Green-Strike 800CU, 804AE User Manual

Model # 800CU

# 804AE

OWNER’S MANUAL

Invented, Designed, & Tested in Canada

www.green-stike.com

SAFETY INFORMATION:

• This owner’s manual contains important information necessary for the proper
assembly and safe use of this product.

• Read and follow all warnings and instructions before assembling and using
the product.

• Keep this manual for future reference.

WARNINGS:

• AVOID all contact with eyes, ears, nose and mouth. After handling attractants,
throughly wash contacted skin. Keep out of reach of children and animals.
Avoid inhaling or ingesting.

• For outdoor use only! Do NOT use indoors!

• Store all attractants in a cool, dry place away from any source of intense heat
or moisture. Dispose of attractants in a trash receptacle.

• Do NOT empty water from Breeding-Zone in wet areas around your yard.

• Avoid looking directly into UV light for an extended period of time.

NOTICE TO USER:

This mosquito control device is intended to trap mosquito eggs and help to
reduce the overall mosquito population. Maxtech Mosquito Control Inc. does not
guarantee a complete elimination of mosquito populations in your area.

This is a pest control solution and is to be used only in accordance with the
directions on the label. The user assumes the risk to persons or property that
may arise from such use of this product.

Be diligent. Watch the news. Stay updated on potential mosquito diseases in
your area. Never use multiple attractants in the same unit.

Visit www.green-strike.com, follow us on Facebook, Twitter & Instagram for
frequent updates on mosquito born diseases that are potentially in your area.

WARRANTY:

warranties to the original purchaser that this product is free from
defective materials and workmanship. This warranty is limited to remedy any
defective part for a period of one year from the date of the original purchase.
Retain your original receipt as proof of purchase. This warranty does not apply
to electrical components, nor to, in our judgment, misuse or abuse. If this unit
has been altered, no warranty is in force. In no case shall be liable
for any accidental, punitive, consequential or any other damages of any kind
for breach of this or any other warranty, expressed or implied.

Register your warranty online through www.green-strike.com/register.

173 Roger Street
Waterloo, Ontario N2J 1B1
Toll Free: 1-800-265-8847 ©2018

ABOUT YOUR MOSQUITO PREVENTER

Remote

Now that you have purchased a Mosquito Preventer, you are on
your way to preventing mosquitoes in your outdoor living areas. Just a reminder
that the Mosquito Preventer works great at reducing “second generation”
mosquitoes that otherwise would be multiplying in your backyard.

Please carefully read through this manual to understand how to use and
maintain this device.

INCLUDED IN BOX:TABLE OF CONTENTS:

How To Setup Your Preventer pg 3
How The Preventer Works pg 7
Zero-Hatch Technology Features pg 8
Where To Place The Preventer pg 9
How Do I Know If It Is Working? pg 10
How To Maintain Your Preventer pg 11
Troubleshooting/Diagnostics pg 13

Lid

1x Bottom Reservoir
1x Breeding-Zone
1x Reactor
2x Landing Strips
1x Remote
8x AA Batteries
1x User Manual

Breeding-Zone

AA Batteries

Remote

Front Display

Landing Strips

Latch
(Front & Back)

Bottom
Reservoir

Reactor With

Attractant

Max/Min
Water Level Gauge

HOW TO SETUP YOUR MOSQUITO PREVENTER FOR THE FIRST TIME

Step 1: Open the box & remove
product from packaging.

Step 2: Separate the Breeding-Zone
from the Bottom Reservoir.

Step 3: Rotate the lid of the Breeding-Zone
to unlock and remove the lid. This
will give you access to the Reactor,
Batteries, Remote and Landing Strips.

Step 4: Peel along the dotted line on the
Landing Strip’s packaging. Remove
out the TWO Landing Strips from
their plastic packaging. Gently peel
off the Glue Protection plastic.
Ensure that the Glue Protection
side of the strips are facing down.
Align the slots of the Landing
Strips up with the Tabs on the
Mosquito Preventer. Gently
press down on the area of the
Landing Strips that has the glue.
Fold the landing area of the
strips downward along the edge
of the Tank.

Step 6: Replace the Breeding-Zone
lid and rotate it to lock
it back on securely.

Step 5: Open the battery compartment
and retrieve the battery tray. Insert
the 8 AA batteries into the tray.
Return the tray to the battery
compartment with the little black
square facing the Landing Strips.
Close the cover rmly by hand.

Step 7: Fill the Bottom Reservoir up
to the ll line with rain water
or distilled water (to prevent
calcium buildup) as indicated
on the viewing window.