Groen DHT-40 INA/2, DHT-60 INA/2 General Manual

Cooker/Mixer

Description

Cooker/Mixer shall be a Groen Model DHT-40 or 60, INA/2
gallon (specify 40 or 60) stainless steel, self-contained,
2/3 steam jacketed unit operating from a gas heated
steam source contained within unit and complete with
console mounted tilt out inclined agitator mixer.

Construction

Kettle interior shall be of 316 stainless steel, solid one­piece welded construction. The control console and kettle
exterior shall be 304 stainless steel. The kettle body shall
be mounted on a heavy duty stainless steel, combination
kettle support tilt trunnion which is supported by the pol­ished stainless steel enclosed base. The kettle shall be
furnished with heavy duty reinforced rim with a butterfly
shaped pouring lip for maximum sanitation and ease of
pouring. The base shall be provided with stainless steel
tubular legs with adjustable flanged feet. The enclosed
support base shall contain a self-locking worm and gear
tilt mechanism, controls, etc., and shall be of sanitary
drip-proof construction with interior readily accessible for
installation or maintenance. Unit includes 2” TDO and 10­gallon etch markings and double pantry faucet.

Finish

Interior of kettle shall be polished to a 180 emery grit
finish. Exterior of kettle shall be finished to a bright semi­deluxe finish, ensuring maximum ease in cleaning and
maintaining brilliant appearance.

Agitator Assembly

Agitator assembly to be designed to thoroughly fold and
blend product with gentle lifting action provided by agita­tor entering kettle body at an angle. Inclined agitator to be
stainless steel tubular frame, complete with shovel-type
scrapers. Agitator to be readily removable for ease of
cleaning and maximum sanitation.

Unit driven by a gear motor through an electronic vari­able speed control. Motor is completely enclosed-type
with a cast iron housing, helical bevel gearing and right
angle shaft down. Motor drive is mounted on a stainless
steel channel that manually hinges out to the right side
of kettle. Unit to be equipped with a spring assist for
agitator tilt-out. A positive quick-acting lock and latch
mechanism to be provided to secure the agitator when
it is in the kettle.

ASME Code & UL Listing

Unit shall be ASME shop inspected, stamped and reg­istered with the National Board for operation up to a
maximum working pressure of 50 PSI. Kettle is UL listed.
Kettle shall be design certified by CSA America for use
with natural gas or LP gas.

Sanitation

Unit shall be designed and constructed to meet NSF
requirements, and be NSF listed.

Self Contained Steam Source

Kettle shall have a gas heated (natural or propane) self­contained steam source to provide kettle temperatures
of 150°F to approximately 295°F. Unit shall be factory

models DHT-40 INA/2 & DHT-60 INA/2

Model DHT-40, INA/2 shown

charged with water and rust inhibitors to ensure long life
and minimum maintenance.

Controls

Controls shall include a thermostat, gas control valve with
pressure regulator, pressure gauge, water sight glass, gas
regulator valve, power ON switch, power ON indicator
light, low water indicator light, agitator ON-OFF switch,
motor speed control and double-pantry faucet with bracket.
Electronic ignition to standing pilot is standard on all models.

Agitator to be electronic, variable speed control-type capa­ble of operation at any RPM between minimum and maxi­mum settings.

Safety Features

Kettle shall have safety cut-off (cuts off heat when tilted to
10°F and above), pressure relief valve, high limit pressure
switch and low water cut off, 24V control system, and agi­tator safety tilt cut off.

Options/Accessories

Disk strainers (not to be used with agitator)
240, 480 Volt power supply (for agitator motor)
Kettle brush kit
Pan carrier
Gallon master
Basket insert
Lip strainers
Contour measuring strips

Installation Requirements

Specify natural or propane gas. Unit requires 1/2” NPT gas
line connection, 115 volt, 60Hz power for kettle and 208
volt (3-phase only) power for agitator motor. No remote
steam source required.

Origin of Manufacture

Cooker/Mixer shall be designed and manufactured in the
United States.

Stainless Steel
2/3 Steam Jacketed
Cooker/Mixer

Floor Mounted
Tilting
Self-Contained
Gas Heated
40 and 60-Gallon
Capacities With
Inclined Agitator

Short Form

Groen Model DHT-40 or 60,
INA/2 (specify gallons) self­contained, tilting, gas heated,
stainless steel 2/3 steam jack­eted cooker/mixer with twin
inclined agitator scraper mixer.
Base shall house, positive lock,
smooth-action, manual-tilt
assembly. 316 stainless steel
kettle interior has solid, one­piece, welded construction
with heavy-duty reinforced rim
and butterfly-shaped pouring
lip. Inclined agitator mounted
on console with mechanically
assisted manual tilt-out and
positive quick action rim lock
and latch. Unit is standard
with 2” TDO valve and etch
marks. Kettle is NSF and UL
Listed, ASME code constructed
for 50 PSI. Standard 208 volt,
3-phase for kettle, 208 volt,
3-phase for agitator motor.
Made in USA.

Applications

Meats
Soups
Stews
Sauces
Pie fillings
Pudding
Beans
Powdered mixes
Icings
Custards

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Groen Cooker/Mixer, Page 4

149005C

Revised 08/09

Models DHT-40 INA/2 & DHT-60 INA/2

P/N 146930 REV A

40

GAL

60

GAL

AGITATOR MOTOR DATA SPECIFICATIONS

RPM MAIN

MAXIMUM

H.P.

1-1/2

MINIMUM

MAXIMUM

MINIMUM

D

A-I.D.

2

1

B

2

54

46

23

RPM SECONDARY

3 3/4

(94)

1 1/4

(32)

TABLE OF DIMENSIONS

150

753/4 27

120

60

MODEL

DIM.

40 GAL.

150 L 230 L

INCH MM

A

26

28-1/2

B

31

C

48

D

58-7/8

E

39-1/2

F

11-1/4

G

30-1/2

J

K

6-7/8 8-7/8

L

14-1/4

M

660

724

787

1219

1495

1003

286

775

1984 2067

175 225

362 314

NOTES:

1. ELECTRICAL POWER CONNECTIONS, KETTLE
1-3/4" DIAMETER HOLE.

2. ELECTRICAL POWER CONNECTION, AGITATOR
1-3/4" DIAMETER HOLE.

60 GAL.

INCH

30

31-5/8

33

54

62-1/8

42-3/4

14-1/2

35-1/2

81-3/878-1/8

12-3/8

MM

762

803

838

1372

1578

1086

368

902

TANGENT DRAWOFF

(OPTIONAL)

3. AGITATOR MOTOR SPEED SELECTOR SWITCH.

2"

4. CONTROL BOX MAY BE REMOTELY MOUNTED
(BY CUSTOMER) IF DESIRED.

WALL

E

3

K

6 (152) MIN.
REAR WALL
CLERANCE

F

26 1/4

L

1

6 1/2
(165)

KETTLE IN

TILTED

POSITION

M

G

J

29 (737)

C

4

9 1/2

146930 (REV. A)

9 1/4
(235)

6 (152) MIN.
REAR WALL
CLERANCE

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.