Old Fashioned
Gumball Machine
MODEL: 6260 Gumball Machine with Stand
6265 15 Inch Gumball Machine
6270 11 Inch Gumball Machine
ASSEMBLY & INSTRUCTIONS
Copyright 2011 DTX International
Old Fashioned Gumball Machine
ASSEMBLY AND USE
Enjoying Your Old Fashioned Gumball
Machine
|
1 |
|
Your stand-alone gumball machine comes fully assembled. If |
|
|
you purchased the gumball machine with stand, please visit |
2 |
|
page 4 of this manual for instructions on stand assembly. |
||
Your new machine is manufactured with the highest quality, |
|
|
non-toxic materials available and will give you and your family |
|
|
years upon years of enjoyment! |
3 |
|
|
||
It accepts quarters, dimes, nickels and pennies (some foreign |
4 |
|
coins too), is preset to dispense with coins, though you can |
||
|
||
convert your machine to dispense freely (see below). |
|
|
CLEANING: |
|
|
You can clean all outer parts of your machine with water and a |
5 |
|
very mild cleaner such as dish soap. DO NOT CLEAN INNER |
||
MECHANISMS AS THIS WILL REMOVE LUBRICANTS |
|
|
NECESSARY FOR OPERATION. |
|
|
FILLING YOUR GLOBE: |
6 |
|
Your machine will dispense gumballs, peanuts, hard candies, |
||
etc....and to fill your globe, first: |
|
|
1. Unscrew the cap lock (1) on the very top of the machine. |
7 |
|
2. Next, remove the cap (2) on top of the globe (5) and fill |
8 |
|
the globe. |
3. Replace cap and lock, being careful not to overtighten.
Should you ever need to remove or replace your globe, remove
the cap lock, cap, nut (3), ring and gasket (5) and then gently
9
remove the globe. To reassemble, repeat in reverse order.
To collect coins, remove the baseplate (10) from the machine body (9).
10
Copyright 2011 DTX International
Loading...