GRASS VALLEY JUPITER CONTROL SYSTEM - RELEASE NOTES V7.9.0, Control System Release Note

JUPITER

CONTROL SYSTEM

Release Notes

Software Version 7.9.0

071827513

NOVEMBER 2010

Affiliate with the N.V. KEMA in The Netherlands

CERTIFICATE

Certificate Number: 510040.001
The Quality System of:

Thomson Inc, and it’s wordwide Grass Valley division affiliates DBA
GRASS VALLEY

Headquarters

400 Providence Mine Rd
Nevada City, CA 95959
United States

15655 SW Greystone Ct.
Beaverton, OR 97006
United States

10 Presidential Way
Suite 300
Woburn, MA 01801
United States

Kapittelweg 10
4827 HG Breda
The Nederlands

7140 Baymeadows Way
Ste 101
Jacksonville, FL 32256
United States

2300 So. Decker Lake Blvd.
Salt Lake City, UT 84119
United States

Rue du Clos Courtel
CS 31719
35517 Cesson-Sevigné Cedex
France

1 rue de l’Hautil
Z.I. des Boutries BP 150
78702 Conflans-Sainte
Honorine Cedex
France

Technopole Brest-Iroise
Site de la Pointe du Diable
CS 73808
29238 Brest Cedex 3
France

40 Rue de Bray
2 Rue des Landelles
35510 Cesson Sevigné
France

Spinnereistrasse 5
CH-5300 Turgi
Switzerland

Brunnenweg 9
D-64331 Weiterstadt
Germany

Carl-Benz-Strasse 6-8
67105 Schifferstadt
Germany

Including its implementation, meets the requirements of the standard:

ISO 9001:2008

Scope:

The design, manufacture and support of video and audio hardware and software products and
related systems

.

This Certificate is valid until: June 14, 2012
This Certificate is valid as of: June 14, 2009
Certified for the first time: June 14, 2000

H. Pierre Sallé
President
KEMA-Registered Quality

The method of operation for quality certification is defined in the KEMA General Terms
And Conditions For Quality And Environmental Management Systems Certifications.
Integral publication of this certificate is allowed.

KEMA-Registered Quality, Inc.

4377 County Line Road
Chalfont, PA 18914
Ph: [phone]
Fax: [phone]

CRT 001 073004

ccredited By:

ANAB

A

JUPITER

CONTROL SYSTEM

Release Notes

Software Version 7.9.0

071827513

NOVEMBER 2010

Contacting Grass Valley

International

Support Centers

Local Support

Centers

(available

during normal

business hours)

France

24 x 7

Australia and New Zealand: [phone] Central/South America: [phone]

Middle East: [phone] Near East and Africa: [phone] or [phone]

Europe

[phone] or [phone]

Hong Kong, Taiwan, Korea, Macau: [phone] Indian Subcontinent: [phone]

Asia

Southeast Asia/Malaysia: [phone] Southeast Asia/Singapore: [phone]
China: [phone] Japan: [phone]

Belarus, Russia, Tadzikistan, Ukraine, Uzbekistan: [phone] Switzerland: [phone]
S. Europe/Italy-Roma: [phone] -Milan: [phone] S. Europe/Spain: [phone]
Benelux/Belgium: [phone] Benelux/Netherlands: [phone] N. Europe: [phone]
Germany, Austria, Eastern Europe: [phone] UK, Ireland, Israel: [phone]

Copyright © Grass Valley, Inc. All rights reserved.
This product may be covered by one or more U.S. and foreign patents.

United States/Canada

24 x 7

[phone] or [phone]

Grass Valley Web Site

The www.grassvalley.com web site offers the following:

Online User Documentation — Current versions of product catalogs, brochures,

data sheets, ordering guides, planning guides, manuals, and release notes
in .pdf format can be downloaded.

FAQ Database — Solutions to problems and troubleshooting efforts can be

found by searching our Frequently Asked Questions (FAQ) database.

Software Downloads — Download software updates, drivers, and patches.

4 JUPITER — Release Notes

Contents

JUPITER Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

New Features in Jupiter Release 7.9.0 AccuSwitch . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Support for the CM-4400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setting the Subnet Mask and Gateway IP Addresses . . . . . . . . . . . . . . . . . . . . . . 8

Pro-Bel SW-P-08 Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Jupiter Router Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Entering Serial Protocol Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Entering MPK information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Pro-Bel SW-P-08 Protocol Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Remote Router Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Remote Router Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Entering Serial Protocol information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pro-Bel SW-P-08 Interface Implementation Notes . . . . . . . . . . . . . . . . . . . . . . . . 16

P8R (SW-P-08 Router Control). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

P08 (SW-P-08 Control Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Physical Serial Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Remote PC Access is No Longer Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Spanning Tree Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Upgrading to 7.9.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Caveats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Equipment Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Software Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Materials Supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Optional Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Update Only Existing Jupiter Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Installing the Jupiter Software Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Updating a Previous Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Removing the Previous Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Installing the Latest Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

JUPITER — Release Notes 5

Contents

6 JUPITER — Release Notes

Ver sion 7.9.0

JUPITER Release Notes

Introduction

This document describes new product enhancements that are provided in
the 7.9.0 version of the Jupiter Control system. The installation procedure
that should be used to upgrade a Jupiter system to the 7.9.0 version is also
described in this document (See the

Note This release only supports the English version of the Windows XP Profes-

sional Operating system.

Upgrading to 7.9.0 section).

NOVEMBER 2010

New Features in Jupiter Release 7.9.0 AccuSwitch

The 7.9.0 version of the Jupiter AccuSwitch Control system software has the
following enhancements and changes:

• Support for the CM-4400.

• Pro-Bel SW-P-08 Protocol.

• The Remote PC feature is no longer supported.

These features provide customers with improved control, convenience, and
flexibility when connecting and using Jupiter’s control panels.

Each of these features is described in detail below.

Support for the CM-4400

The 7.9.0 version of Jupiter supports the CM-4400, which is the new hard­ware platform for the AccuSwitch software.

You must set the Subnet Mask and Gateway IP addresses to run the 7.9
version of Jupiter on the CM-4400; these settings are not required on the
CM-4000.

JUPITER — Release Notes 7

Version 7.9.0

Set the Subnet Mask and
Gateway IP Addresses

Setting the Subnet Mask and Gateway IP Addresses

Follow these steps to set the Subnet Mask and Gateway IP addresses:

1. Open the Jupiter Network Suite (JNS).

2. Select the Jupiter Settings option from the Tools menu (Tools> Jupiter

Settings). The Jupiter Settings dialog will then appear.

Figure 1. The Jupiter Settings Dialog

3. Enter the Subnet Mask and Gateway IP Addresses for your system. See

your System Administrator for this information.

Note Grass Valley recommends that you enter the IP address of your Jupiter PC

and use 255.255.255.0 for the Subnet Mask if there is no Gateway. However,
only enter this information if your System Administrator does not provide the
needed information.

4. Click the Ok button to apply the changes.

8 JUPITER — Release Notes

Pro-Bel SW-P-08 Protocol

CM 4000

P8R or P08 protocol

“Hi speed serial” port

or

“Port 4”

Pro-Bel router

Any available serial port

The 7.9.0 version of the Jupiter system supports two new protocol drivers,
for AccuSwitch, that implement parts of the Pro-Bel SW-P-08 protocol. The
first driver is implemented as a standard Remote Router control interface.
The second driver is implemented as an Automation, or as a Control panel,
interface.

Figure 2. Pro-Bel SW-P-08 Router Switcher Setup

Pro-Bel SW-P-08 Protocol

This section will describe the needed setup and configuration steps to use
the Pro-Bel SW-P-08 protocol for:

• Jupiter Router control

• Remote Router control

Jupiter Router Control

You will need to configure the Jupiter CM-4000 or CM-4400 to use a Pro-Bel
SW-P-08 Router Control port. This is accomplished by adding entries in the
Serial Protocol and MPK Devices tables.

For steps to configure a CM-4000 or CM-4400 or modifying, compiling, and
validating a configuration set, see the CM 4000 Control Module or the CM­4400 Control Module manuals.

Note These steps assume that the CM-4000 or CM-4400 has been configured

properly.

Entering Serial Protocol Information

You may need to modify the Configuration set that is currently active; if so,
Grass Valley recommends that you make a copy for editing before making
these changes.

For more information about modifying the Configuration set, please see
the CM-4000 or CM-4400 Control Module manuals.

JUPITER — Release Notes 9

Version 7.9.0

Protocol

Baud Rate

Note On the Title bar of the Jupiter Configurator application you will see the name

of the Configuration set. Make sure that the configuration set that is opened
is the correct set that you want to change.

Follow these steps to enter or modify the Serial Protocol table:

1. Select the Serial Protocol option from the Jupiter menu (Jupiter > Serial

Protocol). The Serial Protocol table will then open (Figure 3).

Figure 3. Example of the Serial Protocol Table

2. Double−click the protocol box that is associated with the Serial port. A

drop-down list will show the possible protocol types.

3. Select the P08 (SW-P-08 Control Panel) protocol.

4. Click anywhere else in the table to close the entry. The default Baud

rates will be selected automatically; however, the Baud rate may be
changed by clicking the drop down menu (Figure 4).

Figure 4. The P08(SW-P-08 Control Panel) Protocol on The Serial Protocol Table

5. Click the Apply button and then save your changes.

Note The serial line parameters are:

• 38400 Baud

•8 data bits

• No parity

• 1 stop bit

• The baud rate is adjustable

10 JUPITER — Release Notes