GSI PNEG-1363 User Manual

1100 Series Portable Dryer

Parts Manual

PNEG-1363

1100 Series Parts Manual

Table of Contents

1100 SERIES DRYER SPECIFICATIONS......................................................................4

MAIN STRUCTURE ASSEMBLY...................................................................................5

FRAME ASSEMBLY..............................................................................................................................................................5

FRAME, AUGER TROUGH, HOPPER BULKHEADS, AND METERING ROLLS...................................................................8

PLENUM (INSIDE) SCREENS AND METER ROLL UPPER SHIELD.............................................................................12

OUTER SCREENS AND METER ROLL ACCESS DOOR........................................................................................................14

CLEAN OUT DOORS...........................................................................................................................................................16

FRONT AND REAR PLENUM END PANELS AND REAR ACCESS DOORS................................................................18

LADDER AND STEP ASSEMBLIES.........................................................................................................................................20

BOTTOM AUGER...............................................................................................................................................................22

TOP AUGER WITH WET BIN.............................................................................................................................................24

AUGER AND METER ROLL DRIVE TRAINS..............................................................26

BOTTOM AUGER DRIVE..........................................................................................................................................................26

TOP AUGER DRIVE...........................................................................................................................................................28

METER ROLL DRIVE........................................................................................................................................................30

FAN HEATERS.................................................................................................................32

FAN HOUSING ASSEMBLIES.................................................................................................................................................32

FAN MOTOR, MOTOR MOUNT, AND FAN BLADE................................................................................................................34

AIR MIXERS........................................................................................................................................................................35

FLAME PROBE, IGNITOR, AND BURNER ASSEMBLIES..............................................................................................36

LP PIPE TRAIN ASSEMBLIES...........................................................................................................................................38

NG PIPE TRAIN ASSEMBLIES..........................................................................................................................................44

FAN HEATER ORIFICES.....................................................................................................................................................48

LP SUPPLY LINE................................................................................................................................................................49

NG SUPPLY LINE...............................................................................................................................................................50

DRYER ELECTRICAL CONDUITS..................................................................................51

UPPER JUNCTION BOX, TOP AUGER MOTOR CONDUIT, AND OPERATOR LIGHT.......................................................51

RIGHT AND LEFT GRAIN, AND PLENUM HIGH LIMITS..............................................................................................52

LOWER JUNCTION BOXES, METER ROLL MOTOR CONDUIT, AND REAR DISCHARGE CONDUIT..........................54

AIR SWITCH ASSEMBLY...................................................................................................................................................56

CONTROL BOXES..........................................................................................................57

NETWORK CONTROL BOX..............................................................................................................................................57

FAN HEATER CONTROL BOX..........................................................................................................................................58

LOWER CONTROL BOX CONTROL PANEL..................................................................................................................60

LOWER CONTROL BOX CONTROL PANEL (INSIDE)...........................................................................................................61

LOWER CONTROL BOX BACK PANEL...........................................................................................................................62

UPPER CONTROL BOX.....................................................................................................................................................63

NOTES................................................................................................................................73

- 3 -

1100 Series Parts Manual

1100 Series Specifications

MODEL NUMBER

1108 1110 1114 1118 11201112 11221116 1126

Grain Columns

Top Auger (Loading)

Bottom Auger

(Unloading)

Meter Roll Drive

Transport Length

Transport Width

Transport Heigth*

Transport Weight

(Less Transport Kit)

Installed Length

Installed Width

Installed Height

Fan/Heaters

1 Ph

3 Ph

* Shortest possible height shown in ().

14” x 8’ long 14” x 10’ long 14” x 12’ long 14” x 14’ long 14” x 16’ long 14” x 18’ long 14” x 20’ long 14” x 22’ long 14” x 26’ long

8”, 1.5 hp 8”, 2 hp 8”, 2 hp 8”, 3 hp 8”, 5 hp8”, 5 hp 8”, 7.5 hp8”, 7.5 hp 8”, 10 hp

8” x 10” Tube

1 hp

SCR, 1/3 hp

16’-6” 18’-6” 20’-6” 22’-6” 24’-6” 26’-6” 28’-6” 30’-6” 34’-6”

8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’

4,200 lbs.

14’-5” 16’-5”

8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’

13’ 13’ 14’-6” 14’-6” 14’-6” 14’-6” 14’-6” 14’-6” 14’-6”

10-12HP, 28” 10-12HP, 36” 10-17HP, 36” 10-17HP, 40”

10-12HP, 28”

8” x 10” Tube

1.5 hp

SCR, 1/3 hp SCR, 1/3 hp SCR, 3/4 hp SCR, 3/4 hp

5,000 lbs. 6,100 lbs. 7,000 lbs. 7,500 lbs. 8,150 lbs.

10-12HP, 36” 15HP, 36” 15HP, 40”

8” x 10” Tube

1.5 hp

13’-5” (11’-7”)

18’-5”

8” x 10” Tube

3 hp

13’-5” (11’-7”) 13’-5” (11’-7”) 13’-5” (11’-7”)

20’-9” 22’-9” 24’-9” 26’-9” 28’-9” 32’-9”

8” x 10” Tube

5 hp

10-17HP, 40” N/A N/A N/AN/A

15HP, 40” 20HP, 42” 25HP, 42” 30HP, 42” 40HP, 42”

8” x 10” Tube

SCR, 3/4 hp

5 hp

8” x 10” Tube

7.5 hp

SCR, 3/4 hp SCR, 3/4 hp SCR, 3/4 hp

13’-5” (11’-7”)

9,200 lbs.

8” x 10” Tube

7.5 hp

13’-5” (11’-7”) 13’-5” (11’-7”)11’-6” (10’-1”) 11’-6” (10’-1”)

9,900 lbs. 12,100 lbs.

8” x 10” Tube

10 hp

- 4 -

1100 Series Parts Manual

Frame

53

3

553

4a

3

5

4

Frame Assembly (view from fan/heater end with hitch weldment removed).

**NOTE: The parts pointed out on this page are listed on page 7.

- 5 -

Right side Left side

21a

1

The fan heater end of the dryer is considered by GSI as the front end of the dryer (the

foreground of this photograph is the front end. Right and left sides are labeled above).

1100 Series Parts Manual

Right front corner of frame.

3

1

1a

Frame

**NOTE: The right front corner
is shown in the photo. For left
front corner all parts are the
same except for the Hitch
Bracket (use 1a for the left side),
and the Frame Rail (use 4a for
the left side).

2

Left rear corner of frame.

3

4a

4

5

**NOTE: The left rear corner is
shown in the photo. For right
rear corner all parts are the same

2

4a

4

except for the Frame Rail (use 4
for the right side).

- 6 -

Center cross ties.

1100 Series Parts Manual

Frame

3

5

4a

4

2

ITEM

NUMBER PART NUMBER

1 D01-0012 HITCH BRACKET RIGHT 111111111

1a D01-0011 HITCH BRACKET LEFT 111111111

2 D01-0008 FRONT & REAR FRAME TIE CHANNEL 224444466
3 D01-0007 CORNER LEG PORTABLE DRYER 446666688
4 D11-0005 FRAME RAIL, 8' RIGHT 1

4a D11-0004 FRAME RAIL, 8' LEFT 1

4 D01-0010 FRAME RAIL, 10' RIGHT 1

4a D01-0009 FRAME RAIL, 10' LEFT 1

4 D51-0002 FRAME RAIL, 12' RIGHT 1

4a D51-0001 FRAME RAIL, 12' LEFT 1

4 D21-0011 FRAME RAIL, 14' RIGHT 1

4a D21-0010 FRAME RAIL, 14' LEFT 1

4 D01-0538 FRAME RAIL, 16' RIGHT 1

4a D01-0537 FRAME RAIL, 16' LEFT 1

4 D31-0044 FRAME RAIL, 18' RIGHT 1

4a D31-0043 FRAME RAIL, 18' LEFT 1

4 D61-0002 FRAME RAIL, 20' RIGHT 1

4a D61-0001 FRAME RAIL, 20' LEFT 1

4 D101-0002 FRAME RAIL, 22' RIGHT 1

4a D101-0001 FRAME RAIL, 22' LEFT 1

4 D71-0001 FRAME RAIL, 26' RIGHT 1

4a D71-0002 FRAME RAIL, 26' LEFT 1

5 D01-0005 SIDE LEG PORTABLE DRYER 6 8 8 10 12 14 16 16 20

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

- 7 -

1100 Series Parts Manual

Frame, Auger Trough, & Hopper Bulkheads

6

4

9

5

Dryer frame and lower basket assembly (view from the

front end of the dryer looking down the left side).

1

3

56 4

2

8 116

9 10

7

L.H. and R.H.

the plenum closure

distinguish between

door angles. This will

Note the hole pattern of

**NOTE: The parts pointed out on this page are listed on page 11.

- 8 -

1100 Series Parts Manual

Frame, Auger Trough, & Hopper Bulkheads

assembly.

shaft (part no. D31-0046) that

together with a meter roll splice

The meter roll sections are spliced

Wooden meter roll support bearing.

passes through the support bearing

181716

9

21

6

4

19

20

Discharge bearing plate.

3

6

Center hanger bearing support

and cross channel seal plate.

9

12

5

11a

12

3

9 6

4

12 13 12 14 15 3

6

**NOTE: The parts pointed out on this page are listed on page 11.

- 9 -

Dryer frame and lower basket assembly (view from the

rear end of the dryer looking up the right side).

Meter Rolls and Their Placement in the Dryer

Metering Rolls and their placement in the dryer.

NOTE: Item 22 at the rear of
dryer is a front section meter

roll that is used as a rear section

on 16 and 20 foot dryers only.

1100 Series Parts Manual

22

24

Meter Roll Bearing

See pg. 11

Items 16, 17, 18

23

23

23 23

Meter Roll Bearing

Items 16, 17, 18

Meter Roll Bearing

See pg. 11

Items 16, 17, 18

See pg. 11

22

22

This end is the front (fan/heater) end of the dryer.

- 10 -

1100 Series Parts Manual

Meter Rolls and Their Placement in the Dryer

ITEM

NUMBER PART NUMBER

1 D01-1136YPLENUM CLOSURE DOOR ANGLE, RH 34567891012
2 D01-1136XPLENUM CLOSURE DOOR ANGLE, LH 456789101113
3 D01-0109 HOPPER BULKHEAD 6 8 10 12 14 16 18 20 24
4 D01-0004 GUSSET PLATE 10 12 14 16 18 20 22 24 28
5 D01-0005 SIDE LEG 6 8 8 10 12 14 16 16 20
6 D01-0007CORNER LEG 446666688
7 D01-0011HITCH BRACKET, LH 111111111
8 D01-0012HITCH BRACKET, RH 111111111

9 D01-0008FRONT & REAR FRAME TIE CHANNEL 224444466
10 D01-1374BOTTOM AUGER BEARING PLATE 111111111
11 D11-0005 FRAME RAIL, 8' RIGHT 1
11 D01-0010 FRAME RAIL, 10' RIGHT 1
11 D51-0002 FRAME RAIL, 12' RIGHT 1
11 D21-0011 FRAME RAIL, 14' RIGHT 1
11 D01-0538 FRAME RAIL, 16' RIGHT 1
11 D31-0044 FRAME RAIL, 18' RIGHT 1
11 D61-0002 FRAME RAIL, 20' RIGHT 1
11 D101-0002 FRAME RAIL, 22' RIGHT 1
11 D71-0001 FRAME RAIL, 26' RIGHT 1

11A D11-0004 FRAME RAIL, 8' LEFT 1
11A D01-0009 FRAME RAIL, 10' LEFT 1
11A D51-0001 FRAME RAIL, 12' LEFT 1
11A D21-0010 FRAME RAIL, 14' LEFT 1
11A D01-0537 FRAME RAIL, 16' LEFT 1
11A D31-0043 FRAME RAIL, 18' LEFT 1
11A D61-0001 FRAME RAIL, 20' LEFT 1
11A D101-0001 FRAME RAIL, 22' LEFT 1
11A D71-0002 FRAME RAIL, 26' LEFT 1

12 D01-0048 TROUGH PANEL 8 10 12 14 16 18 20 22 26
13 D01-1512PLATE, CROSS CHANNEL SEAL W/TABS N/AN/A1111122
14 D01-1291HANGER BEARING "C" CHANNEL N/AN/A1111122
15 D01-1290HANGER BEARING "J" PLATE N/AN/A2222244
16 D02-0028 CLEVIS PIN 5/16" x 1 3/4" 16 24 24 32 32 40 40 48 56
17 D31-0148 METER ROLL WASHER 8 12 12 16 16 20 20 24 28
18 D02-0061METER ROLL SUPPORT BEARING 24466881012
19 D01-0177SUPPORT STRAP 456789101113
20 D01-1511PLATE, END CHANNEL SEAL W/TAB 222222222
21 D31-0120DISCHARGE PLATE 111111111
22 D31-0031METER ROLL, FRONT 424242422
23 D31-0030METER ROLL, INTERMEDIATE 224466810
24 D31-0029 METER ROLL, REAR 2 2 2 2 2

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

The part number list above covers all parts pointed out on pages 8, 9, and 10.

- 11 -

1100 Series Parts Manual

Inside (Plenum) Screens, Plenum Closure Doors

Plenum screens and bulkheads (view from front end).

3

4

3

5

12

5

6

16

7

8

10

11

13

14

18

19

12

9

10

7

15

This photograph was taken before the front

plenum end panel and outer screens where

installed in order to get a good view of the inside

20

20a

screens and bulkheads.

22

21

Plenum closure door. There are two different plenum closure doors. The door
shown in the photogragh is the rear plenum closure door and is the rear most
plenum closure door, item no. 20 (just inside the rear access door), all others
are item no. 20a. NOTE: Item 22 is the plenum closure door rear frame angle.

- 12 -

1100 Series Parts Manual

Meter Roll Upper Shield Assembly

Close up of of meter roll upper shield assembly.

19

18

17

16

17

18

19

ITEM

NUMBER PART NUMBER

1 D01-0110

1 D31-0055 COLUMN BULK HEAD N/A N/A 10 12 14 16 18 20 24
2 D01-0101 GARNER BULKHEAD 6 8 10 12 14 16 18 20 24
3 D01-0121 COLUMN END PANEL-LOW PRO 4 4 N/A N/A N/A N/A N/A N/A N/A
3 D31-0307 COLUMN END PANEL N/A N/A 4 4 4 4 4 4 4
4 D01-0126 SCREEN,PLENUM TOP,GA,094 8 10 12 14 16 18 20 22 26
5 D01-0125 SCREEN,PLENUM WALL,GA,094 8 10 N/A N/A N/A N/A N/A N/A N/A
5 D31-0012 SCREEN,PLENUM WALL,GA,094 N/A N/A 12 14 16 18 20 22 26
6 D01-1225 SCREEN,PLENUM BOTTOM,GA,094 8 10 12 14 16 18 20 22 26
7 D01-0004 GUSSET PLATE 10 12 14 16 18 20 22 24 28
8 D11-0005 FRAME RAIL, 8' RIGHT 1
8 D01-0010 FRAME RAIL, 10' RIGHT 1
8 D51-0002 FRAME RAIL, 12' RIGHT 1
8 D21-0011 FRAME RAIL, 14' RIGHT 1
8 D01-0538 FRAME RAIL, 16' RIGHT 1
8 D31-0044 FRAME RAIL, 18' RIGHT 1
8 D61-0002 FRAME RAIL, 20' RIGHT 1
8 D101-0002 FRAME RAIL, 22' RIGHT 1
8 D71-0001 FRAME RAIL, 26' RIGHT 1
9 D11-0004 FRAME RAIL, 8' LEFT 1
9 D01-0009 FRAME RAIL, 10' LEFT 1
9 D51-0001 FRAME RAIL, 12' LEFT 1
9 D21-0010 FRAME RAIL, 14' LEFT 1
9 D01-0537 FRAME RAIL, 16' LEFT 1
9 D31-0043 FRAME RAIL, 18' LEFT 1
9 D61-0001 FRAME RAIL, 20' LEFT 1
9 D101-0001 FRAME RAIL, 22' LEFT 1

9 D71-0002 FRAME RAIL, 26' LEFT 1
10 D01-0007 CORNER LEG PORTABLE DRYER 4 4 6 6 6 6 6 8 8
11 D01-0012 HITCH BRACKET RIGHT 1 1 1 1 1 1 1 1 1
12 D01-0011 HITCH BRACKET LEFT 1 1 1 1 1 1 1 1 1
13 D01-0008 FRONT & REAR FRAME TIE CHANNEL 2 2 4 4 4 4 4 6 6
14 D01-1374 BOTTOM AUGER BEARING PLATE 1 1 1 1 1 1 1 1 1
15 D01-0005 SIDE LEG PORTABLE DRYER 6 8 8 10 12 14 16 16 20
16 D01-0109 HOPPER BULKHEAD 6 8 10 12 14 16 18 20 24
17 D01-0050 CONNECTOR SHEET 8 10 12 14 16 18 20 22 26

*18&19 D01-1180 METER ROLL UPPER SHIELD ASSY. 8 10 12 14 16 18 20 22 26

18 D01-0431 METER ROLL STRIKE OFF PLATE

19 D01-1226 METER ROLL SHIELD 1995 STYLE

COLUMN BULK HEAD 6 8 N/A N/A N/A N/A N/A N/A N/A

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

1 PER ASSEMBLY

1 PER ASSEMBLY

*ITEM NUMBERS 18 AND 19 TOGETHER MAKE UP THE METER ROLL UPPER SHIELD ASSEMBLY

- 13 -

1100 Series Parts Manual

Outer screens (view from front end).

2

Outer Screens

*

3

*

3a

4

*

3

2

3

3a

4

5

1

*Note: Item 3 is pointing to the

top edge angle gusset. There are

two types of gusset on the dryer.

The photo above will help

distinguish the difference

between the two. The arrows are

pointing to a tab on the gusset

9

10

that makes them different (tabs

are “bent” up in photo). Item 3a

is used in two places only; 1.)

front right of dryer 2.) rear left

of dryer, all others are item 3.

6

12

7

13

14

8

9

10

11

See

Photograph

on page 15.

- 14 -

17

1100 Series Parts Manual

Meter Roll Access Doors

Meter roll access door.

15

16

18

19

20

ITEM

NUMBER

1 D01-0121

1 D31-0307 COLUMN END PANEL 4 4 4 4 4 4 4
2 D01-0113 WALK RAIL MOUNTING BRACKET 10 12 16 18 20 22 24 28 32

3 D01-0152 TOP EDGE ANGLE GUSSET - LH 8 10 12 14 16 18 20 22 26

3a D01-0153 TOP EDGE ANGLE GUSSET - RH 2 2 2 2 2 2 2 2 2

4 D01-0127 SCREEN, ROOF SHEET 8 10 12 14 16 18 20 22 26
5 D01-0130 SCREEN, OUTSIDE WALL SHEET LO PRO 8 10
5 D31-0013 SCREEN, OUTSIDE WALL SHEET 12 14 16 18 20 22 26
6 D01-0128 SCREEN, HOPPER SHEET 8 10 12 14 16 18 20 22 26
7 D11-0005 FRAME RAIL, 8' RIGHT 1
7 D01-0010 FRAME RAIL, 10' RIGHT 1
7 D51-0002 FRAME RAIL, 12' RIGHT 1
7 D21-0011 FRAME RAIL, 14' RIGHT 1
7 D01-0538 FRAME RAIL, 16' RIGHT 1
7 D31-0044 FRAME RAIL, 18' RIGHT 1
7 D61-0002 FRAME RAIL, 20' RIGHT 1
7 D101-0002 FRAME RAIL, 22' RIGHT 1
7 D71-0001 FRAME RAIL, 26' RIGHT 1
8 D01-0005 SIDE LEG PORTABLE DRYER 6 8 8 10 12 14 16 16 20
9 D01-0004 GUSSET PLATE 10 12 14 16 18 20 22 24 28

10 D01-0007 CORNER LEG PORTABLE DRYER 4 4 6 6 6 6 6 8 8
11 D01-0012 HITCH BRACKET RIGHT 1 1 1 1 1 1 1 1 1
12 D01-0011 HITCH BRACKET LEFT 1 1 1 1 1 1 1 1 1
13 D01-0008 FRONT & REAR FRAME TIE CHANNEL 2 2 4 4 4 4 4 6 6
14 D01-1374 BOTTOM AUGER BEARING PLATE 1 1 1 1 1 1 1 1 1
15 D01-0050 CONNECTOR SHEET 8 10 12 14 16 18 20 22 26
16 D01-0045 ACCESS DOOR 8 10 12 14 16 18 20 22 26
17 D01-0039 DOOR LATCH 16 20 24 28 32 36 40 44 52
18 S-6552 PIN, HAIR CLIP 3/32" 16 20 24 28 32 36 40 44 52
19 DC-1229 DECAL, WARNING METER ROLL ROT. 8 10 12 14 16 18 20 22 26
20 D01-0048 TROUGH PANEL WELDMENT 8 10 12 14 16 18 20 22 26

PART

NUMBER

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

COLUMN END PANEL low profile 4 4

- 15 -

1100 Series Parts Manual

Clean Out Doors

Front and rear handle mechanisms (rear shown in photo).

1

3

2

4

5

13

*Note: Items 9, 10, & 11 together create the
clean out door assembly. There are three
different clean out door assemblies that are used
on GSI Network dryers:

1.) 3 column clean out door assy. (D51-0077).
Item 8a on the part no. listing (pg 21).

2.) 4 column clean out door assy. (D11-0032).
Item 8b on the part no. listing (pg 21).

3.) 5 column clean out door assy. (D01-0349).
Item 8c on the part no. listing (pg 21).

A 5 column clean out door assy (D01-0349) is
shown in the photograph below.

11

Clean out door handle mechanism.

4

3a

3

2

Clean out door hinge.

5

9

6

7

11

10

9

10

12

11

13

11

- 16 -

1100 Series Parts Manual

Clean Out Doors

Center handle mechanisms (this handle mechanism stradles the center cross channels).

14

3a

1a

14

3a 11

4

2

5

14

ITEM

NUMBER PART NUMBER

1 D01-0264 PIVOT ROD 25.188" 2 2 2 2 2 2 2 2 2

1a D31-0162 PIVOT ROD 49.625" 1 1 1 1 1 2 2

2 D01-0296 LINKAGE BAR WELDMENT 2 2 4 4 4 4 4 6 6

3 D01-0261 LINKAGE BAR, 37" LONG 2 2 2 2 2 2 2 2 2

3a D01-0293 LINKAGE BAR, 30" LONG 2 2 2 2 2 4 4

4 D01-0294 CLEAN OUT DOOR HANDLE 2 2 4 4 4 4 4 6 6

5 S-4378 PLASTIC GRIP 2 2 4 4 4 4 4 6 6

6 S-248 WASHER, FLAT 3/8 USS ZN 4 4 8 8 8 8 8 12 12

7 S-7241 COTTER PIN, 1/8 x 1 1/4 4 4 8 8 8 8 8 12 12

8a D51-0077 CLEAN OUT DOOR ASSY, 3 COLUMN 2 1 1

9 D21-0005 CLEAN OUT DOOR, 67"

10 D21-0012 SUPPORT CHANNEL, CLEAN OUT DOOR

11 D01-0308 CLEAN OUT DOOR HINGE

8b D11-0032 CLEAN OUT DOOR ASSY, 4 COLUMN 1 1 2 1 2 2

9 D31-0021 CLEAN OUT DOOR, 91"

10 D31-0130 SUPPORT CHANNEL, CLEAN OUT DOOR
11 D01-0308 CLEAN OUT DOOR HINGE

8c D01-0349 CLEAN OUT DOOR ASSY, 5 COLUMN 1 1 2 1

9 D01-0180 CLEAN OUT DOOR, 115"

10 D01-0307 SUPPORT CHANNEL, CLEAN OUT DOOR
11 D01-0308 CLEAN OUT DOOR HINGE

12 D01-0175 HINGE BRACKET 2 3 4 4 5 5 6 6 7
13 D01-0181 CLEAN OUT EXTENSION, 119.75" 2 2 4 2
13 D31-0023 CLEAN OUT EXTENSION, 90.75" 2 2 4 2 4 4
13 D21-0006 CLEAN OUT EXTENSION, 66.75" 4 2 2
14 D01-0299 PIVOT ROD BRACKET 3 3 3 3 3 6 6

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

1 PER ASSEMBLY

1 PER ASSEMBLY

2 PER ASSEMBLY

1 PER ASSEMBLY

1 PER ASSEMBLY

2 PER ASSEMBLY

1 PER ASSEMBLY

1 PER ASSEMBLY

3 PER ASSEMBLY

- 17 -

Rear end panels.

1 32

1100 Series Parts Manual

Front & Rear Plenum End Panels

1

Aspirator end cap.

11

12

3

10

1

5

6

Front end panels & support arms.

3 1

4

- 18 -

9

7

8

15

16

13

Rear access door.

1100 Series Parts Manual

Rear Access Doors

Rear access door (inside).

15

16

20

21

14

21

19

16

20

17 18

16 17

ITEM

NUMBER PART NUMBER

1 D01-0121
1 D31-0307COLUMN END PANELS 4444444
2 D01-1844-Y REAR PANEL LOW PRO 1 29" DOOR 1 1
2 D01-1780-YREAR END PANEL 1 29" DOOR 1111111
3 D01-0044TOP ANGLE BRKT FRONT & REAR 333333333
4 D01-0102 FRONT END PANEL 28 LO-PRO 1
4 D01-0346 FRONT END PANEL 36 LO PRO 1
4 D51-0004 FRONT END PANEL 1-36" 1
4 D01-1459 FRONT END PANEL 1-40" 1 1
4 D51-0131 FRONT END PANEL 1-42" 1 1 1 1
5 D51-0022SUPPORT, CONTROL PANEL 333333333
6 D01-0663 FRONT FAN SUPPORT 1-28" 1
6 D51-0007 FRONT FAN SUPPORT 1-36" 1 1
6 D01-1458 FRONT FAN SUPPORT 1-40" 1 1
6 D51-0132 FRONT FAN SUPPORT 1-42" 1 1 1 1
7 D51-0021STIFFENER, FRONT FAN SUPPORT 222222222
8 D01-0062FRONT DIAGONAL SUPPORT CHANNEL 222222222

9 D31-0129DIAGONAL SUPPORT ANGLE 222222222
10 D01-0481-MSREAR DISCHARGE BOX ASSEMBLY 111111111
11 D01-1510ASPIRATOR END CAP 111111111
12 DC-974DECAL, DANGER FOOT IN AUGER 111111111
13 D03-0512DOOR HANDLE LOCKING 111111111
14 DC-973DECAL, DANGER FIRE HAZARD 111111111
15 D01-1783-YASSIST HANDLE, 29" SQ. DOOR 222222222
16D01-1782-BLKFRAME ANGLE, 29" SQ. DOOR 444444444
17 D01-1781-YDOOR, 29" SQUARE 111111111
21 D01-1792LATCH BAR 111111111
22 D01-0397LATCH BRACKET 111111111
23 401-4669-8REAR ACC. DOOR HINGE, DOOR HALF 222222222
24 401-4630-0HINGE BRACKET 222222222

COLUMN END PANEL-LOW PRO 4 4

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

- 19 -

1100 Series Parts Manual

Fan Access Step

6

5

1 2 43

7

8

ITEM

NUMBER

1-4 D01-1198

1 D01-1168
2 D01-1166 FAN ACCESS STEP
3 D51-0022 SUPPORT, CONTROL PANEL
4 D01-1167 FAN ACCESS STEP RH MOUNT

5
6
7
8 D51-0021 STIFFENER, FRONT FAN SUPPORT 2 2 2 2 2 2 2 2 2

PART

NUMBER

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

FAN ACCESS STEP KIT 1 1 1 1 1 1 1 1 1

FAN ACCESS STEP LH MOUNT

1/KIT
1/KIT
1/KIT

1/KIT
SEE ITEM 5 ON PAGE 21
SEE ITEM 6 ON PAGE 21
SEE ITEM 7 ON PAGE 21

- 20 -

1100 Series Parts Manual

Ladder Assemblies

Front and rear ladder assembly.

1

2

3

1

3

2

1

5

1

6

7

3

4

ITEM

NUMBER

1-4 D04-0120

1
2 D 01-0111
3
4

1-4 D31-0293

1 D01-1012 LADDER BRACKET
2 D31-0020 LADDER RAIL
3 D01-0112 LADDER RUNG

4 D01-0114 LADDER LOWER BRACKET

5 CD-0576 GRILL GUARD: CD -28 1
5 CD-0544 GRILL GUARD: 36 " 1 1
5 CD-0547GRILL GUARD: 40&42" 111111
6 F-7060-Y VENTURI: 28" YEL/OCHRE 1
6 CD-0543-Y VENTURI: 36" OCHRE 1 1
6 CD-0545-Y VENTURI: 40" OCHRE 1 1
6 CD-0546-Y VENTURI: 42" OCHRE 1111
7 D 01-0663 FRONT FAN SUPPORT 1-28" 1
7 D 51-0007 FRONT FAN SUPPORT 1-36" 1 1
7 D 01-1458 FRONT FAN SUPPORT 1-40" 1 1
7 D 51-0132 FRONT FAN SUPPORT 1-42" 1 1 1 1

PART

NUMBER

LADDER ASSEMBLY SHORT PROFILE 1 1

D01-1012 LADDER BRACKET

LADDER RAIL

D01-0112 LADDER RUNG

D01-0114 LADDER LOWER BRACKET

LADDER ASSEMBLY, TALL PROFILE 1222222

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

4/ASSEMBLY
2/ASSEMBLY
8/ASSEMBLY

1/ASSEMBLY

4 PER ASSEMBLY
2 PER ASSEMBLY

10 PER ASSEMBLY

1 PER ASSEMBLY

- 21 -

1100 Series Parts Manual

Bottom Auger (view from center of dryer to
the forward end).

Bottom Auger

Bottom Auger (view from center of dryer to
the rear end).

1

2

2

3

2

4

Bottom Auger center bearing and support. Bottom Auger rear bearing.

- 22 -

8 75 7 6

1100 Series Parts Manual

Bottom Auger

Rear Discharge Box. Auger bearing.

18 19

17

20

9

10

16

11

12

ITEM

NUMBER PART NUMBER

1 D01-1214 PLENUM CLOSURE DOOR, REAR 1 11111111
2 D01-1134 PLENUM CLOSURE DOOR 3 4567891012
3 D01-1819 BOTTOM AUGER 8' 1
3 D01-1821 AUGER BTM 10' 1
3 D21-0017 AUGER BTM FRONT 1 1 1
3 D01-0607 AUGER BTM FRONT 1
3 D31-0092 AUGER BTM FRONT 1 1
3 D31-0092 AUGER BTM FRONT (116 3/8" LONG) 1
4 D01-0801 AUGER BTM REAR 12' 1
4 D31-0267 AUGER BTM REAR 1 1 1 2 2
4 D61-0184 AUGER BTM REAR(117 7/8" LONG) 1
5 D01-1290 HANGER BEARING BOTTOM J-PLATE 2222244
6 D01-1291 HANGER BEARING BOTTOM C-CHANNEL 1111122
7 D01-1246 HANGER BEARING ASSEMBLY (SHORT) 2222233
8 D31-0076 SHAFT, AUGER SPLICE 2222233

9-19 D01-0481-MS DISCHARGE BOX ASSEMBLY 1 11111111

9 D01-1884 DISCHARGE WELDMENT
10 D01-1886 MOIST. SAMPLER TUBE COVER PLATE
11 D01-0405 GRAIN SAMPLER ASSEMBLY
12 D01-1752 DISCHARGE SIDE COVER
13 D01-1751 DISCHARGE SICE PANEL MC
14 D31-0298 DISCHARGE SIDE PANEL
15 D01-1885 MOIST. SAMPLER COVER PLATE
16 D01-1650 REAR AUGER BEARING SHIELD
17 D31-0299 DISCHARGE BOX BEARING PLATE
18 D01-0466 DISCHARGE TOP PANEL
19 D01-0467 DISCHARGE TOP FLAPPER
20 D32-0001 FLANGETTE BEARING 1 11111111
21 D31-0005 SHAFT, TOP &BOT AUGER STUB 1 11111111

NOT SHOWN D31-0079 DISCHARGE AUGER WELDMENT 1 11111111

13 14 15

DESCRIPTION 1108 1110 1112 1114 1116 1118 1120 1122 1126

21

1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY
1/ASSEMBLY

- 23 -