Greenheck EDD-601 Installation Manual

Stationary Louver

Dual Drainable Blade

Application and Design

EDD-601 is a weather louver designed to protect air intake and
exhaust openings in building exterior walls. Design incorporates
a drainable head member and stationary horizontal blades to
channel water to the jambs which guides the water through vertical
downspouts for escape at the sill. The EDD-601 is an extremely
efficient louver with AMCA LICENSED PERFORMANCE DATA
enabling designers to select and apply with confidence.

Standard Construction

Frame . . . . . . . .Heavy gauge extruded 6063-T5 aluminum,

6 in. x 0.081 in. nominal wall thickness

Blades . . . . . . . .Dual drainable design, heavy gauge extruded

6063-T5 aluminum, 0.081 in. nominal wall
thickness, positioned at 37º and 45º angles on
approximately
6 in. centers

Construction . . Mechanically fastened

Birdscreen . . . . .3/4 in. x 0.051 in. fl attened expanded aluminum

in removable frame, inside mount (rear)

Finish . . . . . . . . . Mill

Minimum Size . . 12 in. W x 16 in. H

Maximum Single

Section Size . . .120 in. W or 120 in. H (limited to 70 ft. sq.)

Options (at additional cost)

• A variety of bird and insect screens

• Blank off panel

• Clip angles

• Extended sill

• Filter rack

• Flanged frame

• Glazing adaptor

• Hinged frame

• Security bars

• Welded construction

• 0.125 in. nominal wall thickness

• A variety of architectural finishes including:
Clear anodize
Integral color anodize
Baked enamel paint
Kynar paint

EDD-601

*Width and height dimensions furnished

approximately ¼ inch under size.

Stationary Louver Dual Drainable Blade

Free Area Chart (Sq. ft.)

Louver
Height

in

12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120

Inches

16 0.44 0.72 1.01 1.29 1.57 1.86 2.14 2.35 2.64 2.92 3.21 3.49 3.77 4.06 4.34 4.55 4.84 5.12 5.41

18 0.50 0.83 1.15 1.47 1.80 2.12 2.45 2.69 3.02 3.34 3.67 3.99 4.32 4.64 4.97 5.21 5.53 5.86 6.18

24 0.70 1.16 1.61 2.07 2.52 2.98 3.43 3.77 4.23 4.68 5.14 5.59 6.05 6.50 6.96 7.30 7.75 8.21 8.66

30 0.94 1.55 2.16 2.77 3.38 3.99 4.60 5.06 5.67 6.28 6.89 7.50 8.11 8.73 9.34 9.79 10.40 11.01 11.63

36 1.19 1.95 2.72 3.49 4.26 5.03 5.80 6.38 7.15 7.92 8.68 9.45 10.22 10.99 11.76 12.34 13.11 13.88 14.64

42 1.43 2.36 3.29 4.22 5.15 6.07 7.00 7.70 8.63 9.56 10.49 11.41 12.34 13.27 14.20 14.90 15.83 16.75 17.68

48 1.68 2.77 3.86 4.94 6.03 7.12 8.21 9.03 10.12 11.20 12.29 13.38 14.47 15.56 16.65 17.46 18.55 19.64 20.73

54 1.93 3.17 4.42 5.67 6.92 8.17 9.42 10.36 11.60 12.85 14.10 15.35 16.60 17.85 19.10 20.03 21.28 22.53 23.78

60 2.17 3.58 4.99 6.40 7.81 9.22 10.62 11.68 13.09 14.50 15.91 17.32 18.73 20.13 21.54 22.60 24.01 25.42 26.83

66 2.42 3.98 5.55 7.12 8.68 10.25 11.82 12.99 14.56 16.13 17.70 19.26 20.83 22.40 23.97 25.14 26.71 28.27 29.84

72 2.66 4.39 6.11 7.84 9.57 11.29 13.02 14.31 16.04 17.77 19.49 21.22 22.94 24.67 26.40 27.69 29.42 31.14 32.87

78 2.91 4.79 6.68 8.56 10.45 12.33 14.22 15.63 17.52 19.40 21.29 23.18 25.06 26.95 28.83 30.25 32.13 34.02 35.90

84 3.15 5.20 7.24 9.29 11.33 13.38 15.42 16.96 19.00 21.05 23.09 25.14 27.18 29.23 31.27 32.81 34.85 36.90 38.94

90 3.40 5.60 7.81 10.01 12.22 14.42 16.63 18.28 20.49 22.69 24.90 27.10 29.31 31.51 33.72 35.37 37.57 39.78 41.98

96 3.65 6.01 8.38 10.74 13.10 15.47 17.83 19.61 21.97 24.34 26.70 29.07 31.43 33.80 36.16 37.94 40.30 42.66 45.03

102 3.89 6.42 8.94 11.47 13.99 16.52 19.04 20.93 23.46 25.98 28.51 31.03 33.56 36.08 38.61 40.50 43.03 45.55 48.08

108 4.14 6.82 9.51 12.19 14.88 17.56 20.25 22.26 24.95 27.63 30.32 33.00 35.69 38.37 41.06 43.07 45.76 48.44 51.13

114 4.39 7.23 10.08 12.92 15.77 18.61 21.46 23.59 26.44 29.28 32.13 34.97 37.82 40.66 43.51 45.64 48.49 51.33 54.18

120 4.63 7.64 10.64 13.65 16.65 19.66 22.67 24.92 27.92 30.93 33.94 36.94 39.95 42.95 45.96 48.21 51.22 54.22 57.23

Louver Width in Inches

EDD-601PERFORMANCE DATA

Extruded Aluminum

Greenheck
Fan
Corporation
certifies that
the EDD­601 louvers
shown

herein
are licensed to bear the
AMCA Seal. The ratings
shown are based on
tests and procedures
performed in accordance
with AMCA Publication
511 and comply with
the requirements of the
AMCA Certified Ratings
Program. The AMCA
Certified Ratings Seal
applies to air performance
and water penetration
ratings.

Airflow Resistance (Standard Air - .075 lb/ft

Pa

in. wg

1

0.9

200

100

90

80

70

60

50

40

30

20

Static Pressure Drop

10

9

8

7

6

5

ft/min

m/s

Test Size 48 in. x 48 in.

0.8

Standard Air - .075 lb/ft

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

200200 300 400 500 600 700 8009001000 2000 3000

3

Intake

Exhaust

2345678910

3

) Water Penetration (Standard Air - .075 lb/ft3)

Free Air Velocity

Model EDD-601 resistance to airflow (pressure drop) varies
depending on louver application (air intake or air exhaust).
Free area velocities (shown) are higher than average
velocity through the overall louver size. See louver selection
information.

Test size 48 in. x 48 in. Test duration of 15 min.

The AMCA Water Penetration Test provides a method for comparing
various louver models and designs as to their efficiency in resisting
the penetration of rainfall under specific laboratory test conditions. The
beginning point of water penetration is defined as that velocity where the
water penetration curve projects through .01 oz. of water (penetration)
per sq. ft. of louver free area.

penetration for Model EDD-601 is 1107 fpm free area velocity.

The beginning point of water

*

These perfor mance ratings do not guarantee a louver to be weather­proof or stormproof and should be used in combination with other factors
including good engineering judgement in selecting louvers.