Introduction and Features
1
Artful
Model
Remarks
Model
Remarks
V
Artful
Model
Remarks
3
Specifications and Technical Parameters
2
Model
Function
Rated Voltage
Rated Frequency
Total Capacit y ( W/B tu/h)
Power Input ( W)
Rated Input ( W)
Rated Cur r ent (A)
Air Flow Volum e (m
Dehumidifying Volume (l/h)
EER / C.O.P (W/W)
Energy Class
Model of Indoor Unit
Fan Motor Speed ( r / min)
(H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacit or ( uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Lengt h ( mm)
Evaporator
Pipe Diameter ( mm)
Indoor
Row-F in Gap(mm)
Coil length (l) x height (H) x
unit
coil width (L)
Swing Mot or Model
Output of Swing Mot or ( W)
Fuse (A)
Sound Pr essure Lev el dB ( A)
(H/M/L)
Sound Power Level dB ( A)
(H/M/L)
Dimension (W /H/D) ( mm)
Dimension of P ac k age
(L/W/H) ( mm)
Net Weight /Gr oss Weight ( k g)
/h) (H/M/L)
GWHN09AANK3A1A
COOLING HEA TING
220-240V~
50Hz
2600W / 9000(Btu/h) 2800W / 9500(Btu/h)
809 775
1120 1020
54.5
480
0.8
3.21 / 3.61
A
GWHN09AANK3A1A/
1250/1150/1000/900
10
/
1
0.1
Cross flow fan – 1
Ø85×615
Aluminum fin-c opper tube
Ø7
2-1.6
603×264×25.4
MP28VB
2
PCB 3.15A Tr ansfor mer 0. 2A
37/35/31/27
49/47/43/39
815×267×165
890×344×260
10/13
I
Dimension of Package
Artful
Outdoor
unit
Model of Outdoor Unit
Compressor
Manufacturer/tradem ark
Compressor Model
Compressor Type
L.R.A. (A)
Compres sor RLA(A)
Compressor Power Input(W)
Overload Protector
Throttling Method
Starting Method
Working Temp Range (℃)
Condenser
Pipe Diameter (mm)
Rows-Fin Gap(mm)
Coil length (l) x height (H) x
coil width (L)
Fan Motor Speed (rpm)
Output of Fan Motor (W)
Fan Motor RLA (A )
Fan Motor Capacitor (uF)
Air Flow Volume of Outdoor
Unit
Fan Type-Piece
Fan Diameter (mm)
Defros ting Method
Climate Type
Isolation
Moisture Protection
Permissible Excessive
Operating Pressure for the
Discharge Side(MPa)
Permissible Excessive
Operating Pressure for the
Suction Side(MPa)
Sound Pressure Level dB (A)
(H/M/L)
Sound Power Le vel dB (A)
(H/M/L)
Dimension (W/H/D) ( mm )
GWHN09AA NK3A1A/O
Hitachi
ASG102CV-B7AT
Rotary
18
4.05
875
KA-172-LYGN914
Capillary
Capacitor
16-30ºC/-7-48ºC
Aluminum fin-copper tube
Ø7
1-1.4
741×495.3×12.7
850
30
0.23
2
1500
Axial fan –1
Ø400
Auto defrost
T1
I
P24
I
3.8
1.2
50
60
848×540×320
Connec
tion
Pipe
Parameter data are subject to change withour prior notice. Refer to the nameplate of the unit.
(L/W/H)( mm)
Net Weight /Gros s Weight (kg)
Refrigerant Charge (kg)
Length (m)
Gas additional charge(g/m)
Outer
Diameter
Max Dis tance
Liquid Pipe Ø6(1/4”)
Gas Pipe Ø9.52(3/8”)
Height (m) 10
Length (m) 20
878×590×360
26/ 30
R410A/0.73
4
30
Model
3
Function
Rated Voltage
Rated Frequency
Total Capacit y ( W/B tu/h)
Power Input ( W)
Rated Input ( W)
Rated Cur r ent (A)
Air Flow Volum e (m
/h) (H/M/L)
Dehumidifying Volume (l/h)
EER / C.O.P (W/W)
Energy Class
Model of Indoor Unit
Fan Motor Speed ( r / min)
(H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacit or ( uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Lengt h ( mm)
Evaporator
Pipe Diameter ( mm)
Indoor
Row-F in Gap(mm)
Coil length (l) x height (H) x
unit
coil width (L)
Swing Mot or Model
Output of Swing Mot or ( W)
Fuse (A)
Sound Pr essure Lev el dB ( A)
(H/M/L)
Sound Power Level dB ( A)
(H/M/L)
Dimension (W /H/D) ( mm)
Dimension of P ac k age
(L/W/H) ( mm)
Net Weight /Gr oss Weight ( k g)
GWHN12ABNK3A1A
COOLING HEA TING
220-240V~
50Hz
3500W / 12000(Btu/h) 3800W / 12800(Btu/h)
1090 1052
1450 1500
76.5
520
1.2
3.21 / 3.61
A
GWHN12ABNK3A1A/
I
1350/1150/1050/900
10
/
1
0.1
Cross flow fan – 1
Ø85×615
Aluminum fin-c opper tube
Ø7
2-1.5
657×285×25.4
MP28VB
2
PCB 3.15A Tr ansfor mer 0. 2A
39/35/30/27
52/47/42/39
872×283×178
935×260×375
11/15
Dimension of Package
Artful
Outdoor
unit
Model of Outdoor Unit
Compressor
Manufacturer/tradem ark
Compressor Model
Compressor Type
L.R.A. (A)
Compres sor RLA(A)
Compressor Power Input(W)
Overload Protector
Throttling Method
Starting Method
Working Temp Range (℃)
Condenser
Pipe Diameter (mm)
Rows-Fin Gap(mm)
Coil length (l) x height (H) x
coil width (L)
Fan Motor Speed (rpm)
Output of Fan Motor (W)
Fan Motor RLA (A )
Fan Motor Capacitor (uF)
Air Flow Volume of Outdoor
Unit
Fan Type-Piece
Fan Diameter (mm)
Defros ting Method
Climate Type
Isolation
Moisture Protection
Permissible Excessive
Operating Pressure for the
Discharge Side(MPa)
Permissible Excessive
Operating Pressure for the
Suction Side(MPa)
Sound Pressure Level dB (A)
(H/M/L)
Sound Power Le vel dB (A)
(H/M/L)
Dimension (W/H/D) ( mm )
GWHN12ABNK3A1A/O
LANDA
QXA-133uB030
Rotary
32
5.1
1160
B250-150-141E
Capillary
Capacitor
16-30ºC/-7-48ºC
Aluminum fin-copper tube
Ø7
2-1.6
764×495×25.4
850
30
0.23
2
1500
Axial fan –1
Ø400
Auto defrost
T1
I
P24
I
3.8
1.2
52
62
848×540×320
Connec
tion
Pipe
Parameter data are subject to change withour prior notice. Refer to the nameplate of the unit.
(L/W/H)( mm)
Net Weight /Gros s Weight (kg)
Refrigerant Charge (kg)
Length (m)
Gas additional charge(g/m)
Outer
Diameter
Max Dis tance
Liquid Pipe Ø6(1/4”)
Gas Pipe Ø12(1/2”)
Height (m) 10
Length (m) 20
878×590×360
40/ 44
R410A/1.1
4
30
Model
3
Function
Rated Voltage
Rated Frequency
Total Capacit y ( W/B tu/h)
Power Input ( W)
Rated Input ( W)
Rated Cur r ent (A)
Air Flow Volum e (m
/h) (H/M/L)
Dehumidifying Volume (l/h)
EER / C.O.P (W/W)
Energy Class
Model of Indoor Unit
Fan Motor Speed ( r /min)
(H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacitor (uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Length (mm)
Evaporator
Pipe Diameter ( mm)
Indoor
Row-F i n Gap(mm)
Coil length (l) x height (H) x
unit
coil width (L)
Swing Mot or Model
Output of Swing Mot or ( W)
Fuse (A)
Sound Pr essure Lev el dB ( A)
(H/M/L)
Sound Power Level dB (A )
(H/M/L)
Dimension (W /H/D) ( mm)
Dimension of P ac k age
(L/W/H) ( mm)
Net Weight /Gr oss Weight (kg)
GWHN18ACNK3A1A
COOLING HEA TI NG
220V～240V
50Hz
18000Btu/h 19500Btu/h
1640W 1675
2100
11.3 11.3
780
1.8
3.2/3.4
A/B
GWHN18ACNK3A1A
/I
Cool：1380/1150/1050/950 Heat：1400/1200/1100/1000
20
/
1
0.19
Cross flow fan – 1
Ø98 X 733
Aluminum fin-c opper tube
Ø7
2-1.5
740X25.4X301
MP28VB
2
PCB 3.15A Tr ansfor mer 0. 4/0.1A
45/38/36/33
55/48/46/43
960 X300X195
1035 X390X280
13/18
2100
Dimension of Package
Artful
Outdoor
unit
Model of Outdoor Unit
Compressor
Manufacturer/tradem ark
Compressor Model
Compressor Type
L.R.A. (A)
Compres sor RLA(A)
Compressor Power Input(W)
Overload Protector
Throttling Method
Starting Method
Working Temp Range (℃)
Condenser
Pipe Diameter (mm)
Rows-Fin Gap(mm)
Coil length (l) x height (H) x
coil width (L)
Fan Motor Speed (rpm)
Output of Fan Motor (W)
Fan Motor RLA (A )
Fan Motor Capacitor (uF)
Air Flow Volume of Outdoor
Unit
Fan Type-Piece
Fan Diameter (mm)
Defros ting Method
Climate Type
Isolation
Moisture Protection
Permissible Excessive
Operating Pressure for the
Discharge Side(MPa)
Permissible Excessive
Operating Pressure for the
Suction Side(MPa)
Sound Pressure Level dB (A)
(H/M/L)
Sound Power Le vel dB (A)
(H/M/L)
Dimension (W/H/D) ( mm )
GWHN18ACNK3A1A
Shanghai Hitachi
ASH210SV-C8LU
ROTARY
40
8
1725
PUT-IN
Capillary
Capacitor
-7≤T≤46
Aluminum fin-copper tube
Ø7
2-1.4
810X660X26
860
48
0.41
3.5
-
Axial fan –2
Ø473
Auto defrost
T1
I
IP24
2.5
0.6
54
64
926X685X378
/O
Connec
tion
Pipe
Parameter data are subject to change withour prior notice. Refer to the nameplate of the unit.
(L/W/H)( mm)
Net Weight /Gros s Weight (kg)
Refrigerant Charge (kg)
Length (m)
Gas additional charge(g/m)
Outer
Diameter
Max Dis tance
Liquid Pipe Ø6(1/4”)
Gas Pipe Ø12(512”)
Height (m) 15
Length (m) 20
994X720X428
56/60
1.62
5
30g
3
Model
Function
Rated Voltage
Rated Frequency
Total Capacit y ( W/B tu/h)
Power Input ( W)
Rated Input ( W)
Rated Cur r ent (A)
Air Flow Volum e (m
/h) (H/M/L)
Dehumidifying Volume (l/h)
EER / C.O.P (W/W)
Energy Class
Model of Indoor Unit
Fan Motor Speed ( r /min)
(H/M/L)
Output of Fan Mot or (w)
Input of Heater (w)
Fan Motor Capacitor (uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Length (mm)
Evaporator
Pipe Diameter ( mm)
Indoor
Row-F in Gap(mm)
Coil length (l) x height (H) x
unit
coil width (L)
Swing Mot or Model
Output of Swing Mot or ( W)
Fuse (A)
Sound Pr essure Lev el dB (A)
(H/M/L)
Sound Power Level dB ( A)
(H/M/L)
Dimension (W /H/D) ( mm)
Dimension of P ac k age
(L/W/H) ( mm)
Net Weight /Gr oss Weight ( kg)
GWHN24ACNK3A1A
COOLING HEATING
230V~
50HZ
6150 6400
2098 1939
2525 2459
10.15 9.88
1030
--
2.93/3.3
A
GWHN24ACNK3A1A/I
1250/1100/950/750
70
/
2.5
0.36
Cross flow fan – 2
98 X 424
φ
Aluminum fin-c opper tube
7
2、1.4
847X286 X25.4
MP35XX
4
PCB 3.15A Tr ansfor mer 0. 2A
59/57/52/47
49/4742/37
1090X330X208
/
/
Dimension of Package
Artful
Outdoor
unit
Model of Outdoor Unit
Compressor
Manufacturer/tradem ark
Compressor Model
Compressor Type
L.R.A. (A)
Compres sor RLA(A)
Compressor Power Input(W)
Overload Protector
Throttling Method
Starting Method
Working Temp Range (℃)
Condenser
Pipe Diameter (mm)
Rows-Fin Gap(mm)
Coil length (l) x height (H) x
coil width (L)
Fan Motor Speed (rpm)
Output of Fan Motor (W)
Fan Motor RLA (A )
Fan Motor Capacitor (uF)
Air Flow Volume of Outdoor
Unit
Fan Type-Piece
Fan Diameter (mm)
Defros ting Method
Climate Type
Isolation
Moisture Protection
Permissible Excessive
Operating Pressure for the
Discharge Side(MPa)
Permissible Excessive
Operating Pressure for the
Suction Side(MPa)
Sound Pressure Level dB (A)
(H/M/L)
Sound Power Le vel dB (A)
(H/M/L)
Dimension (W/H/D) ( mm )
GWHN24ACNK3A1A/O
PANASONIC WANBAO COMPRESSOR (GUANGZHOU) CO,.LTD
5VS245EAA21
转子式
45.5
9
2125
Internal
Capillary
Capacitor
-15~54
铝箔铜管
9.52
2、1.5
760X630X25.4
780
68
0.75
2.5
/
Axial fan –1
460
Auto defrost
T1
I
IP24
4
0.96
66
56
950/700/412
Connec
tion
Pipe
Parameter data are subject to change withour prior notice. Refer to the nameplate of the unit.
(L/W/H)( mm)
Net Weight /Gros s Weight (kg)
Refrigerant Charge (kg)
Length (m)
Gas additional charge(g/m)
Outer
Diameter
Max Dis tance
Liquid Pipe 9.52
Gas Pipe 16
Height (m) 15
Length (m) 30
1100/750/450
/
1900
/
50
Parts name
3
Indoor Unit
Front panel
Filter
Heat
Power/Run
Guide louver
Setting Temp.
Air in
Air out
Remote controller
Displayer
Cool
Dry
Displayer
Power plug
Wrapping tape
Wall pipe
Reciver window
Air in
Outdoor Unit
Big handle
Drainage pipe
Air out
Note: This photo is about the models of 9K, 12K, the appearance of model of 18K and 24K are a little different from this picture.
Outline and Installing Dimension
4
Outline and Installing Dimension of Indoor Unit
Artful
Left Tube-exit Sign
Right Tube-exit Sign
Unit:mm
Dimension
Applicable models
Ceiling
Wall-mounted plate
Applicable to
Handle
Outline and Installing Dimension of Outdoor Unit (1)
Over 600
Over 600
Over 600
Over 600
Bolt
Nut
Wrench
Unit:mm
Applicable to
Artful
Outline and Installing Dimension of Outdoor Unit (2)
Over 600
Over 1000
Unit:mm
Over 600
Over 600
Bolt
Nut
Wrench
Applicable to
Outline and Installing Dimension of Outdoor Unit (3)
Over 100
Over 100
Over 600
Over 600
Bolt
Nut
Wrench
Unit:mm
Electrical Diagram
5
Artful
Artful
Manual of functions of remote controller and operation method
66
6
66
Manual of functions of remote controller
This function manual is for:
Temperature parameter
The room setting temperature(Tpreset)
The room ambient temperature (Tamb)
Basic Functions
Once energized, the compressor should in no way be restarted unless after 3-minute time interval at least. For the first
energization, the compressor will be started without 3-minute lag. The compressor, once started,will not be stopped
within 6 minutes with the change of room temperature.
If it is detected that the system is under antifreeze protection, the compressor and outdoor fan will be stopped,
Antifreeze protection is released when temp. is too high
Setting dry, compressor will run or stop according to actual ambient information,indoor fan will run with low fan speed.
If set up heating, when ambient temp., is lower than setting temperature, compressor, outdoor fan will run,
indoor fan will run at setting fan speed;
If ambient temperature is higher than setting temperature, compressor, outdoor fan will stop to run, indoor fan will run.
Anti-cool wind: When heating started up, in order to avoid cool air blow out, the compressor will be delayed 0-3mins to start up;
firstly it will run at low speed then will run at presetting fan speed or directly turn to run at setting fan speed.
Anti-high temperature: in heat mode, when detected the temperature is higher, outdoor unit will stop to run; If temp.
descend, outdoor fan will resume to run.
Blowing surplus heat: In heat mode, due to temperature reached, compressor, outdoor fan will stop running, indoor fan will accord to
actual circumstance will run at low fan speed for a while then stop running.
Cooling Mode
Cooling Conditions and Process
If ambient temperature is higher than presetting temperature, compressor, outdoor fan will run, indoor fan will run at setting fan speed.
If ambient temperature is lower than presetting temperature, compressor, outdoor fan will stop to run, indoor fan will run at setting
fan speed.
Under this mode the setting temperature range is16 ~30 .
Protection
Antifreeze Protection
DRY Modes
The conditions and process of DRY
Under this mode the setting temperature range is16 ~30 .
Heating Mode(No this function for Cooling only unit)
Heating Condition and Process
Under this mode, the temperature can be set within a range from 16 to 30 .
Protection funtion
Defrosting
This unit adopt intelligent defrosting, it can defrost according to the frosting conditions and display H1.
Fan mode
The indoor fan will run at preset speed.
Auto mode
Under this mode, the system will automatically select its run mode (cool, dehumidify, or fan) with the change of ambient
temperature, the protection function is the same with that of cool, heat mode.
Other control
Sleep
If set sleep for several minutes,unit will adjust the setting temp. according to intelligent judgement when unit is cool or heat mode.
Loading...