Grizzly G0575 User Manual

MACHINE DATA

SHEET

Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]

MODEL G0575 10" TABLE SAW 1-1/2 HP SINGLE-PHASE

110V LEFT-TILT

Product Dimensions:

Weight.............................................................................................................................................................. 266 lbs.

Length/Width/Height.......................................................................................................................57 x 48-1/2 x 41 in.

Foot Print (Length/Width)........................................................................................................................ 25-1/2 x 21 in

Shipping Dimensions:

Carton #1

Type...............................................................................................................................................Not Available

Content..................................................................................................................................................Machine

Weight.......................................................................................................................................................... N/A

Length/Width/Height................................................................................................................. N/A x N/A x N/A

Carton #2

Type...............................................................................................................................................Not Available

Content......................................................................................................................................................Fence

Weight.......................................................................................................................................................... N/A

Length/Width/Height................................................................................................................. N/A x N/A x N/A

Electrical:

Switch............................................................................................................................................ On/Off Push Button

Switch Voltage...............................................................................................................................................110/220V

Cord Length.......................................................................................................................................................... 10 ft.

Cord Gauge....................................................................................................................................................14 gauge

Minimum Circuit Size............................................................................................20 amps at 110V, 10 amps at 220V

Plug Included.......................................................................................................................................................... Yes

Motors:

Main

Type..................................................................................................................TEFC Capacitor Start Induction

Horsepower...........................................................................................................................................1-1/2 HP

Voltage.................................................................................................................................................110/220V

Prewired......................................................................................................................................................110V

Phase........................................................................................................................................................Single

Amps..........................................................................................................................................................18/9A

Speed.................................................................................................................................................3450 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ...................................................................................................................................Belt Drive

Bearings.......................................................................................................................Shielded and Lubricated

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3Model G0575

Main Specifications:

Blade Information

Maximum Blade Diameter..........................................................................................................................10 in.

Maximum Width Of Dado......................................................................................................................13/16 in.

Blade Tilt.......................................................................................................................................Left 0-45 deg.

Arbor Size..................................................................................................................................................5/8 in.

Arbor Speed.......................................................................................................................................4250 RPM

Arbor Bearings...........................................................................................Sealed and Permanently Lubricated

Rim Speed........................................................................................................................................11000 FPM

Cutting Capacities

Maximum Depth Of Cut At 90 Degrees..................................................................................................3-1/8 in.

Maximum Depth Of Cut At 45 Degrees..................................................................................................2-1/8 in.

Maximum Rip To Right Of Blade-Standard................................................................................................30 in.

Maximum Rip To Right Of Blade-Optional.................................................................................................50 in.

Maximum Rip To Left Of Blade............................................................................................................10-1/2 in.

Table Information

Floor To Table Height.................................................................................................................................35 in.

Table Size Length...................................................................................................................................... 27 in.

Table Size Width..................................................................................................................................20-1/8 in.

Table Size Thickness...........................................................................................................................1-9/16 in.

Table Size With Extension Wings Length.................................................................................................. 27 in.

Table Size With Extension Wings Width..............................................................................................39-5/8 in.

Table Size With Extension Wings Thickness.......................................................................................1-9/16 in.

Distance Front Of Table To Center Of Blade.............................................................................................16 in.

Distance Front Of Table to Blade At Maximum Cut................................................................................... 11 in.

Fence Information

Fence Type...............................................................................................................SHOP FOX Aluma-Classic

Fence Size Length...............................................................................................................................42-1/2 in.

Fence Size Width...............................................................................................................................3-15/16 in.

Fence Size Height................................................................................................................................2-7/16 in.

Fence Rail Type.........................................................................................................Angle Iron/Square Tubing

Fence Rail Length......................................................................................................................................57 in.

Fence Rail Width..........................................................................................................................................2 in.

Fence Rail Height.........................................................................................................................................2 in.

Miter Gauge Information

Miter Gauge Slot Type...............................................................................................................................T-Slot

Miter Gauge Slot Size Width.....................................................................................................................3/4 in.

Mither Gauge Slot Size Height..................................................................................................................3/8 in.

Construction

Table Construction...................................................................................................Precision Ground Cast Iron

Wings Construction..........................................................................................................................Sheet Metal

Trunnions Construction........................................................................................................................ Cast Iron

Base Construction.................................................................................................................. Pre-Formed Steel

Body Assembly Contruction....................................................................................................Pre-Formed Steel

Fence Assembly Construction.........................................................................Steel with Aluminum Side Plates

Rails Construction...............................................................................................................................Angle Iron

Miter Guage Construction............................................................................................. Cast Iron with Steel Bar

Guard Construction.........................................................................................................Steel and Clear Plastic

Other Related Information

Paint...........................................................................................................................................Powder Coated

Number Of Dust Ports.......................................................................................................................................1

Dust Port Size.............................................................................................................................................. 4 in.

Long Rails.................................................................................................................................................H5744

Mobile Base..............................................................................................................................................G7314

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 3Model G0575