Page 1
COLOR TELEVISION
M 72-610/8 DOLBY
MF 72-620/8 DOLBY
MFW 82-620/8 DOLBY
ǵ
ENGLISH
22286-941.0400
;
Page 2
2
COLOR TELEVISION
_____________________________________________________
Scope of delivery
1 TV set 4 User manual
2 Remote control 5 Mains cable
3 2 batteries, 1.5 V–, Micro type
Contents
03 Special Features
11
Easy Dialog System
04 Installation and Safety
12
Additional Functions
06 At a Glance
14
Customer Information
08 Connection and Preparations
16
Correcting Problems Yourself
10 Settings
18
Customer information
1
2
3
4
5
M 72-610/8 Dolby
MF 72-620/8 Dolby
MFW 82-620/8 Dolby
ǵ
Tele Pilot 100 C
COLOR TELEVISION
Page 3
ENGLISH
3
SPECIAL FEATURES
_______________________________________________________
Technology
100 Hertz technology.
M 72-610/8 Dolby: 72 cm colour picture tube (visible picture: 68 cm);
MF 72-620/8 Dolby:
72 cm colour picture tube (visible picture: 68 cm);
MFW 82-620/8 Dolby:
82 cm colour picture tube (visible picture: 76 cm);
GRUNDIG Megalogic
Megalogic possibilities:
– Perfect communication with a Megalogic video recorder. No troublesome
programming of channel positions.
– By starting playpack on the video recorder, the video programme position on
the TV set will be automatically selected.
Equipment
Virtual Dolby Surround *;
Megatext level 2.5;
Easy Dialog System;
TV-Guide;
Alphanumeric channel position selection.
Retrofit options
VGA interface for connecting a PC;
PIP - picture-in-picture;
internal satellite receiver.
* Under license from Dolby Laboratories Licensing Corporation.
DOLBY and the double-D symbol ij are trademarks of Dolby Laboratories Licensing
Corporation.
Page 4
4
INSTALLATION AND SAFETY
_______________________________
In order to assure that this high-quality and easy-to-use TV set will be able to
provide you with good service and pleasure for a long time to come, it is important that you observe the following points when installing the set.
This set has been designed for the reception and reproduction of picture and
sound signals.
Any other use is explicitly forbidden.
The ideal viewing distance from the screen is 5 times the diagonal width of the
screen.
External light shining on the screen adversely affects picture quality.
Assure that there is enough space inside a cabinet.
The TV set is designated for operation in dry rooms. Should you nevertheless
operate it outside, make absolutely sure that it is protected against dampness
(rain, water splashes). Never expose the TV set to any sort of moisture.
Do not place vessels filled with fluid (vases or similar things) on the TV set.
The vessel may tip over and the fluid may adversely affect electrical safety.
Put the TV set on an even and hard surface. Do not place objects (for example,
newspapers) on the TV set or place the set on a cloth cover, etc.
Do not place the TV set close to the heating or in direct sunshine as it could
overheat.
Heat build-up can be dangerous and is detrimental to the service life of the
equipment. From time to time, have a technician come to clean the inside of the
set.
Keep the TV set away from magnetic fields (for example stereo speakers).
10
cm
10
cm
20
cm
20 cm
Krieg am Golf
5 x
Page 5
ENGLISH
5
INSTALLATION AND SAFETY
___________________________________________________
Do not open the TV set under any circumstance. The manufacturer will offer no
liability for damage resulting from unauthorized tampering.
Be sure that the mains cable is not damaged at any time.
Storms represent a danger for every type of electrical device. Even if the set is
switched off, it could be damaged by a lightning strike hitting the mains and/or
the aerial lead. Therefore, always disconnect the mains plug and aerial plug
when there is a storm.
When cleaning the screen, use only a soft, damp cloth. Use only clean water.
This TV set combines technology and ecology in a well thought-out overall concept. Only ecologically high-quality materials are used. The packaging is made
almost entirely of 100% recycled paper, and the portion of plastic has been
reduced to a minimum. The batteries supplied have no mercury or cadmium.
The number of plastic types has been reduced in order to ensure high-quality
recycling when the set is put out of use – all larger plastic parts are marked.
To facilitate maintenance work and recycling, this TV set is easy to disassemble.
! SERVICE !! SERVICE !! SERVICE !
Page 6
6
AT A GLANCE M 72-610/8 Dolby; MF 72-620/8 Dolby
_________
The front of the TV set
IO
Switches the TV set on/off.
An LED indicates the current operating mode.
Green = Operation.
Yellow = Standby (TV-GUIDE mode,
copy mode, Timer mode).
Red = Standby (power saving mode,
timer programmed).
–
zz
+ Volume
–
P + Channel selection
S-VIDEO SVHS video input for camcorder.
VIDEO IN Video signal input
L AUDIO IN R Audio signal input
yy
Headphones connector
The connectors at the rear of the TV set
É
Aerial socket
AV 1 Euro/AV socket
AV 2 Euro/AV socket
ʋʋ
Mains cable to wall outlet
Service socket for the specialized dealer
(below the cover.)
AV 1
VIDEO IN
S-VIDEO
P
L AUDIO R
P
VIDEO IN
S-VIDEO
L AUDIO R
AV 2
Page 7
ENGLISH
7
AT A GLANCE MFW 82-620/8 Dolby
___________________________________
The front of the TV set
IO
Switches the TV set on/off.
An LED indicates the current operating mode.
Green = Operation.
Yellow = Standby (TV-GUIDE mode,
copy mode, Timer mode).
Red = Standby (power saving mode,
timer programmed).
S-VIDEO SVHS video input for camcorder.
VIDEO IN Video signal input
L AUDIO IN R Audio signal input
yy
Headphones connector
The connectors at the rear of the TV set
É
Aerial socket
AV 1 Euro/AV socket
AV 2 Euro/AV socket
ʋʋ
Mains cable to wall outlet
Service socket for the specialized dealer
(below the cover.)
AV 1
S-VIDEOL AUDIO R VIDEO IN
AV 2
Page 8
8
AT A GLANCE
_____________________________________________________________________________
The remote control
ǼǼ
Switches the TV set off (standby).
PIP TV picture in teletext mode.
E
Picture format switching.
D
Displays the index A-Z.
1 … 0 Channel selection and switching on from standby,
alphanumeric channel selection (see page 13),
entry of teletext page numbers.
ĭĭ
Sound on/off (mute)
i Calls up the »Easy Dialog« menu.
Z Zap function (see page 12).
P+, P- Switching on from standby,
step-by-step channel selection, cursor up/down.
ǸǷ Volume, cursor to the left/right.
OK Changes and activates various functions.
TXT Teletext mode/TV mode.
TV-G TV-Guide, info about current programme.
zz
Calls up the »PICTURE« menu.
ȄȄ
Clock time and channel position information on/off.
ǷǷ
Still picture.
FF
Calls up the »SOUND« menu.
Mode Switches to the control of the basic functions of a Grundig satellite
receiver (SAT), video recorder (VCR) or DVD player (DVD).
Repeatedly press »Mode« until the respective LED »SAT«,
»VCR«, or »DVD« is lit. Then press the desired function button.
The selected mode remains active until the LED goes out. It is also
possible to switch the remote control back to TV mode by pressing
the »Mode« button.
Which functions can actually be controlled depends of course of
the equipment of the connected unit. Just try it out.
Page 9
ENGLISH
9
CONNECTION AND PREPARATION
_______________
Putting batteries into the remote control
1 Open the battery compartment by pulling off the cover.
2 Insert the batteries (Micro, e.g. LR 03 or AAA, 2x 1.5V) observing correct
polarity.
Note:
If your television does not react to the remote control commands correctly,
then the batteries could be used up. Remove empty batteries. There is no
liability for damage caused by leaking batteries.
Environmental note:
The batteries – even those free of heavy metals – cannot be disposed of in
normal household rubbish. Used batteries must be disposed of in used
battery collection containers in businesses or be taken to public waste
disposal facilities.
Sample connection with video recorder,
DVD player and decoder
Note:
The units to be conneccted must be set up in the »Installation« menu under the »Decice sockets« menu item.
See page 10 and onwards to see how to use the Easy
Dialog System.
If your video recorder is equipped with Megalogic
functions, it must be connected to the »AV 1« socket of the
TV set with the AV-EURO cable which was included with the
video recorder.
AV1
AV2
ń
R
L
AUDIO
R
L
I
N
O
U
T
2 EXTERNAL / DEC. - AV 2
1 EXTERNAL / EURO - AV 1
TV
VCR
AUX
R
L
VIDEO
DIGITAL
AUDIO
950-2150MHz
14/18V max 500mA
22kHz
IF INPUT DIGITAL
IF OUTPUT
DATA I/0
PAY-TV
TV R
DVD player
Decoder
Video recorder
Page 10
10
SETTINGS
______________________________________________________________________________
Programming TV channels
The TV set is equipped with the automatic tuning system “ATS euro plus” which
carries out the channel position assignment for you.
1 After switching on the TV set, select the »English« dialog language with
»P+, P-« then confirm with »OK«.
2 Select your country (place of installation) with »P+, P-« then confirm with
»OK«.
The automatic tuning system is started. Depending on the number of
channels which can be received, the search can take one minute and more.
3 When the automatic allocation of the channel positions is completed, the
»Easy Dialog tips« menu appears. Via this menu you may learn how to operate your TV set.
4 Select the desired menu item with »P-« then press »OK« to call it up.
5 To switch the set to TV mode, select »TV» with »P+, P-« then confirm with
»OK«.
Page 11
ENGLISH
11
EASY DIALOG SYSTEM
_____________________________________________
The Easy Dialog System
Your TV set is equipped with the »GRUNDIG Easy Dialog System«.
That means that operating instructions are not, as is usual, in a printed manual,
but rather appear on the screen as dialogue fields.
The »Easy Dialog« menu
The »Easy Dialog« menu is the control centre for your TV set.
Here you can make a variety of settings, call up information, and get specific
help for operating your television (e.g. info about the remote control, a list of
key words A-Z).
Just try it out. You can’t do anything wrong.
– At every step of operation, the dialog box shows which buttons can be used to
carry out particular functions.
Using the Easy Dialog system
Call up and exit the Easy Dialog.
Direct call of menu items.
Select menu items up/down.
Change settings.
Call up functions or confirm the selected function.
Call up help text.
Return to preceding menu.
i
1 … 0
P+, P -
ǸǷ
OK
D
FF
Page 12
12
ADDITIONAL FUNCTIONS
______________________________________
Zap function
With this function you may store the current channel position and switch to
another one (zap).
1 Use »1 … 0« or »P+, P -« to select the channel position you wish to store in
the zap memory (e.g channel position 7, PRO7) then press »Z« to store it.
On the picture screen appears, for example, »Z 7 PRO7«.
2 Using »1 … 0 « or »P+, P - « you now may switch to another channel
position.
3 By pressing »Z« you may switch at any time to the stored channel position
(PRO7 in the example) and switch back (zap) to the last viewed channel.
4 Press »i« to end the zap function. The on-screen display disappears.
›
Z 7 PRO7
Page 13
ENGLISH
13
ADDITIONAL FUNCTIONS
_______________________________________________________
Alphanumeric channel selection
You may select the channel positions directly by entering the channel name (e.g.
ARD). For this, letters are assigned to the numeric buttons »2 … 0«. Up to four
letters can be assigned.
1 Use »2 … 0« to enter the first letter of the channel name (e.g. »2« for the
letter A). A list of all TV channels beginning with the letters »A«, »B«, or »C«
appears on the picture screen.
Every entry of a further letter confines the list of channel names.
2 Use »P+, P - « to select the desired channel in the list then press »OK« to
call it up.
Note:
Three methods are possible for selecting a channel position:
1.
Letter entry off: The channels are only selected by entering digits.
2.
Letter entry on: The channels are only selected by entering alphanumeric
characters.
3.
Mix: When entering a digit, the TV set switches automatically to the
corresponding channel position and the channel list for assigning letters is
displayed.
Example: Press »3«. The TV set switches to channel position 3 (e.g. BR3),
in addition a list of the channels beginning with »D«, »E«, or »F« is
displayed.
The channel selection mode is selected in the »Installation« menu under the
»Special functions« menu item. See also the notes in the Easy-Dialog system.
Page 14
14
CUSTOMER INFORMATION
__________________________________
Technical data
Mains voltage: 220 – 240 V, 50/60 Hz,
(control range of the power supply unit 190 … 264 V)
Power consumption: M 72-610/8 Dolby
:
in operation 115 W, in standby 1 W
MF 72-620/8 Dolby
:
in operation 135 W, in standby 1 W
MFW 82-620/8 Dolby
:
in operation 105 W, in standby 1 W
Audio output stage: 2 x 20 Watt music power (2 x 10 Watt sine power)
Reception ranges: C01 … C99, special channels S01 … S41
Service hints for the specialized dealer
The TV set may be operated only with the mains calbe set supplied. It prevents
mains interference and is an integral part of the appliance approval. For replacement purposes, please order only the mains cable set with the designation
“GWN 9.22/part number 8290.991-316” from an approved after-sales
service.
The product meets the requirements of the following EU guidelines: 73/23/EEC
guideline on electrical equipment for use with certain voltage limits.
89/336/EEC guideline on electromagnetic compatibility.
The appliance complies with the standards: EN 60065, EN 55013, EN 55020
Page 15
ENGLISH
15
21
CUSTOMER INFORMATION
__________________________________
Pin assignment for the EURO-AV socket 1
Pin Signal
11 = audio output right
12 = audio input right
13 = audio output left
14 = audio ground
15 = blue ground
16 = audio input left
17 = RGB blue input
18 = switching voltage
19 = green ground
10 = data line (MEGALOGIC)
11 = RGB green input
12 = –
13 = red ground
14 = ground
15 = RGB red input, (S-Video = chroma)
16 = RGB switching voltage
17 = video ground
18 = RGB switching voltage ground
19 = video output
20 = video input (S-Video = luminance)
21 = shielding/ground
220
119
Page 16
16
CORRECTING PROBLEMS YOURSELF
____________
If the remedies below do not lead to a good result, contact an authorised GRUNDIG
dealer.
Please consider that problems can also be caused by external appliances, such as video
recorders and satellite receivers.
Problem Possible cause Remedy
When switching on the TV set for Some of the TV channels have ATS RESET: Turn off your TV set
the first time, the menu for selecting already been set using the main power button
the language not displayed. L+ and press main power and
turn is not displayed button at
the same time and turn TV set
on and off again. Then turn
your TV seton again.
Bright screen(noise or blue) Aerial cable. Aerial cable connected?
but no programme visible. Check aerial system.
Low picture contrast. Incorrect picture settings. Change brightness, contrast, or
colour settings.
Problem is with the broadcaster. Test another channel.
No colour Colour intensity is on minimum. Adjust color upward.
TV standard setting Select proper colour standard.
(if setting possibility is available).
problem is with the broadcaster Test another channel.
Colours wrong, colour spots. Strong magnetic field from Increase distance of speaker
speakers (or other). to TV set.
With permanent colour spots,
switch off the TV set with the
mains switch and switch back
on after 10 minutes
Terrestrial magnetic field interference Change position of unit.
Sound unclear Sound setting. Correct sound setting.
Page 17
ENGLISH
17
CORRECTING PROBLEMS YOURSELF
____________________________________
Problem Possible cause Remedy
Double image, reflection. Channel setting Automatic or manual
channel setting/fine tuning
Aerial Have aerial cable or device
checked
Picture is there, no sound. Volume at minimum or Increase/switch on volume.
speakers switched off.
Volume regulation activated Select sound output
via audio cinch socket via speaker.
(if this possibility is available).
Problem is with the broadcaster. Test another channel.
Poor picture, poor sound. Incorrect picture and sound Set picture and sound,
settings. call up factory presettings
by pressing »
i«, »
zz
«,«OK«
at the same time.
Poor or no Teletext. TV channel (has no Teletext) Check with another channel,
or check aerial system. possibly double image or
reflection, or fine tuning.
transmission signal too weak Check aerial system.
(picture noisy).
Remote control does not work. No optical connection. Point remote control at the TV set.
Remote control batteries. Check or replace the batteries,
pay attention to polarity.
Picture is dark, TV set has undefined operating status Turn your TV set off for approx.
switched itself off 2 min. using the main power
button
After switching on, Child lock is activated. Enter secret number or number
“child lock” appears on the menu. combination 7038580.
Wrong menu language. Wrong menu language selected. Call up the »Language« menu by
pressing »
i«, »5«,«1« at the
same time and select correct
language.
Page 18
18
Additional Information for Units sold in Great Britain
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
In case this appliance is supplied with a Safety Standard Approved mains lead
fitted with a non-rewireable 13 Amp mains plug which, if unsuitable for your
socket, should be cut off and an appropriate plug fitted by a qualified electrician. The fuse and fuse holder must be removed from the plug as accidental insertion of the redundant plug into a 13 Amp socket is likely to cause an electrical
hazard.
Note:
The severed plug must be destroyed to avoid a possible shock hazard should it
be inserted into a 13 Amp socket elsewhere.
If it is necessary to change the fuse in the non-rewireable plug, the correct type
and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse
cover must be refitted. If the fuse cover is lost or damaged the lead and plug
must not be used until a replacement is obtained. Replacement fuse covers
should be obtained from your dealer.
If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it
must be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any other
type of plug is used it must be protected by a 5 Amp fuse either in the plug or at
the distribution board.
CUSTOMER INFORMATION
_____________________________________________________
Important:
The wires in the mains lead are coloured in accordance with the following code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not correspond with the
coloured marking identifying the terminals in your plug, proceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter "N" or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or coloured
red.
In no circumstance must any of the wires be connected to the terminal marked with a letter "E",
earth symbol , coloured green or green and yellow.
Replacement mains lead can be obtained from your dealer.
Page 19
Page 20
Grundig AG • Beuthener Str. 41 • D-90471 Nürnberg • http://www.grundig.com
Loading...