COLOR TELEVISION
SYDNEY
SE 7230/8 DOLBY
ǵ
ENGLISH
21826-941.1901
2
CONTENTS
__________________________________________________________________________
4 Sydney SE 7230/8 DOLBY
Special features of your TV set
Scope of delivery
6 Installation and Safety
8 At a Glance
The front of the TV set
The back of the TV set
The remote control
13 Connection and Preparation
Sample connection with video recorder, satellite receiver and decoder
Connecting a hifi system or active loudspeakers
Putting batteries into the remote control
15 Settings
Switching the television on/off
Programming TV channels
Setting the Dolby level
17 Easy Dialog System
The Easy Dialog System
The Dialog Center
Operating the Easy Dialog System
CONTENTS
__________________________________________________________________________________
ENGLISH
3
19 Customer Information
Technical data
Service information for the specialized dealer
Contact assignment for the EURO-AV socket
Additional Information for Units sold in Great Britain
22 Correcting Problems Yourself
4
Special features of your TV set
Technology
Super flat 72 cm colour picture tube (visible picture: 68 cm)
100 Hertz technology
GRUNDIG Megalogic
Megalogic possibilities:
– Perfect compatibility with the Megalogic video recorder. No troublesome
programming of channel positions.
– By starting playpack on the video recorder, the video programme position on
the TV set will be automatically selected.
Equipment
Dolby Surround *
Megatext, level 2.5, 512-page memory
Easy Dialog System
Retrofit options
VGA interface for connecting a PC
PIP - Picture in picture
Satellite receiver
* Under license from Dolby Laboratories Licensing Corporation."DOLBY" and the double-D symbol
ij are trademarks of Dolby Laboratories Licensing Corporation.
SYDNEY SE 7230/8 DOLBY
________________________________________
ENGLISH
5
SYDNEY SE 7230/8 DOLBY
____________________________________________________
Scope of delivery
1 TV set SYDNEY SE 7230/8 DOLBY
2 Remote control
3 2 batteries, 1.5 V–, Mignon (AA)
4 User manual
5 Mains cable
ǵ
COLOR TELEVISION
3
21
4 5 6
7 8 9
0
T
ELEPILOT 910C
TXT
P
P
OK
TV-GUIDE
1
2
3
4
5
6
INSTALLATION AND SAFETY
_______________________________
In order to assure that this high-quality and easy-to-use TV set will be able to
provide you with good service and pleasure for a long time to come, it is important that you observe the following points when installing the set.
This set has been designed for the reception and reproduction of picture and
sound signals.
Any other use is explicitly forbidden.
The ideal viewing distance from the screen is 5 times the diagonal width of the
screen.
External light shining on the screen adversely affects picture quality.
Assure that there is enough space inside a cabinet.
The TV set is designated for operation in dry rooms. Should you nevertheless
operate it outside, make absolutely sure that it is protected against dampness
(rain, water splashes). Never expose the TV set to any sort of moisture.
Do not place vessels filled with fluid (vases or similar things) on the TV set.
The vessel may tip over and the fluid may adversely affect electrical safety.
Put the TV set on an even and hard surface. Do not place objects (for example,
newspapers) on the TV set or place the set on a cloth cover, etc.
Do not place the TV set close to the heating or in direct sunshine as it could
overheat.
Heat build-up can be dangerous and is detrimental to the service life of the
equipment. From time to time, have a technician come to clean the inside of the
set.
Keep the TV set away from magnetic fields (for example stereo speakers).
10
cm
10
cm
20
cm
20 cm
5 x
Krieg am Golf
ENGLISH
7
INSTALLATION AND SAFETY
___________________________________________________
Do not open the TV set under any circumstance. The manufacturer will offer no
liability for damage resulting from unauthorized tampering.
Be sure that the mains cable is not damaged at any time.
Storms represent a danger for every type of electrical device. Even if the set is
switched off, it could be damaged by a lightning strike hitting the mains and/or
the aerial lead. Therefore, always disconnect the mains plug and aerial plug
when there is a storm.
When cleaning the screen, use only a soft, damp cloth. Use only clean water.
This TV set combines technology and ecology in a well thought-out overall concept. Only ecologically high-quality materials are used. The packaging is made
almost entirely of 100% recycled paper, and the portion of plastic has been
reduced to a minimum. The batteries supplied have no mercury or cadmium.
The number of plastic types has been reduced in order to ensure high-quality
recycling when the set is put out of use – all larger plastic parts are marked.
To facilitate maintenance work and recycling, this TV set is easy to disassemble.
! SERVICE !! SERVICE !
! SERVICE !
8
AT A GLANCE
___________________________________________________________________
The front of the TV set
IO
Switches the TV set on/off.
–
zz
+ Volume
–
P +
Select channel up/down.
S-VIDEO SVHS video input for camcorder.
VIDEO IN Video input for camcorder.
L AUDIO R Audio input for camcorder.
yy
Headphones connector
P
VIDEO IN L AUDIO RS-VIDEO
P
VIDEO IN L AUDIO RS-VIDEO
AT A GLANCE
_____________________________________________________________________________
ENGLISH
9
The back of the TV set
ʋʋ
Mains cable connection socket.
AV 1 Euro/AV sockets.
AV 2 Euro/AV sockets.
R AUDIO L Output sockets for hifi system.
É Aerial input (for house aerial).
L
AUDIO
R
AV2 AV1
10
AT A GLANCE
_____________________________________________________________________________
The remote control
You can use the TP 810 C remote control supplied not only with the TV set, but
also with a video recorder a satellite receiver.
Operating the TV set
ǼǼ
Switches the TV set to standby.
1 … 9 Channel selection and switch on the TV set from standby,
0 AV select AV position, enter teletext page numbers.
R Button illumination on/off. After a few moments, the illumination is
switched off automatically
pp,PP
Switching on the TV set from standby (only »PP«),
select channels step by step, cursor up/down.
FF EE
Volume, cursor left/right.
OK Changes and activates various functions.
i Call up DIALOG CENTER (with »i« and »OK«).
AKT TV-Guide, info about current broadcast.
TXT Teletext mode /TV mode switch-over.
ĭĭ
Sound on/off (mute).
see next page
Remote control cover
To open and close the cover, push in direction of the arrows.
VIDEO
AUX
SAT
PIP
3
21
4 5 6
7 8 9
0
TELE PILOT 910C
TXT
P
P
OK
TV-GUIDE
ENGLISH
11
AT A GLANCE
_____________________________________________________________________________
zz
Picture settings, calls up the »PICTURE SETTINGS« menu.
ȄȄ
Clock time on/off.
ǷǷ
Still picture.
FF
Sound settings »Stereo« and »Dolby Surround«,
calls up the »SOUND SETTINGS« menu.
- i
+
Colour contrast.
-
vv
+
Brightness.
PIP TV picture in teletext.
D
Brief instructions
E
Picture format switch-over
AUX Preselection button for various functions.
Operating a video recorder/satellite receiver
(see next page)
VIDEO
AUX
SAT
PIP
3
21
4 5 6
7 8 9
0
TELE PILOT 910C
TXT
P
P
OK
TV-GUIDE
12
AT A GLANCE
_____________________________________________________________________________
Operating a video recorder/satellite receiver
To operate a GRUNDIG video recorder press the »VIDEO« button and hold it
down. Then press the desired button.
To operate a GRUNDIG satellite receiver press the »SAT« button and hold it
down. Then press the desired button.
ǼǼ
Switches to standby.
1 … 0 Select channel positions and switch on from standby.
pp,PP
Select channels step by step.
● Recording
ı Playback
ll Pause
■ Stop
ĵķ Reverse picture search.
ĶŁ Forward picture search.
ĵĵ Fast reverse.
ŁŁ Fast forward.
Note:
Just try out which functions of your GRUNDIG device can be controlled.
VIDEO
AUX
SAT
PIP
3
21
4 5 6
7 8 9
0
TELE PILOT 910C
TXT
P
P
OK
TV-GUIDE
ENGLISH
13
CONNECTION AND PREPARATION
_______________
Sample connection with video recorder,
satellite receiver and decoder
Note:
To see what possibilities your television has for connecting external devices,
see the Easy Dialog System in the Audio/Video connections menu.
Consult page 17 and onwards to see how to use the Easy Dialog System.
If your video recorder is equipped with Megalogic functions, the video recorder and the TV set must be connected with the AV-EURO cable which was
included with the video recorder.
AV2 AV1
AUDIO
L
R
TV R
SAT
220-240 V
~
50-60 Hz
EURO AV VCREURO AV DECODEREURO AV TV
AUDIO OUT
R
L
INPUT-SAT
950-2150 MHz
14/18 V 450 mA
ń
R
L
AUDIO
R
L
I
N
O
U
T
2 EXTERNAL / DEC. - AV 2
1 EXTERNAL / EURO - AV 1
PAY-TV
Satellitenreceiver
Decoder
Videorecorder
14
CONNECTION AND PREPARATION
_______________________________________
Connecting a hifi system or active loudspeakers
Instead of using the television speakers as front speakers, you can use the loudspeakers of your hifi system or active front speakers.
1 Connect the hifi system or the active left/right speakers to the »L AUDIO R«
Cinch sockets.
Putting batteries into the remote control
1 Open the battery compartment by pulling off the cover.
2 Insert the batteries (Mignon, i.e. UM-3 or AA, 2x1.5V).
Observe the polarity when inserting the batteries.
Note:
If your television does not react to the remote control commands correctly,
then the batteries could be used up. Remove empty batteries. There is no
liability for damage caused by leaking batteries.
Environmental note:
The batteries – even those free of heavy metal – cannot be disposed of in
normal household rubbish. Used batteries must be disposed of in used
battery collection containers in businesses or be taken to public waste
disposal facilities.
AV2 AV 1
AUDIO
L
R
ENGLISH
15
SETTINGS
______________________________________________________________________________
Switching the TV set on/off
An LED next to the mains switch indicates the current operating mode by a
corresponding colour.
Green = Operation.
Yellow = TV-GUIDE mode, copy mode.
Red = Standby (energy saving mode, timer programmed).
Switching the TV set on
1 Press »IO« on the TV set.
The TV picture appears on the screen.
Switching the TV set to standby
1 Press »
ǼǼ
« on the remote control once
.
Switching the TV set off definitely
1 Press »IO« on the TV set, or
press »ǼǼ« on the remote control twice.
Condition:
The ecologic switch must be activated (Dialog Centre, »Special Functions«
menu).
Note:
The ecologic switch is not activated if a timer is programmed or the copy
mode activated.
Switching on again is only possible with »IO« on the TV set.
16
SETTINGS
____________________________________________________________________________________
Programming TV channels
The TV set is equipped with the automatic tuning system “ATS euro plus” which
carries out channel position assignment for you.
1 After switching on the TV set, select he »English« dialog language and con-
firm with »OK«.
Note:
If the »Select dialog language« page does not appear, press »i« and then
»OK« to display the Dialog Centre menu.
Use »,,« or »..« to select the »AUTOMATIC PROGRAMMING« row then
confirm with »OK«.
Use »,,« or »..« to select the »Complete Reprogramming when moving
house« row then confirm with »OK«.
2 Confirm your country with »OK«.
The automatic tuning system is started. Depending on the number of
channels which can be received, the search can take one minute and more.
3 When the automatic allocation of the channel positions is completed, a table
with information about the installation menu is displayed.
4 Press »TXT« to exit this table.
The »INSTALLATION« menu is displayed.
5 Make desired settings and end setting with »TXT« or, if you want to watch
television immediately, switch off menu with »TXT«. A menu with information on the Easy Dialog System appears.
6 Press »TXT« to switch to TV operation.
Note:
It is possible to call up all functions of the »INSTALLATION« menu also later
in the Easy Dialog Centre under »INSTALLATION«.
ENGLISH
17
EASY DIALOG SYSTEM
_____________________________________________
The Easy Dialog System
Your TV set is equipped with the Easy Dialog System.
That means that operating instructions are not, as is usual, in a printed manual,
but rather appear on the screen as dialog fields.
The Dialog Centre
The Dialog Centre is the control centre for your TV set.
Here you can make a variety of settings, call up information, and get specific
help for operating your television (e.g. info about the remote control, a list of
key words, tips and tricks).
Just try it out. You can’t do anything wrong.
1 Call up the Dialog Centre witht »i« and then »OK«.
– At ever y step of operation, the dialog symbols show which buttons can be
used to carry out particular functions.
OK
TXT
P+
P
-
1/2
REMOTE CONTROL
INDEX
PARENTAL LOCK
TV-PROGRAMME-CHART
AUTOMATIC PROGRAMMING
ACI, Megalogic, ATS
AUDIO-/VIDEO RE-RECORDING
To 2nd page
Call up
Help
TV
•
18
EASY DIALOG SYSTEM
_____________________________________________________________
Operating the Easy Dialog System
pp,PP
Move the yellow bar up/down.
With two-paged menus, the second page will be turned to.
FF EE
Change settings.
OK Calls up or confirms selected functions.
i Acces to the Dialog Centre (with »i« and »OK«),
one page back.
TXT Back to TV picture.
D
Calls up brief instructions.
PIP
VIDEO
TV-GUIDE
SAT
P
OK
P
TXT
AUX
ENGLISH
19
CUSTOMER INFORMATION
__________________________________
Technical data
Power supply voltage:
220 – 240 V, 50/60 Hz (control range of the power supply unit 190 … 264 V)
Power consumption:
in operation, 135 W, in standby <5 W
Sound output stage:
2 x 25 Watt music (2 x 12,5 Watt sine)
Reception ranges:
C01 … C99, special channels S01 … S41
20
CUSTOMER INFORMATION
_____________________________________________________
Service information for the specialized dealer:
The TV set may be operated only using the mains cable set supplied.
It prevents mains interference and is an integral part of the appliance approval.
For replacement purposes, please order only the mains cable set with the
designation “GWN 9.22/part number 8290.991-316” from an approved
after-sales service.
The product meets the requirements of the following EU guidelines:
73/23/EEC guideline on electrical equipment for use with certain
voltage limits.
89/336/EEC guideline on electromagnetic compatibility.
The appliance complies with the standards:
EN 60065, EN 55013, EN 55020
Contact assignment for the EURO-AV socket
If you want to connect an other appliance to the TV set (e.g. computer,
amplifier), your specialist dealer can establish a proper connection using the
following connection table:
pin signal
11 = audio output right
12 = audio input right
13 = audio output left
14 = audio ground
15 = blue ground
16 = audio input left
17 = RGB blue input
18 = switching voltage
19 = green ground
10 = data line (MEGALOGIC)
11 = RGB green input
12 = –
pin signal
13 = red ground
14 = ground
15 = RGB red input
(S Video = Chroma)
16 = RGB switching voltage
17 = video ground
18 = RGB switching
voltage ground
19 = video output
20 = video input,
(S Video = luminance)
21 = shielding/ground
21
220
119
ENGLISH
21
CUSTOMER INFORMATION
_____________________________________________________
Additional Information for Units sold in Great Britain
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
In case this appliance is supplied with a Safety Standard Approved mains lead
fitted with a non-rewireable 13 Amp mains plug which, if unsuitable for your
socket, should be cut off and an appropriate plug fitted by a qualified electrician. The fuse and fuse holder must be removed from the plug as accidental insertion of the redundant plug into a 13 Amp socket is likely to cause an electrical hazard.
Note:
The severed plug must be destroyed to avoid a possible shock hazard should it
be inserted into a 13 Amp socket elsewhere.
If it is necessary to change the fuse in the non-rewireable plug, the correct type
and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse
cover must be refitted. If the fuse cover is lost or damaged the lead and plug
must not be used until a replacement is obtained. Replacement fuse covers
should be obtained from your dealer.
If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must
be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any other type of
plug is used it must be protected by a 5 Amp fuse either in the plug or at the distribution board.
Important:
The wires in the mains lead are coloured in accordance with the following code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not correspond with the
coloured marking identifying the terminals in your plug, proceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter "N" or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or coloured
red.
In no circumstance must any of the wires be connected to the terminal marked with a letter "E",
earth symbol , coloured green or green and yellow.
Replacement mains lead can be obtained from your dealer.
22
CORRECTING PROBLEMS YOURSELF
____________
If the remedies below do not lead to a good result, contact an authorised GRUNDIG
dealer.
Please consider that problems can also be caused by external appliances, such as video
recorders and satellite receivers.
Problem Possible cause Remedy
no picture, no audio no mains voltage mains cable connected?
mains switch on?
TV set in standby switch on with remote control
TV set is not on a switch to another
occupied AV channel position channel position
picture is bright (grainy or blue) aerial cable aerial cable connected?
but no programme can be seen check aerial system?
no TV channel programmed start channel search
picture contrast incorrect picture settings change brightness, contrast, or
color settings
problem is with the broadcaster test another channel
poor picture and/or sound interference from other appliances change the position of the
(household appliances, mobile appliances
telephones etc.)
double image, reflection channel setting automatic or manual
channel setting/fine tuning
aerial have aerial cable or device
checked
no color color intensity is on minimum adjust color upward
TV standard setting select proper color standards
(if setting possibility is available)
problem is with the broadcaster test another channel
ENGLISH
23
Grundig AG • Kurgartenstraße 37 • D-90762 Fürth • http://www.grundig.de
CORRECTING PROBLEMS YOURSELF
____________________________________
Problem Possible cause Remedy
colors wrong, color spots strong magnetic field from increase distance of speaker
speakers (or other) to TV set
with permanent color spots,
switch off the TV set with the
mains switch and switch back
on after after 10 minutes
problem with terrestrial change appliance position
magnetic field
picture is there, no sound volume at minimum or increase/switch on volume
speakers switched off
volume regulation activated select sound output
via audio cinch socket via speaker
(if this possibility is available)
problem is with the broadcaster test another channel
SAT mode check AV cable between
TV set and receiver
sound unclear sound setting correct sound setting
poor or no Teletext TV channel (has no Teletext) check with another channel,
or check aerial system possibly double image or
reflection or fine tuning
transmission signal too weak check aerial system
(picture grainy)
remote control does not work no optical connection point remote control at the TV set
remote control batteries check or replace the batteries
pay attention to polarity
undefinable operating mode switch off TV set with the main
power button for about 2 minutes
After switching on, child lock is activated enter secret number or number
“child lock” appears on the menu combination 7038580.
Loading...