Greenheck CRD-60X User Manual

CRD-60X

Ceiling Radiation Damper

Curtain Type With Insulation Skirt

Application and Design

The CRD-60X, which is manufactured with an attached insulation skirt, has been UL tested and labeled for protection of ceiling openings in fire rated floor/ceiling assemblies with fire resistance ratings of 3 hours or less.

Standard Construction

Frame/Blades: Galvanized steel

(in gauges required by UL listing R13446).

Fusible Link: Replaceable 165°F (74ºC) UL listed link is standard, 212°F (100ºC) is optional.

Finish: Mill galvanized.

Blade Insulation: Non-asbestos UL classified.

Size Limitations

Minimum Size: 6 in. x 4 in.

(152mm x 101mm) Maximum Size: 24 in. x 24 in. (610mm x 610mm)

Thermal Blanket Option

Ceramic fiber or mineral wool thermal blanket available.

CSFM California State Fire Marshal Fire Damper Listing (#3226-0981:111)

“UL CLASSIFIED (see complete marking on product)”

“UL CLASSIFIED to Canadian safety standards (see complete marking on product)”

Standard 555C (Listing #R13446)

National Fire Protection Association: NFPA Standards 90A and 101

BOCA, ICBO, SBCCI, & IBC Building Codes

New York City MEA Listing #260-91-M

Installation instructions available at www.greenheck.com.

*W & H dimensions furnished approximately 1/4 in. (6mm) under size.

CRD-60X Rev. 4 June 2008