Grieve Corporation CBV Installation Manual

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705-0557
For Product Information Call 1-800-433-2232
Visit Our Web Site: www.metro.com

ASSEMBLY INSTRUCTIONS FOR HIGH TEMPERATURE KIT PART NO. HTK-1

WITH THIS KIT, THE (CBH BENCHSIDE) MODEL CAN WITHSTAND TEMPERATURES OF 350° F (177°C),
(CBH TRANS-STOR, CBL & CBV) MODELS CAN WITHSTAND TEMPERATURES OF 250° F (121° C). NOTE:
WHEN THE CART IS EXPOSED TO TEMPERATURES IN EXCESS OF 325° F (160° C), FOR LONG PERIODS OF
TIME, SOME DEGRADATION OF THE NUMBER STRIP LABELS WILL BE EXPERIENCED. IF DESIRED,
THESE LABELS CAN BE REMOVED.

CONTENTS: DESCRIPTION QTY.

CASTER 2
CASTER W/ BRAKE 2
METAL POST CAP 4
CAUTION HOT LABEL 2
ALUMINUM SPLIT SLEEVES W/ C-RINGS 3 BAGS

1.) UNPACK THE CARTON TO CONFIRM AMOUNT AND IDENTIFY THE COMPONENTS.

2.) PRY OUT THE GRAY PLASTIC CAP ON THE TOP OF EACH POST AND REPLACE IT WITH THE METAL

POST CAP.

3.) INSTALL THE CASTERS INTO THE POSTS FOLLOWING THE INSTRUCTIONS SUPPLIED WITH THE

TRUCK.

4.) DO NOT INSTALL THE DONUT BUMPERS ONTO THE POSTS.

5.) FOLLOW THE TRUCK ASSEMBLY PROCEDURES AS OUTLINED, REPLACING THE CONDUCTIVE SPLIT

SLEEVES W/ ALUMINUM SPLIT SLEEVES AND C-RINGS.

6.) AFFIX THE CAUTION HOT LABELS TO THE PANELS OR FRAMES.

INSTHTK

REV. A 3/01