Grindmaster B-6 User Manual

Digitally controlled decanter brewer, holds brew temperature to + 1°F throughout brew cycle.

Brew temperature, brew volume, operator defined pre-infusion/pulse brewing, energy

savings, and low temp/no brew are programmable from the front of the machine.

Model B-6

Model B-6

Dual Decanter Brewer

Grindmaster® Coffee Grinders and Brewers • Espressimo® Espresso Machines • Crathco® Hot Beverage Dispensers

Crathco® Cold and Frozen Beverage Dispensers • American Metal Ware® Coffee and Tea Systems

Tel [phone] • Fax [phone] • 1-800-695-4500

P.O. Box 35020 • Louisville, KY 40232 • USA

www.grindmaster.com • email: [e-mail]

Specification Model B-6

Electrical

120/240V, 4100W, 17.1A
120/208V, 3230W, 15.5A

European voltages available

Brew Capacity
(decanters / hour)

@ 240V: 16

@ 208V: 12
Water Line 1/4” flare
Water Line Pressure 20 to 100 psi
Tank Drain Yes

Tank Size 4.3 Gallons
Dimensions (H x W x D) 19” H x 16.2” W x 17.8” D (48 cm x 41 cm x 45 cm)
Ship Dimensions (H x W x D) 22” H x 24” W x 21” D (56 cm x 61 cm x 53 cm)
Weight 46 lbs. (21 kg)

Ship Weight 55 lbs. (25 kg)
Listings UL, CUL, NSF, CE

1004 Form # AM-296-03

© Grindmaster Corporation, 2003
PRINTED IN USA

Model B-6

16.2”

19.0”

17.8”

18.5”

0.75”

0.38”-

0.75”

2.8”

Front View

Side View

Specifications are subject to improvement or change without notice.

Features

Brewer has 6 decanter warmers - 3 gallons of
coffee holding capacity

Brew Temperature - Brewer will hold the brew
temperature to +/-1°F during complete brew cycle

Brew Volume - Visual programming prevents
multiple brew cycles to set volume

Pre-Infusion/Pulse Brewing - Allows brewer to
extract up to 20% more coffee per batch of grounds

Energy Savings/Coffee Old - Warmers to be
programmed to shut off and alert customer after a
pre-determined hold time

Low Temp/No Brew - Allows the brew cycle to begin
only when the water has reached optimum brewing
temperature

Cycle Counter - stores number of brew cycles

Settings Lock-out - Prevents settings from
being adjusted from the front of the machine