Great Plains LC40 User Manual
Table of Contents Part Number Index
Parts Manual
Stack-Fold Lister/ Cultivator
LC40
Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!
34855
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2013 Printed 07/25/13 591-049P
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction.................................................4
Using This Manual...............................................................4
Manual Replacement Information.......................................4
Manual Revisions................................................................4
Touch-up Paint....................................................................4
Hardware Legend................................................................5
Replacement Hardware......................................................5
Serial Numbers...................................................................5
Part Number Service Coding..............................................5
Frame..............................................................................6
Toolbar to Hitch...................................................................6
Wings..................................................................................8
Lights.................................................................................10
Hydraulics....................................................................12
Hydraulic Cylinder (810-780C 5x30x2 Rod)......................12
Wing Hydraulics................................................................14
Coulter..........................................................................16
Lister-Cult Mount with Extension and Shank Mount.........16
Coulter Assembly..............................................................18
Coulter Adjustment Assembly...........................................20
27W Centered Cultivator Shank........................................22
Lister Support and Furrowing Disk Assembly...................24
Barring Off Disk Assembly................................................26
Furrowing Disk Assembly..................................................28
Spring/Plug Sub Assembly................................................30
Decals...........................................................................32
Decal Placement...............................................................32
Part Number Index.......................................................34
© Copyright 2013 All rights reserved Printed 07/25/13
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
Great Plains Manufacturing, Incorporated Trademarks
Printed in the United States of America.
591-049P - 2 - 07/25/13
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
2
27W Centered Cultivator Shank...................................22
B
Barring Off Disk Assembly...........................................26
C
Coulter Adjustment Assembly......................................20
Coulter Assembly.........................................................18
D
Decal Placement..........................................................32
F
Furrowing Disk Assembly.............................................28
H
Hydraulic Cylinder (810-780C 5x30x2 Rod).................12
L
Lights............................................................................10
Lister Support and Furrowing Disk Assembly..............24
Lister-Cult Mount with Extension and Shank Mount.....16
S
Spring/Plug Sub Assembly...........................................30
T
Toolbar to Hitch..............................................................6
W
Wing Hydraulics...........................................................14
Wings.............................................................................8
07/25/13 - 3 - 591-049P
Table of Contents Part Number Index
591-049P - 4 - 07/25/13
Table of Contents Part Number Index
07/25/13 - 5 - 591-049P
Toolbar to Hitch
(Applies to LC40 only)
Table of Contents Part Number Index
34897
591-049P - 6 - 07/25/13
Toolbar to Hitch
(Applies to LC40 only)
Image No.dwg34897
40FT STACK TOOLBAR CTR FRAME591-001H1.
CAT 4-4N BOLT ON HITCH591-002H2.
PIN HTCH 1.44X8.38 USBL805-168C3.
PIN HAIR COTTER .243 WIRE PLT805-167C4.
PIN HITCH 2 X 10 7/8 PLT591-032H5.
PIN HTCH .75X4.25 USBL W/PIN805-081C6.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C7.
STACK FOLD PARKINGSTAND591-006H8.
NUT HEX FLANGE LOCK 3/4-10 PLT803-181C9.
HHCS 3/4-10X8 GR5 PLT802-469C10.
HHCS 3/4-10X9 GR5802-164C11.
U-BOLT 3/4-10 X 7 X 8 1/2806-050C12.
CALIBRATION CRANK403-414H13.
PIN WIRE RETAINING 1/4 X 1 3/4805-065C14.
ADJUSTMENT HANDLE HOLDER591-133D15.
PIN HTCH 1.25X4.50 USBL805-119C16.
PIN CLVS1.75X4.38 USBL805-291C17.
NUT HEX 3/4-10 PLT803-027C18.
HHCS 3/4-10X2 3/4 GR5802-086C19.
CAT 3 WIDE BUSHING WELDMENT591-031H20.
WASHER LOCK SPRING 3/4 PLT804-023C21.
U-BOLT 3/4-10 X 4 1/32 X 7 1/2806-154C22.
HHCS 1/4-20X1/2 GR5802-301C23.
WASHER FLAT 1/4 SAE PLT804-007C24.
WASHER LOCK SPRING 1/4 PLT804-006C25.
NUT HEX 1/4-20 PLT803-006C26.
DECAL SLOW MOVING-GALV. BACKED818-055C27.
Table of Contents Part Number Index
Frame
RevisionCommentsPart DescriptionPart No.Ref.
07/25/13 - 7 - 591-049P
Wings
(Applies to LC40 only)
Table of Contents Part Number Index
34908
591-049P - 8 - 07/25/13
Wings
(Applies to LC40 only)
Image No.dwg34908
BEDDER STACKING WING FRAME WLD591-008H1.
UPPER ARM LIFT LINK WLDMT591-004H2.
FLEX LINK WELDMENT591-003H3.
STACK FOLD EXTENSION LINK WLD591-009H4.
LUG WELDMENT401-398H5.
LINK UPPER LIFT ARM WLDMT401-314H6.
NUT HEX 1 1/2-6 PLT803-073C7.
PIN 1 1/2 X 10.75401-868D8.
PIN 1 1/4 X 11 1/4 W/HOLE401-867D9.
PIN 2 1/4 X 19 5/8 W/HOLE591-058D10.
PIN ROLL 3/8 X 2 1/2 PLT805-255C11.
PIN LINCH 5/16 X 2 11/32805-158C12.
HHCS 1/2-13X3 3/4 GR5802-042C13.
NUT LOCK 1/2-13 PLT803-019C14.
HHCS 3/8-16X2 1/2 GR5802-114C15.
NUT LOCK 3/8-16 NYLON INSERT803-078C16.
PIN CLVS1.25X3.38 USBL GR5805-196C17.
PIN COTTER 3/16 X 2 1/4 PLT805-094C18.
WASHER FLAT 1 1/4 SAE PLT804-039C19.
BUSHING SPINDLE 1 1/2X1 1/4X1890-011C20.
HHCS 3/8-16X1 1/4 GR5802-079C21.
ADJUSTMENT RETAINING CLIP591-148D22.
WASHER LOCK SPRING 3/8 PLT804-013C23.
NUT HEX 3/8-16 PLT803-014C24.
Table of Contents Part Number Index
Frame
RevisionCommentsPart DescriptionPart No.Ref.
07/25/13 - 9 - 591-049P
Lights
(Applies to LC40 only)
Table of Contents Part Number Index
34910
591-049P - 10 - 07/25/13
Lights
(Applies to LC40 only)
Image No.dwg34910
LIGHT HARNESS 18' WISHBONE833-639C1.
ENHANCED LIGHT MODULE1089802.
HARNESS EXT. 7'833-566C3.
LIGHT BRACKET MOUNT WELDMENT591-033H4.
LIGHT BRACKET MOUNT TUBE RH591-130D5.
LIGHT BRACKET MOUNT TUBE LH591-131D6.
DUAL AG LIGHT W/WP ENHANCED LH891-184C7.
DUAL AG LIGHT W/WP ENHANCED RH891-183C8.
U-BOLT 5/8-11 X 7 1/32 X 8 1/2806-052C9.
U-BOLT 1/4-20 X 2 9/32 X 3 GR2806-147C10.
WASHER LOCK SPRING 5/8 PLT804-022C11.
NUT HEX 5/8-11 PLT803-021C12.
NUT HEX NYLOCK 1/4-20803-255C13.
DECAL REFLECTOR RED 1 1/2X9838-266C14.
DECAL REFLECTR DAYTIME1 1/2X9838-267C15.
DECAL REFLECTOR AMBER 1 1/2X9838-265C16.
HHCS 1/2-13X3 1/4 GR5802-099C17.
NUT HEX FLG LOCK 1/2-13 PLT803-169C18.
Table of Contents Part Number Index
Frame
RevisionCommentsPart DescriptionPart No.Ref.
07/25/13 - 11 - 591-049P
Loading...