Greenheck Centrifugal Ceiling and Cabinet Exhaust Fans CSP User Manual

Centrifugal Ceiling and Cabinet Exhaust Fans

Models SP and CSP

See ENERGY STAR® Models on Pages 16-17

September

2012

Models SP and CSP

Ceiling and Cabinet Exhaust Fans

Standard Construction Features ..........4-5

Options and Accessories ................. 6

SP Grill and Lighting Options.............. 7

Control Accessories ....................8-9

Filter and Discharge Accessories.......... 10

Flat Roof Caps ........................ 11

Wall Discharge Accessories............12-13

Sound Level Information ................ 14

Energy Star Approval ................... 15

Greenheck Fan Corporation certifies that the SP models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. The SP models are not AMCA certified with 50 hertz motors.

Model Number Code ................... 15

Model SP-A .......................... 16

Model SP-B and SP-C.................. 17

Model CSP-A ......................... 18

Model CSP-B ......................... 19

Model SP (50 cycle) .................... 20

Model CSP (50 cycle)................... 21

Typical Specifications.................22-23

Warranty ............................. 24

Greenheck Fan Corporation certifies that the CSP models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. The CSP models are not AMCA certified with 50 hertz motors.

Models SP and CSP are listed electric fans (UL/cUL 507). Ceiling Exhaust Fans are also UL Listed for above bathtub/shower with GFCI branch protected circuit. File no. E33599.

Products that earn the ENERGY STAR® prevent greenhouse gas emissions by meeting strict energy efﬁciency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy.

Fans that are ENERGY STAR qualiﬁed include: SP-A-50, 70, 90, 200, 250, 290 and 410 SP-B-50, 70, 80 and 90

Models SP and CSP

Ceiling and Cabinet Exhaust Fans

Model Comparison

Location Mounting Airﬂow Application

Model

Outdoor

Indoor

Roof Curb

Base/Floor

Hanging

Wall

Ceiling Mounted

Exhaust

Supply

Reversible

Recirculate

General/Clean Air

CSP

9999 99 99999 99

Great things come in small packages, as do our ceiling fan SP models and cabinet fan CSP models. Be assured when you buy any Greenheck product, you are getting a quality product at a competitive price. In fact, we guarantee our SP and CSP ceiling and cabinet exhaust fans with a three-year warranty. We offer the most comprehensive ceiling and cabinet exhaust fan line in the commercial market. We are your market leader!

Contaminated Air

Spark Resistant

Grease (UL 762)

Smoke Control (UL)

Drive

Type

High Wind (150 mph)

High Temp (above 200°F )

Belt

Direct

Impeller

Type

Centrifugal

Propeller/Axial

Performance

Mixed Flow

Maximum Volume

(cfm)

1,600 1 $

3,800 1 $

Benefits

• Lowest sound in the industry

• Compact size

• Five different fan styles offering you a

competitive price

• Broadest performance selections in the industry

Pressure

(in. wg)

Relative Cost

Maximum Static

SP fans are designed for ceiling mounted applications.

Model Description

SP-A

SP-B

Ceiling Fans

SP-C

CSP-A

CSP-B

Inline Fans

for

cations

Premium Ceiling Fan: Best choice to meet sound requirements.

Deluxe Ceiling Fan: Compact to fit most applications with quiet operation.

Economy Ceiling Fan: Designed for light commercial applications.

Premium Inline Fan: Outperforms the competition and is preferred by specifying engineers.

Deluxe Inline Fan: Compact design to fit in small remote spaces.

Profile

min. height

9 inches

(229 mm)

7 inches

(178 mm)

⁄8 inches

(86 mm)

9 inches

(229 mm)

7 inches

(178 mm)

CSP fans are designed for inline mounted applications.

Sound

min. sones

0.5

1.2

3.0

0.8

1.5

Air Volume

(maximum)

1,600 cfm

(2718 m3/hr)

200 cfm

(340 m3/hr)

50 cfm

(85 m3/hr)

3,775 cfm

(6414 m3/hr)

185 cfm

(314 m3/hr)

UL Listing

UL/cUL Listed for above bathtub/shower with GFCI branch protected circuit (Sizes A390 and smaller)

UL/cUL Listed for above bathtub/shower with GFCI branch protected circuit

UL Listed

UL/cUL Listed

Standard Construction Features

Model SP-A

Model SP-B

Model CSP-A

Model CSP-B

Model SP-C

Standard Construction Features

Backdraft

Damper

2 Outlet

Power

Assembly

Electrical

Access

Electrical

Knockouts

Acoustic

Insulation

7 Disconnect

Electrical

Junction Box

9 Grille

Mounting

Brackets

11 Housing

12 Motors

13 Access Panel

Exclusive Electrical Wiring Feature

Number and Description

Durable plastic to eliminate rattling & backdrafts

Aluminium to eliminate rattling & backdrafts

Round - For quick and easy connections 50-90 50-200 50 50-200

Square - For quick and easy connections 110-1550 110-3600

Removes quickly for maintenance

Includes conversion from horizontal to vertical discharge

Vertical electrical access to eliminate drilling holes

External electrical access to eliminate removing motor pack, saving installation time

Eliminates drilling holes (horizontal or vertical)

Absorbs sound

Servicing is quick and safe

Large for easy wiring

Concealed attachment screws securely fasten grille to housing for quiet, rattle free operation

Adjustable for multiple installation conditions

Embossed galvanized steel for rigidity

A low profile for height restricted areas

Motors are compatible for use with speed controls and have thermal overload protection

Domestic & International

• 50 cycle, 220v or 240v

• 60 cycle, 115v, 208v, 220v, 230v, & 277v options

(See CAPS for availability)

Gain easy access to internal components once installed

Electrical access cover located on the housing exterior. This feature permits external wiring without removing the power assembly, saving installation time and cost. Available on models SP-A and CSP-A.

Specific Features for Each Model

SP-A SP-B SP-C CSP-A CSP-B

99 9

99999

99 99

99999

99 99

999

99999

99 9

60 cycle,

115v only

99999

Double-Wide Fans

Vertical Discharge

Available for applications requiring 700 cfm or greater. Double-wide fans have two double-width forward-curved wheels, which are housed in separate scrolls, and driven by a single motor. Available on models SP-A and CSP-A.

Exhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. Available on models SP-A and CSP-A.

Options and Accessories

Ceiling Radiation Damper

The National Fire Protection Association (NFPA) Standard 90A requires openings in fire rated ceiling assemblies to be protected by appropriately rated ceiling radiation dampers. As a result, many local codes require fans installed in fire rated ceilings to be protected by dampers which are insulated against both heat and flame.

UL Classified ceiling radiation dampers are rated at three to four hours of fire resistance. All model SP fans and fan/light combinations are available with ceiling radiation dampers. This design saves space by allowing the damper to mount directly beneath the fan.

Model SP-A

SP-A Fan

Hanging Vibration Isolation

Ceiling Radiation Damper

Fire Rated Ceiling

Model SP-B

3 in.

AxB

Grille

SP-B Fan

Hanging Vibration Isolation

Ceiling Radiation Damper

Grille

Contractor 4 Packs

Save installation time and labor by installing the housing first, then installing the internal components after the sheetrocking, plastering and finishing is done. Housings are packaged in one box, power assemblies and grilles are packaged in another box. Components are shipped to coincide with the phase of your project. (Model SP-B only).

Wheel Options

Greenheck’s ceiling and cabinet fans (models SP and CSP) deliver high performance from a forward-curved wheel. The forward-curved wheel design offers both high-efficiency and low sound. Fan wheels are constructed of polypropylene or steel as standard, and all models offer an aluminum wheel option.

• Level A models utilize steel or polypropylene wheel

construction depending on size.

• Level B models are standard with a

polypropylene wheel.

Polypropylene

Steel

SP Model CRD Length (A) Width (B) Height

⁄2

A50 - A190 310

B50 - B200 A200 - A390

A410 - A510 A710 - A780

A700 700

A900 - A1550

All dimensions shown in inches (millimeters). Add an “L” to all CRD models if fan & light combo is used. *CRD is approximately 1/4 inch (6 mm) larger than housing dimension. (See Installation, Operation and Maintenance Manual)

320

350

360 24

(343)

(365)

(468)

(614)

⁄8

⁄16

111⁄8

(283)

121⁄4

(311)

1415⁄16

(379)

121⁄4

(311)

1415⁄16

(379)

(76)

Aluminum

SP Grille and Lighting Options

Grille Options

Designer - standard grille

Available in white polystyrene ﬁnish, with or without motion detector

Grille - Aluminum

White enamel ﬁnish standard for models A410-A1550.

Optional for models A50-A390 and B50-B200.

Grille - Stainless Steel

Polished stainless steel ﬁnish optional for models A50-A390 and B50-B200.

Grille - Decorative

White plastic ﬁnish, with or without light, motion detector or time delay

(see page 9 for motion detector and time delay information).

Optional for models A50-A390 and B50-B200.

or time delay (see page 9 for

motion detector and time delay information). Standard

on SP models A50-A390 and B50-B200.

Lighted Grille Options

Greenheck’s fan and light combinations include either a prismatic or a frosted lens and either compact fluorescent or incandescent lamps. Our unique light box is manufactured with a reflective material to increase the light given off by either type of lamp.

UL Listed for above bathtub and showers with GFCI branch protected circuit.

Model SP-A, sizes 50 - 390 Model SP-B, sizes 50 - 200

Prismatic Lens

The prismatic lens design provides approximately 25% more light than a traditional frosted lens. The lens may be easily removed to replace light bulbs.

Frosted Lens

The frosted lens option is a traditional design which lets approximately 80% of light through the lens. The lens may be easily removed to replace light bulbs.

Incandescent Lamps

One bulb provides up to 100 watts of light (bulbs provided by others).

• Dimmable

• Reflective light box

Customized grille options

Molded polystyrene available in an array of colors. Includes all the same accessory options as the standard grilles. For more information on the many ways this grille option can be used please contact your Greenheck representative.

Customized Grille Lens

Lenses can be customized with formed shapes or logos. Contact your Greenheck representative for details.

Compact Fluorescent Lamps (CFL)

Features and Beneﬁts

• GU24 Base

• Long Life, 10,000 hour average

rated life

• Lower maintenance and labor

costs for lamp replacements

• No lead glass - Better lumen

maintenance over life of bulb

• End-of-Life logic guards against violent failures

• Complies with UL 1993 End-of-Life requirements

• World Class phosphor insures high lumen output

and excellent lumen maintenance

• Replacement bulbs can be found wherever

standard light bulbs and fixtures are sold. Energy efficient ENERGY STAR

• California Energy Title 24 compliant

qualified fixtures.

Control Accessories

Speed Controls

Speed controls may be used on model SP and CSP fans for manual adjustment of the fan’s performance (for final system balancing) or to control the fan’s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 60% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Solid state speed controls are available for a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if the combined total amperage of the fans do not exceed the control rating.

FULL VOLTAGE

BLACK

SPEED CONTROL

RED

WHITE

Internal Mounting

SWITCHED FULL VOLTAGE

Dotted line indicates

for use with 10W

switch only.

VARIABLE VOLTAGE

AUX

DEVICE

Switches

Switches may be used on model SP and CSP fans to enable manual control of your fan or fan and light combination. There are several options to fit your application.

NEMA 1 - Single pole rocker

switch assembly.

• Rated for, 115v, 15 Amp, 1/2 hp

• UL Listed

Model MS-16 - Single pole rocker switch assembly

with cover and pilot light.

• Rated for, 115v, 15 Amp, 1/2 hp

• UL Listed

NEMA 1 - Two pole rocker switch assembly.

• Rated for, 220/230/240/277v, 20 Amp, 2 hp

• UL Listed

• Requires a 2x4 handy box.

EXTERNAL JUMPER

120 VAC

FAN

LOAD

For use with shaded pole and permanent split capacitor (PSC) motors. Available shipped loose or mounted internal or external.

SPEED CONTROL INTERNAL AND/OR EXTERNAL MOUNTING OPTIONS

Model

Voltage Rating

Amp Rating

5WSSC

115 - 127v

5 Amp

10WSSC

115 - 127v

10 Amp

15WSSC

115 - 127v

15 Amp

5W240

220 - 240v

5 Amp

8WSSC

220 - 240v

8 Amp

5W277

227v

5 Amp

NOTES: Speed controllers are not available for 208v applications. SP-C50 Speed Controller is shipped loose only. All speed controller options listed in table are UL Listed. Handy Box sizes are 2x4 for all options above except 10WSSC and 15WSSC, which are 4x4.

50 70 80 90 110 125 150 190 200 250 290 390 410 510 700 710 780 900 1050 1410 1550 1750 2150 3600

I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E No No No No No No

EEEEEEEEEEEEEEEEEE EEEEE

No No No *I/E I/E No I/E I/E *I/E No I/E I/E No I/E No No I/E No I/E No I/E No No No

No No No *E E No E E *E No E E No E No No E No E No E No No No

No No No No I/E I/E I/E I/E *I/E No No No No No No No No No No No No No No No

E = External mounted only I/E = Available Internal and External Mounted

KEY:

* Only available on the B-series (A-series is not available) No = Not available

Fan Sizes

LOAD

+ 16 hidden pages