Breaker Unload Aux. 29 D03-0460 D03-0453 D03-0451 D03-0389 D03-0531 Breaker Unload 30 D03-0464 D03-0461 D03-0461 D03-0545 D03-0395 Breaker Load Aux. 31 D03-0560 D03-0560 D03-0560 D03-0560 D35-0001 Distribution Block Power 32 D03-0460 D03-0453 D03-0451 D03-0389 D03-0531 Breaker Load 33 D03-0510 D03-0461 D03-0461 D03-0546 D03-0532 Breaker Fan 1 34 D03-0510 D03-0461 D03-0461 D03-0546 D03-0532 Breaker Fan 2 35 D03-0510 D03-0461 D03-0461 D03-0546 D03-0532 Breaker Fan 3 36 D03-0510 D03-0461 D03-0461 D03-0546 D03-0532 Breaker Fan 4 37 D01-0551 D01-0551 D01-0551 D01-0551 D01-0551 Power Box Catch Angle, Top N/A

220V 1 PH 208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

1 D01-2087 D01-2087 D01-2087 D01-2087 D01-2087 Power Box Upper Back Panel N/A 2 D01-0480 D01-0480 D01-0480 D01-0480 D01-0480 Power Box Back Panel N/A 3 D03-0478 D03-0477 D03-0475 D03-0473 D03-0472 Overload Load 4 D03-0482 D03-0480 D03-0479 D03-0475 D03-0475 Overload Load Aux. 5 D03-0478 D03-0477 D03-0475 D03-0473 D03-0472 Overload Unload 6 D03-0482 D03-0480 D03-0479 D03-0475 D03-0475 Overload Unload Aux. 7 D03-0492 D03-0491 D03-0490 D03-0488 D03-0488 Contactor Load 8 D03-0494 D03-0493 D03-0492 D03-0490 D03-0489 Contactor Load Aux. 9 D03-0492 D03-0491 D03-0490 D03-0488 D03-0488 Contactor Unload

2414 Part #

Description Circuit

PNEG-1471 Vision Series Model 2400 Portable Dryer 79

6. Control Boxes

Upper Control Box Panel (Continued)

2418 Upper Control Box Parts List (See Figure 6F)

Ref #

1 D01-2087 D01-2087 D01-2087 D01-2087 Power Box Upper Back Panel N/A 2 D01-0480 D01-0480 D01-0480 D01-0480 Power Box Back Panel N/A 3 D03-0477 D03-0475 D03-0473 D03-0472 Overload Load 4 D03-0480 D03-0479 D03-0475 D03-0475 Overload Load Aux. 5 D03-0477 D03-0475 D03-0473 D03-0472 Overload Unload 6 D03-0480 D03-0479 D03-0475 D03-0475 Overload Unload Aux. 7 D03-0491 D03-0490 D03-0488 D03-0488 Contactor Load 8 D03-0493 D03-0492 D03-0490 D03-0489 Contactor Load Aux.

9 D03-0491 D03-0490 D03-0488 D03-0488 Contactor Unload 10 D03-0493 D03-0492 D03-0490 D03-0489 Contactor Unload Aux. 11 D01-0531 D01-0531 D01-0531 D01-0531 Terminal Block Entrelec 4 mm Control 12 D01-0532 D01-0532 D01-0532 D01-0532 Terminal Blank End Protector Control 13 D01-0533 D01-0533 D01-0533 D01-0533 Terminal Entrelec End Stop Control 14 D01-0534 D01-0534 D01-0534 D01-0534 Terminal Entrelec Ground Block Control 15 HF-7203 HF-7203 HF-7203 HF-7203 Relay, 3 PDT 120V RH3B-U IDEC Control 16 070975553 07097555 07097555 07097555 Relay Base, 3 PDT Control 17 FH-3807 FH-3807 FH-3807 FH-3807 Transformer Control 18 D03-0563 D03-0563 D03-0563 D03-0563 Terminal Ground Bar Ground 19 D03-0736-C D03-0736-C D03-0736-C D03-0736-C Dryer I/O PCB ASM Comp Vision Control 20 D03-0106 D03-0108 D03-0106 D03-0106 SCR Contactor 15 Amp 3 Pole Meter Roll 21 D03-0726 D03-0728 D03-0726 D03-0726 Breaker 3 Amp 2 Pole Delayed Control 22 D03-0660 D03-0660 D03-0660 D03-0660 Breaker 10 Amp 2 Pole Delayed Meter Roll 23 D03-0661 D03-0661 D03-0661 D03-0661 Breaker 6 Amp 1 Pole 110 VAC Control 24 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 SCR Drive Board Base Unit Meter Roll 25 D01-0550 D01-0550 D01-0550 D01-0550 Power Box Catch Angle, Bottom N/A 26 D01-0497 D01-0475 D03-0548 D03-0175 Main Breaker Power 27 D33-0001 D33-0001 D33-0001 D33-0001 SCR Resistor Plug-In 3/4 HP 180V Meter Roll 28 D03-0461 D03-0461 D03-0545 D03-0395 Breaker Unload Aux. 29 D03-0453 D03-0451 D03-0389 D03-0531 Breaker Unload 30 D03-0461 D03-0461 D03-0545 D03-0395 Breaker Load Aux. 31 D03-0560 D03-0560 D03-0560 D35-0001 Distribution Block Power 32 D03-0453 D03-0451 D03-0389 D03-0531 Breaker Load 33 D03-0461 D03-0461 D03-0546 D03-0395 Breaker Fan 1 34 D03-0461 D03-0461 D03-0546 D03-0395 Breaker Fan 2 35 D03-0461 D03-0461 D03-0546 D03-0395 Breaker Fan 3 36 D03-0461 D03-0461 D03-0546 D03-0395 Breaker Fan 4 37 D01-0551 D01-0551 D01-0551 D01-0551 Power Box Catch Angle, Top N/A

208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

2418 Part #

Description Circuit

80 PNEG-1471 Vision Series Model 2400 Portable Dryer

Upper Control Box Panel (Continued)

2420 Upper Control Box Parts List (See Figure 6F)

6. Control Boxes

Ref #

208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

1 D01-2087 D01-2087 D01-2087 D01-2087 Power Box Upper Back Panel N/A 2 D01-0480 D01-0480 D01-0480 D01-0480 Power Box Back Panel N/A 3 D03-0479 D03-0477 D03-0474 D03-0473 Overload Load 4 D03-0483 D03-0483 D03-0477 D03-0476 Overload Load Aux. 5 D03-0479 D03-0477 D03-0474 D03-0473 Overload Unload 6 D03-0483 D03-0483 D03-0477 D03-0476 Overload Unload Aux. 7 D03-0492 D03-0491 D03-0489 D03-0489 Contactor Load 8 D03-0494 D03-0494 D03-0492 D03-0490 Contactor Load Aux.

9 D03-0492 D03-0491 D03-0489 D03-0489 Contactor Unload 10 D03-0494 D03-0494 D03-0492 D03-0490 Contactor Unload Aux. 11 D01-0531 D01-0531 D01-0531 D01-0531 Terminal Block Entrelec 4 mm Control 12 D01-0532 D01-0532 D01-0532 D01-0532 Terminal Blank End Protector Control 13 D01-0533 D01-0533 D01-0533 D01-0533 Terminal Entrelec End Stop Control 14 D01-0534 D01-0534 D01-0534 D01-0534 Terminal Entrelec Ground Block Control 15 HF-7203 HF-7203 HF-7203 HF-7203 Relay, 3 PDT 120V RH3B-U IDEC Control 16 070975553 07097555 07097555 07097555 Relay Base, 3 PDT Control 17 FH-3807 FH-3807 FH-3807 FH-3807 Transformer Control 18 D03-0563 D03-0563 D03-0563 D03-0563 Terminal Ground Bar Ground 19 D03-0736-C D03-0736-C D03-0736-C D03-0736-C Dryer I/O PCB Asm Comp Vision Control 20 D03-0106 D03-0108 D03-0106 D03-0106 SCR Contactor 15 Amp 3 Pole Meter Roll 21 D03-0726 D03-0728 D03-0726 D03-0726 Breaker 3 Amp 2 Pole Delayed Control 22 D03-0660 D03-0660 D03-0660 D03-0660 Breaker 10 Amp 2 Pole Delayed Meter Roll 23 D03-0661 D03-0661 D03-0661 D03-0661 Breaker 6 Amp 1 Pole 110 VAC Control 24 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 SCR Drive Board Base Unit Meter Roll 25 D01-0550 D01-0550 D01-0550 D01-0550 Power Box Catch Angle, Bottom N/A 26 D03-0657 D01-0505 D03-0535 D03-0175 Main Breaker Power 27 D33-0001 D33-0001 D33-0001 D33-0001 SCR Resistor Plug-In 3/4 HP 180V Meter Roll 28 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Unload Aux. 29 D03-0459 D03-0457 D03-0582 D03-0531 Breaker Unload 30 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Load Aux. 31 D03-0560 D03-0560 D03-0560 D35-0001 Distribution Block Power 32 D03-0459 D03-0457 D03-0582 D03-0531 Breaker Load 33 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 1 34 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 2 35 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 3 36 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 4 37 D01-0551 D01-0551 D01-0551 D01-0551 Power Box Catch Angle, Top N/A

2420 Part #

Description Circuit

PNEG-1471 Vision Series Model 2400 Portable Dryer 81

6. Control Boxes

Upper Control Box Panel (Continued)

2422 Upper Control Box Parts List (See Figure 6F)

Ref #

10 D03-0494 D03-0494 D03-0492 D03-0490 Contactor Unload Aux.

11 D01-0531 D01-0531 D01-0531 D01-0531 Terminal Block Entrelec 4 mm Control 12 D01-0532 D01-0532 D01-0532 D01-0532 Terminal Blank End Protector Control 13 D01-0533 D01-0533 D01-0533 D01-0533 Terminal Entrelec End Stop Control 14 D01-0534 D01-0534 D01-0534 D01-0534 Terminal Entrelec Ground Block Control 15 HF-7203 HF-7203 HF-7203 HF-7203 Relay, 3 PDT 120V RH3B-U IDEC Control 16 070975553 07097555 07097555 07097555 Relay Base, 3 PDT Control 17 FH-3807 FH-3807 FH-3807 FH-3807 Transformer Control 18 D03-0563 D03-0563 D03-0563 D03-0563 Terminal Ground Bar Ground 19 D03-0736-C D03-0736-C D03-0736-C D03-0736-C Dryer I/o PCB ASM Comp Vision Control 20 D03-0106 D03-0108 D03-0106 D03-0106 SCR Contactor 15 Amp 3 Pole Meter Roll 21 D03-0726 D03-0728 D03-0726 D03-0726 Breaker 3 Amp 2 Pole Delayed Control 22 D03-0660 D03-0660 D03-0660 D03-0660 Breaker 10 Amp 2 Pole Delayed Meter Roll 23 D03-0661 D03-0661 D03-0661 D03-0661 Breaker 6 Amp 1 Pole 110 VAC Control 24 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 SCR Drive Board Base Unit Meter Roll 25 D01-0550 D01-0550 D01-0550 D01-0550 Power Box Catch Angle, Bottom N/A 26 D03-0657 D03-0524 D03-0535 D03-0175 Main Breaker Power 27 D33-0001 D33-0001 D33-0001 D33-0001 SCR Resistor Plug-In 3/4 HP 180V Meter Roll 28 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Unload Aux. 29 D03-0459 D03-0457 D03-0582 D03-0531 Breaker Unload 30 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Load Aux. 31 D03-0560 D03-0560 D03-0560 D35-0001 Distribution Block Power 32 D03-0459 D03-0457 D03-0582 D03-0531 Breaker Load 33 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 1 34 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 2 35 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 3 36 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Fan 4 37 D01-0551 D01-0551 D01-0551 D01-0551 Power Box Catch Angle, Top N/A

208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

2422 Part #

Description Circuit

82 PNEG-1471 Vision Series Model 2400 Portable Dryer

Upper Control Box Panel (Continued)

2426 Upper Control Box Parts List (See Figure 6F)

6. Control Boxes

Ref #

208V 3 PH 220V 3 PH 440V 3 PH 575V 3 PH

1 D01-2087 D01-2087 D01-2087 D01-2087 Power Box Upper Back Panel N/A 2 D01-0480 D01-0480 D01-0480 D01-0480 Power Box Back Panel N/A 3 D03-0480 D03-0479 D03-0475 D03-0475 Overload Load 4 D03-0483 D03-0483 D03-0477 D03-0476 Overload Load Aux. 5 D03-0480 D03-0479 D03-0475 D03-0475 Overload Unload 6 D03-0483 D03-0483 D03-0477 D03-0476 Overload Unload Aux. 7 D03-0493 D03-0492 D03-0490 D03-0489 Contactor Load 8 D03-0494 D03-0494 D03-0492 D03-0490 Contactor Load Aux.

9 D03-0493 D03-0492 D03-0490 D03-0489 Contactor Unload 10 D03-0494 D03-0494 D03-0492 D03-0490 Contactor Unload Aux. 11 D01-0531 D01-0531 D01-0531 D01-0531 Terminal Block Entrelec 4 mm Control 12 D01-0532 D01-0532 D01-0532 D01-0532 Terminal Blank End Protector Control 13 D01-0533 D01-0533 D01-0533 D01-0533 Terminal Entrelec End Stop Control 14 D01-0534 D01-0534 D01-0534 D01-0534 Terminal Entrelec Ground Block Control 15 HF-7203 HF-7203 HF-7203 HF-7203 Relay, 3 PDT 120V RH3B-U IDEC Control 16 070975553 07097555 07097555 07097555 Relay Base, 3 PDT Control 17 FH-3807 FH-3807 FH-3807 FH-3807 Transformer Control 18 D03-0563 D03-0563 D03-0563 D03-0563 Terminal Ground Bar Ground 19 D03-0736-C D03-0736-C D03-0736-C D03-0736-C Dryer I/O PCB ASM Comp Vision Control 20 D03-0106 D03-0108 D03-0106 D03-0106 SCR Contactor 15 Amp 3 Pole Meter Roll 21 D03-0726 D03-0728 D03-0726 D03-0726 Breaker 3 Amp 2 Pole Delayed Control 22 D03-0660 D03-0660 D03-0660 D03-0660 Breaker 10 Amp 2 Pole Delayed Meter Roll 23 D03-0661 D03-0661 D03-0661 D03-0661 Breaker 6 Amp 1 Pole 110 VAC Control 24 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 D03-0104-3/4 SCR Drive Board Base Unit Meter Roll 25 D01-0550 D01-0550 D01-0550 D01-0550 Power Box Catch Angle, Bottom N/A 26 D03-0686 D03-0686 D01-0634 D03-0572 Main Breaker Power 27 D33-0001 D33-0001 D33-0001 D33-0001 SCR Resistor Plug-in 3/4 Hp 180V Meter Roll 28 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Unload Aux. 29 D03-0461 D03-0461 D03-0545 D03-0395 Breaker Unload 30 D03-0468 D03-0465 D03-0529 D03-0532 Breaker Load Aux. 31 D03-0560 D03-0560 D03-0560 D35-0001 Distribution Block Power 32 D03-0461 D03-0461 D03-0545 D03-0395 Breaker Load 33 D03-0144 D03-0467 D03-0547 D03-0141 Breaker Fan 1 34 D03-0144 D03-0467 D03-0547 D03-0141 Breaker Fan 2 35 D03-0144 D03-0467 D03-0547 D03-0141 Breaker Fan 3 36 D03-0144 D03-0467 D03-0547 D03-0141 Breaker Fan 4 37 D01-0551 D01-0551 D01-0551 D01-0551 Power Box Catch Angle, Top N/A

2426 Part #

Description Circuit

PNEG-1471 Vision Series Model 2400 Portable Dryer 83

NOTES

84 PNEG-1471 Vision Series Model 2400 Portable Dryer

7. Warranty

9101239_1_CR_rev7.DOC (revised July 2009)

GSI Group, LLC Limited Warranty

The GSI Group, LLC (“GSI”) warrants products which it manufactures to be free of defects in materials and workmanship under normal usage and conditions for a period of 12 months after sale to the original end-user or if a foreign sale, 14 months from arrival at port of discharge, whichever is earlier. The end-user’s sole remedy (and GSI’s only obligation) is to repair or replace, at GSI’s option and expense, products that in GSI’s judgment, contain a material defect in materials or workmanship. Expenses incurred by or on behalf of the end-user without prior written authorization from the GSI Warranty Group shall be the sole responsibility of the end-user.

Warranty Extensions:

The Limited Warranty period is extended for the following products:

Product Warranty Period

Performer Series Direct Drive Fan Motor 3 Years

AP Fans and Flooring

Cumberland Feeding/Watering Systems

Grain Systems Grain Bin Structural Design 5 Years Grain Systems

Farm Fans Zimmerman

All Fiberglass Housings Lifetime All Fiberglass Propellers Lifetime Feeder System Pan Assemblies 5 Years ** Feed Tubes (1-3/4" and 2.00") 10 Years * Centerless Augers 10 Years * Watering Nipples 10 Years *

Portable and Tower Dryers 2 Years Portable and Tower Dryer Frames and

Internal Infrastructure †

5 Years

* Warranty prorated from list price: 0 to 3 years - no cost to end-user 3 to 5 years - end-user pays 25% 5 to 7 years - end-user pays 50% 7 to 10 years - end-user pays 75% ** Warranty prorated from list price: 0 to 3 years - no cost to end-user 3 to 5 years - end-user pays 50%

† Motors, burner components

and moving parts not included. Portable dryer screens included. Tower dryer screens not included.

GSI further warrants that the portable and tower dryer frame and basket, excluding all auger and auger drive components, shall be free from defects in materials for a period of time beginning on the twelfth (12 and continuing until the sixtieth (60

) month from the date of purchase (extended warranty period). During the extended

) month from the date of purchase

warranty period, GSI will replace the frame or basket components that prove to be defective under normal conditions of use without charge, excluding the labor, transportation, and/or shipping costs incurred in the performance of this extended warranty.

Conditions and Limitations:

THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE LIMITED WARRANTY DESCRIPTION SET FORTH ABOVE. SPECIFICALLY, GSI MAKES NO FURTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE IN CONNECTION WITH: (I) PRODUCT MANUFACTURED OR SOLD BY GSI OR (II) ANY ADVICE, INSTRUCTION, RECOMMENDATION OR SUGGESTION PROVIDED BY AN AGENT, REPRESENTA TIVE OR EMPLOYEE OF GSI REGARDING OR RELATED TO THE CONFIGURATION, INSTALLATION, LAYOUT, SUITABILITY FOR A PARTICULAR PURPOSE, OR DESIGN OF SUCH PRODUCTS.

GSI shall not be liable for any direct, indirect, incidental or consequential damages, including, without limitation, loss of anticipated profits or benefits. The sole and exclusive remedy is set forth in the Limited Warranty, which shall not exceed the amount paid for the product purchased. This warranty is not transferable and applies only to the original end-user. GSI shall have no obligation or responsibility for any representations or warranties made by or on behalf of any dealer, agent or distributor.

GSI assumes no responsibility for claims resulting from construction defects or unauthorized modifications to products which it manufactured. Modifications to products not specifically delineated in the manual accompanying the equipment at initial sale will void the Limited Warranty.

This Limited Warranty shall not extend to products or parts which have been damaged by negligent use, misuse, alteration, accident or which have been improperly/inadequately maintained. This Limited Warranty extends solely to products manufactured by GSI.

Prior to installation, the end-user has the responsibility to comply with federal, state and local codes which apply to the location and installation of products manufactured or sold by GSI.

PNEG-1471 Vision Series Model 2400 Portable Dryer 85

This equipment shall be installed in accordance with

the current installation codes and applicable

regulations, which should be carefully followed in all

cases. Authorities having jurisdiction should be

consulted before installations are made.

GSI Group

1004 E. Illinois St.

Assumption, IL 62510-0020

Phone: 1-217-226-4421

Fax: 1-217-226-4420

www.gsiag.com

CN-302186

GSI PNEG-1471 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

1. Bottom Module

2. Top Module

3. Fan/Heaters

4. Electrical (Bottom Module)

5. Electrical (Top Module)

6. Control Boxes

7. Warranty