Page 1
Detailed instruction manual
You can find the detailed
instructions at www.grundig.de
under “support”.
Table of Contents
2 EU directives
3 About your TV set
3 Intended use
3 Safety
5 Packing contents
6 Setting up or hanging
7 Connections
7 Control elements
8 Inserting batteries into the remote
control
8 Setting up the TV set
8 Adding new TV stations at a later
point
8 Sorting TV stations in the channel list
9 Smart remote controller
10 Pairing the Smart remote controller
11 Amazon Alexa
11 Favourites lists
11 Zapping function
11 HbbTV
12 Recording from digital TV stations
12 Watching TV with time shift
13 Media player
13 Opening Application Center
13 Web browser
14 Product data sheet
15 Licence
15 Network interfaces
15 Cleaning the TV set
15 Abbreviations
EU directives
This product complies with the
following EU directives:
2014 / 53 / EU, 2009/125/
EC, 2017/1369/EU, 2011/65/EU.
TV’s wireless system can only be used in
the countries below.
AT, BE, BG, CH, CY, CZ, DE, DK,
EE, ES, FI, FR, GB, GR, HU, IE,
IS, IT, LI, LT, LU, LV, MT, NL, NO,
PL, PT, RO, SE, SI, SK, HR, TR.
The use the 5150 -5350 MHz band is
restricted to indoor use only. (For Wi-Fi/
Bluetooth built-in model or Wi-Fi Built-in
model).
This device can also be operated in the
countries outside Europe.
2
ENGLISH
Page 2
About your TV set
7
With your TV set, you can receive and
watch digital TV programmes over DVBS, DVB-T and DVB-C, along with analogue TV.
7
Many features of the TV set require an In-
ternet connection. The TV set is equipped
with WLAN and a LAN port.
7
The TV set can record TV programmes.
For this feature you need a USB storage
device, such as an external hard drive
(not included). Recorded TV programmes
can only be played on the same TV set.
After the TV st is repaired, it is possible
that recorded programmes may no longer
be able to be played back.
7
You can talk to Amazon Alexa on your
Grundig TV, just push the button on your
remote and Alexa will respond instantly.
Intended use
7
The TV set is designed for use in dry
rooms.
7
Use the TV set with the supplied stand or
a suitable VESA bracket.
7
The TV set is primarily intended for the
playback of TV programmes, streaming
content and audio/video material from
external devices. Any other use is strictly
prohibited.
It is not intended as an information
display or for predominant use as a
computer monitor. If a still image or a
non-full-format image is displayed for
an extended period, visible traces may
remain on the screen for some time.
This is not a defect that can be used as
the basis for a warranty claim.
Safety
WARNING
Risk of electrical accident
7
Do not open the TV set. Safety risk may
arise and also the guarantee of the
product can be void if the television set is
opened.
7
The TV set can only be operated with the
power cable or the AC/DC adapter supplied with the product.
7
Do not operate the TV set with a dam-
aged power cord/AC/DC adaptor (if
supplied).
7
If the plug on the TV set has an earthing
contact, only insert the plug into a socket
with an earthing contact.
7
Plug the TV set into the mains socket only
after you have connected the external
devices and the antenna.
7
Protect the TV set from moisture. Do not
place any vessels filled with water (such
as vases) on the TV.
Fire hazard
7
7
Do not cover the ventilation slots on the
TV set.
7
Always unplug the power plug and an-
tenna plug during a thunderstorm.
7
Keep candles or other open flames away
from the TV set.
7
Do not expose the batteries to extreme
heat such as sunshine, fire or the like.
7
Only use batteries of the same type
(brand, size, properties). Do not use used
and new batteries together.
To prevent the spread of fire,
keep candles or other open
flames away from this product
at all times.
ENGLISH
3
Page 3
WARNING
Injuries caused by falling TV set
Never place the TV set on an unstable
surface. The TV set may fall, causing
serious injury, possibly leading to death in
isolated cases.
Observe the following precautions:
7
Only use the manufacturer’s
recommended cabinets or stands.
7
Only use furniture that can safely support
the TV set.
7
Make sure that the TV set does not
protrude beyond the dimensions of the
furniture on which it is resting.
7
Do not place the TV set on tall furniture
(such as kitchen cabinets, bookshelves)
without securely anchoring the furniture
and TV set.
7
Do not place the TV set on fabric or other
materials located between the TV set and
furniture.
7
Instruct children that there is danger
associated with climbing on furniture
when the TV set is to be reached.
NOTICE
Shortened service life due to high
operating temperature
7
Do not place the TV set next to heating
units or in direct sunlight.
7
To ensure adequate ventilation, maintain
clearance of at least 10 cm around the
TV set.
Discolouration of furniture due to
rubber feet
7
Some furniture surfaces may discolour
when they come in contact with rubber.
To protect furniture, you can place a
sheet made of glass or plastic under the
stand. Do not use textile underlays or
mats such as doilies.
Environmental information
7
Do not dispose of batteries in
the household waste. Used
batteries must be returned to
retail stores or public collection points.
You help to protect the environment in this
way.
7
Be sure to dispose of packaging
materials for your product separately
according to the guidelines of local
authorities so that they can be recycled in
an environmentally safe manner.
7
If you are not using your TV set for a
while, turn it to standby mode. In standby
mode, the TV set uses very little energy
(≤ 0.5 W).
If you do not use the TV set for an
extended period, turn it off with the
power switch or unplug the power cord
from the socket. If you turn off the device
or disconnect it from the power supply,
the switch-on timer and programmed
recordings will not work.
7
Select a location for the TV set so that
no direct sunlight falls on the screen. This
allows a lower backlight to be selected,
which saves energy.
7
life. Take it to a recycling centre for
electrical and electronic equipment.
Electromagnetic noise
7
Devices connected to the product (satellite
receiver, DVD player, and etc.) or signal
emitting devices (router and etc.) close to
the product may cause disturbance in the
image and noise in the sound.
7
Connection cables used on the product
must be shorter than 3 m.
7
If the product cannot perform its function
due to electrostatic discharge, the user
may need to switch off and then switch
on the product.
7
A shielded, HDMI-certified and ferrite
cable must be used with the product.
Do not dispose of the product
along with normal household
waste at the end of its service
4
ENGLISH
Page 4
Packing contents
1
3
FAV
GUIDE ? EXIT
TXT
HOMEBACK
SMARTTOOLS
MY MEDIA
2
4
6
User
Manual
Standart accessory
1. TV
2. Stand
3. Remote control
4. Batteries for remote controls
5. Screws and mounting instructions
for stand
6. Brief Instruction
5
Optional accessory
Easy-Use Remote Control
Batteries for Easy-Use remote controls
Cleaning cloth
VESA bracket screws
ENGLISH
5
Page 5
Setting up or hanging
7
Select a location so that no direct sunlight
falls on the screen.
Setting up with stand
7
To mount the stand, refer to the installa-
tion instructions included.
7
Place the TV set on a hard, level surface.
Preparing for mounting on
the VESA bracket
You will need:
7
A pair of scissors,
7
A crosstip screwdriver.
Follow the installation instructions for the
VESA bracket.
1. Place the TV set in the film on a smooth
surface with the screen facing down.
2. Cut open the film on the back side us-
ing the scissors.
3. Connect the required cables to the con-
nectors on the TV set. See the “Connections” section in this manual.
4. Tie the cables so they do not hang
down onto the floor.
5. Screw the VESA bracket onto the TV set
and mount it according to its installation
instructions.
VESA
6
ENGLISH
Page 6
Connections
USB1 HDMI1
7
Service: Service only.
7
LAN: Network connection
7
Optic Out: optical audio output
7
USB2 (HDD): connect data media for
recording programmes, such as an external hard disk.
7
HDMI3(ARC): Input for digital audio
and image data.
7
HDMI2: Input for digital audio and im-
age data.
7
SATELLITE: for satellite antenna.
Suitable for single-cable GSCR system.
7
ANT IN: for antenna cable (terrestrial
antenna or cable connection).
7
U: Headphone jack or line output via
adapter.
7
USB 1: for data media or keyboard.
7
HDMI1: Input for digital audio and im-
age data.
7
CI: for CA modules for receiving en-
crypted stations.
P+
+ -
P-
USB2
(HDD)
(ARC)
HDMI2HDMI3
13/18V
max.500mA
ANT-INOptic OutLANService SATELLITE
Control elements
Turning the TV to standby
1. 8 Switches the television on and back
into standby mode.
Adjusting the volume
1. o – Adjusts the volume.
2.
o + Adjusts the volume.
Changing the station
1. P– Selects channels in steps.
2. P+ Selects channels in steps.
ENGLISH
7
Page 7
Inserting batteries into the
remote control
1. Open the battery compartment.
2. Insert batteries as marked on the
bottom of the battery compartment
(2 × Alkaline/LR03/AAA).
3. Close the battery compartment.
Setting up the TV set
1. Connect the cables.
2. Insert the power plug into the socket.
3. Switch on the TV set with
remote control.
4. Follow the setup wizard on the screen.
5. Press the Amazon Alexa button on your
remote and ask Alexa a question (ex.
“Will it rain today in Berlin?”).
on the
Adding new TV stations
at a later point
1. Press
2. Select
3. Select »Source«.
4. Select »Automatic Channel Search«.
5. Select the antenna type.
6. The next procedure depends on the
HOME
.
.
selected antenna. Follow the instructions
on the screen.
Sorting TV stations in
the channel list
1. Press .
2. Press
3. Choose the TV station you want to
move, and highlight it with
4. Press
5. Use the navigation keys to move the TV
station to the new position and confirm
with
.
.
.
.
8
ENGLISH
Page 8
Smart remote controller
Switches on from standby
mode;
selects channels directly.
Selects the channel list
(»ALL«, »FAV 1« to
»FAV 4«).
Functions according to
the screen help, HbbTV.
Opens the electronic TV
guide.
Displays information.
Zapping function;
switches the menus back
one menu level.
Opens the channel list.
Opens the Tools menu.
Adjusts the volume.
Turns volume on/off (mute).
Record, playback, pause
or stop (only digital televi-
sion channels);
teletext on half screen.
Turns on and off the
television set (stand-by).
Signal source
Exits menu and
applications.
Opens the menu.
Opens Application portal
menu.
Talk to Amazon Alexa
Switches on from standby;
selects stations step by step
Next/previous image/
chapter, next/previous
track.
Activates/deactivates the
cursor.
Opens Screen share.
Microphone
Cursor Control
Moves the cursor up and down in
the menus.
Moves the cursor left/right in
menus.
Opens channel list;
activates various functions.
Select subtitle
Opens Media Player
menu.
Select audio channel
Switches between teletext
and TV modes.
ENGLISH
9
Page 9
Pairing the Smart remote
controller
Smart remote controller allows you to
control the TV set and access to Amazon
Alexa.
Cursor, Alexa and shifting functions of the
smart remote controller can only be used
after the remote has been paired with the
TV.
If you have not paired the Smart remote
controller during the initial stet-up, please
follow the instructions below.
1.
2. Select »
3. Select »TV«.
4. Select »Accessories«.
5. Select »Smart Remote«.
6. Press
7. Select »Start Search« and press
8. The »MAC ID« of the smart remove will
9. Press
HOME
Press
.
«.
HOME
and
on the remote
SMART
control until a beep is heard.
be displayed in the menu.
to complete the pairing
process.
.
Activating/deactivating the cursor
You can use the remote as a mouse thanks
to its cursor function.
1.
Press
.
– The cursor will be displayed.
2. You can use the cursor to control all the
supported operations and applications
on the screen.
Notes:
7
Cursor sensitivity may differ for each
user. You can make the cursor sensitivity
settings of your TV from Settings > TV >
Accessories > Sensitivity.
7
If the remote remains stable for 3 minutes
or if you enter menus such as Teletext
and EPG, the cursor will be deactivated.
Press to activate.
3. Press
cursor.
– The cursor will disappear.
again to deactivate the
10
ENGLISH
Page 10
Amazon Alexa
You can use the built-in Alexa functionality of
your TV through the remote controller. You can
speak into the remote and receive responses
and visual content onscreen instantly.
Note:
7
An internet connection and an Amazon
account are required to use Amazon Alexa.
1.
Press
Alexa.
– Listening voice chrome will be
displayed.
2. Say something into the microphone on
the remote. The Alexa-enabled TV will
recognize your request and respond back
through voice and visually. For example,
say “Will it rain today in Berlin?” into the
microphone. Alexa will respond back
with the weather forecast and a visual
image will be displayed on the TV screen.
Notes:
7
Alexa is not supported in all TV modes.
E.g. You cannot currently use Alexa
within the YouTube application.
7
Alexa support varies depending on your
geographical region.
7
Some service providers may not be
supported in your country.
7
Alexa can only be used when the TV
is connected to the internet (except for
select scenarios such as timer alerts).
7
Amazon Alexa responsiveness varies
based on voice level / tone and amount
of ambient noise.
7
Optimum voice level is 75 dB to 80 dB
for voice commands.
to begin talking to
Favourites lists
You can organise TV and radio stations in
favourites lists.
Saving a station to the favourites
list
1. Press .
2. Press
.
3. Select the favourites list and confirm
with
.
Opening the favourites list
1. Press .
2. Select the favourites list and confirm
with
– Now only stations that are stored in the
selected favourites lists are available.
.
Zapping function
This function allows you to save a station to
which you want to return during frequent
changes of the station (zapping).
1. Press
BACK
to save the current station.
2. Select other stations (zapping).
3. Press
BACK
to switch to the
station on which
BACK
was most recently
pressed.
4.
terminates the function.
HbbTV
HbbTV is the interactive successor to teletext, with content in modern design, highresolution images and video sequences.
For full functionality of HbbTV, the TV must
be connected to the Internet.
After you switch to a TV station that offers
HbbTV, a corresponding message appears.
1. Turn on HbbTV with the colour key that
appears after you switch to the TV station.
ENGLISH
11
Page 11
Recording from digital
TV stations
Recording and playback of TV programmes can only be carried out using an
external data medium (hard drive or USB
stick).
Direct recording
1. Press to record the current programme.
2. Press
Programming a recording
1. Press to display the programme
guide.
2. Select the required programme and
confirm with
3. Select »Recording« and confirm with
.
Editing the list of scheduled
recordings
1. Press
2. Select »Recording«.
3. Select »Schedule List«.
Tips
7
To start the recording, switch the TV set
to the corresponding station. A few seconds before the station is switched, a
message appears. You can cancel the
switching and the recording select »No«
with or and pressing .
7
The option of recording and playback
of recordings may be limited by the station provider.
7
External hard drives that require ≥
500 mA of current may only be connected to sockets USB2 (HDD).
7
For one hour of recording, you need 2.6
to 6.6 GB of storage space.
7
Recorded programmes can only be
played back on the same TV set.
to stop recording.
.
HOME
.
Watching TV with time shift
For this function, you need an external data
medium.
1. Press
gramme.
2. Press
3. Press
forward.
4. Press
programme.
Tips
7
The time shift can be up to one hour.
7
The option of watching TV with time shift
may be restricted by the station.
7
By default, rewinding is only possible up
to the point where you pressed .
You can set the TV set so that you can
rewind by up to an hour:
1. Press
2. Select »Settings«.
3. Select »
4. Select »Advanced«.
5. Select »Permanent Time Shift« and
switch it on with
6. Press
to pause the current pro-
to continue the programme.
/ for fast rewind/fast
to return to the current
HOME
.
«.
.
.
12
ENGLISH
Page 12
Media player
The media player displays images and
plays recorded programmes, films and music. Films, music and images can be stored
on a connected USB device or be provided
by a DLNA media server.
Playing media
1. Press .
2. Select media source. To play TV recordings on the external data medium,
select »PVR«.
3. To display image or music files: Select
on the top left, then »All«, »Music«
or »Photos«.
4. Navigate to the file or recording and
press
Tips
7
When playing films and images, press
buttons.
7
Music can be played with images. Dur-
ing the playback of images, press
and select .
7
Films can be played with subtitles. The
file name of the subtitle file must be identical to the file name of the film file. Both
files must be in the same folder. Subtitles
in the format .SRT, .SUB, .ASS, .SSA,
.SMI are supported.
Turning on the display of subtitles:
1. During playback of a film, press
2. Select Subtitles with
3. Enable subtitles with
.
on the remote control to display
.
.
.
Grundig Vision OS
Grundig Vision OS, offers apps that allow
you to conveniently use various Internet
services.
Opening Application Center
1. Press
2. Select the app and launch it with
on the remote control.
SMART
.
Opening All Apps
1. In the »Aplication Center« menu, select
the »All Apps« option on the top right.
Web browser
Launching the web browser
1. Press
2. On the menu bar, select the »Web
HOME
.
Browser« option.
ENGLISH
13
Page 13
GRUNDIG 55 VLO 9895 BP
Product data sheet
Energy efficiency class
A
Screen diagonal
139 cm/55 inch
Power consumption
Operation 110 W/350 W max.
Standby 0,45 W
Networked standby 2.90 W
Annual power consumption
161 kWh
Maximum resolution
3840 × 2160
Additional information
Operating voltage:
220 … 240 V~, 50 … 60 Hz
Screen (dm²)
82 dm²
RoHS limits
Pb (lead)/Hg (mercury)
Pb concentration complies with RoHS limits/
0 mg
Peak luminance ratio
65%
Audio output
2 × 30 W music power
2 × 15 W sine power + 15 W sine power of
the subwoofer
The subwoofer is optional and therefore not
available on all products.
Default satellites
20
LNB power supply
13/18 V, 14/19 V optional, maximum
500 mA
LNB switching signal
0/22 kHz 650 mV +/- 250 mVpp
DiSEqC
1.0-operation
Digital reception ranges
Satellite
Ku band: 10,700 MHz … 12,750 MHz
Modulation: DVBS QPSK, DVBS2 QPSK,
8 PSK
IF band: 950 MHz … 2150 MHz
Signal level: –25 dBm … –65 dBm
Cable
Overall band: 110 MHz … 862 MHz
Modulation: 16 QAM, 32 QAM,64 QAM,
128 QAM and 256 QAM
Symbol rate: 4.0 Msym/s … 7.2 Msym/s
Terrestrial (DVB-T)
VHF/UHF-Band, bandwidth 7 MHz and
8 MHz
FFT size: 2 k, 8 k
Modulation: 16 QAM, 64 QAM, QPSK
Guard interval: 1/4, 1/8, 1/16, 1/32
Terrestrial (DVB-T2)*
VHF/UHF-Band, bandwidth 7 MHz and
8 MHz
FFT size: 1 k, 2 k, 4 k, 8 k, 16 k, 32 k
Modulation: 16 QAM, 64 QAM,
256 QAM, QPSK
Guard interval: 1/4, 19/256, 1/8, 19/128,
1/16, 1/32, 1/128
* DVB-T2 is optional and therefore not avail-
able on all products.
Analogue reception ranges
C02 … C80, special channels S01 … S41
Preset channels
TV/Radio 6000 (satellite – DVB-S),
1000 (cable – DVB-C)
or 99 (analogue)
1000 (terrestrial – DVB-T) or
99 (analogue)
3 AV, 2 USB
Supported media files
Image files: jpg/jpe, bmp, png
Music files: m4a, aac
Video files: mov, xvid, mpg, mpe, vob,
dat, trp, ts, avi, mp4, mkv
Weight
approx. 25 kg
Dimensions
W × H × D 122,7 cm × 71,7 cm × 5 cm
14
Technical changes and errors reserved.
ENGLISH
Page 14
Licence
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
For DTS patents, see http://patents.dts.
com. Manufactured under license from DTS
Licensing Limited.
DTS, DTS-HD, the Symbol, & DTS or DTSHD and the Symbol together are registered
trademarks of DTS, Inc. © DTS, Inc. All
Rights Reserved.
Dolby, Dolby Vision, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
Explanation of the symbols
which may be present on back
side of the television set
Class II or Double insulation. Television set doesn’t
require connection to
electrical earth (ground).
Alternating current. The set
works only with AC line
voltage in your household
electricity.
Direct current. The set
works only with AC/DC
adapter.
Network interfaces
This product is intended for connection to
the ADSL network.
Cleaning the TV set
Pull the power cord out of the mains socket.
Clean the appliance with a damp cloth and
a mild detergent. Do not use any detergents containing alcohol, spirit, ammonia
or scouring agent.
Use a damp, soft cloth to clean the screen.
Do not use water with soap or detergent.
Abbreviations
7
ARC: Audio return channel, transmits
sound from the TV via an HDMI connection.
7
AV: Audio/video.
7
CAM: Module for receiving encrypted
TV channels.
7
CI: Slot for modules for receiving en-
crypted TV channels.
7
DLNA: Organisation that develops stan-
dards for networking home devices and
certifies devices and software.
7
GSCR: Grundig Sat Channel Router.
Technology that allows multiple TVs to be
connected to a satellite antenna using a
single-cable system.
7
HbbTV: Standard for information and ser-
vices that are offered with the TV signal
as well as by the Internet, an additional
service offered by some broadcasting
stations.
7
HD: Collective term for high-resolution
audio/video data, usually 720, 1080 or
2160 lines.
7
HDMI: Connection for high-resolution
digital audio/video data.
7
LAN: local area network.
7
VESA: Organisation that has developed
a standard for the attachment of screens.
7
WLAN: wireless local area network.
ENGLISH
15
Loading...