Grundfos 97632138, 97632134, 97632137, 97632135, 97632136 Product Manual

GRUNDFOS PRODUCT GUIDE

S pumps, range 58

34 to 42 hp

60 Hz ANSI

S_Range_58-60Hz.book Page 1 Thursday, July 8, 2010 2:30 PM

Contents

2

Introduction

Introduction 3
Applications 3
Main constructional features 4

Performance range

Performance range, S pumps 5
Performance range, S pumps, range 58 5

Identification

Type key 6
Pump nameplate 7
FM approval plate 7

Selection of product

Ordering a pump 8

Product range

Standard range 9
Explosion-proof range 11
Explosion proof range with stainless steel impeller 12

Variants

List of variants 13

Construction

Sectional drawings, motors 14
Sectional drawings, pumps 18
Components and material specification 24

Product description

Features 25
Operating conditions 26
Motor range 26
Explosion-proof pumps 27
Pump controllers 27
Wiring diagrams 28

Curve charts/
Technical data

How to read the curve charts 29
Curve conditions 30
Performance tests 30
Certificates 30
Witness test 30

Performance curves
Technical data

S 58 extra-low pressure, 6-pole 32
S 58 low pressure, 4-pole 34
S 58 low pressure, 4-pole 36
S 58 medium pressure, 4-pole 38
S 58 high pressure, 4-pole 40

Accessories

Accessories (for installation) 42
Other accessories 43

Dimensions

Installation on auto coupling 44
Installation on ring stand 48
Dry pit, vertical installation 50
Dry pit, horisontal installation 52

Further product documentation

WebCAPS 54
WinCAPS 55

S_Range_58-60Hz.book Page 2 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

3

Introduction

Introduction

This product guide deals with Grundfos heavy-duty
sewage pumps called S pumps, range 58.

This product guide was printed in July 2010. A newer
version might be available from Grundfos WebCAPS.
Go to WebCAPS Literature to locate and download the
latest version - or insert the link below directly in your
browser to get to the download page:

http://net.grundfos.com/Appl/WebCAPS/

Using the PDF version of this data booklet offers extra
features to the booklet. Double-clicking a product
number listed in the data booklet will open an internet
browser window displaying all technical information
available on the product.

Fig. 1 S pump, range 58

The S pumps, range 58, are a range of free-flow
(SuperVortex) and channel impeller pumps specifically
designed for pumping sewage and wastewater in a
wide range of municipal, private and industrial applica­tions.

The pumps are made of resistant materials, such as
cast iron and stainless steel. These materials ensure a
proper operation.

The pumps are fitted with motors from 34 hp up to 45 hp
(25 kW up to 32 kW). The motors are 4-pole motors.

The free passage in the pumps is 3, 4 or 4.5" (80, 100
or 115 mm).

The pumps are available for:

• submerged installation on auto-coupling system

• submerged installation, free-standing

• dry-pit installation, vertical

• dry-pit installation, horizontal.

Applications

The S pumps, range 58, are designed for applications,
such as:

• raw water intake

• wastewater treatment plants

• municipal pumping stations

• public buildings

• residential housing

• blocks of apartments

• industries

• parking garages

• underground car parks

• car wash areas

• restaurants and hotels.

The pumps are suitable for both temporary and perma­nent installation. The lifting bracket fitted on the pumps
facilitates easy transportation to as well as installation
at the installation site.

GrA7835

S_Range_58-60Hz.book Page 3 Thursday, July 8, 2010 2:30 PM

Introduction

S pumps, range 58

4

Main constructional features

• leak-proof connections via the Grundfos SmartSeal
gasket system

• double mechanical shaft seal system for reliable
sealing between pumped liquid and motor

• watertight cable entry of corrosion-resistant polya­mide or cast iron for FM approved pumps

• moisture switch for continuous monitoring of motor
housing and automatic cut-off of power in case liq­uid penetrates

• self-cleaning channel impeller with long vanes re­ducing the risk of jamming or clogging, or SuperVor­tex impeller with high pumping efficency and less
downtime

• SmartTrim system allowing easy adjustment of im­peller clearance and maintaining maximum pump
efficiency over pump lifetime

• motor in insulation class H (356 °F (180 °C)), enclo­sure class IP68 with three thermal sensors in stator
windings

• seal condition monitoring via water-in-oil sensor
(optional)

• explosion-proof motors for applications involving
high risk of explosion

• stainless steel versions for use in corrosive or ag­gressive liquids:
Q: stainless steel impeller, cast iron pump and mo­tor housing.

S_Range_58-60Hz.book Page 4 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

5

Performance range

Performance range, S pumps

Performance range, S pumps, range 58

TM04 6557 0610TM04 6607 0610

100 150 200 300 400 500 800 1000 1500 2000 3000 5000 10000 15000

Q [US GPM]

6

8

10

15

20

30

40

60

80

100

150

200

300

[ft]

H

1010 20 30 40 50 60 7080 100100 200 300 400 600 800

Q [l/s]

2

3

4

5

6

8

1010

20

30

40

50

60

80

[m]

H

60 Hz

50

54

58

62

66

70

20000

0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 4400

Q [US GPM]

15

20

25

30

40

50

60

80

100

120

150

200

[ft]

H

0 50 100 150 200 250

Q [l/s]

5

6

7

8

9

1010

20

30

40

50

60

[m]

H

60 Hz

S Pumps

Range 58

S

1

.

4

0

.

A

5

0

S2.40.A80S1.45.A80

S1.30.A50

S_Range_58-60Hz.book Page 5 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

6

Identification

Type key

Code Example S 1 .30 .A50 .420 4 .58H .C .307 .G .N .D

S

ST

Pump type:

Grundfos sewage and wastewater pump
Multi-channel impeller pump installed in a column pipe

1
V

Impeller type:

Single-channel impeller
SuperVortex (free-flow) impeller

Pump passage:

Maximum solids size = Code number from type designation/10 [inch]

A50

Pump discharge:

Nominal diameter of pump discharge port = Code number from type designation/10 [inch]
5"

Output power, P2:

P2 = Code number from type designation/10 [hp]

4

Number of poles:

4-pole motor

58H
58M
58L

Pump range / Pressure version:

High pressure
Medium pressure
Low pressure

S
C
D
H

Installation:

Submersible ins tallation without c ooling jacket
Submersible installation with cooling jacket
Dry installation, vertical
Dry installation, horizontal.

Actual impeller diameter:

[mm]

G

Material code for impeller, pump and motor housing:

Impeller, pump housing and motor housing: Cast iron

N

Ex

Pump version:

Non-explosion-proof pump
Explosion-proof pump

B
C
D

Sensor version:

B = S pump with built-in SM 111 module. PTC sensors are connected directly to IO 111 or other PTC relay.
C = Not in use
D = S pump without built-in SM 111 module.

Z Custom-built products

S_Range_58-60Hz.book Page 6 Thursday, July 8, 2010 2:30 PM

Identification

S pumps, range 58

7

Pump nameplate

Fig. 2 Pump nameplate

FM approval plate

Fig. 3 Ex approval plate

The approval plate gives the following details:

TM04 6494 1210

Pos. Description

1 Type designation

2 SAP code

3 Serial number

4 Maximum ambient temperature

5 Maximum head

6 Maximum flow

7 Maximum installa tion depth

8 Enclosure class

9 Number of phases

10 F requency

11 Rated sp eed

12 Voltage/current, delta connection

13 Voltage/current, star connection

14 Power input/output

15 Service factor

16 Power factor

17 I nsulation class

18 Production code, year/week

19 Weight of the pump

20 Model

2

1

3

5
7
9

10

13
14

16
18

20
4
6

8

11
12

17
19

15

TM04 6495 0210

FM symbol

II Equipment group (II = non-mining)

2 Equipment category (high protection)

G Type of explosive atmosphere

CE CE mark

1180 Number of quality assurance notified body

Ex Motor explosion-proof according to FM standard

b Control of ignition sources

c Constructional safety

d Motor wit hstands explosion pressure

IIB Gas group (Ethylene)

T3C

Maximum surface temperature of the mo tor is 320 °F
(160 °C)

T4

Maximum surface temperature of the mo tor is 275 °F
(135 °C)

Gb Equipment protection level, zone 1

Baseefa Certificate number

FM Certificate number

FM

S_Range_58-60Hz.book Page 7 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

8

Selection of product

Ordering a pump

When ordering an S pump, range 58, you need to take
the following four aspects into consideration.

1. Pump

2. Custom-built variation (option)

3. Accessories

4. Controller.

Pump

Use the selection tool in WebCAPS to find the best
suited pump for your application or use the
section Product range on page 9 and the section Type
key on page 6 to identify the pump that best fulfils your
needs. The list below is a detailed description of the
product you get if you order the following pump:

• Pump as specified in the type key

• 50 ft (15 m) cable

• Paint: Graphic grey, NCS S8005-R80B, thickness
150 μ

• Three thermal switches (Klixon), one in each phase,
or three thermal sensors (PTC)

• One moisture switch below the motor top cover (two
moisture switches below the motor top cover on
explosion-proof versions)

• ANSI-HI centrifugal pump, test 1.6-2000
Acceptance level B.

See section Performance curves Technical data for
selection of a standard pump.

Note: Product specific data for the pump can also be
seen in WebCAPS using the product number

97632138.

Custom-built variants

The S pumps can be customised to meet individual
requirements. Many pump features and options are
available for customisation, e.g. explosion-proof
versions, various cable lengths or special materials.

Variants can be seen in section List of variants on page

13. For requirements or designs not included in the list,
contact Grundfos.

Accessories

Depending on the installation type, you may need to
order accessories. See section Accessories on page
42 for selection of the correct accessories.

Note: Ordered accessories are not fitted from factory.

Controller

The following controllers are available:

Grundfos Dedicated Controls (DC).

Pump Product no

S1.30.A50.420.4.58H.C.307.G.N.D 97632138

S_Range_58-60Hz.book Page 8 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

9

Product range

Standard range

* Without hose connection.

** Installation type S and C pumps with discharge flange size 10" (DN 250) and highe r are supplied with guid e claw mounted on the flange.

*** The horizontal base stand is included in the pump product number.

Pump type Pump

Accessories

*** Horizontal base

stand

To be ordered separately

Vertical base

stand

** Auto-coupling

system

* Ring stand for

portable use

S1.30.A50 .340. 4.58H .S.2 90.G.N.D 97632133 - - 97626242 96856262

S1.30.A50 .340. 4.58H .C.2 90.G.N.D 97632134 - - 97626242 96856262

S1.30.A50 .340. 4.58H .D.2 90.G.N.D 97632135 - 96308238 - -

S1.30.A50 .340. 4.58H .H.2 90.G.N.D 97632136 96782930 - - -

S1.30.A50 .420. 4.58H .S.3 07.G.N.D 97632137 - - 97626242 96856262

S1.30.A50 .420. 4.58H .C.3 07.G.N.D 97632138 - - 97626242 96856262

S1.30.A50 .420. 4.58H .D.3 07.G.N.D 97632139 - 96308238 - -

S1.30.A50 .420. 4.58H .H.3 07.G.N.D 97632140 96782930 - - -

S1.45.A80 .420. 4.58L .S.2 64.G.N.D 97632141 - - 97506541 96790704

S1.45.A80 .420. 4.58L .C.264.G.N.D 97632142 - - 97506541 96790704

S1.45.A80 .420. 4.58L .D.264.G.N.D 97632143 - 96856263 - -

S1.45.A80 .420. 4.58L .H.264.G.N.D 97632144 96856265 - - -

S1.40.A50 .420. 4.58M .S.2 78.G.N.D 9 7632145 - - 97626242 96856262

S1.40.A50 .420. 4.58M .C.278.G.N.D 97632146 - - 97626242 96856262

S1.40.A50 .420. 4.58M .D.278.G.N.D 97632147 - 96094523 - -

S1.40.A50 .420. 4.58M .H.278.G.N.D 97632148 967 84437 - - -

S2.40.A80 .420. 4.58L .S.2 27.G.N.D 97632149 - - 97506541 96790704

S2.40.A80 .420. 4.58L .C.227.G.N.D 97632150 - - 97506541 96790704

S2.40.A80 .420. 4.58L .D.227.G.N.D 97632151 - 96856263 - -

S2.40.A80 .420. 4.58L .H.227.G.N.D 97632152 96856265 - - -

S2.40.A12 0.340 .6.58 E.S. 295.G.N.D 97632153 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.C. 295.G.N.D 976321 54 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.D. 295.G.N.D 976321 55 - 96856263 - -

S2.40.A12 0.340 .6.58 E.H. 295.G.N.D 976321 56 96856265 - - -

S_Range_58-60Hz.book Page 9 Thursday, July 8, 2010 2:30 PM

Product range

S pumps, range 58

10

Standart range with stainless steel impeller

* Without hose connection.

** Installation type S and C pumps with discharge flange size 10" (DN 250) and highe r are supplied with guid e claw mounted on the flange.

*** The horizontal base stand is included in the pump product number.

Pump type Pump

Accessories

*** Horizontal base

stand

To be ordered separately

Vertical base

stand

** Auto-coupling

system

* Ring stand for

portable use

S1.30.A50 .340. 4.58H .S.2 90.Q.N.D 97647810 - - 9 7626242 96856262

S1.30.A50.340.4.58H.C.290.Q.N.D 97647811 - - 97626242 96856262

S1.30.A50 .340. 4.58H .D.2 90.Q. N.D 97647812 - 96308238 - -

S1.30.A50 .340. 4.58H .H.2 90.Q. N.D 97647813 96782930 - - -

S1.30.A50 .420. 4.58H .S.3 07.Q.N.D 97647814 - - 9 7626242 96856262

S1.30.A50 .420. 4.58H .C.3 07.Q. N.D 97647815 - - 97626242 96856262

S1.30.A50 .420. 4.58H .D.3 07.Q. N.D 97647816 - 96308238 - -

S1.30.A50 .420. 4.58H .H.3 07.Q. N.D 97647817 96782930 - - -

S1.45.A80 .420. 4.58L .S.2 64.Q. N.D 97661423 - - 97506541 96790704

S1.45.A80 .420. 4.58L .C.264.Q. N.D 97661424 - - 97506541 96790704

S1.45.A80 .420. 4.58L .D.264.Q. N.D 97661425 - 96856263 - -

S1.45.A80 .420. 4.58L .H.264.Q. N.D 97661427 96856265 - - -

S1.40.A50 .420. 4.58M .S.2 78.Q. N.D 97647818 - - 97626242 96856262

S1.40.A50 .420. 4.58M .C.278.Q. N.D 97647819 - - 9 7626242 96856262

S1.40.A50 .420. 4.58M .D.278.Q. N.D 97647820 - 9 6094523 - -

S1.40.A50 .420. 4.58M .H.278.Q. N.D 97647821 96784437 - - -

S2.40.A80 .420. 4.58L .S.2 27.Q. N.D 97647822 - - 97506541 96790704

S2.40.A80 .420. 4.58L .C.227.Q. N.D 97647823 - - 97506541 96790704

S2.40.A80 .420. 4.58L .D.227.Q. N.D 97647824 - 96856263 - -

S2.40.A80 .420. 4.58L .H.227.Q. N.D 97647825 96856265 - - -

S2.40.A12 0.340 .6.58 E.S. 295.Q.N.D 97647826 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.C. 295.Q .N.D 97647827 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.D. 295.Q .N.D 97647828 - 96856263 - -

S2.40.A12 0.340 .6.58 E.H. 295.Q .N.D 97647829 96856265 - - -

S_Range_58-60Hz.book Page 10 Thursday, July 8, 2010 2:30 PM

Product range

S pumps, range 58

11

Explosion-proof range

* Without hose connection.

** Installation type S and C pumps with discharge flange size 10" (DN 250) and highe r are supplied with guid e claw mounted on the flange.

*** The horizontal base stand is included in the pump product number.

Pump type Pump

Accessories

To be ordered separately

*** Horizontal base

stand

Vertical base

stand

** Auto-coupling

system

* Ring stand for

portable use

S1.30.A50 .340. 4.58H .S.2 90.G.Ex.D 97660672 - - 97626242 96856262

S1.30.A50 .340. 4.58H .C.2 90.G.Ex.D 97660673 - - 97626242 96856262

S1.30.A50 .340. 4.58H .D.2 90.G.Ex.D 97660674 - 96308238 - -

S1.30.A50 .340. 4.58H .H.2 90.G.Ex.D 97660675 96782930 - - -

S1.30.A50 .420. 4.58H .S.3 07.G.Ex.D 97660676 - - 97626242 96856262

S1.30.A50 .420. 4.58H .C.3 07.G.Ex.D 97660677 - - 97626242 96856262

S1.30.A50 .420. 4.58H .D.3 07.G.Ex.D 97660678 - 96308238 - -

S1.30.A50 .420. 4.58H .H.3 07.G.Ex.D 97660679 96782930 - - -

S1.45.A80 .420. 4.58L .S.2 64.G.Ex.D 97660680 - - 97506541 96790704

S1.45.A80.420 .4.58L.C.264. G.Ex.D 97660711 - - 97506541 96790704

S1.45.A80 .420. 4.58L .D.264.G.Ex.D 97660712 - 96856263 - -

S1.45.A80 .420. 4.58L .H.264.G.Ex.D 97660713 96856265 - - -

S1.40.A50 .420. 4.58M .S.2 78.G.Ex.D 976607 14 - - 97626242 96856262

S1.40.A50 .420. 4.58M .C.278.G.Ex.D 97660715 - - 97626242 96856262

S1.40.A50 .420. 4.58M .D.278.G.Ex.D 97660716 - 96094523 - -

S1.40.A50 .420. 4.58M .H.278.G.Ex.D 97660717 96784437 - - -

S2.40.A80 .420. 4.58L .S.2 27.G.Ex.D 97660718 - - 97506541 96790704

S2.40.A80 .420. 4.58L .C.227.G.Ex.D 97660719 - - 97506541 96790704

S2.40.A80 .420. 4.58L .D.227.G.Ex.D 97660720 - 96856263 - -

S2.40.A80 .420. 4.58L .H.227.G.Ex.D 97660721 96856265 - - -

S2.40.A12 0.340 .6.58 E.S. 295.G.Ex.D 97660722 - - 9751 0049 96856259

S2.40.A12 0.340 .6.58 E.C. 295.G.Ex. D 97660723 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.D. 295.G.Ex. D 97660724 - 96856263 - -

S2.40.A12 0.340 .6.58 E.H. 295.G.Ex. D 97660725 96856265 - - -

S_Range_58-60Hz.book Page 11 Thursday, July 8, 2010 2:30 PM

Product range

S pumps, range 58

12

Explosion proof range with stainless steel impeller

* Without hose connection.

** Installation type S and C pumps with discharge flange size 10" (DN 250) and highe r are supplied with guid e claw mounted on the flange.

*** The horizontal base stand is included in the pump product number.

Pump type Pump

Accessories

*** Horizontal base

stand

To be ordered separately

Vertical base

stand

** Auto-coupling

system

* Ring stand for

portable use

S1.30.A50 .340. 4.58H .S.2 90.Q.Ex.D 97663643 - - 97626242 96856262

S1.30.A50 .340. 4.58H .C.2 90.Q. Ex.D 97663644 - - 97626242 96856262

S1.30.A50 .340. 4.58H .D.2 90.Q. Ex.D 97663645 - 9 6308238 - -

S1.30.A50 .340. 4.58H .H.2 90.Q. Ex.D 97663646 96782930 - - -

S1.30.A50 .420. 4.58H .S.3 07.Q.Ex.D 97663647 - - 97626242 96856262

S1.30.A50 .420. 4.58H .C.3 07.Q. Ex.D 97663648 - - 97626242 96856262

S1.30.A50 .420. 4.58H .D.3 07.Q. Ex.D 97663649 - 9 6308238 - -

S1.30.A50 .420. 4.58H .H.3 07.Q. Ex.D 97663650 96782930 - - -

S1.45.A80 .420. 4.58L .S.2 64.Q. Ex.D 97663691 - - 97506541 96790704

S1.45.A80 .420. 4.58L .C.264.Q. Ex.D 97663692 - - 97506541 96790704

S1.45.A80 .420. 4.58L .D.264.Q. Ex.D 97663693 - 9685 6263 - -

S1.45.A80 .420. 4.58L .H.264.Q. Ex.D 97663694 96856265 - - -

S1.40.A50 .420. 4.58M .S.2 78.Q. Ex.D 97663695 - - 97626242 96856262

S1.40.A50 .420. 4.58M .C.278.Q. Ex.D 97663696 - - 97626242 96856262

S1.40.A50 .420. 4.58M .D.278.Q. Ex.D 97663697 - 96094523 - -

S1.40.A50 .420. 4.58M .H.278.Q. Ex.D 97663698 96784437 - - -

S2.40.A80 .420. 4.58L .S.2 27.Q. Ex.D 97663699 - - 97506541 96790704

S2.40.A80 .420. 4.58L .C.227.Q. Ex.D 97663700 - - 97506541 96790704

S2.40.A80 .420. 4.58L .D.227.Q. Ex.D 97663701 - 9685 6263 - -

S2.40.A80 .420. 4.58L .H.227.Q. Ex.D 97663702 96856265 - - -

S2.40.A12 0.340 .6.58 E.S. 295.Q.Ex.D 97663703 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.C. 295.Q .Ex.D 97663704 - - 97510049 96856259

S2.40.A12 0.340 .6.58 E.D. 295.Q .Ex.D 97663705 - 96856263 - -

S2.40.A12 0.340 .6.58 E.H. 295.Q .Ex.D 97663706 96856265 - - -

S_Range_58-60Hz.book Page 12 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

13

Variants

List of variants

Motor

Various cable lengths

82 ft (25 m)

165 ft (50 m)

EMC power cables Screened power cables for variable speed drives

33 ft (10 m)

50 ft (15 m)

82 ft (25 m)

165 ft (50 m)

Special motor Special voltage

PTC thermistors in winding s

Special oil Non-toxic Shell Ondina 917

Motor protection

PTC + moisture switch FPV1

Klixon + moisture switch + WIO FPV2a

PTC + moisture switch + WIO FPV2b

Klixon + mois ture switch + WIO + PT100 at lowe r and upper bearing FPV4a

PTC + moisture switch + WIO + PT100 at lower and upper bearing FPV4b

Materials

Stainless steel lifting br acket AISI 316

Stainless steel impeller Variant Q

Stainless steel impeller and pump housing Variant S

Stainless steel Impeller, pump housing and motor housing Variant R

Tes ts

Test at specified duty on standard impeller curve

Trimmed impeller for spec ified duty test

Additional test of entire QH curve (incl. report) 5-10 flows from pump performance curve

Different test s tandard Efficien cy guaranteed by Grundfos

ISO 9906 grade 1 tolerances

ISO 9906 grade 2 tolerances

Vibration test (incl. report) According to Grun dfos factory quality standard

Performance test on dry test stand Not yet available

NPSHr test Not yet available

String test Contact Grundfos

Witness test Contact Grundfos

Miscellaneous

Special packaging Contact Grundfos

Special nameplate Contact Grundfos

Other variants Contact Grundfos

S_Range_58-60Hz.book Page 13 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

14

Construction

Sectional drawings, motors

Fig. 4 Non-explosion-proof motor without cooling jacket

TM04 2306 2308

S_Range_58-60Hz.book Page 14 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

15

Fig. 5 Non-explosion-proof motor with cooling jacket

TM04 2307 2308

S_Range_58-60Hz.book Page 15 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

16

Fig. 6 Explosion-proof motor without cooling jacket

TM04 2308 2308

S_Range_58-60Hz.book Page 16 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

17

Fig. 7 Explosion-proof motor with cooling jacket

TM04 2309 2308

S_Range_58-60Hz.book Page 17 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

18

Sectional drawings, pumps

Fig. 8 S1 pump

TM04 2310 2308

S_Range_58-60Hz.book Page 18 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

19

Fig. 9 SV pump

TM04 2311 2308

S_Range_58-60Hz.book Page 19 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

20

Fig. 10 S1 pump with DN 2 > DN 400

TM04 2312 2308

S_Range_58-60Hz.book Page 20 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

21

Fig. 11 Installation type S and C pump on auto coupling

TM04 2315 2308f

S_Range_58-60Hz.book Page 21 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

22

Fig. 12 Installation type D pump

TM04 2316 2308

731

S_Range_58-60Hz.book Page 22 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

23

Fig. 13 S1 pump, installation type H

Fig. 14 SV pump, installation type H

TM04 2313 2308TM04 2314 2308

S_Range_58-60Hz.book Page 23 Thursday, July 8, 2010 2:30 PM

Construction

S pumps, range 58

24

Components and material specification

Motor

Pump

Accessories

* Ex versions have cast iron cable entry and two moisture switches.

** Available of stainles s steel (custom-built option).

Pos. Component Material (AISI/DIN W.-Nr.)

7a Rivet Stainless steel (316/1.4436)

25a Screw Stainless steel (316/1.4436)

25 Pressure test plug Stainless steel (316/1.4436)

48 Stator lamination

**55 Stator housing Cast iron (EN-JL 1040/A48 30)

58 Seal housing Cast iron

60 Bearing bracket cover Cast iron

61c Upper bearing bracket Cast iron

72a O-ring NBR rubber

72 O-ring NBR rubber

76a Approval plate

100 O-ring NBR rubber

105b Mechanical s eal SiC/SiC or SiC/carbon

105 Mechanical seal SiC/SiC or SiC/carbon

150c Cooling jacket Galvanised steel

153 Ball bearing Stainless st eel

154 Ball bearing Stainless st eel

**155 Lower bearing bracket Cast iron

157b O-ring NBR rubber

157 O-ring NBR rubber

**164a Motor top cover Cast iron

*168 Ca ble entry PA or cast iron

172 Shaft with rotor Stainless steel (329/1.44 62)

173b E arth t ermin al

173c Washer Stainless steel ( 316/1.4436)

173e Screw Stainless steel (316/1.4436)

173f Spring washer Stainless steel (316/1.4436)

173g Earth connector

173 Screw Stainless steel (316/1.4436)

176a Terminal block

176b Screw Stainless steel (316/1.4436)

176c Terminal block

176d Terminal block

178 Screw Stainless steel (316/1.4436)

180 Cable clamp PA or cast iron

181a Screw Stainless steel (316/1.4436)

181 Cable ATON

182b

Hexagon socket head
cap screw

Stainless steel (316/1.4436)

184b Screw Stainless steel (316/1.4436)

184 Screw Stainless steel (316/1.4436)

187a Washer Stainless steel (316/1.4436)

187 Circlip

188 Circlip

190 Lifting bracket Stainless steel (316/1.4408)

193 Plug Stainless steel (316/1.4408)

194 O-ring NBR rubber

197 Washer Stainless steel (316/1.4436)

198 Rubber seal

248 Screw Stainless steel (316/1.4436)

250a Cable entry PA or cast iron

250b Rubber s eal

250 Cable clamp PA or cast iron

252 Cable ATON

520a Screw Stainless steel (316/1.4436)

520b Nut Stainless steel (316/1.4436)

*520 Moisture switch

522 Holder

Pos. Component Material (AISI/DIN W.-Nr.)

7a Rivet

9a Key (for keyway) Stainless steel (316/1.4436)

12c Adjusting screw Stainless steel (316/1.4 436)

26 Screw Stainless steel (316 /1.4436)

37 O-ring NBR rubber

37b O-ring NBR rubber

**49 Impeller Cast iron EN-JL 1050

**50 Volute casing Cast iron EN-JS 1 050

67 Impeller screw Stainless steel (316/1 .4436)

76 Nam eplat e

301 Motor housing

494 Plug Stainless steel (316/1.4436)

495 O-ring NBR rubber

Pos. Component Material

**701 Auto-coupling base unit Cast iron

**702 Guide rail bracket Cast iron

**703 Guide claw Cast iron

731 Base stand, vertical Galvanised s teel

749 Bend Cast iron

751 Ring stand Galvanised steel

**761 Hose connector Cast iron or stainless steel

487 Base stand, horizontal G alvanised steel

799 Ancho r bol t

Pos. Component Material (AISI/DIN W.-Nr.)

S_Range_58-60Hz.book Page 24 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

25

Product description

Features

SmartTrim

On conventional pumps, maintaining factory-set
impeller clearance is a time-consuming and costly task.
The pumps need to be disconnected from the pipework
and to be totally dismantled, and new parts need to be
mounted in order to maintain full pumping efficiency.
Not so with Grundfos SmartTrim!

All Grundfos heavy-duty channel-impeller pumps,
whether for submerged or dry installation, are equipped
with the unique SmartTrim impeller clearance
adjustment system. This enables you to easily restore
factory-set impeller clearance and maintain peak
pumping efficiency. All you need to do is to tighten the
adjustment screws on the exterior of the impeller
housing. This can be done on site, quickly and easily,
without dismantling the pump and without using special
tools.

A: With Grundfos SmartTrim impeller clearance
adjustment system

B: Without impeller clearance adjustment system

SmartSeal

For pumps with 10" discharge or larger, the Grundfos
SmartSeal auto-coupling gasket mounted on the pump
discharge flange provides a completely leak-proof
connection between the pump and the base unit of the
auto-coupling system. This optimises the efficiency of
the entire pumping system and keeps operating costs
at a minimum.

Ball bearings

The bearings are greased for life.

Main bearings: Double-row angular contact ball
bearing

Support bearings: Single-row deep-groove ball
bearing.

Shaft seal

The pumps have a shaft seal consisting of a primary
and a secondary shaft seal.

The material combination of the primary shaft seal of all
pump types is silicon carbide/silicon carbide. For the
secondary shaft seal, the mateial combination is silicon
carbide/carbon.

The shaft seals are placed in the oil chamber of the
pump. The oil chamber provides reliable sealing
between the pumped liquid and the motor.

The shaft seals have no springs or other parts in direct
contact with the pumped liquid. This prevents rags and
fibres from getting caught. The shaft seals are
bidirectional, meaning that they can operate in either
direction thus allowing for opposite rotation caused by
back-flow of liquid through the pump.

Motor

The motor is a watertight, totally encapsulated motor
with:

• insulation class H (356 °F (180 °C))

• temperature rise class F (221 °F (105 °C))

• enclosure class IP68.

For motor protection and sensors, see section Sensors
below.

Power cables

Standard cable

EMC cable

Control cable

The cables are 40 ft (15 m) long as standard. Other
cable lengths are available on request. See section List
of variants on page 13.

The number and dimension of cables depend on the
motor size.

TM04 2391 2508

Factory-set impeller clearance

Efficiency drop in %

Years

B

A

0

3

6

9

12

15

123 45

Cable type

[mm

2

]

Outer cable diameter

[inch (mm)]

Bending

radius

min. max. [inch (mm)]

4 x 6 0.62 (15.7) 0.68 (17. 2) 4.3 (110)

4 x 10 0.82 (20.9) 0.92 ( 23.4) 5.5 (140)

Cable type

[mm

2

]

Outer cable diameter

[inch (mm)]

Bending

radius

min. max. [inch (mm)]

3 x 6 0.54 (13.6) 0.6 (15.2) 3 (76)

3 x 10 0.7 (17.8) 0.78 (19.8) 3.9 (99)

Cable type

[mm

2

]

Outer cable diameter

[inch (mm)]

Bending

radius

min. max. [inch (mm)]

7 x 1.5 0.57 (14.4)

0.63 - 0.65

(16.0 - 16.4)

4 (100)

S_Range_58-60Hz.book Page 25 Thursday, July 8, 2010 2:30 PM

Product description

S pumps, range 58

26

Cable entry

Watertight PA or cast iron cable entry with soft shape
and sealing rings to prevent damage of the cable or
leaks.

Sensors

As standard the pump is equipped with:

• Three thermal switches (Klixon), one in each phase.

• One moisture switch in terminal block.

Customised sensor options

1. WIO (water-in-oil) sensor
The WIO sensor measures the water content in the
oil and converts the value into an analogue current
signal. The two sensor conductors are for power
supply as well as for carrying the signal to the mea­suring device or controller. The sensor measures
the water content from 0 to 20 %. It also sends a
signal if the water content is outside the normal
range (warning), or if there is air in the oil chamber
(alarm). The sensor is fitted in a stainless steel tube
for mechanical protection.
The WIO sensor is connected to the Grundfos
IO 111 module.

2. Bearing temperature sensor.

Tes ting

All pumps are tested before leaving the factory. The
factory test report is based on ANSI-HI centrifugal
pump test 1.6-2000, Acceptance level B. Test reports
can be ordered directly with the pump or can be ordered
separately based on the pump serial number.

Other tests or third party inspection certificates are
available on request including HI B & A standards.
See section List of variants on page 13.

Operating conditions

Pumps without cooling jacket in submerged
installation:

• Continuous operation when pump is fully sub­merged to top of motor.

• Intermittent operation with max. 20 starts per hour
when pump is submerged to middle of motor and
with short periods of operation down to the top of
the pump housing
Note: Explosion proof pumps must always be fully
submerged

Pumps with cooling jacket in submerged and dry
installation:

• Continuous and intermittent operation with max. 20
starts per hour with water level down to the top of
the pump housing.

Pumped liquids

pH value: 4-10

Liquid temperature: 32 °F - 104 °F (0 °C - +40 °C)

When pumping liquids with a density and/or a kinematic
viscosity higher than that of water, use motors with
correspondingly higher outputs.

Sound pressure

The sound pressure level of the pump is lower than the
limiting values stated in the EC Council directive 2006/
42/EC relating to machinery (the EC Machinery
Directive).

Motor range

Shaft power [hp (kW)] No. of poles

34 (25) 4

42 (32) 4

S_Range_58-60Hz.book Page 26 Thursday, July 8, 2010 2:30 PM

Product description

S pumps, range 58

27

Explosion-proof pumps

Approval standards

These pumps are approved by FM according to
FM3600, FM3615 and FM3615.80.

Explanation to FM approval

The S pumps have the following explosion protection
classification: Class I, Division 1, Groups C and D, T4,
T3, IP68

Pump controllers

S pumps, range 58, can be controlled by Grundfos
Dedicated Controls (DC).

The Grundfos Dedicated Controls system can control
from one to six pumps.

The Dedicated Controls system starts/stops the S
pumps by means of:

• float switches,

• pressure sensor or

• ultrasonic sensor.

Furthermore, it is possible to control the water level by
both float switches and an analog pressure sensor or
ultrasonic sensor.

Optionally, it can control a mixer and/or a flush valve.
The Dedicated Controls system can be extended with
an IO 111 module per pump (for S pumps with built-in
analog sensor).

For further settings, see the installation and operating
instructions for the pump controller selected.

Standards Code Description

FM3600
FM3615
FM3615.80

Class I Explosive atmosphere is

caused by gas or
vapours.

Division 1 Area classification

Groups C
and D

Classification of gases

T4/T3 Maximum surface

temperature is 275 °F
(135 °C) and 392 °F
(200 °C)

IP68 Enclosure class

according to IEC 60529.

S_Range_58-60Hz.book Page 27 Thursday, July 8, 2010 2:30 PM

Product description

S pumps, range 58

28

Wiring diagrams

Fig. 15 Wiring diagrams, Y-connected (460 V)

TM04 6719 0 810

Sensors

Thermal switch

Moisture switches

PT100 lower bearing

PT100 stator

Thermistor

Power cable

Motor

S_Range_58-60Hz.book Page 28 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

29

Curve charts/
Technical data

The following many pages are divided into sections:

How to read the curve charts

Pages 29 and 30 A brief explanation of how to read the curve charts, the curve conditions, etc.

Performance curves and technical data:

Page 34 Extra-low pressure
Page 36 Low pressure
Page 38 Medium pressure
Page 40 High pressure

TM04 6573 0610

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 26002800 3000

Q [US GPM]

0

10

20

30

40

50

60

70

80

90

[ft]

H

0 20 40 60 80 100 120 140 160 180 200 220

Q [l/s]

0

5

10

15

20

25

[m]

H

0

10

20

30

40

[ft]

NPSH

58L.S

60 Hz

ISO 9906 Annex A

S1.45.A80.420.4.

S

1

.

4

5

.

A

8

0

.

4

2

0

.

4

.

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 26002800 3000

Q [US GPM]

15

20

25

30

35

40

45

[hp]

P2

15

20

25

30

[kW]

P2

S1.45.A80.420.4.

Pump type:

58: Range 58
L: Pressure range (Low pressure)
S: Installat ion type

Total pump head
H = H

total

The power curves indicate
shaft power [P

2

] for the

pumps shown

Max. efficiency mark

QH curve for the
individual pump.

NPSH curve for all
variants shown. When
sizing the pumps, add a
safety margin of at least

1.6 ft (0.5 m).

S_Range_58-60Hz.book Page 29 Thursday, July 8, 2010 2:30 PM

Curve charts/
Technical

S pumps, range 58

30

Curve conditions

The guidelines below apply to the curves shown in the
performance charts on page 32 to page 40.

• ANSI-HI centrifugal pump test 1.6-2000, Accep­tance level B.

• The curves show pump performance with different
impeller diameters at rated speed.

• The bold part of the curves show the recom-
mended operating range.

• The curves apply to the pumping of airless water at
a temperature of 68 °F (+20 °C) and a kinematic vis­cosity of 1 cSt (1 mm2/s).

• NPSH: The curves show average values measured
under the same conditions as the performance
curves.
When dimensioning the pump, add a safety margin
of at least 1.6 ft (0.5 m).

• In case of other densities than 133.5 ounces/gallon
(1000 kg/m

3

), the discharge pressure is proportional

to the density.

• When pumping liquids with a density higher than

133.5 ounces/gallon (1000 kg/m

3

), motors with cor-

respondingly higher outputs must be used.

Calculation of total head

The total pump head consists of the height difference
between the measuring points + the differential head +
the dynamic head.

Performance tests

The requested duty point for every pump is tested
according to ISO 9906, Annex A, and without certifica­tion.

In case of pumps ordered on the basis of impeller diam­eter only (no requested duty point), the pump will be
tested close to the best efficiency point (BEP) of the
published performance curve which is related to the
ordered impeller diameter (according to ISO 9906,
Annex A).

If the customer requires either more points on the curve
to be checked or certain minimum performances or cer­tificates, individual measurements must be made, and
a certificate can be ordered.

Certificates

Certificates have to be confirmed for every order and
are available on request as follows:

• Certificate of compliance with the order
(EN 10204 - 2.1)

• Pump test sheet.

Witness test

When the pumps are being tested or are tested with a
certification it is possible for the customer to witness the
testing procedure according to ISO 9906.

The witness test is not a certificate and will not result in
a written statement from Grundfos. The witness itself is
the only guarantee that everything is carried out as pre­scribed in the testing procedure.

If the customer wants to witness test the pump perfor­mance, place this request on the order.

H

geo

: Height difference between measuring points.

H

stat

: Differential head between suction and the dis-

charge side of the pump.

H

dyn

: Calculated values based on the velocity of the

pumped liquid on the suction and the discharge
side of the pump.

H

total

H

geoHstatHdyn

++=

S_Range_58-60Hz.book Page 30 Thursday, July 8, 2010 2:30 PM

31

S_Range_58-60Hz.book Page 31 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

32

Performance curves
Technical data

S 58 extra-low pressure, 6-pole

S2.40.A120.340

TM04 6836 0610

500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Q [US GPM]

0

5

10

15

20

25

30

35

40

45

[ft]

H

50 100 150 200 250 300 350

Q [l/s]

0

2

4

6

8

10

12

14

[m]

H

0

10

20

30

[ft]

NPSH

58E.S

60 Hz

ISO 9906 Annex A

S2.40.A120.340.6.

S2.40.A120.340.6.

500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Q [US GPM]

10

15

20

25

30

35

[hp]

P2

10

15

20

25

[kW]

P2

S2.40.A120.340.6.

S_Range_58-60Hz.book Page 32 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

33

Electrical data

Note: Enclosure class: IP68

Pump data

* With 50 ft (15 m) cable

Pump type

P1

[kW]

P2

[hp]

No. of

poles

RPM

Starting

method

I

NIstartηmotor

[%]

Cos ϕ

Moment of

inertia

[lbft2 (kgm

2

]

Breakdown

torque M

max

[lbf*ft (Nm)]

[A] [A] 1/2 3/4 1/1 1/2 3/4 1/1

S2.40.A12 0.340.6.58 E 29 34 6 1160 Y/D 45 210 88 88 86 0.64 0.74 0. 82 3. 5 6 (0.15 ) 227.9 (309)

Pump type

Max. solids size Max. installation depth Weight *

[inch (mm)] [feet (m)] [lbs (kg)]

S2.40.A12 0.340.6.58E.S 4 (100) 66 (20) 1235 (56 0)

S2.40.A12 0.340.6.58E.C 4 (100) 66 (20) 1367 (620)

S2.40.A12 0.340.6.58E.D 4 (100) 66 (20) 1323 (600)

S2.40.A12 0.340.6.58E.H 4 (100) 66 (20) 1455 (660)

S_Range_58-60Hz.book Page 33 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

34

S 58 low pressure, 4-pole

S1.45.A80.420

TM04 6573 0610

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000

Q [US GPM]

0

10

20

30

40

50

60

70

80

90

[ft]

H

0 20 40 60 80 100 120 140 160 180 200 220

Q [l/s]

0

5

10

15

20

25

[m]

H

0

10

20

30

40

[ft]

NPSH

58L.S

60 Hz

ISO 9906 Annex A

S1.45.A80.420.4.

S

1

.

4

5

.

A

8

0

.

4

2

0

.

4

.

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000

Q [US GPM]

15

20

25

30

35

40

45

[hp]

P2

15

20

25

30

[kW]

P2

S1.45.A80.420.4.

TM04 6574 0610

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000

Q [US GPM]

0

10

20

30

40

50

60

70

80

90

[ft]

H

0 20 40 60 80 100 120 140 160 180 200 220

Q [l/s]

0

5

10

15

20

25

[m]

H

0

10

20

30

40

[ft]

NPSH

58L.C/D/H

60 Hz

ISO 9906 Annex A

S1.45.A80.420.4.

S

1

.

4

5

.

A

8

0

.

4

2

0

.

4

.

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000

Q [US GPM]

15

20

25

30

35

40

45

[hp]

P2

15

20

25

30

[kW]

P2

S1.45.A80.420.4.

S_Range_58-60Hz.book Page 34 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

35

Electrical data

Note: Enclosure class: IP68

Pump data

* With 50 ft (15 m) cable

Pump type

P1

[kW]

P2

[hp]

No. of

poles

RPM

Starting

method

I

NIstartηmotor

[%]

Cos ϕ

Moment of

inertia

[lbft2 (kgm

2

]

Breakdown

torque M

max

[lbf*ft (Nm)]

[A] [A] 1/2 3/4 1/1 1/2 3/4 1/1

S1.45.A80 .420. 4.58L 35 42 4 1 749 Y/D 52 284 89 90 88 0.75 0.82 0.85 3. 56 (0.15 ) 286.9 (389)

Pump type

Max. solids size Max. installation depth Weight *

[inch (mm)] [feet (m)] [lbs (kg)]

S1.45.A80.420.4.58L.S 4.5 (115) 66 (20) 1080 (490)

S1.45.A80.420.4.58L.C 4.5 (115) 66 (20) 1190 (540)

S1.45.A80.420.4.58L.D 4.5 (115) 66 (20) 1301 (590)

S1.45.A80.420.4.58L.H 4.5 (115) 66 (20) 1301 (590)

S_Range_58-60Hz.book Page 35 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

36

S 58 low pressure, 4-pole

S2.40.A80.420

TM04 6575 0610

400 800 1200 1600 2000 2400 2800 3200 3600 4000

Q [US GPM]

0

10

20

30

40

50

60

70

80

[ft]

H

40 80 120 160 200 240 280

Q [l/s]

0

5

10

15

20

25

[m]

H

0

10

20

30

40

[ft]

NPSH

58L.S

60 Hz

ISO 9906 Annex A

S2.40.A80.420.4.

S2.40.A80.420.4.

400 800 1200 1600 2000 2400 2800 3200 3600 4000

Q [US GPM]

15

20

25

30

35

40

[hp]

P2

15

20

25

30

[kW]

P2

S2.40.A80.420.4.

TM04 6576 6010

0 400 800 1200 1600 2000 2400 2800 3200 3600 4000

Q [US GPM]

0

10

20

30

40

50

60

70

80

90

[ft]

H

0 40 80 120 160 200 240

Q [l/s]

0

5

10

15

20

25

[m]

H

0

10

20

30

[ft]

NPSH

58L.C/D/H

60 Hz

ISO 9906 Annex A

S2.40.A80.420.4.

S2.40.A80.420.4.

0 400 800 1200 1600 2000 2400 2800 3200 3600 4000

Q [US GPM]

25

30

35

40

45

50

[hp]

P2

20

25

30

35

[kW]

P2

S2.40.A80.420.4.

S_Range_58-60Hz.book Page 36 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

37

Electrical data

Note: Enclosure class: IP68

Pump data

* With 50 ft (15 m) cable

Pump type

P1

[kW]

P2

[hp]

No. of

poles

RPM

Starting

method

I

NIstartηmotor

[%]

Cos ϕ

Moment of

inertia

[lbft2 (kgm

2

]

Breakdown

torque M

max

[lbf*ft (Nm)]

[A] [A] 1/2 3/4 1/1 1/2 3/4 1/1

S2.40.A80 .420. 4.58L 35 4 2 4 1749 Y/ D 52 284 89 90 8 8 0.75 0. 82 0.85 3. 56 (0.15 ) 286.9 (389)

Pump type

Max. solids size Max. installation depth Weight *

[inch (mm)] [feet (m)] [lbs (kg)]

S2.40.A80.420.4.58L.S 4 (100) 66 (20) 1080 (490)

S2.40.A80.420.4.58L.C 4 (100) 66 (20) 1190 (540)

S2.40.A80.420.4.58L.D 4 (100) 66 (20) 1301 (590)

S2.40.A80.420.4.58L.H 4 (100) 66 (20) 1301 (590)

S_Range_58-60Hz.book Page 37 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

38

S 58 medium pressure, 4-pole

S1.40.A50.420

TM04 6577 0610

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

Q [US GPM]

0

20

40

60

80

100

120

140

[ft]

H

0 20 40 60 80 100 120 140 160

Q [l/s]

0

10

20

30

40

[m]

H

0

10

20

30

40

50

[ft]

NPSH

58M.S

60 Hz

ISO 9906 Annex A

S1.40.A50.420.4.

S1.40.A50.420.4.

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

Q [US GPM]

15

20

25

30

35

40

[hp]

P2

15

20

25

30

[kW]

P2

S1.40.A50.420.4.

TM04 6578 0610

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

Q [US GPM]

0

20

40

60

80

100

120

140

[ft]

H

0 20 40 60 80 100 120 140 160

Q [l/s]

0

10

20

30

40

[m]

H

0

10

20

30

40

50

[ft]

NPSH

58M.C/D/H

60 Hz

ISO 9906 Annex A

S1.40.A50.420.4.

S1.40.A50.420.4.

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

Q [US GPM]

20

25

30

35

40

45

[hp]

P2

15

20

25

30

[kW]

P2

S1.40.A50.420.4.

S_Range_58-60Hz.book Page 38 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

39

Electrical data

Note: Enclosure class: IP68

Pump data

* With 50 ft (15 m) cable

Pump type

P1

[kW]

P2

[hp]

No. of

poles

RPM

Starting
method

I

NIstartηmotor

[%]

Cos ϕ

Moment of

inertia

[lbft2 (kgm

2

]

Breakdown

torque M

max

[lbf*ft (Nm)]

[A] [A] 1/2 3/4 1/1 1/2 3/4 1/1

S1.40.A50 .420. 4.58M 35 42 4 1749 Y/D 52 284 89 90 88 0.75 0.82 0.85 3. 56 (0.1 5 ) 28 6.9 (389)

Pump type

Max. solids size Max. installation depth Weight *

[inch (mm)] [feet (m)] [lbs (kg)]

S1.40.A50 .420. 4.58M .S 4 (100) 66 (20) 992 (450)

S1.40.A50.420.4.58M.C 4 (100) 66 (20) 1102 (500)

S1.40.A50.420.4.58M.D 4 (100) 66 (20) 1190 (540)

S1.40.A50.420.4.58M.H 4 (100) 66 (20) 1190 (540)

S_Range_58-60Hz.book Page 39 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

40

S 58 high pressure, 4-pole

S1.30.A50.340

TM04 6571 0610

0 100 200 300 400 500 600 700 800 900 1000 1100 1200

Q [US GPM]

0

20

40

60

80

100

120

140

160

180

[ft]

H

0 10 20 30 40 50 60 70 80

Q [l/s]

0

10

20

30

40

50

[m]

H

0

10

20

30

40

[ft]

NPSH

58H.S

60 Hz

ISO 9906 Annex A

S1.30.A50.340.4.

S1.30.A50.420.4.

S

1

.

3

0

.

A

5

0

.

3

4

0

.

4

.

S

1

.

3

0

.

A

5

0

.

4

2

0

.

4

.

0 100 200 300 400 500 600 700 800 900 1000 1100 1200

Q [US GPM]

10

15

20

25

30

35

40

[hp]

P2

10

15

20

25

[kW]

P2

S1.30.A50.340.4.

S1.30.A50.420.4.

TM04 6572 0610

0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300

Q [US GPM]

0

20

40

60

80

100

120

140

160

180

[ft]

H

0 10 20 30 40 50 60 70 80 90

Q [l/s]

0

10

20

30

40

50

[m]

H

0

10

20

30

40

[ft]

NPSH

58H.C/D/H

60 Hz

ISO 9906 Annex A

S1.30.A50.340.4.

S1.30.A50.420.4.

S

1

.

3

0

.

A

5

0

.

3

4

0

.

4

.

S

1

.

3

0

.

A

5

0

.

4

2

0

.

4

.

0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300

Q [US GPM]

15

20

25

30

35

40

45

[hp]

P2

15

20

25

30

[kW]

P2

S1.30.A50.340.4.

S1.30.A50.420.4.

S_Range_58-60Hz.book Page 40 Thursday, July 8, 2010 2:30 PM

Performance curves
Technical data

S pumps, range 58

41

Electrical data

Note: Enclosure class: IP68

Pump data

* With 50 ft (15 m) cable

Pump type

P1

[kW]

P2

[hp]

No. of

poles

RPM

Starting
method

I

NIstartηmotor

[%]

Cos ϕ

Moment of

inertia

[lbft2 (kgm

2

]

Breakdown

torque M

max

[lbf*ft (Nm)]

[A] [A] 1/2 3/4 1/1 1/2 3/4 1/1

S1.30.A50 .340. 4.58H 3 1 34 4 1752 Y/D 47 284 88 90 89 0.73 0.80 0.84 3. 56 (0.15 ) 286.9 (389 )

S1.30.A50 .420. 4.58H 3 6 42 4 1746 Y/D 54 284 89 90 88 0.75 0.82 0.85 3. 56 (0.15 ) 286.9 (389 )

Pump type

Max. solids size Max. installation depth Weight *

[inch (mm)] [feet (m)] [lbs (kg)]

S1.30.A50 .340. 4.58H .S 3 (80) 66 (20) 970 (440)

S1.30.A50 .340. 4.58H .C 3 (80) 66 (20 ) 1058 (480)

S1.30.A50.340.4.58H.D 3 (80) 66 (20) 1146 (520)

S1.30.A50.340.4.58H.H 3 (80) 66 (20) 1146 (520)

S1.30.A50 .420. 4.58H .S 3 (80) 66 (20) 970 (440)

S1.30.A50 .420. 4.58H .C 3 (80) 66 (20 ) 1058 (480)

S1.30.A50.420.4.58H.D 3 (80) 66 (20) 1146 (520)

S1.30.A50.420.4.58H.H 3 (80) 66 (20) 1146 (520)

S_Range_58-60Hz.book Page 41 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

42

Accessories

Accessories (for installation)

* Installation type S and C p umps with discharge flange size NPS 10" (DN 250) and higher are supplied with guide claw mounted on the flange.

Pump type Installation accessories

S 50-70 S and C NPS 3-8 (DN 80-200) without guide claw (guide claw included in auto-coupling kit)

S 50-70 S and C NPS 10-24 (DN 250-600) with guide claw mounted on the pump

S 50-70 D Pump without installation accessories (accessories as separate kit)

S 50-70 H Base stand for horizontal, dry in stallation supplie d together with t he pump

Pictures Description Size

Weight

[lb (kg)]

PN

Product
number

GR8126

Cast-iron, epoxy -coated auto-coupling system complete
with:

• guide claw *

• base unit

• upper guide rail bracket

• gaskets and bolts.

Discharge flange

NPS 8" (DN 200)

617.3
(280)

10 97506541

NPS 5"/NPS 6"

(DN 125/150)

229.28
(104)

10 97626242

NPS 12"
(DN 300)

738.5
(335)

10 97510049

Intermediate g uide rail bracket For guide rails longer than 19 .5 feet (6 m)

NPS 5"/NPS 6"

(DN 125/DN150)

6.6 (3) 96829331

NPS 8" / NPS 24"
(DN 200/DN 600)

17.6 (8) 96255842

Guide rails Standard pipes. Not su pplied by Grundf os

Stand/pump discharge - hose

TM02 8856 0904 -

TM02 8857 0904

Cast iron, epoxy-coated ring stand.
Supplied with b olts, nuts, gaskets and anchor bolts.

NPS 4" / NPS3"

(DN 100 / DN 80)

10 96856259

NPS 5" (DN 130) 10 96856262

NPS 8" (DN 200) 10 96790704

TM04 4035 0509

Vertical base stand (without bend).

Suction flange

NPS 6"

(DN150)

96308238

NPS 8"

(DN 200)

96094523

NPS 10"

(DN250)

96856263

TM04 4156 0909

Galvanised steel base stand for horizontal, dry installa­tion.
Supplied with bolts, gaskets and anchor bolts.

NPS 6"

(DN150)

96782930

NPS 8"

(DN 200)

96784437

NPS 10"

(DN250)

96856265

S_Range_58-60Hz.book Page 42 Thursday, July 8, 2010 2:30 PM

Accessories

S pumps, range 58

43

Other accessories

Pictures Descript ion Dimensions

Product
number

TM02 6126 5102

13 ft (4 m) galvanised lifting chain with lifting link and safety hook.
With certificates.

Max. 1763 lbs

(800 kg)

S 34-58

96735550

20 ft (6 m) galvanised lifting chain with lifting link and safety hook.
With certificates.

96735553

26 ft (8 m) galvanised lifting chain with lifting link and safety hook.
With certificates.

96735554

33 ft (10 m) galvanised lifting chain with lifting link and safety hook.
With certificates.

96735556

40 ft (12 m) galvanised lifting chain with lifting link and safety hook.
With certificates.

96735557

13 ft (4 m) stainless steel lifting chain with lifting link and safety hook.
With certificates.

Max. 1763 lbs

(800 kg)

S 34-58

96735559

20 ft (6 m) stainless steel lifting chain with lifting link and safety hook.
With certificates.

96735564

26 ft (8 m) stainless steel lifting chain with lifting link and safety hook.
With certificates.

96735566

33 ft (10 m) stainless steel lifting chain with lifting link and safety hook.
With certificates.

96735567

40 ft (12 m) stainless steel lifting chain with lifting link and safety hook.
With certificates.

96735569

TM01 6982 3999

Float switch with 33 ft (10 m) cable 96003332

Float switch with 66 ft (20 m) cable 96003695

TM02 8862 0904

Bracket for two float switches 96003338

TM02 0670 5000

Float switches with bracket, 33 ft (10 m) cable

2 switches, 1 pu mp without alarm 62500013

3 switches, 1 pu mp with alarm 62500014

3 switches, 2 pu mps with alarm 62500014

4 switches, 2 pu mps with alarm 62500015

S_Range_58-60Hz.book Page 43 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

44

Dimensions

Installation on auto coupling

Fig. 16 Dimensional sketches, installation on auto-coupling system

Z12a is minimum recom mended distance from pit bottom to bottom of pump suction side.

Z11 is total height of pump installed on Gru ndfos installation accessory in the pit. NOTE: This figure might not equal Z12a + Z1.

Note:

TM04 2417 2508

Z14

Z17 G/S

Min. level,

installation S

Min. level, instal-

lation C

S_Range_58-60Hz.book Page 44 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

45

S pumps, range 58 [inch]

ZM

4XM16

4XM16

4XM16

ZL2

5.8

5.8

5.8

ZL1

22.5

22.5

22.5

ZDt1

1.0

1.0

1.0

ZDN1

6"

6"

6"

ZDc1

9.4

9.4

9.4

Z17

S

0.1

0.1

0.1

G

0.1

0.1

0.1

Z16

22.6

22.6

22.6

Z15

11. 0

11. 0

11. 0

Z14

---

Z13

---

Z12b

15.7

15.7

15.7

Z12a

3.1

3.1

3.9

Z11

55.2

55.2

55.6

Z10

3.5

3.5

3.5

Z9

4.3

4.3

4.3

Z8

26.7

26.7

25.9

Z7

35.5

35.5

34.7

Z6

47.9

47.9

47.1

Z4

11.0

11.0

11.0

Z3

4.8

4.8

4.8

Z2

11.8

11.8

11.8

Z1

47.3

47.3

48.7

ZØ1

8X23

8X23

8X23

F

17.7

17.7

18.2

C

25.4

25.4

24.6

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.40.A50.420.4.58M

S pumps, range 58 [mm]

ZM

4XM16

4XM16

4XM16

ZL2

147

147

147

ZL1

571

571

571

ZDt1

252525

ZDN1

6"

6"

6"

ZDc1

240

240

240

Z17

S

3.0

3.0

3.0

G

3.0

3.0

3.0

Z16

575

575

575

Z15

280

280

280

Z14

---

Z13

---

Z12b

400

400

400

Z12a

80

80

100

Z11

1402

1402

1411

Z10

88.0

88.0

88.0

Z9

110

110

110

Z8

678

678

657

Z7

902

902

882

Z6

1216

1216

119 6

Z4

280

280

280

Z3

123

123

123

Z2

300

300

300

Z1

1202

1202

1236

ZØ1

8X23

8X23

8X23

F

450

450

462

C

645

645

625

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.40.A50.420.4.58M

S_Range_58-60Hz.book Page 45 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

46

Fig. 17 Dimensional sketches, installation on auto-coupling system

Z12a is minimum recommended distance from pit bottom to bottom of pump suction side.

Z11 is total height of pump installed on Grundfos installation accessory in the pit. NOTE: This figure migh t not equal Z12a + Z1.

Note:

TM04 2416 2508

Z17 G/S

Min, level,

installation S

Min. level,

installation C

S_Range_58-60Hz.book Page 46 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

47

S pumps, range 58 [inch]

ZM

4XM24

4XM24

4XM24

ZL2

8.7

8.7

8.7

ZL1

30.0

30.0

35.5

ZDt1

1.2

1.2

1.3

ZDN1

8"

8"

12"

ZDc1

11. 6

11. 6

15.7

Z17

S

0.1

0.1

0.1

G

0.1

0.1

0.1

Z16

19.1

19.1

25.6

Z15

14.4

14.4

17.7

Z14

3.4

3.4

3.7

Z13

5.9

5.9

5.9

Z12b

7.7

7.7

10.1

Z12a

5.2

5.2

6.1

Z11

54.4

54.4

55.8

Z10

3.5

3.5

3.5

Z9

6.7

6.7

6.7

Z8

37.1

37.1

41.0

Z7

48.3

48.3

57.1

Z6

62.8

62.8

77.1

Z4

21.1

21.1

26.4

Z3

7.9

7.9

7.9

Z2

16.9

16.9

21.7

Z1

49.2

49.2

49.7

ZØ1

8X23

8X23

12X23

F

26.8

26.8

32.6

C

32.9

32.9

41.7

Pump type

S1.45.A80.420.4.58L

S2.40.A80.420.4.58L

S2.40.A120.340.6.58E

S pumps, range 58 [mm]

ZM

4XM24

4XM24

4XM24

ZL2

222

222

222

ZL1

761

761

901

ZDt1

31

31

32

ZDN1

8"

8"

12"

ZDc1

295

295

400

Z17

S

3.0

3.0

3.0

G

3.0

3.0

3.0

Z16

485

485

650

Z15

365

365

450

Z14

868695

Z13

150

150

150

Z12b

196

196

256

Z12a

131

131

156

Z11

1381

1381

1418

Z10

88.0

88.0

88.0

Z9

170

170

170

Z8

942

942

1042

Z7

1227

1227

1450

Z6

1596

1596

1959

Z4

535

535

670

Z3

200

200

200

Z2

430

430

551

Z1

1250

1250

1262

ZØ1

8X23

8X23

12X23

F

680

680

828

C

835

835

1058

Pump type

S1.45.A80.420 .4.58L

S2.40.A80.420 .4.58L

S2.40.A120.340.6.58E

S_Range_58-60Hz.book Page 47 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

48

Installation on ring stand

Fig. 18 Dimensional sketch, installation on ring stand

TM04 2420 2508

HCL

S_Range_58-60Hz.book Page 48 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

49

S pumps, range 50 [inch]

F

17.7

17.7

26.8

18.2

26.8

32.6

D

9.3

9.3

15.0

9.3

15.0

18.4

DSTH

8.3

8.3

8.3

8.3

8.3

8.9

HCL

11. 4

11. 4

16.5

11. 4

16.5

24.5

HCH

11. 0

11. 0

17.1

11. 0

17.1

23.6

Y5

21.7

21.7

21.7

21.7

21.7

27.6

Y4

38.8

38.8

48.9

38.0

48.9

63.9

Y3

27.2

27.2

33.9

28.1

33.9

42.4

Y2

16.1

16.1

16.7

17.1

16.7

18.7

Y1

55.6

55.6

57.5

56.9

57.5

58.6

Y Ø 2

0.2

0.2

8.1

0.2

8.1

0.5

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.45.A80.420.4.58L

S1.40.A50.420.4.58M

S2.40.A80.420.4.58L

S2.40.A120.340.6.58E

S pumps, range 50 [mm]

F

450

450

680

462

680

828

D

237

237

380

237

380

468

DSTH

210

210

210

210

210

226

HCL

289

289

418

289

418

622

HCH

280

280

435

280

435

600

Y5

550

550

550

550

550

700

Y4

985

985

1243

964

1243

1622

Y3

690

690

860

715

860

1.076

Y2

410

410

425

435

425

476

Y1

1412

1412

1460

1446

1460

1488

Y Ø 2

6

6

2056205

12

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.45.A80.420.4.58L

S1.40.A50.420.4.58M

S2.40.A80.420.4.58L

S2.40.A120.340.6.58E

S_Range_58-60Hz.book Page 49 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

50

Dry pit, vertical installation

Fig. 19 Dimensional sketch, dry, vertical installation

TM04 2422 2508

X13

X131

S_Range_58-60Hz.book Page 50 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

51

S pumps, range 58 [inch]

XM1

M20X6

M20X6

M24X6

M20X6

M24X6

M24X6

Dt2

0.9

0.9

1.0

0.9

1.0

1.3

XDt1

0.9

0.9

1.1

1.0

1.1

1.1

XDc3

9.4

9.4

14.3

11. 6

14.3

14.3

X17

33.6

33.6

43.5

38.6

43.5

44.8

X16

73.0

73.0

84.3

78.4

84.3

84.6

X132

4.7

4.7

5.9

4.7

5.9

5.9

X131

5.9

5.9

7.9

6.9

7.9

7.9

X13

17.7

17.7

23.6

20.7

23.6

23.6

X10

6"

6"

10"8"10"

10"

X6

24.4

24.4

33.7

28.3

33.7

33.7

X5

11. 7

11. 7

16.7

13.5

16.7

16.7

X4

11. 8

11. 8

15.7

13.8

15.7

15.7

XØ5

0.9

0.9

1.1

0.9

1.1

1.1

XØ3

0.9

0.9

0.9

0.9

0.9

0.9

F

17.7

17.7

26.8

18.2

26.8

32.6

C

25.4

25.4

32.9

24.6

32.9

41.7

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.45.A80.420.4.58L

S1.40.A50.420.4.58M

S2.40.A80.420.4.58L

S2.40.A120.340.6.58E

S pumps, range 58 [mm]

XM1

M20X6

M20X6

M24X6

M20X6

M24X6

M24X6

Dt2

2222262226

33

XDt1

2424282628

28

XDc3

240

240

362

295

362

362

X17

853

853

1106

981

1106

113 9

X16

1855

1855

2141

1992

2141

2150

X132

120

120

150

120

150

150

X131

150

150

200

175

200

200

X13

450

450

600

525

600

600

X10

6"

6"

10"8"10"

10"

X6

621

621

857

719

857

857

X5

296

296

425

344

425

425

X4

300

300

400

350

400

400

XØ5

2424282428

28

XØ3

2424242424

24

F

450

450

680

462

680

828

C

645

645

835

625

835

1058

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.45.A80.420 .4.58L

S1.40.A50.420.4.58M

S2.40.A80.420 .4.58L

S2.40.A120.340.6.58E

S_Range_58-60Hz.book Page 51 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

52

Dry pit, horisontal installation

Fig. 20 Dimensional sketch, dry, horisontal installation

TM04 2414 2508

QZ1

S_Range_58-60Hz.book Page 52 Thursday, July 8, 2010 2:30 PM

Dimensions

S pumps, range 58

53

S pumps, range 58 [inch]

Dt2

0.9

0.9

1.0

0.9

1.0

1.3

Dc2

8.5

8.5

11. 7

8.5

11. 7

17.0

DØ2

0.9

0.9

0.9

0.9

0.9

0.9

D2N

5"5"8"5"8"

12"

D2N

88888

12

QZ1

0.7

0.7

0.7

0.7

0.7

0.7

QØ1

M20

M20

M20

M20

M20

M20

D1N

8

8128

12

12

DN1

6"

6"

10"8"10"

10"

QDc1

9.4

9.4

14.3

11.7

14.3

14.3

Q10

32.1

32.1

32.1

32.1

32.1

32.1

Q8

15.4

15.4

15.4

15.4

15.4

15.4

Q6

19.7

19.7

19.7

19.7

19.7

19.7

Q5

4.5

4.5

4.5

4.5

4.5

4.5

Q4

14.8

14.8

21.7

14.8

21.7

21.7

Q3

31.3

31.3

43.3

30.5

43.3

47.2

Q2

9.8

9.8

10.5

11. 0

10.5

11. 8

Q1

49.3

49.3

51.3

50.8

51.3

51.6

QØ3

0.7

0.7

0.7

0.7

0.7

0.7

F

17.7

17.7

26.8

18.2

26.8

32.6

D

9.3

9.3

15.0

9.3

15.0

18.4

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.45.A80.420.4.58L

S1.40.A50.420.4.58M

S2.40.A80.420.4.58L

S2.40.A120.340.6.58E

S pumps, range 58 [mm]

Dt2

2222262226

33

Dc2

216

216

298

216

298

432

DØ2

2222242224

24

D2N

5"5"8"5"8"

12"

D2N

88888

12

QZ1

1818181818

18

QØ1

M20

M20

M20

M20

M20

M20

D1N

8

8128

12

12

DN1

6"

6"

10"8"10"

10"

QDc1

240

240

362

298

362

362

Q10

815

815

815

815

815

815

Q8

390

390

390

390

390

390

Q6

500

500

500

500

500

500

Q5

115

115

115

115

115

115

Q4

375

375

550

375

550

550

Q3

796

796

110 0

775

110 0

1200

Q2

250

250

267

280

267

300

Q1

1252

1252

1302

1291

1302

1311

QØ3

1818181818

18

F

450

450

680

462

680

828

D

237

237

380

237

380

468

Pump type

S1.30.A50.340.4.58H

S1.30.A50.420.4.58H

S1.45.A80.420.4.58L

S1.40.A50.420.4.58M

S2.40.A80.420.4.58L

S2.40.A120.340.6.58E

S_Range_58-60Hz.book Page 53 Thursday, July 8, 2010 2:30 PM

S pumps, range 58

54

Further product
documentation

WebCAPS

WebCAPS is a Web-based Computer Aided Product
Selection program available on www.grundfos.com.

WebCAPS contains detailed information on more than
185,000 Grundfos products in more than 20 languages.

In WebCAPS, all information is divided into 6 sections:

• Catalogue

• Literature

• Service

• Sizing

• Replacement

• CAD drawings.

Catalogue

This section is based on fields of application and pump types,
and contains

• technical data

• curves (QH, Eta, P1, P2, etc) which c an be adapted to th e den­sity and visco sity of the pumped liquid and show the number of
pumps in operation

• product photos

• dimensional drawings

• wiring diagrams

• quotation texts, etc.

Literature

In this section you can access all the latest documents of a given
pump, such as

• data booklets

• installation and operating instructions

• service documentation, such as Service kit catalogue and
Service kit instruction s

• quick guides

• product brochures, etc.

Service

This section contains an easy-to-use interactive service cata­logue. Here you can find and identify service parts of both
existing and discontinued Grundfos pumps.
Furthermore, this section contains service videos showing you
how to replace service parts.

S_Range_58-60Hz.book Page 54 Thursday, July 8, 2010 2:30 PM

Further product
documentation

S pumps, range 58

55

WinCAPS

Fig. 21 WinCAPS CD-ROM

WinCAPS is a Windows-based Computer Aided Prod-
uct Selection program containing detailed information
on more than 185,000 Grundfos products in more than
20 languages.

The program contains the same features and functions
as WebCAPS, but is an ideal solution if no Internet con­nection is available.

WinCAPS is available on CD-ROM and updated once a
year.

Sizing

This section is based on different fields of application and installa­tion examples, and gives easy step-by-step instructions in how to

• select the most suitable and efficient pump for your installation

• carry out advanced calculations based on energy consumption,
payback periods, load profiles, life cycle co sts, etc.

• analyse your selec ted pump via the built-in life cycle cost tool

• determine the flow velocity in wastewater applications, etc.

Replacement

In this section you find a guide to selecting and comparing re­placement data of an installed pum p in order to replace the pump
with a more efficient Grundfos pump.
The section contains replacement data of a wide range of pumps
produced by other manufacturers than Grundfos.

Based on an easy step-by-step guide, you can compare Grund­fos pumps with the one you have installed on your site. When
you have specified the installed pump, the guide will suggest a
number of Grundfos pumps which can improve both comfort and
efficiency.

CAD drawings

In this section it is possible to download 2-dimensional (2D) and
3-dimensional (3D) CAD drawings of most Grundfos pumps.

These formats are available in WebCAPS:

2-dimensional drawings:

• .dxf, wireframe drawings

• .dwg, wireframe drawings.

3-dimensional drawings:

• .dwg, wireframe drawings (without surfaces)

• .stp, solid drawings (with surfaces)

• .eprt, E-drawings.

01

Subject to alterations.

S_Range_58-60Hz.book Page 55 Thursday, July 8, 2010 2:30 PM

S_Range_50-60Hz.book Page 5 Thursday, July 8, 2010 11:35 AM