Grass Valley SFP Optical Converters User Manual

SFP Optical Converters

1310NM-DRL, 1310NM-DTL, 1310NM-TRL OPTIONS

Installation Manual

071848900
DECEMBER 2006

Affiliate with the N.V. KEMA in The Netherlands

CERTIFICATE

Certificate Number: 510040.001

The Quality System of:

Grass Valley, Inc.

400 Providence Mine Road
Nevada City, CA 95945
United States

15655 SW Greystone Ct.
Beaverton, OR 97006
United States

10 Presidential Way

rd

Floor, Suite 300

3
Woburn, MA 01801
United States

Nederland B.V.
4800 RP BREDA
The Netherlands

Technopole Brest Iroise
CS 73808
29238 Brest Cedex 3
France

7140 Baymeadows Way
Suite 101
Jacksonville, FL 32256
United States

Weiterstadt, Germany
Brunnenweg 9
D-64331 Weiterstadt
Germany

17 rue du Petit Albi-BP 8244
95801 Cergy Pontoise
Cergy, France

Rennes, France
Rue du Clos Courtel
Cesson-Sevigne, Cedex
France

2300 South Decker Lake Blvd.
Salt Lake City, UT 84119
United States

Including its implementation, meets the requirements of the standard:

ISO 9001:2000

Scope:
The design, manufacture and support of video hardware and software products and
related systems.

This Certificate is valid until: June 14, 2009
This Certificate is valid as of: August 30, 2006
Certified for the first time: June 14, 2000

H. Pierre Sallé
President
KEMA-Registered Quality

The method of operation for quality certification is defined in the KEMA General Terms
And Conditions For Quality And Environmental Management Systems Certifications.
Integral publication of this certificate is allowed.

KEMA-Registered Quality, Inc.

4377 County Line Road
Chalfont, PA 18914
Ph: [phone]
Fax: [phone]

CRT 001 073004

Accredited By:

ANAB

SFP Optical Converters

1310NM-DRL, 1310NM-DTL, 1310NM-TRL OPTIONS

Installation Manual

071848900
DECEMBER 2006

Contacting Grass Valley

International

Support Centers

Local Support

Centers

(available

during normal

business hours)

France

24 x 7

Australia and New Zealand: [phone] Central/South America: [phone]

Middle East: [phone] Near East and Africa: [phone] or [phone]

Europe

[phone] or [phone]
[phone] or [phone]

Hong Kong, Taiwan, Korea, Macau: [phone] Indian Subcontinent: [phone]

Asia

Southeast Asia/Malaysia: [phone] Southeast Asia/Singapore: [phone]
China: [phone] Japan: [phone]

Belarus, Russia, Tadzikistan, Ukraine, Uzbekistan: [phone] Switzerland: [phone]
S. Europe/Italy-Roma: [phone] -Milan: [phone] S. Europe/Spain: [phone]
Benelux/Belgium: [phone] Benelux/Netherlands: [phone] N. Europe: [phone]
Germany, Austria, Eastern Europe: [phone] UK, Ireland, Israel: [phone]

Copyright © Grass Valley. All rights reserved.
This product may be covered by one or more U.S. and foreign patents.

United States/Canada

24 x 7

[phone] or [phone]

Grass Valley Web Site

The www.thomsongrassvalley.com web site offers the following:

Online User Documentation — Current versions of product catalogs, brochures,

data sheets, ordering guides, planning guides, manuals, and release notes
in .pdf format can be downloaded.

FAQ Database — Solutions to problems and troubleshooting efforts can be

found by searching our Frequently Asked Questions (FAQ) database.

Software Downloads — Download software updates, drivers, and patches.

4 SFP Optical Converters — Installation Manual

Contents

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SFP Optical Converter Submodule Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Kameleon 2000 Fiber Ready Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

GeckoFlex 8900 Series Fiber Ready Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Kameleon 2000 Fiber Ready Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Dual Optical Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Dual Optical Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Optical Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

GeckoFlex Fiber Ready Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SFP Optical Converters — Installation Manual 5

Contents

6 SFP Optical Converters — Installation Manual

Preface

This manual describes the features of a fiber optic submodule option in the
Kameleon Media Processing System and the 8900 Series used in the
GeckoFlex frame. Refer to the laser compliance information in the
GeckoFlex Frames Instuction Manual for safety information

As part of this module family, it is also subject to Safety and Regulatory
Compliance described in the 2000 Series and 8900 GeckoFlex frame and
power supply documentation (see the 2000 Series Frames Instruction Manual
and the GeckoFlex Instruction Manual).

SFP Optical Converters — Installation Manual 7

Preface

8 SFP Optical Converters — Installation Manual

SFP Optical Converter Submodule Options

Introduction

This manual accompanies the optical/electrical converter submodule
options for fiber ready modules in the Kameleon 2000 Series and the
GeckoFlex 8900 Series. The low power, single mode SFP (Small-form Factor
Pluggable)/LC 1310nm optical converters include the following models:

• 1310NM-DRL – Dual receiver (2 inputs),

• 1310NM-DTL – Dual transmitter (2 outputs), or

• 1310NM-TRL – Transceiver (1 input/1 output).

The fiber ready modules currently available in the Grass Valley Kameleon
2000 and GeckoFlex 8900 Series are listed below:

Kameleon 2000 Fiber Ready Modules

• 2031RDA-SM SD Reclocking DA with Single-Mode Fiber I/F

• 2031RDA-MM SD Reclocking DA with Multimode Fiber I/F

• 2040RDA-FR Fiber Ready Wideband DA

• 2040RDA-16FR Fiber Ready Wideband DA (16 outputs)

GeckoFlex 8900 Series Fiber Ready Modules

• 8947RDA-FR SD/HD Distribution Amplifier

• 8949MDA-CFR SD/HD Monitoring Distribution Amplifier

• 8949MDA-SFR SD/HD Monitoring Distribution Amplifier

• 8985FSP HD/SD Frame Sync, Proc Amp

• 8985FS SD/HD Frame Sync

• 8985PRC SD/HD Proc Amp

• 8995UPC SD to HD Upconverter

• 8995DNC HD to SD Downconverter

SFP Optical Converters—Installation Manual 9

Kameleon 2000 Fiber Ready Modules

Kameleon 2000 Fiber Ready Modules

This section describes the installation and cabling of the SFP fiber optic sub­modules for the fiber ready modules in the Kameleon 2000 Series.

Installation

CAUTION The Fiber Optic submodule is static sensitive. Use static handling precautions

when installing or removing the submodule.

The SFP submodule installs in the connector cage on the rear module cor­responding to the front module in the 2000 frame. Figure 1 illustrates a rear
module using the 2040RDA-16FR as an example.

The submodule is hot-pluggable and may be installed or removed with
power applied to the main module. The submodule type is identified by
name on the label or can be identified by the direction of the two arrows on
the label (Rx-Rx, Tx-Tx, or Tx-Rx).

Input

Figure 1. Rear Module Installation for 2040RDA-16FR

SFP Submodule

Outputs J1 – J8

J6J7J8

J15J16J17

J5 J3J4 J2 J1

J14 J12J13 J11 J10

Outputs J9 – J16

connector cage

2040

RDA-16

J9

To install the optional SFP submodule, refer to Figure 2 on page 11.

1. Locate the cage connector on the top right of the rear module

corresponding to the front module.

2. With the submodule handle in the up position, slide the metal casing,

label side up, into the cage connector on the rear module.

Note When installed properly, the front end of the submodule will line up with the

BNCs. Do not try to force it in further.

8269_02

10 SFP Optical Converters—Installation Manual

Cabling

Dual Optical Receiver

Kameleon 2000 Fiber Ready Modules

Figure 2. Installing SFP Submodule

Label

Arrow Indicators

Handle in
up position

8269_11

All cabling to the 2040RDA module sets is done on the corresponding rear
module at the back of the 2000 frame. Cabling to each of the submodule
types is described below.

With a dual optical receiver (1310NM-DRL) submodule installed, one of
the optical inputs can be configured as the module input (instead of the
coax BNC).

With the submodule handle in the up position, connect an optical input to
the left (Optic 1) or right (Optic 2) side of the optical connector as shown in

Figure 3.

Use local or remote controls to configure one of the optical inputs as the
module input as described in the instruction manual for the specific
module.

Figure 3. Dual Receiver Optical Inputs

8269_12

Optic 1 (Input) Optic 2 (Input)

SFP Optical Converters—Installation Manual 11

Kameleon 2000 Fiber Ready Modules

Dual Optical Transmitter

With a dual optical transmitter (1310NM-DTL) submodule installed, the
output signal can be accessed from both optical outputs, Optic 1 (left) and
Optic 2 (right), in addition to the coax BNC outputs.

With the submodule handle in the up position, connect optical cables to one
or both outputs as shown in Figure 4.

These outputs must then be enabled with either local or remote configura­tion controls.

Figure 4. Dual Transmitter Optical Outputs

8269_13

Optic 1 (output) Optic 2 (output)

Optical Transceiver

With the optical transceiver (1310NM-TRL) submodule installed, the

2 input (right) can be configured as the module input (instead of the

Optic
coax BNC input) and the Optic
output (in addition to the coax BNC outputs).

For an optical input to the module, place the submodule handle in the up
position and connect the fiber cable to the Optic 2 input (right) as shown in

Figure 5. Use local or remote controls to configure this as the module input.

The output signal can also be accessed from the Optic 1 (left) connector
shown in Figure 5. Place the submodule handle in the up position and
connect an optical cable to this output. This output must be enabled with
local or remote configuration controls.

Figure 5. Dual Transceiver Optical Input and Output

1 output (left) can be enabled as a module

8269_14

Optic 1 (output) Optic 2 (input)

12 SFP Optical Converters—Installation Manual

GeckoFlex Fiber Ready Modules

This section of the manual describes the installation and cabling of the SFP
fiber optic submodule for the fiber ready modules in the GeckoFlex 8900
frame. The front and rear modules must be installed first according to the
instructions in the specific GeckoFlex 8900 manual.

Installation

CAUTION The Fiber Optic submodule is static sensitive. Use static handling precautions

when installing or removing the submodule.

After the front and rear modules have been installed, install the SFP Fiber
Optic submodule option into the rear module metal cage labeled FIBER

Figure 6 on page 14). The SFP submodule is hot-pluggable and may be

(
installed or removed with power applied to the module.

Note The submodule type is identified by name on the label or can be identified by

the direction of the two arrow indicators on the label.

GeckoFlex Fiber Ready Modules

1. Slide the fiber optic device into the metal fiber cage with the label and

handle to the right.

2. Push the device in as far as it will go without forcing it. It will not go

completely into the cage.

3. Cable the fiber optic connectors according to the instructions given in

Cabling on page 11.

SFP Optical Converters—Installation Manual 13

GeckoFlex Fiber Ready Modules

Cabling

Cabling to the fiber optic submodule is the same for all GeckoFlex modules
as shown in

Note 8985FSP modules shipped before June/2006 have the fiber inputs and

Figure 6. Installing Fiber Optics Submodule

Figure 6.

outputs reversed. Refer to the 8985FSP Instruction Manual for verion 1.0.0
software for cabling information.

J7J9J8

Fiber Optic Cabling

1310NM-DRL

Fiber Rx 2

Handle

FIBER

Label

Arrow Indicators:

1310-DRL

1310-DTL

1310-TRL

Fiber Rx 1

Fiber Tx 2

Fiber Tx 1

Fiber Tx 2

Fiber Rx 1

1310NM-DTL

1310NM-TRL

8489_01

14 SFP Optical Converters—Installation Manual

Configuration

Specifications

Configuration

Once the submodules have been installed and cabled, refer to the specific
2000 and 8900 module instruction manuals for configuration and operation
information. In most cases, the fiber inputs and outputs must be enabled
using onboard local controls or through the web page GUI.

Manuals are available on-line at no cost at this link:

http://www.thomsongrassvalley.com/docs/

From this location, select Broadcast Products, then Modular Products.

Table 1. Optical Submodule Specifications

Parameter Value

Fiber Inputs

Connector

Fiber mode

Minimum input power

Input signal formats Serial digital component video conforming to the following formats:

Fiber Outputs

Connector

Fiber mode

Output power

Signal type Serial digital component video conforming to the following formats:

Up to two LC

Single mode, 1310 nm nominal

-20 dBm

• SMPTE 292M (1.485 Gb/s and 1.485 Gb/s/1.oo1)

• SMPTE 259M (143 Mb/s, 177 Mb/s, 270 Mb/s, 360 Mb/s)

• SMPTE 310M (MPEG to 40 Mb/s)

• SMPTE 347M (540 Mb/s)

• 4 Mbps to 1.5 Gb/s

• DVB-ASI

Up to two LC

Single mode, 1310 nm nominal

-12 to -7.5 dBm (average @ 1310 nm)

• SMPTE 292M (1.485 Gb/s and 1.485 Gb/s/1.oo1)

• SMPTE 259M (143 Mb/s, 177 Mb/s, 270 Mb/s, 360 Mb/s)

• SMPTE 310M (MPEG to 40 Mb/s)

• SMPTE 347M (540 Mb/s)

• 4 Mbps to 1.5 Gb/s

• DVB-ASI

SFP Optical Converters—Installation Manual 15

Specifications

16 SFP Optical Converters—Installation Manual

Index

Numerics

1310NM-DRL

on 2000 module
on 8900 module 14
overview 9

1310NM-DTL

on 2000 module
on 8900 module 14
overview 9

1310NM-TRL

on 2000 module
on 8900 module 14
overview 9

C

cabling

on 2000 module
on 8900 module 14

configuration 15

D

documentation online 4

11

12

12

11

on 8900 module 13

instruction manuals

finding online

15

O

online documentation 4

R

rear module

2000 module

11

S

software download from web 4
specifications 15

W

web site documentation 4
web site FAQ database 4
web site Grass Valley 4
web site software download 4

F

FAQ database 4
fiber ready modules

Gecko Flex 8900 Series
Kameleon 2000 Series 9

frequently asked questions 4

9

G

Grass Valley web site 4

I

installation

on 2000 module

SFP Optical Converters — Installation Manual 17

10

Index

18 SFP Optical Converters — Installation Manual