Page 1
Table of Contents Parts Number Index
Parts Manual
Manufacturing, Inc.
LS10 and LS12
Levee Seeder
Read the operator’s manual entirely.Whenyouseethissymbol, the subsequent
instructions and warnings are serious - follow without exception. Your life and
!
the lives of others depend on it!
18173
3)GREAT PLAINS/3-POINT DRILLS/LEVEE SEEDERS
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2000 Printed 3/10/2004
117-055P
Rev. A
Page 2
Section 1 Introduction
Table of Contents
Table of Contents
Table of Contents Parts Number Index
Section 1 Introduction . . . . . . . . . . . . . . . . . . . . . 1-1
General Information . . . . . . . . . . . . . . . . . . . . . 1-1
Using This Manual . . . . . . . . . . . . . . . . . . . . . . 1-1
Manual Replacement Information . . . . . . . . . . 1-1
Manual Revisions . . . . . . . . . . . . . . . . . . . . . . 1-1
Touch-up Paint . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Hardware Legend . . . . . . . . . . . . . . . . . . . . . . 1-2
Replacement Hardware . . . . . . . . . . . . . . . . . . 1-2
Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Part Number Service Coding . . . . . . . . . . . . . . 1-2
Part Number Index . . . . . . . . . . . . . . . . . . . . . . 1-3
Section 2 Box and Frame . . . . . . . . . . . . . . . . . . . 2-1
Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . 2-1
Box Assembly 12 Foot (10 Foot S/N TT1139-) 2-3
Box Assembly 10 Foot (S/N TT1140+) . . . . . . 2-5
Seed Level Indicator . . . . . . . . . . . . . . . . . . . . 2-7
Lights (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Section 3 Metering System . . . . . . . . . . . . . . . . . 3-1
Feeder Cup Channel . . . . . . . . . . . . . . . . . . . . 3-1
Section 4 Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Hydraulic Drive . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Drive Hydraulics . . . . . . . . . . . . . . . . . . . . . . . 4-3
Section 5 Decals . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Decal Placement . . . . . . . . . . . . . . . . . . . . . . . 5-1
© Copyright 2000Allrights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressedor implied. While every precaution has been taken in the
preparationofthismanual,GreatPlainsManufacturing, Inc. assumesnoresponsibility for errorsoromissions. Neither is anyliability assumed fordamages resulting from
theuseoftheinformationcontained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improveits products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
Great Plains Manufacturing, Incorporated T rademarks
Printed in the United States of America.
117-055P
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
117-055P
4/8/2002
Page 3
Table of Contents Parts Number Index
Alphabetical P age Index
B
Box Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
D
Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
Drive Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
F
Feeder Cup Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
H
Hydraulic Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
L
Lights (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
S
Seed Level Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
4/8/2002
117-055P
117-055P
Page 4
Section 1 Introduction
Table of Contents Parts Number Index
1-1
LS10 and LS12 Levee Seeder
LS10 and LS12 Levee Seeder
General Inf ormation
Using This Manual
This manual is divided into sections. The first section contains General Information, a Table of Contents, an
Alphabetical Page Index, and a Part Number Index. The
remaining sections divide the machine into segments (i.e.
Frames, Drives, Hydraulics, etc.) which illustrate and list
all parts.
The Great Plains parts in this manual are specially designedfor this machineand should bereplaced with Great
Plains parts only.
Theinformation in this manual is current at printing. Some
parts may change to assure top performance.
Right-handand left-hand as used in this manual are determined by facing the direction the machine will travel while
in use.
Below is an example of two facing pages from a parts
manual. Familiarize yourself with the contents of these
pages.
Manual Replacement Information
Replacement manuals are available. Refer to your dealer
or the Great Plains Publications Catalog for additional
information.
Manual Revisions
Whenthis manual is revised, the modification date is printed on the front cover and on the revised page(s).
Touch-up Paint
Repaint parts where paint is worn or scratched to prevent
rust. Aerosol touch-up paint is available. To order use
Great Plains parts numbers below:
GP Green . . . . . . . . . . . . . . . . 821-001C
GP Black . . . . . . . . . . . . . . . . 821-002C
GP Beige . . . . . . . . . . . . . . . . 821-003C
GP Buckskin. . . . . . . . . . . . . . 821-004C
Page
Number
Illustration
Heading
Illustration
Illustration
Number
Manual
Name
2-1 CF500 and CF600
Tongue & Pull Bar (S/N 00000-)
10207
175-083P
Number Break
Serial
Illustration
Page
7/1/99
Parts
Page
Tongue & Pull Bar (S/N 00000-)
1. 177-001H 13' END WHEEL TONGUE WELDMENT
2. 177-004H PULL BAR WELDMENT LH
2 177-005H PULL BAR WELDMENT RH
3. 806-032C U-BOLT 5/8-11 X 3 17/32 UNEVEN
4. 804-022C WASHER LOCK SPRING 5/8 PLT
5. 803-021C NUT HEX 5/8-11 PLT
6. 802-183C RHSNB 1/2-13X1 GR5
7. 802-083C HFSS 1/2-13X1 1/4 GR8
8. 804-015C WASHER LOCK SPRING 1/2 PLT
9. 803-020C NUT HEX 1/2-13 PLT
10. 177-587D SAFETY CHAIN WASHER
11. 807-023C SPRING HOSE LOOP
12. 801-026C SCREW HEX 3/8-16X1 TYPE F
13. 804-013C WASHER LOCK SPRING 3/8 PLT
14. 804-012C WASHER FLAT 3/8 SAE PLT
15. 177-009D CLEVIS HITCH TOP HALF
16. 177-008D CLEVIS HITCH BOTTOM HALF
17. 802-177C RHSNB 3/4-10X2 1/2 GR5
18. 804-023C WASHER LOCK SPRING 3/4 PLT
19. 803-027C NUT HEX 3/4-10 PLT
20. 803-037C NUT HEX WHIZ 1/2-13 PLT
21. 806-028C U-BOLT 1/2-13 X 3 17/32 X4 3/4
22. 890-118C SCREW JACK 2000#
23. 802-299C RHSNB 3/4-10X3 GR5
24. 890-182C SAFETY CHAIN 10000 LB
Section
Name
Frames
175-083P7/1/98
Section
2-2
Number
2
Parts List
117-055P
117-055P
Manual
Number
New or Modification
Date
5/15/2000
Page 5
Table of Contents Parts Number Index
Hardware Legend
AR As Required
BLADE Blade Bolt
C Cap Screw
CP Cotter Pin
CPHSSS Cup Point Hex Socket Set Screw
CPSHSS Cup Point Square Head Set Screw
CPSQHSS Cup Point Square Head Set Screw
CRFCHMS Cross Recess Flat Countersunk Head Mach. Screw
CRPHMS Cross Recess Pan Head Machine Screw
CRPHTFS Cross Recess Pan Head Thread Forming
CRRHMS Cross Recess Round Head Machine Screw
CRTHMS Cross Recess Truss Head Machine Screw
CSNB Countersunk Square Neck Bolt
FHMS Flat Head Machine Screw
FTC Full Thread Cap Screw
H Hex Nut
HCLN Hex Center Lock Nut
HFLCS Hex Flange Lock Cap Screw
HFS Hex Flange Screw
HFSLN Hex Flange Serrated Lock Nut
HFSS Hex Flange Serrated Screw
HHCS Hex Head Cap Screw or Metric Bolt
HSBHCS Hex Socket Button Head Cap Screw
HSFCHCS Hex Socket Flat Countersunk Head Cap Screw
HSHCS Hex Socket Head Cap Screw
HSSS Hex Socket Head Screw
HTLN Hex Top Lock Nut
HWHCS Hex Washer Head Cap Screw
Introduction
HWHMS Hex Washer Head Machine Screw
HXBHCS Hex Socket Button Head Cap Screw
J Hex Jam Nut
JIC 37 Degree Tapered Thread
L Helical Spring Lock Washer
LUG Lug Bolt
NFC National Fine Cap Screw
NPSM National Pipe Straight Mechanical
NPTF National Pipe Taper Fuel
P Wide Plain Washer
PHMS Pan Head Machine Screw
PLOW Plow Bolt
RHMS Round Head Machine Screw
RHSNB Round Head Square Neck Bolt
SCREW LEVELING
SCREW THUMB
SCREW WELD Weld Screw
SFCHMS Slotted Flat Countersunk Head Machine Screw
SFHMS Slotted Fillister Head Machine Screw
SP Special
SP SCREW Special Screw
SQHSS Square Head Set Screw
SRHMS Slotted Round Head Machine Screw
SSS Socket Set Screw
STCS Self Tapping Cap Screw
STHMS Slotted Truss Head Machine Screw
WHEEL Wheel Studs and Hub Long Bolts
WING Wing Bolt
Leveling Screw
Thumb Screw
1-2
1
Replacement Hardware
The Hardware Legend above lists hardware abbreviations used in the parts lists. All bolts and nuts are grade 5
unless otherwise noted. The use of improper grades of
hardware can result in personal injury, damage to equipment, or loss of property.
Serial Numbers
Always use the serial and model number when ordering
parts. Refer to the operator’s manual for serial number
plate location.
(S/N 20001+ or Includes serial numbers 20001
S/N 20001 and above) and above (to the latest
number)
(S/N 10001↔20000) Includes serial numbers between
10000 and 20001
(S/N 10000- or Includes serial numbers 10000
S/N 10000 and below) and below (to the earliest
number)
Not interchangeable with revision 1
Item number
1. ⊗ ➀➌ 310-179A BLADE SPINDLE W/KEY 1/4SQ X7/8
Revision 2
Revision 3
➋ 310-299D BLD SPNDL SHFT (RPBY 310-179A)
➊
●
310-409D BLD SPNDL SHFT (RPBY 310-179A)
Part Number Service Coding
Within the parts lists some part numbers are coded for revisions and interchangeability.
Bold face type indicates parts that have been revised.
Theseparts are considered interchangeable unless otherwise noted.
Service Code Legend:
➊
First revision, e.g.; ➋ is 2nd revision, ➌ is 3rd
revision, etc.
(Greater numbers are the newest.)
● Use existing stock of this part before ordering
the revision.
⊗ Not interchangeable
⊗➀➋ Revision 2 is not interchangeable w/1
The sample below shows how these codes are used.
Part NumberPart Number
Description
5/15/2000
Use up existing stock
Revision 1
117-055P
Page 6
Table of Contents Parts Number Index
1-3
LS10 and LS12 Levee Seeder
LS10 and LS12 Levee Seeder
Part Number Index
Part Number aaaaaaaaaPage Part Number aaaaaaaaaPagePart Number aaaaaaaaaPagePart Number aaaaaaaaaPage
117-051H . . . . . . . . 2-2
117-052H . . . . . . . . 2-2
117-053H . . . . . . . . 2-2
117-054H . . . . . . . . 4-2
117-061H . . . . . . . . 2-2
117-070H . . . . . . . . 2-2
117-285D . . . . . . . . 4-2
117-296D . . . . . . . . 2-2
117-297D . . . . . . . . 2-2
117-298D . . . . . . . . 2-2
117-299D . . . . . . . . 2-2
117-300D . . . . . . . . 2-2
117-301D . . . . . . . . 2-2
117-302D . . . . . . . . 4-2
118-052H . . . . . . . . 2-4
118-336D . . . . . . . . 3-2
118-341D . . . . . . . . 3-2
118-402D . . . . . . . . 2-4
118-402D . . . . . . . . 2-6
118-403D . . . . . . . . 2-4
118-403D . . . . . . . . 2-6
118-413H . . . . . . . . 2-4
118-415H . . . . . . . . 2-4
118-432D . . . . . . . . 3-2
118-474H . . . . . . . . 2-8
118-486D . . . . . . . . 2-4
118-487D . . . . . . . . 2-4
118-526D . . . . . . . . 3-2
118-527D . . . . . . . . 3-2
118-528D . . . . . . . . 3-2
118-529D . . . . . . . . 3-2
118-530D . . . . . . . . 3-2
118-575D . . . . . . . . 3-2
118-606D . . . . . . . . 3-2
118-725S . . . . . . . . 3-2
118-828H . . . . . . . . 2-6
119-153D . . . . . . . . 2-4
119-153D . . . . . . . . 2-6
119-154D . . . . . . . . 2-4
119-154D . . . . . . . . 2-6
119-190D . . . . . . . . 2-4
119-190D . . . . . . . . 2-6
119-229H . . . . . . . . 2-4
119-231H . . . . . . . . 2-4
119-237D . . . . . . . . 2-2
119-270H . . . . . . . . 2-2
119-295H . . . . . . . . 2-6
123-520D . . . . . . . . 2-4
136-096D . . . . . . . . 4-2
150-138D . . . . . . . 2-10
197-089D . . . . . . . . 2-8
197-091D . . . . . . . . 2-8
197-096D . . . . . . . . 2-8
313-076S . . . . . . . . 2-4
313-076S . . . . . . . . 2-6
313-176D . . . . . . . . 2-4
313-176D . . . . . . . . 2-6
313-186D . . . . . . . . 2-4
313-186D . . . . . . . . 2-6
800-004C . . . . . . . . 3-2
800-101C . . . . . . . . 2-8
800-107C . . . . . . . . 3-2
800-112C . . . . . . . 2-10
800-148C . . . . . . . 2-10
801-035C . . . . . . . . 3-2
801-057C . . . . . . . . 3-2
801-096C . . . . . . . . 2-8
801-151C . . . . . . . 2-10
801-154C . . . . . . . . 2-8
802-004C . . . . . . . . 3-2
802-014C . . . . . . . . 3-2
802-017C . . . . . . . . 2-4
802-017C . . . . . . . . 2-6
802-017C . . . . . . . . 4-2
802-034C . . . . . . . . 2-2
802-079C . . . . . . . . 2-4
802-092C . . . . . . . . 2-4
802-092C . . . . . . . . 2-6
802-097C . . . . . . . . 4-2
802-159C . . . . . . . . 2-2
802-196C . . . . . . . . 3-2
802-203C . . . . . . . 2-10
802-203C . . . . . . . . 2-4
802-203C . . . . . . . . 2-6
802-226C . . . . . . . . 2-2
802-282C . . . . . . . . 4-2
802-387C . . . . . . . . 2-4
802-387C . . . . . . . . 2-6
802-390C . . . . . . . . 2-2
802-411C . . . . . . . . 2-4
802-411C . . . . . . . . 2-6
802-425C . . . . . . . . 2-4
802-425C . . . . . . . . 2-6
802-569C . . . . . . . . 2-4
802-672C . . . . . . . . 4-2
803-001C . . . . . . . . 2-8
803-006C . . . . . . . . 4-2
803-008C . . . . . . . . 2-2
803-008C . . . . . . . . 2-6
803-008C . . . . . . . . 4-2
803-011C . . . . . . . . 2-2
803-011C . . . . . . . . 2-4
803-011C . . . . . . . . 2-6
803-014C . . . . . . . . 4-2
803-020C . . . . . . . . 2-2
803-020C . . . . . . . . 4-2
803-021C . . . . . . . . 2-2
803-036C . . . . . . . . 4-2
803-088C . . . . . . . . 3-2
803-169C . . . . . . . . 2-4
803-169C . . . . . . . . 2-6
803-194C . . . . . . . . 3-2
803-199C . . . . . . . . 2-4
803-199C . . . . . . . . 2-6
803-209C . . . . . . . . 2-4
803-209C . . . . . . . . 2-6
803-255C . . . . . . . . 2-8
804-004C . . . . . . . . 2-8
804-006C . . . . . . . . 4-2
804-009C . . . . . . . . 2-2
804-009C . . . . . . . . 4-2
804-011C . . . . . . . . 2-4
804-011C . . . . . . . . 2-6
804-013C . . . . . . . . 2-4
804-013C . . . . . . . . 3-2
804-013C . . . . . . . . 4-2
804-015C . . . . . . . . 2-2
804-015C . . . . . . . . 4-2
804-016C . . . . . . . . 2-2
804-016C . . . . . . . . 4-2
804-022C . . . . . . . . 2-2
804-036C . . . . . . . . 2-2
804-036C . . . . . . . . 2-4
804-036C . . . . . . . . 2-6
804-036C . . . . . . . . 4-2
804-075C . . . . . . . . 2-8
805-067C . . . . . . . . . 2-8
805-232C . . . . . . . . . 2-2
806-021C . . . . . . . . . 4-2
806-110C . . . . . . . . . 2-2
807-106C . . . . . . . . . 2-4
807-106C . . . . . . . . . 2-6
808-024C . . . . . . . . . 4-2
808-269C . . . . . . . . . 3-2
810-407C . . . . . . . . . 4-2
811-078C . . . . . . . . . 4-4
811-502C . . . . . . . . . 4-4
811-758C . . . . . . . . . 4-4
811-759C . . . . . . . . . 4-4
811-760C . . . . . . . . . 4-4
811-761C . . . . . . . . . 4-4
817-004C . . . . . . . . . 3-2
817-025C . . . . . . . . . 4-2
817-068C . . . . . . . . . 3-2
817-069C . . . . . . . . . 3-2
817-070C . . . . . . . . . 3-2
817-071C . . . . . . . . . 3-2
817-073C . . . . . . . . . 3-2
817-074C . . . . . . . . . 3-2
817-075C . . . . . . . . . 3-2
817-086C . . . . . . . . . 2-8
817-202C . . . . . . . . . 2-8
817-350C . . . . . . . . . 2-8
818-003C . . . . . . . . . 5-2
818-229C . . . . . . . . . 5-2
818-230C . . . . . . . . . 5-2
818-295C . . . . . . . . . 2-8
818-296C . . . . . . . . . 2-8
818-412C . . . . . . . . . 5-2
818-719C . . . . . . . . . 5-2
818-860C . . . . . . . . . 5-2
822-032C . . . . . . . . . 4-2
822-060C . . . . . . . . . 4-2
822-103C . . . . . . . . . 3-2
838-094C . . . . . . . . . 5-2
838-101C . . . . . . . . . 5-2
838-102C . . . . . . . . . 5-2
838-158C . . . . . . . . . 5-2
838-265C . . . . . . . . . 5-2
838-266C . . . . . . . . . 5-2
890-190C . . . . . . . . . 3-2
890-221C . . . . . . . . . 2-4
890-221C . . . . . . . . . 2-6
890-305C . . . . . . . . . 2-8
890-311C . . . . . . . . 2-10
890-312C . . . . . . . . 2-10
890-350C . . . . . . . . . 3-2
890-390C . . . . . . . . 2-10
890-640C . . . . . . . . 2-10
117-055P
117-055P
3/10/2004
Page 7
Table of Contents Parts Number Index
Part Number aaaaaaaaaPage Part Number aaaaaaaaaPagePart Number aaaaaaaaaPagePart Number aaaaaaaaaPage
Introduction
1-4
1
3/10/2004
117-055P
Page 8
Section 2L Box and Frame
2-1
LS10 and LS12 Levee Seeder
LS10 and LS12 Levee Seeder
Frame Assembly
Table of Contents Parts Number Index
18166
117-055P
117-055P
11/14/2001
Page 9
Table of Contents Parts Number Index
Frame Assembly
Ref. Part No. Part Description Comments
1. 119-270H LADDER AND STAND WELDMENT
2. 802-226C HHCS 1/2-13X2 3/4 GR5
3. 804-016C WASHER FLAT 1/2 SAE PLT
4. 119-237D LADDER SPACER
5. 802-159C HHCS 5/16-18X1 GR5
6. 804-036C WASHER FLAT 5/16 SAE PLT
7. 804-015C WASHER LOCK SPRING 1/2 PLT
8. 803-020C NUT HEX 1/2-13 PLT
9. 117-052H 12’ LEVEE SEEDER FRAME
9 117-053H 10’ LEVEE SEEDER FRAME S/N TT1139-
9 117-070H 10’ LEVEE SEEDER FRAME S/N TT1140+
10. 117-300D DIVERTER SPACER TUBE
11. 804-009C WASHER LOCK SPRING 5/16 PLT
12. 803-008C NUT HEX 5/16-18 PLT
13. 117-296D 12’ END DIVERTER PANEL
13 117-298D 10’ END DIVERTER PANEL
14. 117-297D 12’ CENTER DIVERTER PANEL
14 117-299D 10’ CENTER DIVERTER PANEL
15. 802-034C HHCS 1/2-13X1 1/4 GR5
16. 806-110C U-BOLT 5/8-11 X 3 1/32 X 4 1/2
17. 117-051H LEVEE SEEDER MOUNT WELDMENT
18. 804-022C WASHER LOCK SPRING 5/8 PLT
19. 803-021C NUT HEX 5/8-11 PLT
20. 117-301D UNIVERSAL MOUNTING BAR
21. 803-011C NUT LOCK 5/16-18 PLT
22. 802-390C HHCS 5/16-18X3 1/4 GR5
23. 117-061H PLOW STAND WELDMENT
24. 805-232C PIN WIRE SNAP LOCK 3 1/2
Box and Frame
2-2
2
Legend:
11/14/2001
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 10
2-3
LS10 and LS12 Levee Seeder
Box Assembly 12 Foot (10 Foot S/N TT1139-)
Table of Contents Parts Number Index
18167
117-055P
3/10/2004
Page 11
Table of Contents Parts Number Index
Box and Frame
Box Assembly 12 Foot (10 Foot S/N TT1139-)
Ref. Part No. Part Description Comments
1. 802-203C HFSS 1/2-13X1 1/2 GR5
2. 119-190D HANDLE
3. 118-487D SEED BOX IDLER COVER RH Only on 12’ box 1/31/2002 -
4. 804-011C WASHER FLAT 3/8 USS PLT Only on 12’ box
5. 804-013C WASHER LOCK SPRING 3/8 PLT Only on 12’ box
6. 802-079C HHCS 3/8-16X1 1/4 GR5 Only on 12’ box
7. 118-415H 12’ SEED BOX
7 118-413H 20’ SEED BOX LH
8. 802-387C HFS 5/16-18X3/4 GR5
9. 118-486D SEED BOX IDLER COVER LH Only on 12’ box 1/31/2002 -
10. 803-169C NUT HEX FLG. LOCK 1/2-13 PLT.
11. 803-209C NUT FLANGE LOCK 3/8-16 PLT
12. 118-402D SEED BOX PARTITION
13. 803-199C NUT HEX FLANGE 5/16-18 PLT
14. 313-076S LID HINGE ASSEMBLY PS25120 Includes items 11,16,17 and 18.
15. 802-017C HHCS 3/8-16X1 GR5
16. 313-186D LID HINGE PIVOT
17. 313-176D LID HINGE BASE PLATE
18. 802-411C RHSNB 3/8-16X2 GR5
19. 119-153D LATCH CASTING MACHINED
20. 807-106C SPRING .540 O.D.X 1 1/4 X.054W
21. 119-154D LID HANDLE
22. 804-036C WASHER FLAT 5/16 SAE PLT
23. 802-425C HHCS 5/16-18X1 1/4 NYL
24. 119-231H LID 126 11/16 SEED
24 119-229H LID 106 SEED
25. 803-011C NUT LOCK 5/16-18 PLT
26. 890-221C 12-20 x 90 LB GAS SPRING
27. 118-403D BEARING CUTOUT COVER, 47 MST 2/1/2002 +
28. 802-569C HFSS 3/8-16X1 1/2 GR5
29. 123-520D SEED BOX REINFORCEMENT STRAP
30. 802-092C RHSNB 5/16-18X3/4 GR5
31. 118-052H BOX PARTITION UPPER PAD
2-4
2
Legend:
3/10/2004
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 12
2-5
LS10 and LS12 Levee Seeder
Box Assembly 10 Foot (S/N TT1140+)
Table of Contents Parts Number Index
19627
117-055P
11/14/2001
Page 13
Table of Contents Parts Number Index
Box and Frame
Box Assembly 10 Foot (S/N TT1140+)
Ref. Part No. Part Description Comments
1. 118-828H 10’ LEVEE SEEDER BOX WELDMENT
2. 118-402D SEED BOX PARTITION
3. 119-295H 10’ LID WELDMENT
4. 890-221C 12-20 x 90 LB GAS SPRING
5. 803-011C NUT LOCK 5/16-18 PLT
6. 803-199C NUT HEX FLANGE 5/16-18 PLT
7. 802-387C HFS 5/16-18X3/4 GR5
8. 803-169C NUT HEX FLG. LOCK 1/2-13 PLT.
9. 119-190D HANDLE
10. 804-011C WASHER FLAT 3/8 USS PLT
11. 802-203C HFSS 1/2-13X1 1/2 GR5
12. 802-092C RHSNB 5/16-18X3/4 GR5
13. 804-036C WASHER FLAT 5/16 SAE PLT
14. 803-008C NUT HEX 5/16-18 PLT
15. 313-076S LID HINGE ASSEMBLY PS25120 Includes items 20,21.22 and 23
16. 119-153D LATCH CASTING MACHINED
17. 807-106C SPRING .540 O.D.X 1 1/4 X.054W
18. 119-154D LID HANDLE
19. 802-425C HHCS 5/16-18X1 1/4 NYL
20. 803-209C NUT FLANGE LOCK 3/8-16 PLT
21. 313-186D LID HINGE PIVOT
22. 313-176D LID HINGE BASE PLATE
23. 802-411C RHSNB 3/8-16X2 GR5
24. 118-403D BEARING CUTOUT COVER, 47 MST
25. 802-017C HHCS 3/8-16X1 GR5
2-6
2
Legend:
11/14/2001
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 14
2-7
LS10 and LS12 Levee Seeder
Seed Level Indicator
Table of Contents Parts Number Index
18168
117-055P
5/15/2000
Page 15
Table of Contents Parts Number Index
Box and Frame
Seed Level Indicator
Ref. Part No. Part Description Comments
1. 817-350C SEED LEVEL INDICATOR
2. 801-154C SCR HEX HD SHT MET #8 X 1/2
3. 817-086C SEED LEVEL BUSHING
4. 818-295C DECAL LETTER E No longer available. Order part no.
838-237C.
5.
5
6. 818-296C DECAL LETTER F No longer available. Order part no.
7. 803-001C NUT HEX 10-24 PLT
8. 804-004C WASHER INTERNAL STAR #10 PLT
9. 801-096C HFS 10-24 X 1 1/8 PLTD
10. 817-202C SEED LEVEL ARM MOUNT
11. 118-474H SEED LEVEL ARM, 6 3/4R. TAB
12. 805-067C PIN COTTER 1/8 X 3/4
13. 890-305C CABLE 3/64 X 11 5/8 W/ EYELETS
14. 197-089D FOAM FLOAT
15. 197-096D FOAM FLOAT WASHER
16. 804-075C WASHER FLAT 1/4 USS PLT
17. 803-255C NUT HEX NYLOCK 1/4-20
18. 800-101C RIVET POP 1/8 .125 AD42BSLF
19. 197-091D SEED LEVEL CHAIN BRACKET
838-237C DECAL SEED LEVEL LH
➋
818-392C DECAL SEED LEVEL, NOTCHED
➊
838-237C.
2-8
2
Legend:
5/15/2000
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 16
2-9
LS10 and LS12 Levee Seeder
Lights (Option)
Table of Contents Parts Number Index
20094
117-055P
4/8/2002
Page 17
Table of Contents Parts Number Index
Lights (Option)
Ref. Part No. Part Description Comments
1. 890-311C DUAL AG LIGHTS LH
1 890-312C DUAL AG LIGHTS RH
2. 150-138D 12’ EWNT LIGHT BRACKET
3. 801-151C SCR HEX SELF TAP 1/4-20X1TYPEF
4. 119-190D HANDLE
5. 802-203C HFSS 1/2-13X1 1/2 GR5
6. 890-640C LIGHT HARNESS, 5’ LEAD
7. 890-390C LIGHT HARNESS, 10’ WISHBONE
8. 800-112C CABLE TIE .19X7.25 1.75D 50LB
9. 800-148C CABLE TIE MOUNT
Box and Frame
2-10
2
Legend:
4/8/2002
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 18
Section 3L Metering
3-1
LS10 and LS12 Levee Seeder
LS10 and LS12 Levee Seeder
Feeder Cup Channel
Table of Contents Parts Number Index
18169
117-055P
117-055P
1/17/2002
Page 19
Table of Contents Parts Number Index
Metering System
Feeder Cup Channel
Ref. Part No. Part Description Comments
1. 118-527D 12’ LS FEEDERCUP TRAY
1 118-526D 10’ LS FEEDERCUP TRAY S/N TT1139-
1 118-606D 10’ LS FEEDER CUP CHANNEL S/N TT1140+
2. 118-529D 10’ LS FEEDERCUP SHAFT
2 118-528D 12’ LS FEEDERCUP SHAFT
3. 817-074C SEED CUP SLEEVE
4. 817-075C SEED CUP ASSEMBLY Includes items 23 through 29.
5. 890-190C PM SEED CUP SPROCKET
6. 890-350C 5/8 SHAFT LOCKING COLLAR
7. 801-035C SCREW SET 5/16-18 SKT KP X 3/8
8. 802-004C HHCS 1/4-20X3/4 GR5
9. 803-194C NUT HEX WHIZ 1/4-20 PLT
10. 118-725S LS BEARING ASSEMBLY Includes items 16 through 20.
11. 802-014C HHCS 3/8-16X3/4 GR5
12. 804-013C WASHER LOCK SPRING 3/8 PLT
13. 118-432D 6 5/8 BOX DVDER FOR 8 1/2 ROW
14. 118-530D 10 1/2 BOX DIVIDER
15. 118-341D 2SNT SEED BOX DIVIDER CLIP
16. 808-269C SPKT 40B25 X .630 SQ BORE
17. 118-336D FEEDER CUP BEARING HOUSING
18. 822-103C BRG 30MM B X 55MM OD
19. 800-004C SNAP RING EXT BASIC 1.880
20. 800-107C SNAP RING INT 2.165
21. 803-088C NUT HEX LOCK 1/4-20 FLG
22. 802-196C HFSS 1/4-20X5/8 GR5
23. 801-057C SCR SELF TAP 8X3/8 TYPE25 BT
24. 817-073C SEED CUP WASHER RETAINER
25. 817-004C NYLON WASHER-SPLIT
26. 817-068C SEED CUP LEFT HALF
27. 817-070C SEED CUP DOOR
28. 817-069C SEED CUP RIGHT HALF
29. 817-071C SEED CUP ADJUSTMENT HANDLE
30. 118-575D SHAFT COUPLER LS10 S/N TT1019+
LS12 S/N SS1004+
3-2
3
Legend:
1/17/2002
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 20
Section 4L Drive
4-1
LS10 and LS12 Levee Seeder
LS10 and LS12 Levee Seeder
Hydraulic Drive
Table of Contents Parts Number Index
18170
117-055P
117-055P
11/14/2001
Page 21
Table of Contents Parts Number Index
Drive
Hydraulic Drive
Ref. Part No. Part Description Comments
1. 802-097C HHCS 1/4-20X2 1/2 GR5
2. 117-285D FLOW CONTROL VALVE - PAINTED
3. 117-054H HYD MOTOR AND VALVE MOUNT
4. 804-006C WASHER LOCK SPRING 1/4 PLT
5. 803-006C NUT HEX 1/4-20 PLT
6. 806-021C U-BOLT 3/8-16 X 3 1/32 X 4
7. 808-024C SPKT 40B12 X 1 BORE
8. 136-096D CHAIN RL #40 76 PITCHES
9. 802-017C HHCS 3/8-16X1 GR5
10. 804-013C WASHER LOCK SPRING 3/8 PLT
11. 803-014C NUT HEX 3/8-16 PLT
12. 117-302D CHAIN GUARD
13. 810-407C HYD MOTOR EATON
14. 802-672C HHCS 1/2-13X4 1/2 GR5 SPTHD
15. 817-025C NO. 40 12T IDLER SPKT.
16. 803-036C NUT HEX JAM 1/2-13 PLT
17. 804-016C WASHER FLAT 1/2 SAE PLT
18. 804-015C WASHER LOCK SPRING 1/2 PLT
19. 803-020C NUT HEX 1/2-13 PLT
20. 822-032C FLANGETTE 52 MST LS10 S/N TT1019+ LS12 SS1004+
21. 822-060C BEARING 1 BORE W/LOCK COLLAR LS10 S/N TT1019+ LS12 SS1004+
22. 802-282C RHSNB 5/16-18X1 GR5 LS10 S/N TT1019+ LS12 SS1004+
23. 804-036C WASHER FLAT 5/16 SAE PLT LS10 S/N TT1019+ LS12 SS1004+
24. 804-009C WASHER LOCK SPRING 5/16 PLT LS10 S/N TT1019+ LS12 SS1004+
25. 803-008C NUT HEX 5/16-18 PLT LS10 S/N TT1019+ LS12 SS1004+
4-2
4
Legend:
11/14/2001
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 22
4-3
LS10 and LS12 Levee Seeder
Drive Hydraulics
Table of Contents Parts Number Index
18171
117-055P
11/1/99
Page 23
Table of Contents Parts Number Index
Drive Hydraulics
Ref. Part No. Part Description Comments
1. 811-759C HH1/2R2 120 1/2MNPT 7/8MORB90
2. 811-761C HH1/2R2 020 7/8MORB90 3/4FJIC
3. 811-758C HH1/2R2 024 7/8MORB 7/8MORB90
4. 811-502C AD 7/8MORB 3/4FJIC
5. 811-078C TE 3/4MJIC
6. 811-760C HH1/2R2 120 1/2MNPT 3/4FJIC
Drive
4-4
4
Legend:
11/1/99
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Page 24
Section 5L Decals
5-1
LS10 and LS12 Levee Seeder
LS10 and LS12 Levee Seeder
Decal Placement
Table of Contents Parts Number Index
18172
117-055P
117-055P
8/30/2001
Page 25
Table of Contents Parts Number Index
Decal Placement
Ref. Part No. Part Description Comments
1. 818-229C DECAL AMBER REFLECTOR 2000 and below
2. 818-719C DECAL CAUTION GENERAL INSTR
3. 838-094C DECAL WARNING HYD PRESS LONG
4. 818-412C DECAL GREAT PLAINS W/ LOGO
5.
5
6. 838-102C DECAL DANGER FALLING HAZZARD
7. 818-860C DECAL WARNING MOVING CHAIN
8. 818-230C DECAL RED REFLECTOR 2000 and below
9. 838-101C DECAL SEED RATE LEVEE SEEDER
10.
10
11.
11
12.
12
12
12
13. 818-003C DECAL SLOW MOVING VEHICLE
14. 838-158C DECAL SCRIPT SOLID STAND SMALL 2000 and above.
15. 838-266C DECAL REFLECTOR RED 1 1/2X9 2001 and above
16. 838-265C DECAL REFLECTOR AMBER 1 1/2X9 2001 and above
838-228C DECAL GREAT PLAINS ON LOGO SML 2000 and above.
➋
818-413C DECAL GREAT PLAINS ON LOGO 1999 and below.
➊
838-161C DECAL LOGO&GP F/STRIPE 4 X 24 2000 and above.
➋
818-415C DECAL GP W/ LOGO AND STRIPE 1999 and below.
➊
838-160C DECAL 3 COLOR STRIPE 2.50 WIDE 2000 and above.
➋
818-414C DECAL W/ 4 COLOR STRIPE 1999 and below.
➊
838-220C DECAL LS-10 2000 and above.
➋
838-103C DECAL SOLID STAND LS-10 1999 and below.
➊
➋ 838-221C DECAL LS-12 2000 and above.
838-104C DECAL SOLID STAND LS-12 1999 and below.
➊
Decals
5-2
5
Legend:
8/30/2001
➊
= 1st revision; ➋ = 2nd revision; ➌ = 3rd revision; ● = use up existing stock; ⊗ = not interchangeable; ⊗ ➀ ➋ = for example: revision 2 is not interchangeable w/revision 1
117-055P
Loading...