Great Plains UT5052 User Manual

Table of Contents Part Number Index

Parts Manual

Series I UT3030, UT5036,

UT5042, UT5048 & UT5052

Ultra-Till (Disc & Coulter)

Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!

41486

Cover illustration may show optional equipment not supplied with standard unit.

© Copyright 2013 Printed 12/31/13 576-026P

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................4

Using This Manual...............................................................4

Manual Replacement Information.......................................4

Manual Revisions................................................................4

Touch-up Paint....................................................................4

Hardware Legend................................................................5

Replacement Hardware......................................................5

Serial Numbers...................................................................5

Part Number Service Coding..............................................5

Section 2: Frames..........................................................6

Center Frame Assembly......................................................6

Hitch Pole & Truss Assembly...............................................8

Self Level Assembly..........................................................10

3-Section Wing Assembly, 3030........................................12

Inside Wing F rame Assemb ly, 5036, 5042, 5048 & 5052...14

Inside Wing Fold Assembly, 5036, 5042, 5048 & 5052.....16

5-Section Outside Wing Assembly, 5036, 5042, 5048 &

5052............................................................................18

Lights (S/N GP-A1202A-)..................................................22

Lights (S/N GP-A1203A+).................................................24

Section 3: Transport....................................................26

Center Walking Beam, 3030 & 5036.................................26

Center Walking Beam, 5042, 5048 (All S/N) 5052 (S/N

A1118A-).....................................................................28

Center Walking Beam, 5052 (S/N A1119A+ thru S/N

A1197A-).....................................................................30

Center Walking Beam, 5052 (S/N A1198A+)....................32

Wing Walking Beam Assembly..........................................34

Outside Wing Transport, 5036...........................................36

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 1)..........38

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 2)..........40

Front Gauge Wheel Assembly...........................................42

Hydraulic Gauge Wheel Assembly (S/N A1118A-)...........44

Hydraulic Gauge Wheel Assembly (S/N A1119A+)...........46

Section 4: Hydraulics..................................................48

Hydraulic Valve Bracket Assembly 3-Section....................48

Hydraulic Valve Bracket Assembly 5-Section....................50

Hydraulic Lift System, 3030 (S/N A1095A-)......................52

Hydraulic Lift System, 3030 (S/N A1096A+).....................54

Hydraulic Lift System, 5036 (S/N A1095A-)......................56

Hydraulic Lift System, 5036 (S/N A1096A+).....................58

Hydraulic Lift System, 5042, 5048, 5052 (S/N A1095A-)...60
Hydraulic Lift System, 5042, 5048, 5052 (S/N A1096A+)..62

Hydraulic Details Assembly...............................................64

Hydraulic Fold System, 3030 (S/N A1124A-)....................66

Hydraulic Fold System, 3030 (S/N A1125A+)...................68

Hydraulic Fold System, 5036............................................70

Hydraulic Fold System, 5042, 5048 & 5052......................72

Hydraulic Gang Layout......................................................76

Hydraulic Cylinder (810-138C 4X8X1.38 Rod).................78

Hydraulic Cylinder (810-477C 3X8X1.25 Rod).................80

Hydraulic Cylinder (810-478C 3.25X8X1.25 Rod)............82

Hydraulic Cylinder (810-479C 3.25X8X1.25 Rod)............84

Hydraulic Cylinder (810-480C 3.75X8X1.38 Rod)............86

Hydraulic Cylinder (810-481C 4.25X8X1.50 Rod)............88

Hydraulic Cylinder (810-484C 3X24X1.25 Rod)...............90

Hydraulic Cylinder (810-486C 4X16X1.25 Rod)...............92

Hydraulic Cylinder (810-487C 4X24X1.5 Rod).................94

Hydraulic Cylinder (810-557C 4.50X8X1.50 Rod)............96

Section 5: Gangs.........................................................98

Disc Gang Assembly (S/N GP-A1202A-)..........................98

Disc Gang Assembly (S/N GP-A1203A+).......................100

Coulter Gang Assembly (S/N GP-A1202A-)...................102

Coulter Gang Assembly (S/N GP-A1203A+)...................104

Gang To Gang Hanger Assembly....................................106

Gang Depth Indicator Assembly.....................................108

Harrow Module Assembly (S/N GP-1202A-)...................110

Harrow Module Assembly (S/N GP-A1203A+)................112

Section 6: Decals.......................................................114

Decals.............................................................................114

Section 7: Attachments.............................................116

Reel Only Assembly (S/N GP-A1170A-).........................116

Reel Only Assembly (S/N GP-A1171A - A1202A)..........118

Reel Only Assembly (S/N GP-A1203A+)........................120

EZ Hitch Assembly..........................................................122

Heavy Duty 3 1/2 Hitch Extension...................................124

Part Number Index.....................................................126

© Copyright 2013 All rights reserved Printed 12/31/13

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains

All other brands and product names are trademarks or registered trademarks of their respective holders.

576-026P - 2 - 12/31/13

Great Plains Manufacturing, Incorporated Trademarks

Printed in the United States of America.

Table of Contents Part Number Index

Alphabetized Table of Contents

Selected Models

3

3-Section Wing Assembly, 3030...................................12

5

5-Section Outside Wing Assembly, 5036, 5042, 5048 &

5052.......................................................................18

8

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 1).....38

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 2).....40

C

Center Frame Assembly.................................................6

Center Walking Beam, 3030 & 5036............................26

Center Walking Beam, 5042, 5048 (All S/N) 5052 (S/N

A1118A-)................................................................28

Center Walking Beam, 5052 (S/N A1119A+ thru S/N

A1197A-)................................................................30

Center Walking Beam, 5052 (S/N A1198A+)...............32

Coulter Gang Assembly (S/N GP-A1202A-)...............102

Coulter Gang Assembly (S/N GP-A1203A+)..............104

D

Decals........................................................................114

Disc Gang Assembly (S/N GP-A1202A-).....................98

Disc Gang Assembly (S/N GP-A1203A+)..................100

Hydraulic Fold System, 3030 (S/N A1125A+)..............68

Hydraulic Fold System, 5036.......................................70

Hydraulic Fold System, 5042, 5048 & 5052.................72

Hydraulic Gang Layout.................................................76

Hydraulic Gauge Wheel Assembly (S/N A1118A-).......44

Hydraulic Gauge Wheel Assembly (S/N A1119A+)......46

Hydraulic Lift System, 3030 (S/N A1095A-).................52

Hydraulic Lift System, 3030 (S/N A1096A+)................54

Hydraulic Lift System, 5036 (S/N A1095A-).................56

Hydraulic Lift System, 5036 (S/N A1096A+)................58

Hydraulic Lift System, 5042, 5048, 5052 (S/N

A1095A-)................................................................60

Hydraulic Lift System, 5042, 5048, 5052 (S/N

A1096A+)...............................................................62

Hydraulic Valve Bracket Assembly 3-Section...............48

Hydraulic Valve Bracket Assembly 5-Section...............50

I

Inside Wing Fold Assembly, 5036, 5042, 5048 &

5052.......................................................................16

Inside Wing Frame Assembly, 5036, 5042, 5048 &

5052.......................................................................14

L

Lights (S/N GP-A1202A-).............................................22

Lights (S/N GP-A1203A+)............................................24

O

Outside Wing Transport, 5036......................................36

E

EZ Hitch Assembly.....................................................122

F

Front Gauge Wheel Assembly......................................42

G

Gang Depth Indicator Assembly.................................108

Gang To Gang Hanger Assembly...............................106

H

Harrow Module Assembly (S/N GP-1202A-)..............110

Harrow Module Assembly (S/N GP-A1203A+)...........112

Heavy Duty 3 1/2 Hitch Extension..............................124

Hitch Pole & Tr uss Assembly..........................................8

Hydraulic Cylinder (810-138C 4X8X1.38 Rod).............78

Hydraulic Cylinder (810-477C 3X8X1.25 Rod).............80

Hydraulic Cylinder (810-478C 3.25X8X1.25 Rod)........82

Hydraulic Cylinder (810-479C 3.25X8X1.25 Rod)........84

Hydraulic Cylinder (810-480C 3.75X8X1.38 Rod)........86

Hydraulic Cylinder (810-481C 4.25X8X1.50 Rod)........88

Hydraulic Cylinder (810-484C 3X24X1.25 Rod)...........90

Hydraulic Cylinder (810-486C 4X16X1.25 Rod)...........92

Hydraulic Cylinder (810-487C 4X24X1.5 Rod).............94

Hydraulic Cylinder (810-557C 4.50X8X1.50 Rod)........96

Hydraulic Details Assembly..........................................64

Hydraulic Fold System, 3030 (S/N A1124A-)...............66

R

Reel Only Assembly (S/N GP-A1170A-)....................116

Reel Only Assembly (S/N GP-A1171A - A1202A).....118

Reel Only Assembly (S/N GP-A1203A+)...................120

S

Self Level Assembly.....................................................10

W

Wing Walking Beam Assembly.....................................34

12/31/13 - 3 - 576-026P

Table of Contents Part Number Index

576-026P - 4 - 12/31/13

Table of Contents Part Number Index

12/31/13 - 5 - 576-026P

Table of Contents Part Number Index

Center Frame Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00520

576-026P - 6 - 12/31/13

Table of Contents Part Number Index

Center Frame Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00520

Models 3030, 5036 & 5042 (shown)CENTERFRAME 3030 5036 5042576-019H1.
Models 5048 & 5052CENTERFRAME 5048 5052576-024H1.
Models 3030 & 5036TORQUE TUBE UT3030 5036576-111H2.
Models 5042 (shown)TORQUE TUBE UT5042576-112H2.
Models 5048 & 5052TORQUE TUBE UT5048 5052576-105H2.

CENTER BRACE BAR (10' D)577-046H3.

FOLD BRKT-CNTR 5036/5042576-061H4.

PIN HINGE 1 1/4X6 HRDN PLT805-378C9.
PIN HINGE 1 1/4X7 HRDN PLT805-349C10.
HHCS 3/8-16X2 1/4 GR8 SP THD802-623C11.
NUT HEX TOP LOCK 3/8-16 PLT803-123C12.
HHCS 3/4-10X2 GR5802-064C13.
WASHER LOCK SPRING 3/4 PLT804-023C14.
NUT HEX 3/4-10 PLT803-027C15.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2806-079C16.
WASHER LOCK SPRING 5/8 PLT804-022C17.
NUT HEX 5/8-11 PLT803-021C18.

WASHER LOCK SPRING 1/2 PLT804-015C22.
NUT HEX 1/2-13 PLT803-020C23.
PIN HITCH 3/4 X 5 1/4 USEABLE805-195C24.

U-BOLT 5/8-11X4 1/32X4 1/4806-179C26.

U-BOLT 1/2-13X3 1/32X4806-066C28.
ADJUSTABLE LIGHT MOUNT BRACKET576-065H29.
LIGHT MOUNT BRKT-WING STOP RH560-065H30.
LIGHT MOUNT BRKT-WING STOP LH560-152H31.
SCREW SET SQ HD 1/2-13X1 GR5801-054C32.
BUSHING CYL 1 1/4 X 1 X 1890-005C33.
PART - SMV MOUNTING BRACKET550-071D34.
SMV SIGN POLE BRKT W/BOLTS890-823C35.
WASHER FLAT 7/16 USS PLT804-204C36.
WASHER LOCK SPRING 5/16 PLT804-009C37.
SMV SIGN POLE W/SLIDE890-822C38.
DECAL SLOW MOVING-GALV. BACKED818-055C39.
SCREW PAN HD 1/4-20 X 3/4801-005C40.
WASHER LOCK SPRING 1/4 PLT804-006C41.
NUT-HEX 1/4-20 PLT803-006C42.

Models 3030D,5036D & 5042D

(shown)
Models 5048D & 5052DCENTER BRACE BAR (12' D)577-047H3.
Models 3030C, 5036C & 5042CCENTER BRACE BAR (10' C)577-026H3.
Models 5048C & 5052CCENTER BRACE BAR (12' C)577-033H3.

(shown)
Models 5048 & 5052FOLD BRKT - CNTR (5048,52)576-087H4.

Models 5036 & 5042 (shown)CENTER WING STOP UT5036 5042576-053H5.
Models 5048 & 5052CENTER WING STOP (5048,52)576-094H6.
Models 5048 & 5052CENTER WING STOP LH (5048,52)576-095H7.
Models 5048 & 5052 (shown insert)CENTER WING STOP RH (5048,52)576-096H7.

Models 5036 & 5042CYLINDER REST PAD 4560-208H8.
Models 5048 & 5052CYLINDER REST PAD, 3 1/2560-015H8.

Models 5048 & 5052U-BOLT 5/8-11X3 1/32X4 1/2 SPT806-183C19.
Models 5048 & 5052U-BOLT 5/8-11 X 3 1/32 X 6 1/2806-178C20.
Models 5036, 5042, 5048 & 5052U-BOLT 1/2-13X3 1/32X5806-189C21.

Models 3030, 5036, 5042HINGE BRACKET576-129H25.

Model 5042CENTER WHEEL ALIGNMENT STUB576-131H27.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 1Models 3030 (front)FOLD BRKT-CNTR 3030576-086H4.
Rev. 1Models 3030 (rear), 5036 & 5042

Rev. 1Models 3030CENTER WING STOP UT3030576-088H5.

Rev. 13030 (rear only S/N A1125A+)CYLINDER REST PAD 3560-001H8.

12/31/13 - 7 - 576-026P

Table of Contents Part Number Index

Hitch Pole & Truss Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00521

576-026P - 8 - 12/31/13

Table of Contents Part Number Index

Hitch Pole & Truss Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00521

Models 3030, 5036 & 5042CENTER FRAME TRUSS550-086H1.
Models 5048 & 5052CENTER FRAME TRUSS ASSY550-087H1.

Models 5036 & 5042BRACE BAR TRUSS-TOP575-707H4.
Models 5048 & 5052BRACE BAR TRUSS CROSS575-655H4.
Models 5036, 5042, 5048 & 5052BRACE BAR TRUSS-SIDE SUPPORT551-171H5.
Models 3030ADJ JACK SWIVEL SIDEWIND 7000890-825C6.
Models 5036, 5042, 5048 & 5052ADJ JACK SWIVEL SIDEWIND 10000890-057C6.

HOSE SUPPORT550-001H7.
PIN COTTER 1/8 X 1 1/2805-225C8.

WASHER LOCK 1 1/4 SPRING PLT804-030C10.
NUT HEX 1 1/4-7 PLT803-034C11.
HHCS 1-8X5 1/2 GR5802-205C12.
WASHER LOCK SPRING 1 PLT804-027C13.
NUT HEX 1-8 PLT803-031C14.
HHCS 3/4-10X6 GR5802-070C15.
WASHER LOCK SPRING 3/4 PLT804-023C16.
NUT HEX 3/4-10 PLT803-027C17.
HHCS 3/4-10X2 GR5802-064C18.
HHCS 5/8-11X1 1/2 GR5802-051C19.
WASHER LOCK SPRING 5/8 PLT804-022C20.
NUT HEX 5/8-11 PLT803-021C21.
MANUAL PAK TUBE817-609C22.
CLAMP WORM DRIVE (3"-5")800-231C23.

PART - LIGHT KIT550-124D27.
U-BOLT 5/8-11X4 1/32X4 1/4806-179C28.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 1Models 3030HITCH STRUT ASSEMBLY575-549H2.
Rev. 1Models 5036 & 5042HITCH STRUT 5036 5042576-038H2.
Rev. 1Models 5048 & 5052HITCH STRUT 5048 5052576-039H2.
Rev. 1Models 3030HITCH POLE 3030576-089H3.
Rev. 1 & 2Models 5036 & 5042HITCH POLE 5036 5042576-027H3.
Rev. 1 & 2Models 5048 & 5052HITCH POLE 5048 5052576-028H3.

Rev. 2HHCS 1 1/4-7X7 GR8 PLT802-795C9.
Rev. 1Changed to 802-795CHHCS 1 1/4-7X6 1/2 GR8 PLT802-784C9.

Rev. 1Models 5036 & 50524" LONG 1/8 PIPE NIPPLE841-230C24.
Rev. 1Models 5036 & 50521/8 FEMALE COUPLER841-231C25.
Rev. 1Models 5036 & 5052ZERK GREASE STRAIGHT 1/8-27MPT800-130C26.

12/31/13 - 9 - 576-026P

Table of Contents Part Number Index

Self Level Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00522

576-026P - 10 - 12/31/13

Table of Contents Part Number Index

Self Level Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00522
HITCH H-BRACKET576-118H1.

Includes items 17 thru 21TURNBUCKLE ASSY 7000DV/FC CLH575-572S2.

SIDE PLATE ASSEMBLY- UT576-113H3.
HITCH TONGUE576-119H4.
HITCH BOLT (1 1/2" x 9 3/8")575-515H5.

Use as neededWASHER MACH 2.25 X 1.50 X 10GA804-063C6.

NUT HEX SLOTTED 1 1/2-6 PLT803-301C7.
PIN COTTER 1/4 X 3 PLT805-115C8.
HITCH BOLT FOR SAFETY CHAIN575-658H9.
HHCS 1-8X9 GR8 PLT802-783C10.
NUT HEX LOCK 1-8 PLT803-316C11.
PIN CLEVIS 1 X 3 3/8 USABLE805-351C12.
WASHER MACH 1.5X1.00X.075804-192C13.
PIN COTTER 3/16 X 2805-058C14.
HHCS 3/4-10X9 GR5802-164C15.
NUT LOCK 3/4-10 PLT803-026C16.
TURNBUCKLE TUBE575-529H17.
TURNBUCKLE CLVS END 1 1/2-RH576-110H18.
NUT HEX JAM 1 1/2-6 PLT803-063C19.
TURNBUCKLE T-LINK ASSEMBLY576-155S20.
NUT HEX JAM 1 1/2-6 LH THD PLT803-364C21.
TRNBCKLE WRENCH 2 5/16-1 15/16586-158D22.

For Heavy Hex Nut TurnbucklesTRNBCKL WRENCH 2 13/32-1 15/16586-256D22.
Models UT3030SAFETY CHAIN 16100 LB890-824C23.
Models UT3036 & UT5042SAFETY CHAIN 20000 LB890-183C23.
Models UT5048 & UT5052SAFETY CHAIN 30000 LB890-184C23.

SAFETY CHAIN SPACER576-048D24.
WASHER FLAT 1 1/2 SAE PLT804-071C25.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 11 - 576-026P

Table of Contents Part Number Index

3-Section Wing Assembly, 3030

(Applies to UT3030 only)

00523

576-026P - 12 - 12/31/13

Table of Contents Part Number Index

3-Section Wing Assembly, 3030

(Applies to UT3030 only)

Image No.dwg00523
INSIDE WING RH (9.5')576-035H1.
INSIDE WING LH (9.5')576-034H1.
WING BRACE RH (9.5' D) UT3030577-093H2.

WING BRACE RH (9.5' C) UT3030577-091H2.
WING BRACE LH (9.5' C) UT3030577-090H2.
LONG WING TORQUETUBE RH576-013H3.

PIN HINGE 1 1/4X6 HRDN PLT805-378C5.
HHCS 3/8-16X2 1/4 GR8 SP THD802-623C6.
NUT HEX TOP LOCK 3/8-16 PLT803-123C7.
HHCS 1-8X6 GR5802-357C8.
NUT HEX 1-8 NYLON INSERT PLT803-038C9.
HHCS 3/4-10X3 GR5802-383C10.
WASHER LOCK SPRING 3/4 PLT804-023C11.
NUT HEX 3/4-10 PLT803-027C12.
HHCS 3/4-10X2 GR5802-064C13.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2806-079C14.
WASHER LOCK SPRING 5/8 PLT804-022C15.
NUT HEX 5/8-11 PLT803-021C16.
GREASE ZERK 1/4-28 THD FORMING800-080C17.

7" ROCKER550-164D19.
PIN CLEVIS 1 X 3 3/8 USABLE805-351C20.
WASHER MACH 1.5X1.00X.075804-192C21.
PIN COTTER 3/16 X 2805-058C22.
BUSHING CYL 1 1/4 X 1 X 1890-005C23.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

(shown)WING BRACE LH (9.5' D) UT3030577-092H2.

(shown)LONG WING TORQUETUBE LH576-012H3.

Rev. 1FOLD BRACKET (3030)576-064H4.

Rev. 1(S/N A1125A+)ROCKER BRACKET560-290H18.

12/31/13 - 13 - 576-026P

Table of Contents Part Number Index

Inside Wing Frame Assembly, 5036, 5042, 5048 & 5052

(Applies to UT5036, UT5042, UT5048, UT5052 only)

00524

576-026P - 14 - 12/31/13

Table of Contents Part Number Index

Inside Wing Frame Assembly, 5036, 5042, 5048 & 5052

(Applies to UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg 00524

Model UT5036INSIDE WING RH (8.5')576-033H1.
Model UT5036INSIDE WING LH (8.5')576-032H1.
Model UT5042INSIDE WING RH (9.5')576-035H1.
Model UT5042 (shown)INSIDE WING LH (9.5')576-034H1.
Model UT5048 & UT5052INSIDE WING RH (10.5')576-037H1.
Model UT5048 & UT5052INSIDE WING LH (10.5')576-036H1.
Model UT5036DINSIDE WING BRACE RH (8.5' D)577-041H2.
Model UT5036DINSIDE WING BRACE LH (8.5' D)577-040H2.
Model UT5036CINSIDE WING BRACE RH (8.5' C)577-028H2.
Model UT5036CINSIDE WING BRACE LH (8.5' C)577-027H2.
Model UT5042DINSIDE WING BRACE RH (9.5' D)577-043H2.
Model UT5042DINSIDE WING BRACE LH (9.5' D)577-042H2.
Model UT5042CINSIDE WING BRACE RH (9.5' C)577-030H2.
Model UT5042C (shown)INSIDE WING BRACE LH (9.5' C)577-029H2.
Model UT5048D & UT5052DINSIDE WING BRACE RH (10.5' D)577-045H2.
Model UT5048D & UT5052DINSIDE WING BRACE LH (10.5' D)577-044H2.
Model UT5048C & UT5052CINSIDE WING BRACE RH (10.5' C)577-032H2.
Model UT5048C & UT5052CINSIDE WING BRACE LH (10.5' C)577-031H2.

LONG WING TORQUETUBE RH576-013H3.

(shown)LONG WING TORQUETUBE LH576-012H3.

PIN HINGE 1 1/4X6 HRDN PLT805-378C4.
HHCS 3/8-16X2 1/4 GR8 SP THD802-623C5.
NUT HEX TOP LOCK 3/8-16 PLT803-123C6.
HHCS 1-8X6 GR5802-357C7.
NUT HEX 1-8 NYLON INSERT PLT803-038C8.
HHCS 3/4-10X2 GR5802-064C9.
WASHER LOCK SPRING 3/4 PLT804-023C10.
NUT HEX 3/4-10 PLT803-027C11.

Model UT5036 & UT5042WING LOCK MOUNT560-010H12.
Model UT5048 & UT5052WING LOCK MOUNT (UT5048-52)576-128H13.

AUTOMATIC WING LATCH560-013H14.
HHCS 3/4-10X4 1/2 GR5802-192C15.
WASHER FLAT 3/4 USS PLT804-024C16.
NUT LOCK 3/4-10 PLT803-026C17.
U-BOLT 1/2-13X3 1/32X5806-189C18.
WASHER LOCK SPRING 1/2 PLT804-015C19.
NUT HEX 1/2-13 PLT803-020C20.

Model UT5042WING WHEEL ALIGNMENT STUB576-132H21.

GREASE ZERK 1/4-28 THD FORMING800-080C22.

Model UT5048 & UT5052WING STOP (UT5048,5052)576-126H23.

HHCS 1/2-13X1 1/2 GR5802-091C24.
BUSHING CYL 1 1/4 X 1 X 1890-005C25.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 15 - 576-026P

Table of Contents Part Number Index

Inside Wing Fold Assembly, 5036, 5042, 5048 & 5052

(Applies to UT5036, UT5042, UT5048, UT5052 only)

00967

576-026P - 16 - 12/31/13

Table of Contents Part Number Index

Inside Wing Fold Assembly, 5036, 5042, 5048 & 5052

(Applies to UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00967

Model UT5036FOLD BRACKET - FRONT (5036)576-062H1.
Model UT5042 (shown)FOLD BRACKET - FRONT (5042)576-054H1.
Model UT5048 & UT5052FOLD BRKT - FRONT (5048,52)576-093H1.

Coulter ModelsHINGE - WING BRACE (C) FOLD577-121H4.
Disc Models UT5048D & UT5052D180 DEGREE FOLD BRACKET-INSIDE560-016H5.
Model UT5036 & UT5042ROCKER6 1/2580-010D6.
Model UT5048 & UT50527" ROCKER550-164D6.

PIN CLEVIS 1 X 3 3/8 USABLE805-351C7.
WASHER MACH 1.5X1.00X.075804-192C8.
PIN COTTER 3/16 X 2805-058C9.
HHCS 3/4-10X3 GR5802-383C10.
WASHER LOCK SPRING 3/4 PLT804-023C11.
NUT HEX 3/4-10 PLT803-027C12.
HHCS 3/4-10X5 GR5802-069C13.
HHCS 5/8-11X1 1/2 GR5802-051C14.
WASHER LOCK SPRING 5/8 PLT804-022C15.
NUT HEX 5/8-11 PLT803-021C16.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2806-079C17.
HHCS 3/4-10X2 GR5802-064C18.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2Model UT5036FOLD BRACKET REAR 93576-135H2.
Rev. 1REP BY 576-135H576-063H2.
Rev. 2Model UT5042 (shown)FOLD BRACKET REAR 107576-136H2.
Rev. 1REP BY 576-136H576-055H2.
Rev. 2Model UT5048 & UT5052FOLD BRACKET REAR 121576-137H2.
Rev. 1REP BY 576-137H576-092H2.
Rev. 1 & 2Model UT5042, UT5048 & UT5052FOLD BRKT - AUX (5042,48,52)576-103H3.

12/31/13 - 17 - 576-026P

Table of Contents Part Number Index

5-Section Outside Wing Assembly, 5036, 5042, 5048 & 5052

(Applies to UT5036, UT5042, UT5048, UT5052 only)

00525

576-026P - 18 - 12/31/13

Table of Contents Part Number Index

5-Section Outside Wing Assembly, 5036, 5042, 5048 & 5052

(Applies to UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00525

Model UT5036OUTSIDE WING RH (4')576-017H1.
Model UT5036OUTSIDE WING LH (4')576-016H1.
Model UT5042 & UT5048OUTSIDE WING RH (6.5')576-015H1.
Model UT5042 & UT5048 (shown)OUTSIDE WING LH (6.5')576-014H1.
Model UT5052OUTSIDE WING RH (9')576-021H1.
Model UT5052OUTSIDE WING LH (9')576-020H1.
Model UT5036DOUTSIDE WING BRACE RH (4' D)577-035H2.
Model UT5036DOUTSIDE WING BRACE LH (4' D)577-034H2.
Model UT5036COUTSIDE WING BRACE RH (4' C)577-023H2.
Model UT5036COUTSIDE WING BRACE LH (4' C)577-022H2.
Model UT5042DOUTSIDE WING BRACE RH (6.5' D)577-037H2.
Model UT5042DOUTSIDE WING BRACE LH (6.5' D)577-036H2.
Model UT5042COUTSIDE WING BRACE RH (6.5' C)577-021H2.
Model UT5042C (shown)OUTSIDE WING BRACE LH (6.5' C)577-020H2.
Model UT5048DOUTSIDE WING BRACE RH (6.5' D)577-097H2.
Model UT5048DOUTSIDE WING BRACE LH (6.5' D)577-096H2.
Model UT5048COUTSIDE WING BRACE RH (6.5' C)577-095H2.
Model UT5048COUTSIDE WING BRACE LH (6.5' C)577-094H2.
Model UT5052DOUTSIDE WING BRACE RH (9' D)577-039H2.
Model UT5052DOUTSIDE WING BRACE LH (9' D)577-038H2.
Model UT5052COUTSIDE WING BRACE RH (9' C)577-025H2.
Model UT5052COUTSIDE WING BRACE LH (9' C)577-024H2.
Model UT5042, UT5048 & UT5052SHORT WING TORQUE TUBE RH576-023H3.

SHORT WING TORQUE TUBE LH576-022H3.

HINGE - WING FOLD (REAR)576-051H4.
HINGE - WING FOLD (FRONT)576-120H5.
HINGE, OUTSIDE WING560-017H6.

LINK - 9 1/4" STRAIGHT576-129D9.
PIN HINGE 1 1/4X6 HRDN PLT805-378C10.
HHCS 3/8-16X2 1/4 GR8 SP THD802-623C11.
NUT HEX TOP LOCK 3/8-16 PLT803-123C12.
HHCS 1 1/4-7X8 1/2 GR8 SPTH576-145D13.
NUT HEX 1 1/4-7 NYLON INSERT803-081C14.
1"X7" GRADE 8 SPECIAL THREAD575-164D15.
WASHER FLAT 1 USS PLT804-028C16.
COLLAR 2.5ODX1.812IDX.75576-065D17.
NUT HEX 1-8 NYLON INSERT PLT803-038C18.
HHCS 1-8X6 GR8 PLT SPCL THREAD802-715C19.
PIN 1 ODX5 HRD PLT805-129C20.
HHCS 1-8X5 1/2 GR5802-205C21.
WASHER LOCK SPRING 1 PLT804-027C22.
NUT HEX 1-8 PLT803-031C23.
HHCS 3/4-10X2 GR5802-064C24.
WASHER LOCK SPRING 3/4 PLT804-023C25.
NUT HEX 3/4-10 PLT803-027C26.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2806-079C27.
WASHER LOCK SPRING 5/8 PLT804-022C28.
NUT HEX 5/8-11 PLT803-021C29.
WING STOP "T" BRKT560-022H30.
WING LOCK T BRACKET560-081H31.

Model UT5042, UT5048 & UT5052

(shown)
Model UT5036LONG WING TORQUETUBE RH576-013H3.
Model UT5036LONG WING TORQUETUBE LH576-012H3.

Model UT5036 & UT5042ROCKER9 3/8576-064D7.
Model UT5048 & UT5052ROCKER9 3/4576-149D7.
Model UT5036 & UT5042FOLD H-BRACKET (9 3/8)576-117H8.
Model UT5048 & UT5052FOLD H-BRACKET (9 7/8)576-125H8.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 19 - 576-026P

Table of Contents Part Number Index

5-Section Outside Wing Assembly, 5036, 5042, 5048 & 5052 (continued)

(Applies to UT5036, UT5042, UT5048, UT5052 only)

RevisionCommentsPart DescriptionPart No.Ref.

U-BOLT 5/8-11X4 1/32X4 1/4806-179C32.
U-BOLT 1/2-13X3 1/32X5806-189C33.
WASHER LOCK SPRING 1/2 PLT804-015C34.
NUT HEX 1/2-13 PLT803-020C35.
GREASE ZERK 1/4-28 THD FORMING800-080C36.
PLASTIC END CAP - 4X3X1/4 TUBE817-585C37.
BUSHING CYL 1 1/4 X 1 X 1890-005C38.

576-026P - 20 - 12/31/13

Table of Contents Part Number Index

Section 2: Frames

5-Section Outside Wing Assembly, 5036, 5042, 5048 & 5052 (continued)

(Applies to UT5036, UT5042, UT5048, UT5052 only)

This Page Intentionally Left Blank

12/31/13 - 21 - 576-026P

Table of Contents Part Number Index

Lights (S/N GP-A1202A-)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

01273

576-026P - 22 - 12/31/13

Table of Contents Part Number Index

Lights (S/N GP-A1202A-)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg01273
LEAD HARNESS W/TRAC HKUP 25FT890-831C1.
WISHBONE WIRING HARNESS(SHORT)890-830C2.
LIGHT ONE-WAY RED890-828C3.
LIGHT TWO-WAY AMBER890-829C4.
SAFETY LIGHT KIT (LONG LEAD)890-826C5.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 23 - 576-026P

Table of Contents Part Number Index

Lights (S/N GP-A1203A+)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

43274

576-026P - 24 - 12/31/13

Table of Contents Part Number Index

Lights (S/N GP-A1203A+)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg43274
AG LIGHT WIRING HRNSS-25' - LED833-682C1.
LIGHT HRNSS ENHANCE MODULE LED833-694C2.
WISHBONE WIRING HRNSS - SHRT LED833-720C3.
PEDESTAL SAFETY LAMP RED LED833-721C4.
PEDESTAL SAFETY LAMP AMBER LED833-722C5.

Section 2: Frames

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 25 - 576-026P

Table of Contents Part Number Index

Center Walking Beam, 3030 & 5036

(Applies to UT3030, UT5036 only)

00526

576-026P - 26 - 12/31/13

Table of Contents Part Number Index

Center Walking Beam, 3030 & 5036

(Applies to UT3030, UT5036 only)

Image No.dwg00526
PIVOTSPINDLE 2 1/2 X 10580-191D1.
SEAL 2.50IDX3.251DX.47T816-573C2.
BRG CONE 1.97ID JLM104948822-226C3.
BRG CUP JLM104910822-225C4.
WALKING BEAM560-126H5.
GREASE ZERK 1/4-28 THD FORMING800-080C6.
BRG CUP 2.89ODX.58WD #LM501310822-053C7.
BRG CONE 1.62IDX.78WD#LM501349822-048C8.
WASHER FLAT 7/8 GRD 8 2 1/4 OD804-193C9.
WASHER SPINDLE - 7/8804-055C10.
PIN COTTER 5/32 X 1 1/2 LONG805-089C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
GREASE CAP 3.153X1.468X.312890-886C13.

WASHER LOCK SPRING 5/16 PLT804-009C17.
NUT HEX 5/16-18 PLT803-008C18.
WHEEL 15X8 8 BOLT WHITE814-222C19.
TIRE 11LX15 LOAD F814-226C20.

NUT LUG 5/8-18 X 90 DEG PLT803-219C22.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 1 thru 13WALKING BEAM ASSEMBLY CENTER560-128L14.
See pg. 3-11 for partsHUB 8-BOLT SPNDL 2.25X16.5 458815-226C15.

Rev. 2Revision date 6/20/05HHCS 5/16-18X4 GR8 PLT802-802C16.
Rev. 1Changed to 802-802CHHCS 5/16-18X4 GR5802-279C16.

Includes items 19 & 20TIRE/WHL 11LX15 LOAD F 8BLT WH814-235C21.

12/31/13 - 27 - 576-026P

Table of Contents Part Number Index

Center Walking Beam, 5042, 5048 (All S/N) 5052 (S/N A1118A-)

(Applies to UT5042, UT5048, UT5052 only)

00527

576-026P - 28 - 12/31/13

Table of Contents Part Number Index

Center Walking Beam, 5042, 5048 (All S/N) 5052 (S/N A1118A-)

(Applies to UT5042, UT5048, UT5052 only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg00527
PIVOTSPINDLE 3 X 10 1/2570-054D1.
SEAL OIL CR27362 3.75X2.75X.44816-220C2.
BRG CONE 2.16ID JLM506849822-110C3.
BRG CUP 3.54OD JLM506810822-109C4.

Assembled on left side (shown)CENTER WALKING BEAM RH576-107H5.
Assembled on rightsideCENTER WALKING BEAM LH576-106H5.

GREASE ZERK 1/4-28 THD FORMING800-080C6.
BRG CUP 2.89ODX.58WD #LM501310822-053C7.
BRG CONE 1.62IDX.78WD#LM501349822-048C8.
1 HARDENED SPINDLE WASHER148-404D9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
NUT HEX SLOTTED 1-14803-095C11.
GREASE CAP 3.125 X .38890-277C12.

Includes items 1 thru 12 (shown)CENTER WALKING BEAM RH ASSY576-109L13.
Includes items 1 thru 12CENTER WALKINGBEAM LH ASSY576-108L13.
UT5042 See pg. 3-9 for partsHUB 8-BOLTSPINDLE 2.75X17 608815-251C14.
UT5048 & UT5052 See pg. 3-11HUB 8-BOLT SPINDLE 2.75X19 608815-252C14.

HHCS 1/2-13X4 1/2 GR5802-413C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.

Rev. 2Revision date 6/20/05HHCS 5/16-18X4 1/2 GR8 PLT802-803C18.

Rev. 1Changed to 802-803CHHCS 5/16-18X4 1/2 GR5802-474C18.
WASHER LOCK SPRING 5/16 PLT804-009C19.
NUT HEX 5/16-18 PLT803-008C20.

Model UT5042WHEEL 15X10 8 BOLT WHITE814-223C21.
Model UT5042TIRE 12.5LX15 LOAD F814-227C22.
Includes items 21 & 22TIRE/WHL 12.5LX15 LD F WHT GYR814-236C23.

NUT LUG 5/8-18 X 90 DEG PLT803-219C24.

Model UT5048 UT5052WHEEL 16.5X12 8BOLT 6PILOT WHT814-251C25.
Model UT5048 UT5052TIRE SKID ST 395/55B16.5 NHS814-206C26.
Include items 25 & 26RH T/WHL 395/55B16.5 SKID8 WHT814-249C27.
Include items 25 & 26LH T/WHL 395/55B16.5 SKID8 WHT814-250C28.

Section 3:Transport

12/31/13 - 29 - 576-026P

Table of Contents Part Number Index

Center Walking Beam, 5052 (S/N A1119A+ thru S/N A1197A-)

(Applies to UT5052 only)

01012

576-026P - 30 - 12/31/13

Table of Contents Part Number Index

Center Walking Beam, 5052 (S/N A1119A+ thru S/N A1197A-)

(Applies to UT5052 only)

Image No.dwg41012
PIVOTSPINDLE 3 X 10 1/2570-054D1.
SEAL OIL TCM #27383TB816-581C2.
BRG CONE 2.17ID JM207049822-230C3.
BRG CUP JM207010822-229C4.

(shown)CENTER WALKING BEAM LH576-138H5.
CENTER WALKING BEAM RH576-139H5.
GREASE ZERK 1/4-28 THD FORMING800-080C6.
BRG CUP TIMKEN #26823822-234C7.
BRG CONE 1.62IDX.78WD#LM501349822-048C8.
1 HARDENED SPINDLE WASHER148-404D9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
NUT HEX SLOTTED 1-14803-095C11.
GREASE CAP 3.125 X .38890-277C12.

Includes items 1 thru 12 (shown)CENTER WALKING BEAM LH ASSY576-140L13.

Includes items 1 thru 12CENTER WALKINGBEAM RH ASSY576-141L13.

See 8-Bolt hub & spindle, part2HUB8-BOLTSPINDLE 2.75X19 608815-252C14.
HHCS 1/2-13X4 1/2 GR5802-413C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.
HHCS 5/16-18X4 1/2 GR8 PLT802-803C18.
WASHER LOCK SPRING 5/16 PLT804-009C19.
NUT HEX 5/16-18 PLT803-008C20.
WHEEL 16.5X12 8BOLT 6PILOT WHT814-251C21.
TIRE SKID ST 395/55B16.5 NHS814-206C22.

Include items 21 & 22 (shown)RH T/WHL 395/55B16.5 SKID8 WHT814-249C23.

Include items 21 & 22LH T/WHL 395/55B16.5 SKID8 WHT814-250C23.
NUT LUG 5/8-18 X 90 DEG PLT803-219C24.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 31 - 576-026P

Table of Contents Part Number Index

Center Walking Beam, 5052 (S/N A1198A+)

(Applies to UT5052 only)

43176

576-026P - 32 - 12/31/13

Table of Contents Part Number Index

Center Walking Beam, 5052 (S/N A1198A+)

(Applies to UT5052 only)

Image No.dwg43176
PIVOTSPINDLE 3 X 10 1/2570-054D1.
SEAL OIL TCM #27383TB816-581C2.
BRG CONE 2.17ID JM207049822-230C3.
BRG CUP JM207010822-229C4.

(shown)CENTER WALKING BEAM LH576-138H5.
CENTER WALKING BEAM RH576-139H5.
GREASE ZERK 1/4-28 THD FORMING800-080C6.
BRG CUP TIMKEN #26823822-234C7.
BRG CONE 1.62IDX.78WD#LM501349822-048C8.
1 HARDENED SPINDLE WASHER148-404D9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
NUT HEX SLOTTED 1-14803-095C11.
GREASE CAP 3.125 X .38890-277C12.

Includes items 1 thru 12 (shown)CENTER WALKING BEAM LH ASSY576-140L13.

Includes items 1 thru 12CENTER WALKINGBEAM RH ASSY576-141L13.

See 8-Bolt hub & spindle, part2HUB8-BOLTSPINDLE 2.75X19 608815-252C14.
HHCS 1/2-13X4 1/2 GR5802-413C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.
HHCS 5/16-18X4 1/2 GR8 PLT802-803C18.
WASHER LOCK SPRING 5/16 PLT804-009C19.
NUT HEX 5/16-18 PLT803-008C20.
WHEEL 16.5X12 8BOLT 6PILOT WHT814-291C21.
TIRE TITAN 380/55R16.5814-387C22.

Include items 21 & 22TIRE/WHL 380/55R16.5 OFF WT814-388C23.
NUT LUG 5/8-18 X 90 DEG PLT803-219C24.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 33 - 576-026P

Table of Contents Part Number Index

Wing Walking Beam Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00528

576-026P - 34 - 12/31/13

Table of Contents Part Number Index

Wing Walking Beam Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00528
PIVOTSPINDLE 2X8 1/16550-015D1.
SEAL (CR16286)816-398C2.
SEAL SLEEVE (CR081071)816-396C3.
INNER CONE, JL69349822-198C4.
INNER CUP JL69310822-197C5.
WALKING BEAM560-035H6.
GREASE ZERK 1/4-28 THD FORMING800-080C7.
BEARING CUP LM-67010822-020C8.
BEARING CONE LM-67048822-021C9.
WASHER SPINDLE - 7/8804-055C10.
NUT HEX SLOTTED 7/8-14 PLT803-029C11.
PIN COTTER 5/32 X 1 1/2 LONG805-089C12.
GREASE CAP 2.448X1.12X.25890-781C13.
HUB 6-BOLT SPINDLE 2X15 890815-223C14.
HUB 6-BOLT SPINDLE 2X16 890815-224C15.
PIN CLEVIS 5/16X2 13/16 USABLE805-324C16.
PIN COTTER 1/8 X 1805-363C17.
WALKING BEAM HUB ASSEMBLY576-018L18.
WHEEL 15X8 6 BOLT WHITE814-221C19.
TIRE 11L-15 X 8 PLY814-038C20.
TIRE/WHL 11LX15 8PLY 6BLTWHT814-232C21.
NUT LUG 9/16-18 X 90 PLT803-061C22.
NUT LUG 1/2-20X90DEG PLT 13/16803-017C22.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 35 - 576-026P

Table of Contents Part Number Index

Outside Wing Transport, 5036

(Applies to UT5036 only)

00529

576-026P - 36 - 12/31/13

Table of Contents Part Number Index

Outside Wing Transport, 5036

(Applies to UT5036 only)

Image No.dwg00529
AXLE SPINDLE 2X16 (Q783)550-020D1.
SEAL GREASE 6-BLT HD HUB W-783816-426C2.
BRG CONE 1.62IDX.78WD#LM501349822-048C3.
BRG CUP 2.89ODX.58WD #LM501310822-053C4.
ZERK GREASE STRAIGHT 1/8-27MPT800-130C5.

BEARING CUP LM-67010822-020C7.
BEARING CONE LM-67048822-021C8.
WASHER SPINDLE - 7/8804-055C9.
PIN COTTER 5/32 X 1 1/2 LONG805-089C10.
NUT HEX SLOTTED 7/8-14 PLT803-029C11.
GREASE CAP 2.448X1.12X.25890-781C12.

PIN CLEVIS 5/16X2 13/16 USABLE805-324C16.
PIN COTTER 1/8 X 1805-363C17.
WHEEL 15X8 6 BOLT WHITE814-221C18.
TIRE 11L-15 X 8 PLY814-038C19.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 1Revision date 6/29/05HUB 890 W/CUPS 6-BOLTS 6" BC815-193C6.

Rev. 2Revision date 6/29/05HUB STUD 9/16-18X2 1/8 J1102802-799C13.
Rev. 1Changed to 802-799CHUB STUD 1/2-20X1 5/8 GR5802-135C13.
Rev. 2Revision date 6/29/05NUT LUG 9/16-18 X 90 PLT803-061C14.
Rev. 1Changed to 803-061CNUT LUG 1/2-20X90DEG PLT 13/16803-017C14.

Includes items 1 thru 14HUB 6-BOLT SPINDLE 2X16 890815-224C15.

Includes items 18 & 19TIRE/WHL 11LX15 8PLY 6BLTWHT814-232C20.

12/31/13 - 37 - 576-026P

Table of Contents Part Number Index

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 1)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00241

576-026P - 38 - 12/31/13

Table of Contents Part Number Index

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 1)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00241
AXLE SPINDLE 2.25X16.5 Q45-8B560-236D1.

820-293C 1.78ID LM603049822-169C3.
BRG CUP 3.06OD LM603011822-168C4.
ZERK GREASE STRAIGHT 1/8-27MPT800-130C5.
HUB 458 W/CUPS 8-BOLTS 8" BC815-229C6.
BEARING CUP LM-67010822-020C7.
BEARING CONE LM-67048822-021C8.
WASHER FLAT 3/4 HARD USS804-008C9.
PIN COTTER 5/32 X 1 1/2 LONG805-089C10.
NUT HEX SLOTTED 3/4-16803-053C11.
GREASE CAP 2.448X1.12X.25890-781C12.
HUB STUD 5/8-18X2 1/2 GR5802-182C13.
NUT LUG 5/8-18 X 90 DEG PLT803-219C14.
HUB 8-BOLT SPNDL 2.25X16.5 458815-226C15.

Items 1 thru 14, UT3030 & 5036

Center

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2HUB SEAL Q458 (TCM 223063TB-H)816-529C2.
Rev. 1Changed to 816-529CREP BY 816-529C816-445C2.

12/31/13 - 39 - 576-026P

Table of Contents Part Number Index

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 2)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00241

576-026P - 40 - 12/31/13

Table of Contents Part Number Index

8 & 6-Bolt Heavy Hub & Spindle Assembly (Part 2)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00241
AXLE SPINDLE 2 3/4X17 (Q60-8)576-114D1.
AXLE SPINDLE 2 3/4X19 (Q60-8)576-115D1.
SEAL OIL CR27362 3.75X2.75X.44816-220C2.
BRG CONE 2.16ID JLM506849822-110C3.
BRG CUP 3.54OD JLM506810822-109C4.
ZERK GREASE STRAIGHT 1/8-27MPT800-130C5.
HUB 608 W/CUPS 8-BOLTS 8" BC815-164C6.
BRG CUP 2.89ODX.58WD #LM501310822-053C7.
BRG CONE 1.62IDX.78WD#LM501349822-048C8.
1 HARDENED SPINDLE WASHER148-404D9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
NUT HEX SLOTTED 1-14803-095C11.
GREASE CAP 3.125 X .38890-277C12.
HUB STUD 5/8-18X2 1/2 GR5802-182C13.
NUT LUG 5/8-18 X 90 DEG PLT803-219C14.

Items 1 thru 14, UT5042 CenterHUB 8-BOLTSPINDLE 2.75X17 608815-251C15.
HUB 8-BOLT SPINDLE 2.75X19 608815-252C15.

AXLE SPINDLE 2X15 (Q783)560-243D16.
AXLE SPINDLE 2X16 (Q783)550-020D16.
SEAL GREASE 6-BLT HD HUB W-783816-426C17.
BRG CONE 1.62IDX.78WD#LM501349822-048C18.
BRG CUP 2.89ODX.58WD #LM501310822-053C19.
ZERK GREASE STRAIGHT 1/8-27MPT800-130C20.

BEARING CUP LM-67010822-020C22.
BEARING CONE LM-67048822-021C23.
WASHER SPINDLE - 7/8804-055C24.
PIN COTTER 5/32 X 1 1/2 LONG805-089C25.
NUT HEX SLOTTED 7/8-14 PLT803-029C26.
GREASE CAP 2.448X1.12X.25890-781C27.

HUB 6-BOLT SPINDLE 2X15 890815-223C30.

HUB 6-BOLT SPINDLE 2X16 890815-224C30.

Items 1 thru 14, UT5048 & 5052

Center

Items 16 thru 29, Frontsideof walking

tandems

Items 16 thru 29,Back side of walking

tandems

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 1HUB 890 W/CUPS 6-BOLTS 6" BC815-193C21.

Rev. 2Revision date 6/29/05HUB STUD 9/16-18X2 1/8 J1102802-799C28.
Rev. 1Changed to 802-799CHUB STUD 1/2-20X1 5/8 GR5802-135C28.
Rev. 2Revision date 6/29/05NUT LUG 9/16-18 X 90 PLT803-061C29.
Rev. 1Changed to 803-061CNUT LUG 1/2-20X90DEG PLT 13/16803-017C29.

12/31/13 - 41 - 576-026P

Table of Contents Part Number Index

Front Gauge Wheel Assembly

(Applies to UT3030, UT5036 only)

00011

576-026P - 42 - 12/31/13

Table of Contents Part Number Index

Front Gauge Wheel Assembly

(Applies to UT3030, UT5036 only)

Image No.dwg 00011
GAUGE WHEEL BRACKET570-196H1.
U-BOLT 5/8-11X4 1/32X4 1/4806-179C2.
WASHER LOCK SPRING 5/8 PLT804-022C3.
NUT HEX 5/8-11 PLT803-021C4.
GAUGE WHEEL ARM570-195H5.
SEAL GREASE 4-BLT 633 HUB816-498C6.
BEARING CONE LM-67048822-021C7.
BEARING CUP LM-67010822-020C8.
HUB 633 W/CUPS 4-BOLTS 5" BC815-262C9.
BRG CUP 1.78ODX.46WD #LM11910822-050C10.
BRG CONE .75IDX.65WD #LM11949822-045C11.
WASHER 3/4 HARDENED STEEL804-093C12.
PIN COTTER 1/8 X 1 1/4 PLT805-109C13.
NUT HEX SLOTTED 3/4-16803-053C14.
GREASE CAP 1.956X.937X.312890-887C15.
BOLT WHEEL 1/2-20X1 90-DEG802-104C16.

HHCS 1/2-13X1 1/4 GR5802-034C19.
HHCS 5/8-11X1 1/2 GR5802-051C20.
WHEEL 15X4.5 4 BOLT WHITE814-218C21.
TIRE 6.70L-15 4 PLY814-180C22.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 5 thru 16GAUGE WHEEL ARM/HUB ASSEMBLY570-194S17.

Rev. 2PIN HITCH 3/4 X 4 3/8805-081C18.
Rev. 1Changed to 805-081CPIN HITCH 3/4 X 5 1/4 USEABLE805-195C18.

Includes items 21 & 22TIRE/WHEEL 6.70X15 4 PLY WHITE814-228C23.

(pair) Includes items 1 thru22GAUGE WHEEL W/ TIRES570-183A24.

(pair) Includes items 1 thru20GAUGE WHEEL W/O TIRES570-182A24.

12/31/13 - 43 - 576-026P

Table of Contents Part Number Index

Hydraulic Gauge Wheel Assembly (S/N A1118A-)

(Applies to UT5042, UT5048, UT5052 only)

00456

576-026P - 44 - 12/31/13

Table of Contents Part Number Index

Hydraulic Gauge Wheel Assembly (S/N A1118A-)

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg00456
GAUGE WHEEL ARM MOUNT CLEVIS550-110H1.
LINKAGE ARM550-101H2.
LINKAGE ARM W/LEVER550-102H3.
HYD GAUGE WHEEL BRACE RH550-158H4.

(shown)HYD GAUGE WHEEL BRACE LH550-096H4.
PIVOTBRACKET550-090H5.

HHCS 1-8X7 GR5802-075C7.
NUT HEX 1-8 NYLON INSERT PLT803-038C8.
HHCS 1-8X6 GR5802-357C9.
HHCS 5/8-11X1 1/2 GR5802-051C10.
WASHER LOCK SPRING 5/8 PLT804-022C11.
NUT HEX 5/8-11 PLT803-021C12.
FRICTION CAP550-108H13.
SPRING, TOP, HEAVYDA0057A14.
SPRING COVER550-116H15.
NUT HEX 3/4-10 PLT803-027C16.
NUT HEX JAM 3/4-10 PLT803-048C17.
GREASE ZERK 1/4-28 THD FORMING800-080C18.
PIN CLEVIS 5/16X2 13/16 USABLE805-324C19.
PIN COTTER 1/8 X 1805-363C20.
9 7/8 SPINDLE (Q888)550-016D21.
SEAL (CR16286)816-398C22.
SEAL SLEEVE (CR081071)816-396C23.
INNER CONE, JL69349822-198C24.
INNER CUP JL69310822-197C25.
ZERK GREASE STRAIGHT 1/8-27MPT800-130C26.
HUB 888 W/CUPS 6-BOLTS 6" BC815-142C27.
BEARING CUP LM-67010822-020C28.
BEARING CONE LM-67048822-021C29.
WASHER SPINDLE - 7/8804-055C30.
PIN COTTER 5/32 X 1 1/2 LONG805-089C31.
NUT HEX SLOTTED 7/8-14 PLT803-029C32.
GREASE CAP 2.448X1.12X.25890-781C33.
WHEEL BOLT 1/2-20X1 1/4 GR5802-632C34.

Includes items 21 thru 34HUB 6-BOLT SPINDLE 2X9.88 888815-219C35.
WHEEL 10X6 6/6 4.62 PH.18INSET814-219C36.
TIRE 7.50X10 10 PLY814-224C37.

Includes items 36 & 37TIRE/WHL 7.5X10 10PLY W/TB WHT814-229C38.
1 1/4 X 1 X 3/4 HDR BUSHING890-143C39.
BUSHING CYL 1 1/4 X 1 X 1890-005C40.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 1GAUGE WHEEL ARM RH550-109H6.
Rev. 1(shown)GAUGE WHEEL ARM LH550-111H6.

12/31/13 - 45 - 576-026P

Table of Contents Part Number Index

Hydraulic Gauge Wheel Assembly (S/N A1119A+)

(Applies to UT5042, UT5048, UT5052 only)

00981

576-026P - 46 - 12/31/13

Table of Contents Part Number Index

Hydraulic Gauge Wheel Assembly (S/N A1119A+)

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg00981
GAUGE WHEEL ARM MOUNT CLEVIS550-110H1.

Model UT5042 & UT5052GAUGE WHEEL ARM RH550-396H2.

Model UT5042 & UT5052GAUGE WHEEL ARM LH550-397H2.

Model UT5042 & UT5052GAUGE WHEEL ARM W/LEVER RH550-398H3.

Model UT5042 & UT5052 (shown)GAUGE WHEEL ARM W/LEVER LH550-399H3.

Model UT5042 & UT5052BUSHING 1OD X 3/4 ID550-556D4.

Model UT5042 & UT5052PIVOT BRACKET550-395H5.
GAUGE WHEEL ARM RH550-109H6.

(shown)GAUGE WHEEL ARM LH550-111H6.

Model UT5042 & UT5052HHCS 3/4-10X4 1/2 GR5802-192C7.

Model UT5042 & UT5052WASHER LOCK SPRING 3/4 PLT804-023C8.

Model UT5042 & UT5052NUT HEX 3/4-10 PLT803-027C9.
HHCS 1-8X6 GR5802-357C10.
NUT HEX 1-8 NYLON INSERT PLT803-038C11.
HHCS 5/8-11X1 1/2 GR5802-051C12.
WASHER LOCK SPRING 5/8 PLT804-022C13.
NUT HEX 5/8-11 PLT803-021C14.
FRICTION CAP550-108H15.
SPRING, TOP, HEAVYDA0057A16.
SPRING COVER550-116H17.
NUT HEX 3/4-10 PLT803-027C18.
NUT HEX JAM 3/4-10 PLT803-048C19.
GREASE ZERK 1/4-28 THD FORMING800-080C20.
PIN CLEVIS 5/16X2 13/16 USABLE805-324C21.
PIN COTTER 1/8 X 1805-363C22.
9 7/8 SPINDLE (Q888)550-016D23.
SEAL (CR16286)816-398C24.
SEAL SLEEVE (CR081071)816-396C25.
INNER CONE, JL69349822-198C26.
INNER CUP JL69310822-197C27.
ZERK GREASE STRAIGHT 1/8-27MPT800-130C28.
HUB 888 W/CUPS 6-BOLTS 6" BC815-142C29.
BEARING CUP LM-67010822-020C30.
BEARING CONE LM-67048822-021C31.
WASHER SPINDLE - 7/8804-055C32.
PIN COTTER 5/32 X 1 1/2 LONG805-089C33.
NUT HEX SLOTTED 7/8-14 PLT803-029C34.
GREASE CAP 2.448X1.12X.25890-781C35.
WHEEL BOLT 1/2-20X1 1/4 GR5802-632C36.

Includes items 23 thru 36HUB 6-BOLT SPINDLE 2X9.88 888815-219C37.
WHEEL 10X6 6/6 4.62 PH.18INSET814-219C38.
TIRE 7.50X10 10 PLY814-224C39.

Includes items 36 & 37TIRE/WHL 7.5X10 10PLY W/TB WHT814-229C40.

Model UT5042 & UT5052BUSHING CYL 1 1/4 X 1 X 1890-005C41.

Section 3:Transport

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 47 - 576-026P

Table of Contents Part Number Index

Hydraulic Valve Bracket Assembly 3-Section

(Applies to UT3030 only)

00530

576-026P - 48 - 12/31/13

Table of Contents Part Number Index

Hydraulic Valve Bracket Assembly 3-Section

(Applies to UT3030 only)

Image No.dwg00530
REBOUND VALVE SHORT MOUNT BRKT575-041D1.
REBOUND VALVE MOUNT PLATE560-035D2.
REBOUND VALVE TALL MOUNT BRKT575-047D3.
COUNTERBALANCE VALVE MAN. T.T.810-116C4.

Seal Kit # 810-515CHYD BYPASS /W WT. TRANS REDUCT810-512C5.
SEAL KIT SHOEMAKER # 5457810-515C5.
HHCS 1/2-13X4 1/2 GR5802-413C6.
WASHER LOCK SPRING 1/2 PLT804-015C7.
NUT HEX 1/2-13 PLT803-020C8.
HHCS 1/2-13X4 1/2 GR5802-413C9.
HHCS 5/16-18X4 GR5802-279C10.
WASHER LOCK SPRING 5/16 PLT804-009C11.
NUT HEX 5/16-18 PLT803-008C12.
HHCS 5/16-18X3 GR5802-131C13.
DECAL INSIDE WING VALVE838-718C14.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 49 - 576-026P

Table of Contents Part Number Index

Hydraulic Valve Bracket Assembly 5-Section

(Applies to UT5036, UT5042, UT5048, UT5052 only)

00531

576-026P - 50 - 12/31/13

Table of Contents Part Number Index

Hydraulic Valve Bracket Assembly 5-Section

(Applies to UT5036, UT5042, UT5048, UT5052 only)

Image No. 00531dwg
REBOUND VALVE SHORT MOUNT BRKT575-041D1.
REBOUND VALVE MOUNT PLATE560-035D2.
REBOUND VALVE TALL MOUNT BRKT575-047D3.
COUNTERBALANCE VALVE MAN. T.T.810-116C4.
VALVE PRESS REDUCING W/CHECK810-301C5.
HYDRAULIC BYPASS VALVE810-432C6.
HHCS 1/2-13X4 1/2 GR5802-413C7.
WASHER LOCK SPRING 1/2 PLT804-015C8.
NUT HEX 1/2-13 PLT803-020C9.

Models 5036C & 5042CHHCS 1/2-13X4 1/2 GR5802-413C10.

Disc Models & 5048C & 5052CHHCS 1/2-13X5 1/2 GR5802-046C10.
HHCS 1/2-13X6 1/2 GR5802-323C11.
HHCS 5/16-18X4 GR5802-279C12.
WASHER LOCK SPRING 5/16 PLT804-009C13.
NUT HEX 5/16-18 PLT803-008C14.
HHCS 5/16-18X3 GR5802-131C15.
HHCS 1/4-20X2 1/2 GR5802-097C16.
WASHER FLAT 1/4 SAE PLT804-007C17.
WASHER LOCK SPRING 1/4 PLT804-006C18.
NUT-HEX 1/4-20 PLT803-006C19.
DECAL INSIDE WING VALVE838-718C20.
DECAL OUTSIDE WING VALVE838-719C21.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 51 - 576-026P

Table of Contents Part Number Index

Hydraulic Lift System, 3030 (S/N A1095A-)

(Applies to UT3030 only)

00465

576-026P - 52 - 12/31/13

Table of Contents Part Number Index

Hydraulic Lift System, 3030 (S/N A1095A-)

(Applies to UT3030 only)

Image No.dwg00465

GP Seal Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C1.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C1.

GP Seal Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C2.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C2.

GP Seal Kit# 810-211CCYL REP 3X8X1.25 ROD TIE 3000#810-477C3.
SEAL KIT MW 3 RPHCYL 4A1104810-211C3.
COUNTERBALANCE VALVE MAN. T.T.810-116C4.
AD 3/4MORB 3/4MJIC811-088C5.
EL 3/4MJIC 3/4MORB811-063C6.
TE 3/4MJIC811-078C7.
HH3/8R2 147 3/4MORB 3/4FJIC811-893C8.
HH3/8R2 075 3/4FJIC811-993C9.
HH3/8R2 045 3/4FJIC811-731C10.
HH3/8R2 116 3/4FJIC811-247C11.
HH3/8R2 252 3/4FJIC811-887C12.
HH3/8R2 021 3/4FJIC811-643C13.
HG HANDLE - BLACK EXT811-826C14.
HG HANDLE - BLACK RET811-913C15.
AD 3/4MORB 3/4FORB (HG)811-919C16.

Includes items 14 thru 16HG PAIR - BLACK MORB-FORB548-001S17.
CP 3/4FORB MALE QD POPPET TYPE811-394C18.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D19.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D19.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 53 - 576-026P

Table of Contents Part Number Index

Hydraulic Lift System, 3030 (S/N A1096A+)

(Applies to UT3030 only)

00465

576-026P - 54 - 12/31/13

Table of Contents Part Number Index

Hydraulic Lift System, 3030 (S/N A1096A+)

(Applies to UT3030 only)

Image No. 00465dwg

GP Seal Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C1.
SEAL KIT MW 3.75X1.375 4A4103810-373C1.

GP Seal Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C2.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C2.

GP Seal Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C3.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C3.
COUNTERBALANCE VALVE MAN. T.T.810-116C4.
AD 3/4MORB 3/4MJIC811-088C5.
EL 3/4MJIC 3/4MORB811-063C6.
TE 3/4MJIC811-078C7.
HH3/8R2 147 3/4MORB 3/4FJIC811-893C8.
HH3/8R2 075 3/4FJIC811-993C9.
HH3/8R2 045 3/4FJIC811-731C10.
HH3/8R2 116 3/4FJIC811-247C11.
HH3/8R2 252 3/4FJIC811-887C12.
HH3/8R2 021 3/4FJIC811-643C13.
HG HANDLE - BLACK EXT811-826C14.
HG HANDLE - BLACK RET811-913C15.
AD 3/4MORB 3/4FORB (HG)811-919C16.

Includes items 14 thru 16HG PAIR - BLACK MORB-FORB548-001S17.
CP 3/4FORB MALE QD POPPET TYPE811-394C18.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D19.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D19.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 55 - 576-026P

Table of Contents Part Number Index

Hydraulic Lift System, 5036 (S/N A1095A-)

(Applies to UT5036 only)

00477

576-026P - 56 - 12/31/13

Table of Contents Part Number Index

Hydraulic Lift System, 5036 (S/N A1095A-)

(Applies to UT5036 only)

Image No.dwg00477

GP Seal Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C1.
SEAL KIT MW 3.75X1.375 4A4103810-373C1.

GP Seal Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C2.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C2.

GP Seal Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C3.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C3.

GP Seal Kit# 810-211CCYL REP 3X8X1.25 ROD TIE 3000#810-477C4.
SEAL KIT MW 3 RPHCYL 4A1104810-211C4.
COUNTERBALANCE VALVE MAN. T.T.810-116C5.
AD 3/4MORB 3/4MJIC811-088C6.
EL 3/4MJIC 3/4MORB811-063C7.
TE 3/4MJIC811-078C8.
HH3/8R2 147 3/4MORB 3/4FJIC811-893C9.
HH3/8R2 075 3/4FJIC811-993C10.
HH3/8R2 045 3/4FJIC811-731C11.
HH3/8R2 099 3/4FJIC811-671C12.
HH3/8R2 309 3/4FJIC811-904C13.
HH3/8R2 021 3/4FJIC811-643C14.
HG HANDLE - BLACK EXT811-826C15.
HG HANDLE - BLACK RET811-913C16.
AD 3/4MORB 3/4FORB (HG)811-919C17.

Includes items 15 thru 17HG PAIR - BLACK MORB-FORB548-001S18.
CP 3/4FORB MALE QD POPPET TYPE811-394C19.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D20.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D20.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 57 - 576-026P

Table of Contents Part Number Index

Hydraulic Lift System, 5036 (S/N A1096A+)

(Applies to UT5036 only)

00477

576-026P - 58 - 12/31/13

Table of Contents Part Number Index

Hydraulic Lift System, 5036 (S/N A1096A+)

(Applies to UT5036 only)

Image No.dwg00477

GP Seal Kit# 810-151CCYL REP 4X8X1.38 ROD TIE 3000#810-138C1.
SEAL KIT MW 4 RPH CYL 4A5103810-151C1.

GP Seal Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C2.
SEAL KIT MW 3.75X1.375 4A4103810-373C2.

GP Seal Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C3.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C3.

GP Seal Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C4.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C4.
COUNTERBALANCE VALVE MAN. T.T.810-116C5.
AD 3/4MORB 3/4MJIC811-088C6.
EL 3/4MJIC 3/4MORB811-063C7.
TE 3/4MJIC811-078C8.
HH3/8R2 147 3/4MORB 3/4FJIC811-893C9.
HH3/8R2 075 3/4FJIC811-993C10.
HH3/8R2 045 3/4FJIC811-731C11.
HH3/8R2 099 3/4FJIC811-671C12.
HH3/8R2 309 3/4FJIC811-904C13.
HH3/8R2 021 3/4FJIC811-643C14.
HG HANDLE - BLACK EXT811-826C15.
HG HANDLE - BLACK RET811-913C16.
AD 3/4MORB 3/4FORB (HG)811-919C17.

Includes items 15 thru 17HG PAIR - BLACK MORB-FORB548-001S18.
CP 3/4FORB MALE QD POPPET TYPE811-394C19.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D20.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D20.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 59 - 576-026P

Table of Contents Part Number Index

Hydraulic Lift System, 5042, 5048, 5052 (S/N A1095A-)

(Applies to UT5042, UT5048, UT5052 only)

00466

576-026P - 60 - 12/31/13

Table of Contents Part Number Index

Hydraulic Lift System, 5042, 5048, 5052 (S/N A1095A-)

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg00466

UT5048, UT5052 Kit# 810-144CCYL REP 4.25X8X1.50 TIE 3000#810-481C1.
SEAL KIT MW 4.25 RPHCYL 4A6104810-144C1.

UT5042 Kit# 810-151CCYL REP 4X8X1.38 ROD TIE 3000#810-138C1.
SEAL KIT MW 4 RPH CYL 4A5103810-151C1.

UT5048, UT5052 Kit# 810-151CCYL REP 4X8X1.38 ROD TIE 3000#810-138C2.
SEAL KIT MW 4 RPH CYL 4A5103810-151C2.

UT5042 Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C2.
SEAL KIT MW 3.75X1.375 4A4103810-373C2.

UT5048, UT5052 Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C3.
SEAL KIT MW 3.75X1.375 4A4103810-373C3.

UT5042 Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C3.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C3.

UT5048, UT5052 Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C4.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C4.

UT5042 Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C4.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C4.

UT5048, UT5052 Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C5.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C5.

UT5042 Kit# 810-211CCYL REP 3X8X1.25 ROD TIE 3000#810-477C5.
SEAL KIT MW 3 RPHCYL 4A1104810-211C5.
COUNTERBALANCE VALVE MAN. T.T.810-116C6.
AD 3/4MORB 3/4MJIC811-088C7.
EL 3/4MJIC 3/4MORB811-063C8.
TE 3/4MJIC811-078C9.
HH3/8R2 147 3/4MORB 3/4FJIC811-893C10.

Model 5042HH3/8R2 075 3/4FJIC811-993C11.

Model 5048 & 5052HH3/8R2 087 3/4FJIC841-006C11.

Model 5042HH3/8R2 045 3/4FJIC811-731C12.

Model 5048 & 5052HH3/8R2 059 3/4FJIC841-022C12.

Model 5042HH3/8R2 116 3/4FJIC811-247C13.

Model 5048 & 5052HH3/8R2 131 3/4FJIC841-011C13.

Model 5042 & 5048HH3/8R2 105 3/4FJIC841-003C14.

Model 5052HH3/8R2 133 3/4FJIC841-010C14.

Model 5042HH3/8R2 159 3/4FJIC811-944C15.

Model 5048HH3/8R2 174 3/4FJIC811-237C15.

Model 5052HH3/8R2 201 3/4FJIC811-937C15.

Model 5042HH3/8R2 237 3/4FJIC811-886C16.

Model 5048 & 5052HH3/8R2 278 3/4FJIC811-890C16.
HH3/8R2 024 3/4FJIC811-841C17.
HG HANDLE - BLACK EXT811-826C18.
HG HANDLE - BLACK RET811-913C19.
AD 3/4MORB 3/4FORB (HG)811-919C20.

Includes items 18 thru 20HG PAIR - BLACK MORB-FORB548-001S21.
CP 3/4FORB MALE QD POPPET TYPE811-394C22.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D23.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D23.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 61 - 576-026P

Table of Contents Part Number Index

Hydraulic Lift System, 5042, 5048, 5052 (S/N A1096A+)

(Applies to UT5042, UT5048, UT5052 only)

00466

576-026P - 62 - 12/31/13

Table of Contents Part Number Index

Hydraulic Lift System, 5042, 5048, 5052 (S/N A1096A+)

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg00466

UT5048, UT5052 Kit# 810-158CCYL REP 4.50X8X1.50 TIE 3000#810-557C1.
SEAL KIT MW 4.5 RPHCYL 4A7104810-158C1.

UT5042 Kit# 810-144CCYL REP 4.25X8X1.50 TIE 3000#810-481C1.
SEAL KIT MW 4.25 RPHCYL 4A6104810-144C1.

UT5048, UT5052 Kit# 810-144CCYL REP 4.25X8X1.50 TIE 3000#810-481C2.
SEAL KIT MW 4.25 RPHCYL 4A6104810-144C2.

UT5042 Kit# 810-151CCYL REP 4X8X1.38 ROD TIE 3000#810-138C2.
SEAL KIT MW 4 RPH CYL 4A5103810-151C2.

UT5048, UT5052 Kit# 810-151CCYL REP 4X8X1.38 ROD TIE 3000#810-138C3.
SEAL KIT MW 4 RPH CYL 4A5103810-151C3.

UT5042 Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C3.
SEAL KIT MW 3.75X1.375 4A4103810-373C3.

UT5048, UT5052 Kit# 810-373CCYL REP 3.75X8X1.38 TIE 3000#810-480C4.
SEAL KIT MW 3.75X1.375 4A4103810-373C4.

UT5042 Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C4.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C4.

UT5048, UT5052 Kit# 810-174CCYL REP 3.50X8X1.25 TIE 3000#810-479C5.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C5.

UT5042 Kit# 810-173CCYL REP 3.25X8X1.25 TIE 3000#810-478C5.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C5.
COUNTERBALANCE VALVE MAN. T.T.810-116C6.
AD 3/4MORB 3/4MJIC811-088C7.
EL 3/4MJIC 3/4MORB811-063C8.
TE 3/4MJIC811-078C9.
HH3/8R2 147 3/4MORB 3/4FJIC811-893C10.

Model 5042HH3/8R2 075 3/4FJIC811-993C11.

Model 5048 & 5052HH3/8R2 087 3/4FJIC841-006C11.

Model 5042HH3/8R2 045 3/4FJIC811-731C12.

Model 5048 & 5052HH3/8R2 059 3/4FJIC841-022C12.

Model 5042HH3/8R2 116 3/4FJIC811-247C13.

Model 5048 & 5052HH3/8R2 131 3/4FJIC841-011C13.

Model 5042 & 5048HH3/8R2 105 3/4FJIC841-003C14.

Model 5052HH3/8R2 133 3/4FJIC841-010C14.

Model 5042HH3/8R2 159 3/4FJIC811-944C15.

Model 5048HH3/8R2 174 3/4FJIC811-237C15.

Model 5052HH3/8R2 201 3/4FJIC811-937C15.

Model 5042HH3/8R2 237 3/4FJIC811-886C16.

Model 5048 & 5052HH3/8R2 278 3/4FJIC811-890C16.
HH3/8R2 024 3/4FJIC811-841C17.
HG HANDLE - BLACK EXT811-826C18.
HG HANDLE - BLACK RET811-913C19.
AD 3/4MORB 3/4FORB (HG)811-919C20.

Includes items 18 thru 20HG PAIR - BLACK MORB-FORB548-001S21.
CP 3/4FORB MALE QD POPPET TYPE811-394C22.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D23.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D23.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 63 - 576-026P

Table of Contents Part Number Index

Hydraulic Details Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00532

576-026P - 64 - 12/31/13

Table of Contents Part Number Index

Hydraulic Details Assembly

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00532
PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C1.
WASHER MACH 1.5X1.00X.075804-192C2.
PIN COTTER 3/16 X 2805-058C3.
HOSE HOLDER BRACKET560-002H4.
HHCS 1/2-13X4 1/2 GR5802-413C5.
WASHER LOCK SPRING 1/2 PLT804-015C6.
NUT HEX 1/2-13 PLT803-020C7.
1X7"GRADE8SPECIALTHREAD"575-164D8.
WASHER FLAT 1 USS PLT804-028C9.
NUT HEX 1-8 NYLON INSERT PLT803-038C10.
PART - 180 DEGREE FOLD ROLLER580-186D11.

Rev. 2EYE BOLT 1 1/4 X 9 1/2 LONG802-865C12.

Rev. 1REPL BY 802-865C576-102H12.
NUT HEX JAM 1 1/4-7 PLT803-032C13.

Rev. 2ADJUSTABLE EYE BOLT560-457H14.

Rev. 1REPL BY 560-457H802-796C14.
NUT HEX JAM 1-8 PLT803-030C15.
CYLINDER TRANSPORT LOCK576-059D16.

Rev. 2PIN 3/8 X 3 USABLE LW/PIN805-001C17.

Rev. 1REPLACED BY 805-001C805-152C17.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 65 - 576-026P

Table of Contents Part Number Index

Hydraulic Fold System, 3030 (S/N A1124A-)

(Applies to UT3030 only)

00467

576-026P - 66 - 12/31/13

Table of Contents Part Number Index

Hydraulic Fold System, 3030 (S/N A1124A-)

(Applies to UT3030 only)

Image No.dwg00467

GP Seal Kit # 810-060CCYL 4X24X1.5 TIE 34.63CL 3000#810-487C1.
CYL SEAL KIT-810-031C-5A6104810-060C1.

GP Seal Kit # 810-515CHYD BYPASS/W WT. TRANS REDUCT810-512C2.
SEAL KIT SHOEMAKER # 5457810-515C2.
FILTER INLINE 3/4MORB 3/4MJIC810-532C3.
PRESSURE GAUGE 3000 PSI810-300C4.
RELIEF VALVE 1500 PSI TAMP PRF810-348C5.
AD 3/4MORB 3/4MJIC811-088C6.
EL 3/4MJIC 3/4MORB811-063C7.

AD9/16MORB 3/8FNPT SWIVEL811-802C9.
AD 3/8MNPT 1/4FNPT811-255C10.
TE 3/4MJIC811-078C11.
EL 9/16MORB 3/4MORB811-999C12.
AD 9/16MORB 3/4MJIC811-584C13.
TE 9/16MORB 3/4MJIC 3/4MJIC841-001C14.
HH3/8R2 135 3/4MORB 3/4FJIC811-974C15.
HH3/8R2 087 3/4FJIC841-006C16.
HH3/8R2 010 3/4FJIC841-007C17.
HH3/8R2 043 3/4FJIC841-005C18.
HH3/8R2 030 3/4FJIC811-645C19.
HG HANDLE - GREEN EXT811-915C20.
HG HANDLE - GREEN RET811-916C21.
AD 3/4MORB 3/4FORB (HG)811-919C22.

Includes items 20 thru 22HG PAIR - GREEN MORB-FORB548-003S23.
CP 3/4FORB MALE QD POPPET TYPE811-394C24.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2ORIFICE PLATE 1/16 3/4MORB196-430D8.
Rev. 1RPBY 196-430D811-845C8.

12/31/13 - 67 - 576-026P

Table of Contents Part Number Index

Hydraulic Fold System, 3030 (S/N A1125A+)

(Applies to UT3030 only)

01100

576-026P - 68 - 12/31/13

Table of Contents Part Number Index

Hydraulic Fold System, 3030 (S/N A1125A+)

(Applies to UT3030 only)

Image No.dwg01100

GP Seal Kit # 810-060CCYL 4X24X1.5 TIE 34.63CL 3000#810-487C1.
CYL SEAL KIT-810-031C-5A6104810-060C1.

GP Seal Kit # 810-015CCYL 3X24X1.25 ROD TIE 3000#810-484C2.
CYL SEAL KIT MW (5A4104) 3 X 7810-015C2.

GP Seal Kit # 810-515CHYD BYPASS/W WT. TRANS REDUCT810-512C3.
SEAL KIT SHOEMAKER # 5457810-515C3.
FILTER INLINE 3/4MORB 3/4MJIC810-532C4.
PRESSURE GAUGE 3000 PSI810-300C5.
RELIEF VALVE 1500 PSI TAMP PRF810-348C6.
AD 3/4MORB 3/4MJIC811-088C7.
EL 3/4MJIC 3/4MORB811-063C8.
ORIFICE PLATE 1/16 3/4MORB196-430D9.
AD9/16MORB 3/8FNPT SWIVEL811-802C10.
AD 3/8MNPT 1/4FNPT811-255C11.
TE 3/4MJIC811-078C12.
EL 9/16MORB 3/4MORB811-999C13.
AD 9/16MORB 3/4MJIC811-584C14.
TE 9/16MORB 3/4MJIC 3/4MJIC841-001C15.
CR 3/4MJIC811-147C16.
TE 3/4MJIC 3/4MJIC 3/4FJIC811-073C17.
HH3/8R2 135 3/4MORB 3/4FJIC811-974C18.
HH3/8R2 191 3/4FJIC841-274C19.
HH3/8R2 087 3/4FJIC841-006C20.
HH3/8R2 013 3/4FJIC811-639C21.
HH3/8R2 043 3/4FJIC841-005C22.
HH3/8R2 030 3/4FJIC811-645C23.
HH3/8R2 027 3/4FJIC811-968C24.
HG HANDLE - GREEN EXT811-915C25.
HG HANDLE - GREEN RET811-916C26.
AD 3/4MORB 3/4FORB (HG)811-919C27.

Includes items 25 thru 27HG PAIR - GREEN MORB-FORB548-003S28.
CP 3/4FORB MALE QD POPPET TYPE811-394C29.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 69 - 576-026P

Table of Contents Part Number Index

Hydraulic Fold System, 5036

(Applies to UT5036 only)

00468

576-026P - 70 - 12/31/13

Table of Contents Part Number Index

Hydraulic Fold System, 5036

(Applies to UT5036 only)

Image No.dwg00468

CYL SEAL KIT-810-031C-5A6104810-060C1.

CYL SEAL KIT 4 X 14 MW 5A6102810-013C2.
HYDRAULIC BYPASS VALVE810-432C3.
VALVE PRESS REDUCING W/CHECK810-301C4.
FILTER INLINE 3/4MORB 3/4MJIC810-532C5.
PRESSURE GAUGE 3000 PSI810-300C6.
RELIEF VALVE 1500 PSI TAMP PRF810-348C7.
AD 3/4MORB 3/4MJIC811-088C8.
EL 3/4MJIC 3/4MORB811-063C9.

TE 3/4MORB 3/4MJIC 3/4MJIC811-077C11.
EL 3/4MJIC 9/16MORB811-216C12.
EL 3/8FNPT 9/16MORB811-281C13.
TE 3/4MJIC811-078C14.
EL 9/16MORB 3/4MORB811-999C15.
AD 9/16MORB 3/4MJIC811-584C16.
TE 9/16MORB 3/4MJIC 3/4MJIC841-001C17.
CR 3/4MJIC811-147C18.
AD 3/8MNPT 1/4FNPT811-255C19.
HH3/8R2 084 3/4FJIC 3/4MORB811-236C20.
HH3/8R2 054 3/4FJIC811-848C21.
HH3/8R2 021 3/4FJIC811-643C22.
HH3/8R2 027 3/4FJIC811-968C23.
HH3/8R2 010 3/4FJIC841-007C24.
HH3/8R2 017 3/4FJIC841-008C25.
HH3/8R2 087 3/4FJIC841-006C26.
HH3/8R2 231 3/4FJIC841-009C27.
HH3/8R2 027 3/4FJIC811-968C28.
HH3/8R2 119 3/4FJIC811-936C29.
HH3/8R2 114 3/4FJIC811-934C30.
HH3/8R2 043 3/4FJIC841-005C31.
HH3/8R2 119 3/4FJIC811-936C32.
HH3/8R2 030 3/4FJIC811-645C33.

HH3/8R2 030 3/4FJIC811-645C35.
HH3/8R2 010 3/4FJIC841-007C36.
HG HANDLE - GREEN EXT811-915C37.
HG HANDLE - GREEN RET811-916C38.
AD 3/4MORB 3/4FORB (HG)811-919C39.

CP 3/4FORB MALE QD POPPET TYPE811-394C41.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

GP Seal Kit # 810-060CCYL 4X24X1.5 TIE 34.63CL 3000#810-487C1.

GP Seal Kit # 810-013CCYL 4X16X1.25 TIE 26.63CL 3000810-486C2.

Rev. 2ORIFICE PLATE 1/16 3/4MORB196-430D10.
Rev. 1RPBY 196-430D811-845C10.

Rev. 2HH3/8R2 087 3/4FJIC841-006C34.
Rev. 1Changed to 841-006CHH3/8R2 075 3/4FJIC811-993C34.

Includes items 37 thru 39HG PAIR - GREEN MORB-FORB548-003S40.

12/31/13 - 71 - 576-026P

Table of Contents Part Number Index

Hydraulic Fold System, 5042, 5048 & 5052

(Applies to UT5042, UT5048, UT5052 only)

00577

576-026P - 72 - 12/31/13

Table of Contents Part Number Index

Hydraulic Fold System, 5042, 5048 & 5052

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg00577

GP Seal Kit # 810-060CCYL 4X24X1.5 TIE 34.63CL 3000#810-487C1.
CYL SEAL KIT-810-031C-5A6104810-060C1.

GP Seal Kit # 810-013CCYL 4X16X1.25 TIE 26.63CL 3000810-486C2.
CYL SEAL KIT 4 X 14 MW 5A6102810-013C2.
HYDRAULIC BYPASS VALVE810-432C3.
VALVE PRESS REDUCING W/CHECK810-301C4.
FILTER INLINE 3/4MORB 3/4MJIC810-532C5.
PRESSURE GAUGE 3000 PSI810-300C6.
RELIEF VALVE 1500 PSI TAMP PRF810-348C7.
AD 3/4MORB 3/4MJIC811-088C8.
EL 3/4MJIC 3/4MORB811-063C9.

TE 3/4MORB 3/4MJIC 3/4MJIC811-077C11.
EL 3/4MJIC 9/16MORB811-216C12.
EL 3/8FNPT 9/16MORB811-281C13.
TE 3/4MJIC811-078C14.
EL 9/16MORB 3/4MORB811-999C15.
AD 9/16MORB 3/4MJIC811-584C16.
TE 9/16MORB 3/4MJIC 3/4MJIC841-001C17.
CR 3/4MJIC811-147C18.
AD 3/8MNPT 1/4FNPT811-255C19.
HH3/8R2 084 3/4FJIC 3/4MORB811-236C20.

Model 5042HH3/8R2 054 3/4FJIC811-848C21.

Model 5048 & 5052HH3/8R2 062 3/4FJIC811-670C21.
HH3/8R2 021 3/4FJIC811-643C22.
HH3/8R2 027 3/4FJIC811-968C23.
HH3/8R2 010 3/4FJIC841-007C24.
HH3/8R2 017 3/4FJIC841-008C25.
HH3/8R2 087 3/4FJIC841-006C26.

Model 5042HH3/8R2 231 3/4FJIC841-009C27.

Model 5048 & 5052HH3/8R2 237 3/4FJIC811-886C27.

Model 5042HH3/8R2 027 3/4FJIC811-968C28.

Model 5048 & 5052HH3/8R2 042 3/4FJIC811-838C28.

Model 5042HH3/8R2 133 3/4FJIC841-010C29.

Model 5048 & 5052HH3/8R2 147 3/4FJIC811-549C29.

Model 5042HH3/8R2 126 3/4FJIC811-851C30.

Model 5048 & 5052HH3/8R2 140 3/4FJIC811-126C30.

Model 5042HH3/8R2 043 3/4FJIC841-005C31.

Model 5048 & 5052HH3/8R2 057 3/4FJIC811-952C31.

Model 5042HH3/8R2 131 3/4FJIC841-011C32.

Model 5048 & 5052HH3/8R2 165 3/4FJIC841-015C32.
HH3/8R2 030 3/4FJIC811-645C33.

Model 5042HH3/8R2 093 3/4FJIC811-978C34.

Model 5048 & 5052HH3/8R2 106 3/4FJIC841-012C34.
HH3/8R2 030 3/4FJIC811-645C35.

Model 5042HH3/8R2 010 3/4FJIC841-007C36.

Model 5048 & 5052HH3/8R2 024 3/4FJIC811-841C36.
HH3/8R2 150 3/4FJIC811-941C37.
HH3/8R2 150 3/4FJIC811-941C38.

Model 5042HH3/8R2 108 3/4FJIC 3/4FJIC811-687C39.

Model 5048 & 5052HH3/8R2 123 3/4FJIC811-897C39.
HH3/8R2 019 3/4FJIC 3/4FJIC811-688C40.
HG HANDLE - GREEN EXT811-915C41.
HG HANDLE - GREEN RET811-916C42.
AD 3/4MORB 3/4FORB (HG)811-919C43.

Includes items 39 thru 41HG PAIR - GREEN MORB-FORB548-003S44.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2ORIFICE PLATE 1/16 3/4MORB196-430D10.
Rev. 1RPBY 196-430D811-845C10.

12/31/13 - 73 - 576-026P

Table of Contents Part Number Index

Hydraulic Fold System, 5042, 5048 & 5052 (continued)

(Applies to UT5042, UT5048, UT5052 only)

CP 3/4FORB MALE QD POPPET TYPE811-394C45.
TE 3/4MJIC 3/4MJIC 3/4FJIC811-073C46.

RevisionCommentsPart DescriptionPart No.Ref.

576-026P - 74 - 12/31/13

Table of Contents Part Number Index

Hydraulic Fold System, 5042, 5048 & 5052 (continued)

(Applies to UT5042, UT5048, UT5052 only)

This Page Intentionally Left Blank

Section 4: Hydraulics

12/31/13 - 75 - 576-026P

Table of Contents Part Number Index

Hydraulic Gang Layout

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00469

576-026P - 76 - 12/31/13

Table of Contents Part Number Index

Hydraulic Gang Layout

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00469

GP Seal Kit # 810-174CCYL REP 3.50x8x1.25 rod810-479C1.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C1.

GP Seal Kit # 810-173CCYL REP 3.25x8x1.25 rod810-478C2.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C2.

GP Seal Kit # 810-211CCYL REP 3x8x1.25 rod810-477C3.
SEAL KIT MW 3 RPHCYL 4A1104810-211C3.
PILOT CHECK VALVEPW01574.
EL 3/4MJIC 3/4MORB811-063C5.
TE 1/2FNPT 3/4MJIC 3/4MJIC841-045C6.
EL 1/2MNPT 3/4MJIC811-159C7.
AD 1/4MNPT 3/4MJIC841-046C8.
CR 3/4MJIC811-147C9.

Model 3030, 5036 & 5042HH3/8R2 164 3/4MORB 3/4FJIC841-166C10.

Model 5048 & 5052HH3/8R2 192 3/4MORB 3/4FJIC841-047C10.

Model 3030D,5036D, 5042DHH3/8R2 039 3/4FJIC811-939C11.

Model 5048D & 5052DHH3/8R2 024 3/4FJIC811-841C11.

Model 3030C, 5036C, 5042CHH3/8R2 033 3/4FJIC811-943C11.

Model 5048C & 5052CHH3/8R2 042 3/4FJIC811-838C11.

Model 3030, 5042HH3/8R2 121 3/4FJIC811-905C12.

Model 5036DHH3/8R2 067 3/4FJIC841-025C12.

Model 5036CHH3/8R2 089 3/4FJIC811-988C12.

Model 5048DHH3/8R2 138 3/4FJIC811-894C12.

Model 5048CHH3/8R2 105 3/4FJIC841-003C12.

Model 5052DHH3/8R2 138 3/4FJIC811-894C12.

Model 5052CHH3/8R2 105 3/4FJIC841-003C12.

Model 5036DHH3/8R2 111 3/4FJIC811-127C13.

Model 5036CHH3/8R2 093 3/4FJIC811-978C13.

Model 5042D,5042CHH3/8R2 111 3/4FJIC811-127C13.

Model 5048DHH3/8R2 144 3/4FJIC811-550C13.

Model 5048CHH3/8R2 131 3/4FJIC841-011C13.

Model 5052DHH3/8R2 116 3/4FJIC811-247C13.

Model 5052CHH3/8R2 105 3/4FJIC841-003C13.

Model 3030DHH3/8R2 144 3/4FJIC811-550C14.

Model 3030CHH3/8R2 154 3/4FJIC811-651C14.

Model 5036DHH3/8R2 198 3/4FJIC811-310C14.

Model 5036CHH3/8R2 198 3/4FJIC811-310C14.

Model 5042D,5042CHH3/8R2 252 3/4FJIC811-887C14.

Model 5048DHH3/8R2 268 3/4FJIC811-662C14.

Model 5048CHH3/8R2 278 3/4FJIC811-890C14.

Model 5052DHH3/8R2 243 3/4FJIC811-996C14.

Model 5052CHH3/8R2 252 3/4FJIC811-887C14.
HH3/8R2 021 3/4FJIC811-643C15.
HG HANDLE - RED EXT811-914C16.
HG HANDLE - RED RET811-827C17.
AD 3/4MORB 3/4FORB (HG)811-919C18.

Includes items 11 thru 13811-914C- RED MORB-FORB548-002S19.
CP 3/4FORB MALE QD POPPET TYPE811-394C20.
HOSE WRAP,LARGE SIZE,SHORT(8")575-268D21.
HOSE WRAP,SMALL SIZE,SHORT(8")550-123D21.
HOSE WRAP,LARGE SIZE,LONG(15")550-346D21.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 77 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-138C 4X8X1.38 Rod)

(Applies to UT5036, UT5042, UT5048, UT5052 only)

41918

576-026P - 78 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-138C 4X8X1.38 Rod)

(Applies to UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg41918
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MW ROD 1 3/8 DIA2M6816NC2.

MW PISTON4R51094.
MIDWAYTUBE5R51165.
MIDWAYADI BASE6R5164-ADI6.
MW TIE ROD 4 X 10 CYLINDER7M63167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1-142A002416.
MW TIE ROD NUT2A001817.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 4 RPH CYL 4A5103810-151C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)MW HEAD3R58403.
Rev. 1(S/N A1180A-)MW HEAD3R58123.

12/31/13 - 79 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-477C 3X8X1.25 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

41918

576-026P - 80 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-477C 3X8X1.25 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg41918
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MW ROD 1-1/4 DIA X 8 STROKE2M4416NC2.

MIDWAYPISTON4R11094.
MIDWAYTUBE5R11165.
MIDWAYADI BASE6R1164-ADI6.
MW TIE ROD 3 X 8 CYLINDER7M43167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1-142A002416.
MW TIE ROD NUT2A001417.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 3 RPHCYL 4A1104810-211C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)MW HEAD3R14403.
Rev. 1(S/N A1180A-)MW HEAD 3X1-1/4 ROD PT.E3R14123.

12/31/13 - 81 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-478C 3.25X8X1.25 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

41918

576-026P - 82 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-478C 3.25X8X1.25 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg41918
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MW ROD 1 1/4 DIA2M5416NC2.

PISTON MIDWAY4R21094.
TUBE MIDWAY5R21165.
MIDWAYADI BASE6R2164-ADI6.
MW TIE ROD7M53167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1-142A002416.
MW TIE ROD NUT2A001617.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 3.25 RPHCYL 4A2104810-173C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)MW HEAD3R24403.
Rev. 1(S/N A1180A-)MW HEAD3R24123.

12/31/13 - 83 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-479C 3.25X8X1.25 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

41918

576-026P - 84 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-479C 3.25X8X1.25 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg41918
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MW ROD 1 1/4 DIA2M5416NC2.

PISTON MIDWAY4R31094.
TUBE MIDWAY5R31165.
MIDWAYADI BASE6R3164-ADI6.
MW TIE ROD7M53167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1-142A002416.
MW TIE ROD NUT2A001617.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 3.5 RPHCYL 4A3104810-174C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)MW HEAD3R4403.
Rev. 1(S/N A1180A-)MW HEAD3R34123.

12/31/13 - 85 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-480C 3.75X8X1.38 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

41918

576-026P - 86 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-480C 3.75X8X1.38 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg41918
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MW ROD2M6816NC2.

PISTON MIDWAY4R41094.
MIDWAYTUBE5R41165.
MIDWAYADI BASE6R4164-ADI6.
MW TIE ROD7M73167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1-142A002416.
MW TIE ROD NUT2A001817.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 3.75X1.375 4A4103810-373C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)MW HEAD3R48403.
Rev. 1(S/N A1180A-)MW HEAD3R48123.

12/31/13 - 87 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-481C 4.25X8X1.50 Rod)

(Applies to UT5042, UT5048, UT5052 only)

41918

576-026P - 88 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-481C 4.25X8X1.50 Rod)

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg41918
MW ROD CLEVIS 1.00PN 1.5-12THD1M7021-ADI1.
MW ROD2S7516NC2.

PISTON MIDWAY4R61094.
MW TUBE5R51165.
MIDWAYADI BASE6R6164-ADI6.
MW TIE ROD7M73167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1-142A002416.
NUT HEX 3/4-16 PLAIN803-257C17.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 4.25 RPHCYL 4A6104810-144C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)HEAD MIDWAY3R69403.
Rev. 1(S/N A1180A-)HEAD MIDWAY3R69123.

12/31/13 - 89 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-484C 3X24X1.25 Rod)

(Applies to UT3030, UT5036 only)

41913

576-026P - 90 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-484C 3X24X1.25 Rod)

(Applies to UT3030, UT5036 only)

Image No.dwg41913
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MIDWAYROD2M4432NC2.
MW HEAD 3X1-1/4 ROD PT.E3R14123.
MW PISTON4M41084.
MW TUBE5M41325.
MIDWAYADI BASE6R1162-ADI6.
MW STD TIE ROD7M43327.

Only in item 18MW WIPER8.

Only in item 18U-CUP9.

Only in item 18O-RING MIDWAY10.

Only in item 18BACK UP MIDWAY11.

Only in item 18CROWN SEAL MIDWAY12.

Only in item 18MW PISTON NUT SEAL13.
MW PISTON NUT 1-142A002414.
MW TIE ROD NUT2A001415.
NUT HEX 3/8-16 PLAIN803-234C16.
HHCS 3/8-16X1 3/4 GR5802-023C17.
CYL SEAL KIT MW (5A4104) 3 X 7810-015C18.
PIN CLVS 1.0X3.13 USBL805-396C19.
PIN COTTER 3/16 X 2805-058C20.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 91 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-486C 4X16X1.25 Rod)

(Applies to UT5042, UT5048, UT5052 only)

41913

576-026P - 92 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-486C 4X16X1.25 Rod)

(Applies to UT5042, UT5048, UT5052 only)

Image No.dwg41913
MIDWAYHARDENED CLEVIS ADI1M7016-ADI1.
MW ROD 1 1/4 DIA2M6482NC2.
MW HEAD3R57123.
MW PISTON4M61084.
MW TUBE 4 X 16 CYLINDER5M61245.
MIDWAYADI BASE6R5162-ADI6.
MW TIE ROD 4 X 16 CYLINDER7M63247.

Only in item 18MW WIPER8.

Only in item 18U-CUP9.

Only in item 18O-RING MIDWAY10.

Only in item 18BACK UP MIDWAY11.

Only in item 18CROWN SEAL MIDWAY12.

Only in item 18MW PISTON NUT SEAL13.
MW PISTON NUT 1-142A002414.
MW TIE ROD NUT2A001815.
NUT HEX 3/8-16 PLAIN803-234C16.
HHCS 3/8-16X1 3/4 GR5802-023C17.
CYL SEAL KIT 4 X 14 MW 5A6102810-013C18.
PIN CLVS 1.0X3.13 USBL805-396C19.
PIN COTTER 3/16 X 2805-058C20.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 93 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-487C 4X24X1.5 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

41913

576-026P - 94 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-487C 4X24X1.5 Rod)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg41913
MW ROD CLEVIS 1.00PN 1.5-12THD1M7021-ADI1.
MIDWAYROD2S6570NC2.
HEAD MIDWAY3R54123.
MW PISTON4M61084.
MW TUBE 4 X 24 CYLINDER5M61325.
MIDWAYADI BASE6R5162-ADI6.
MW TIE ROD 4 X 24 CYLINDER7M63327.

Only in item 18MW WIPER8.

Only in item 18U-CUP9.

Only in item 18O-RING MIDWAY10.

Only in item 18BACK UP MIDWAY11.

Only in item 18CROWN SEAL MIDWAY12.

Only in item 18MW PISTON NUT SEAL13.
MW PISTON NUT 1-142A002414.
MW TIE ROD NUT2A001815.
NUT HEX 3/8-16 PLAIN803-234C16.
HHCS 3/8-16X1 3/4 GR5802-023C17.
CYL SEAL KIT-810-031C-5A6104810-060C18.
PIN CLVS 1.0X3.13 USBL805-396C19.
PIN COTTER 3/16 X 2805-058C20.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

12/31/13 - 95 - 576-026P

Table of Contents Part Number Index

Hydraulic Cylinder (810-557C 4.50X8X1.50 Rod)

(Applies to UT5048, UT5052 only)

41918

576-026P - 96 - 12/31/13

Table of Contents Part Number Index

Hydraulic Cylinder (810-557C 4.50X8X1.50 Rod)

(Applies to UT5048, UT5052 only)

Image No.dwg41918
MW ROD CLEVIS 1.00PN 1.5-12THD1M7021-ADI1.
MW ROD2S7574NC2.

PISTON MIDWAY4R71134.
TUBE MIDWAY5R71165.
MIDWAYADI BASE6R7184-ADI6.
MW TIE ROD7M73167.

Only in item 20MW WIPER SEAL8.

Only in item 20U-CUP9.

Only in item 20O-RING MIDWAY10.

Only in item 20BACK UP MIDWAY11.

Only in item 20TEFLON SEAL12.

Only in item 20LOADER13.

Only in item 20WEAR RING14.

Only in item 20O-RING15.
MW PISTON NUT 1 1/4"-12 UNF2A002516.
NUT HEX 3/4-16 PLAIN803-257C17.
NUT HEX 3/8-16 PLAIN803-234C18.
HHCS 3/8-16X1 3/4 GR5802-023C19.
SEAL KIT MW 4.5 RPHCYL 4A7104810-158C20.
PIN CLVS 1.0X3.13 USBL805-396C21.
PIN COTTER 3/16 X 2805-058C22.

Section 4: Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2(S/N A1181A+)HEAD MIDWAY3R75403.
Rev. 1(S/N A1180A-)HEAD MIDWAY3R75123.

12/31/13 - 97 - 576-026P

Table of Contents Part Number Index

Disc Gang Assembly (S/N GP-A1202A-)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

00533

576-026P - 98 - 12/31/13

Table of Contents Part Number Index

Disc Gang Assembly (S/N GP-A1202A-)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

Image No.dwg00533
Gang Frame,5-Blade577-013H1.
Gang Frame,6-Blade577-014H1.
Gang Frame,7-Blade577-015H1.
Gang Frame,8-Blade577-016H1.
Gang Frame,9-Blade577-017H1.
BEARING HANGER (UT)577-011H2.
GANG BOLT-5 BLADE 1.5X36.75577-020D3.
GANG BOLT-6 BLADE 1.5X44.75577-021D3.
GANG BOLT-7 BLADE 1.5X52.75577-022D3.
GANG BOLT-8 BLADE 1.5X60.75577-023D3.
GANG BOLT-9 BLADE 1.5X68.75577-024D3.
SHALLOW C-CAVITY CONVEX WASHER551-032D4.
20" DISC BLADE SHALLOW CONCAVFC15675.
18" DISC BLADE SHALLOW CONCAV820-274C6.
4-1/16" HALF SPOOL551-039H7.
BRG FLG 1.50ID 4BOLT SQ822-208C8.
2" HALF SPOOL551-040H9.
SPOOL551-041H10.
WASHER 7X1.562 DURA-TITE820-276C11.
WASHER MACH 2.25 X 1.50 X 10GA804-063C12.
NUT HEX SLOTTED 1 1/2-6 PLT803-301C13.

U-BOLT 5/8-11X3 1/32X4 1/2 SPT806-183C15.
WASHER LOCK SPRING 5/8 PLT804-022C16.
NUT HEX 5/8-11 PLT803-021C17.
U-BOLT 1/2-13 1 17/32 X 2 3/4806-103C18.
WASHER LOCK SPRING 1/2 PLT804-015C19.
NUT HEX 1/2-13 PLT803-020C20.
SPRING LOADED SCRAPER ASSY RH551-035S21.
SPRING LOADED SCRAPER ASSY LH551-043S21.
RIGID SCRAPER RIGHT HAND551-037H22.
RIGID SCRAPER LEFT HAND551-044H22.
HHCS 3/8-16X2 1/2 GR5802-114C23.
NUT LOCK 3/8-16 NYLON INSERT803-078C24.
U-BOLT 3/8-16X1 17/32X2 1/2806-191C25.
RHSNB 1/2-13X1 3/4 GR5802-331C26.
SCRAPER BRACKET, DISC551-036H27.
SCRAPER BLADE RIGHT HAND551-029D28.
SCRAPER BLADE LEFT HAND551-037D28.
WASHER FLAT 1/2 USS PLT804-017C29.
SPRING, SCRAPERFC067630.
NUT LOCK 1/2-13 PLT803-019C31.
WASHER FLAT 1/4 SAE PLT804-007C32.
NUT HEX NYLOCK 1/4-20803-255C33.

Section 5: Gangs

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2HHCS 1/4-20X2 3/4 GR8 PLT802-804C14.
Rev. 1Changed to 802-804CPIN SPIROL 1/4X2 1/2 HEAVY PLN805-358C14.

12/31/13 - 99 - 576-026P

Table of Contents Part Number Index

Disc Gang Assembly (S/N GP-A1203A+)

(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)

43275

576-026P - 100 - 12/31/13