SERVICE MANUAL
ES32ML
ES32FML
EBS12ML
Battery-powered
Micro Cutters
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
52080297 © 2016 Greenlee Textron Inc. 5/16
Register this product at www.greenlee.com
Battery-powered Micro Cutters
Table of Contents
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Other Publications ......................................................... 2
Important Safety Information .....................................3–4
Main Illustrations—All Tools .......................................5–6
Main Parts List—All Tools .............................................. 7
Head and Ram Illustration and Parts List
ES32ML and ES32FML ............................................. 8
EBS12ML ................................................................... 9
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize authorized
Greenlee service personnel with the service parts for the
following Greenlee tools:
• ES32ML Battery-powered Cable Cutter
• ES32FML Battery-powered Cable Cutter
• EBS12ML Battery-powered Single Use Lock Cutter
and Bolt Cutter
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge at www.greenlee.com.
Other Publications
Operation Manual: Publication 52078039
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
All specications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
KEEP THIS MANUAL
2
IMPORTANT SAFETY INFORMATION
SAFETY
ALERT
SYMBOL
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, dened below,
indicates the severity of the hazard. The message
after the signal word provides information for preventing or avoiding the hazard.
Battery-powered Micro Cutters
Skin injection hazard:
Do not use hands to check for oil
leaks. Oil under pressure easily
punctures skin. If injured, seek
medical attention immediately to
remove oil.
Failure to observe this warning
could result in serious injury, gangrene, or death.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool. Refer also to the
Operation Manual, which is listed
under “Other Publications.”
Failure to observe this warning
could result in severe injury or death.
Do not use solvents or ammable
liquids to clean the tool body.
Solvents or ammable liquids could
ignite and cause serious injury or
property damage.
Do not dispose of batteries in a re. They will vent
fumes and may explode.
Failure to observe this warning could result in severe
injury from harmful fumes or burns from ying
debris.
Cutting hazard:
• Remove battery before changing
dies, adapters, or jaws.
• Keep hands away from the cutting
head when cutting.
Failure to observe these warnings
could result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
ying debris or hydraulic oil.
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
3
Battery-powered Micro Cutters
IMPORTANT SAFETY INFORMATION
Inspect tool and blades before use. Replace any
worn or damaged parts. A damaged or improperly assembled tool can break and strike nearby
personnel.
Failure to observe this warning could result in severe
injury or death.
• Do not twist work piece or tool during cutting
operation. Blade failure could result.
• This tool is not designed for continuous use. After
LED indicator (red) indicates tool has become too
hot, allow the cutting tool to cool for 15 minutes.
• Do not secure this tool in a vise. This tool is
designed for hand-held operation.
• This tool may be used in damp or wet environments; however, air-drying is recommended before
use if the tool becomes soaked. Damage may
result when the tool is operated prior to thorough
drying when electrical components are soaked.
• Use this tool for the manufacturer’s intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
• Do not store the battery at more than 122 °F
(50°C) or less than –4 °F (–20 °C). Damage to the
battery can result.
• Do not use another manufacturer’s charger. Other
manufacturers’ chargers may overcharge and
damage the battery.
• Do not attempt to open the battery. It contains no
user-serviceable parts.
Failure to observe these precautions may result in
injury or property damage.
Do not perform any service or maintenance other
than as described in this manual. Injury or damage
to the tool may result.
Failure to observe this precaution may result in injury
and property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
Do not allow anything to contact the battery
terminals.
• Do not immerse the batteries in liquid. Liquid may
create a short circuit and damage the battery.
If batteries are immersed, contact your service
center for proper handling.
• Do not place the battery into a pocket, tool pouch,
or tool box with conductive objects. Conductive
objects may create a short circuit and damage the
battery.
• Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage
the battery.
Failure to observe these precautions may result in
injury or property damage.
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4
Main Illustrations—All Tools
Battery-powered Micro Cutters
4
71
75
77
70
72
78
29
49
68
80
3
19
6
5
2
73
68
7
76
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
5
Main Illustrations—All Tools (cont’d)
Battery-powered Micro Cutters
89
Motor Assembly
83
81
82
Pump Housing Unit, Relief Valve Unit,
and Piston Pump Assembly
84
87
88
50
86
85
39
38
37
36
35
34
35
33
32
31
5
25
20
53
54
56
50
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
52
55
6
57 51
23
24
21
22
Battery-powered Micro Cutters
Main Parts List—All Tools
Key Part No. Description Qty Key Part No. Description Qty
52055860 Relief lever kit (includes 2, 3)
2 Screw ........................................................ 1
3 Relief valve lever ....................................... 1
4 52079810 Control board ............................................ 1
5* Seal ........................................................... 2
6 50121839 Screw ........................................................ 1
7 52080240 Ring (ES32ML, ES32FML) ......................... 1
52079807 Ring (EBS12ML) ........................................ 1
19 50018990 Piston pump assembly
(includes 20–25) ........................................ 1
20 Piston pump .............................................. 1
21 Spring ........................................................ 1
22 50019309 Piston pump housing ................................ 1
23* Piston seal ................................................. 1
24 Screw ........................................................ 1
25 Spring ........................................................ 1
29 50018922 Relief valve unit (includes 31–39)
(ES32ML, ES32FML) ................................. 1
52054799 Relief valve unit (includes 31–39)
(EBS12ML) ................................................ 1
31 52072070 Valve seat .................................................. 1
32 Needle valve .............................................. 1
33 Plunger ...................................................... 1
34 Spring ........................................................ 1
35 Lock washer (ES32ML, ES32FML) ............ 2
Lock washer (EBS12ML) ........................... 6
36* O-ring ........................................................ 1
37* O-ring ........................................................ 1
38 Pressure relief ............................................ 1
39 Screw ........................................................ 1
49 52048120 Pump housing unit (includes 50–57)
(ES32ML, ES32FML) ................................. 1
52054796 Pump housing unit (includes 50–57)
(EBS12ML) ................................................ 1
50 52055861 Clamp, 10 pack ......................................... 1
50* Clamp ........................................................ 2
51 Screw ........................................................ 1
52 50109162 Threaded bushing ..................................... 1
53 Pump block ............................................... 1
54 50109308 Threaded bushing ..................................... 1
55 50109316 Screen ....................................................... 1
56 52049296 Reservoir ................................................... 1
57* O-ring ........................................................ 1
68 52079808 Housing unit (includes 70–78) ................... 1
70 Screw ........................................................ 5
71 50019767 Screw ........................................................ 2
72 Compression spring, DA5.5 x L14.0 ......... 1
73 Trigger link ................................................. 1
75 Housing half .............................................. 1
76 Housing half .............................................. 1
77 Relief valve button ..................................... 1
78 Trigger cover ............................................. 1
80 52079809 Motor assembly (includes 81–89) ............. 1
81 Retaining ring ............................................ 1
82 50019589 Pin ............................................................. 1
83 Motor cap .................................................. 1
84 Disc housing .............................................. 1
85 Disc ........................................................... 2
86 Screw ........................................................ 2
87 Gear lube, 1.5 g ......................................... 1
88 Motor adapter ........................................... 1
89 Electric motor ............................................ 1
52078034 Identication decal (ES32ML) ................... 1
52078035 Identication decal (ES32FML) ................. 1
52078037 Identication decal (EBS12ML) ................. 1
52078033 Micro Tool decal ........................................ 1
52025832 Cut hazard decal ....................................... 1
52078365 Carrying case
* 50047957 Seal kit (includes items marked with
an asterisk, bushings not included)
52068605 10.8V battery, 1.5 Ah li-ion (16.2 Wh)
52068603 10.8V charger, li-ion batteries, 110V
52068604 10.8V charger, li-ion batteries, 230V
52057878 Biodegradable hydraulic uid
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
7
Battery-powered Micro Cutters
Head and Ram Illustration and Parts List—ES32ML and ES32FML
18
16
1
4
7
11
4
14
15
Key Part No. Description Qty
50121197 Head unit assembly, ES32ML
(includes 1–15)
52056587 Head unit assembly, ES32FML
(includes 1–15)
52055868 Ram kit (includes 1–3, 5)
1 Piston ........................................................ 1
2 Coil spring ................................................. 1
3 Steel washer .............................................. 1
52055870 Hardware kit (includes 4, 8–11, 13, 15)
4 Retaining clip ............................................. 2
5 Steel washer .............................................. 1
6 50019295 Screw ........................................................ 1
7 50120913 Aluminum head ......................................... 1
8 Screw ........................................................ 1
10
2
3
5
6
17
8
9
12
13
Key Part No. Description Qty
9 Pivot .......................................................... 1
10 Retaining clip ............................................. 1
11 Pivot .......................................................... 1
52055869 Blade kit, ES32ML (includes 12–15)
52056589 Blade kit, ES32FML (includes 12–15)
12 Fixed blade ................................................ 1
13 Pivot bolt ................................................... 1
14 Movable blade ........................................... 1
15 Hex nut ...................................................... 1
16 50120050 Bushing with seal ...................................... 1
17 52025832 Pinch hazard decal .................................... 1
18* Seal bushing (included in 50047957) ........ 1
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
8
Battery-powered Micro Cutters
Head and Ram Illustration and Parts List—EBS12ML
11
8
9
10
3
1
5
7
4
Key Part No. Description Qty
52033626 Head assembly (includes 1–7)
52033628 Cutter blade kit (includes 1–4) ................... 1
1 Fixed blade ................................................ 1
2 Movable blade ........................................... 1
3 Roll pin ...................................................... 1
4 Socket head cap screw ............................. 1
5 50019295 Hex head cap screw, m3x4 ....................... 1
6 50019236 Compression spring .................................. 1
7 Cutter head ............................................... 1
2
12
6
Key Part No. Description Qty
8* O-ring (included in 50047957) ................... 1
9* Piston backup ring
(included in 50047957) .............................. 1
10 50019082 Bushing ..................................................... 1
11 52024564 Pinch hazard decal .................................... 1
12 Disc ........................................................... 1
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
9
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company • Greenlee Textron Inc. is a subsidiary of Textron Inc.
www.greenlee.com
USA Tel: 800-435-0786
Fax: 800-451-2632
Canada Tel: 800-435-0786
Fax: 800-524-2853
International Tel: +1-815-397-7070
Fax: +1-815-397-9247
Loading...