Greenheck RDC-6 Installation Manual
PN 466215
SP-A Box Slot
Plastic SP-A
Duct Adapter Tabs
Insert plastic duct tab into SP-A box slots.
Plastic SP-A
Duct Adapter (PN 473322)
SP-A Box
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
SP-A Box
Plastic SP-A
Duct Adapter (PN 473322)
Screw Tabs
Rotate plastic SP-A duct adapter (PN 473322)
until the screw tabs meets SP-A box.
2
Sheet Metal Screw #10x3/8
SP-A Box
Plastic SP-A
Duct Adapter (PN 473322)
Screw Tabs
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
SP-A Box
Plastic SP-A
Duct Adapter (PN 473322)
Screw Tabs
Screw holes
Rotate plastic SP-A duct adapter (PN 473322)
until the screw tabs meets SP-A box.
®
RDC-6 Duct Conversion
Assembly and Installation Instructions
Please read these instructions carefully before attempting to assemble the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
Sheet Metal
Screws
Removal of Original Rectangular Outlet
Remove the four (4) sheet metal screws that hold
the duct connector to the blower box assembly
on the discharge side.
Discharge Side
Installation of RDC-6 Round Duct Connector on SP-A 110-190
1
2
Rotate plastic SP-A duct adapter (PN 473322)
until the screw tabs meets SP-A box.
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
3
Install screws provided to secure discharge.
Phillips Head (PN 415838)
®
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
466215 • RDC-6 Duct Conversion, Rev. 4, March 2011 Copyright 2011 © Greenheck Fan Corp
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
Loading...