Grass Valley ADVC G2 User Manual

ADVC G2
User Manual
ADVC G2
User Manual
March 18, 2011
Copyright © 2011 Grass Valley K.K.
All rights reserved.
Copyright Regulations
Product Notes
1. Unauthorized copying of a portion or the entirety of this product is prohibited.
2. The description and specications of this product are subject to future change without notice.
3. The description of this product has been prepared to be as complete as possible. If the reader is aware of any questionable points, errors or omissions, please contact Grass Valley.
4. The company assumes no liability for the results of practical application, regardless of item (3) above.
5. Regardless of whether negligence occurs during usage, the company assumes no liability, even if there is a claim, for extraordinary, incidental or derivative loss, including the loss of prots, that arise during practical application of this product.
6. The analysis, reverse engineering, decompiling and disassembling of the software, hardware or manuals that accompany this product, and all other related products including miscellaneous supplemental items, are prohibited.
7. ADVC is a registered trademark of Grass Valley K.K.
8. or registered trademarks of HDMI Licensing LLC.
9. Microsoft and Windows are registered trademarks of Microsoft Corporation, USA. Other product names and the like are trademarks or registered trademarks of the respective companies.
HDMI, HDMI logo and High-Denition Multimedia Interface are trademarks
About the Documentation
- If there are any variations between the explanation in this manual and the actual application method, priority is given to the actual application method.
- The screens used as examples are those of the development stage, so they may vary from those in the nal product.
Health Precautions
In rare cases, ashing lights or stimulation from the bright light of a computer display or TV monitor may trigger temporary epileptic seizures or loss of consciousness. It is believed that even individuals whom have never experienced such symptoms may be susceptible. If you or close relatives have experienced any of these symptoms, consult a doctor before using this product.
Copyright
Do not use captured image/sound data created by other ones without authorization of the right holder regardless of whether it is moving or still image, except for personal fun. Also, duplication of such data is sometimes limited even for personal hobby. Please notice that we are exempted from responsibility for the use of captured data.
DANGER
The following conditions indicate the potential for serious bodily injury or loss of life.
Handle the power cable carefully
Do not place heavy objects on top of the cord, or place it near hot objects. Doing so may damage the cable and result in re, electrical shock, or malfunction. Altering the cord, or excessively bending or pulling the cord may result in re or electrical shock. When disconnecting the power cable, pull on the plug, not the cable itself. Pulling on the cable can damage the cable and may result in re or electric shock.
Ground the product
This product is grounded through the grounding conductor of the power cable. To avoid electric shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output terminals of the product, ensure that the product is properly grounded.
Do not operate without covers
To avoid electric shock or re hazard, do not operate this product with covers or panels removed.
Do not operate in wet/damp conditions
To avoid electric shock, do not operate this product in wet or damp conditions.
Do not use the product when you hear thunder
Do not touch power supply with wet hands
Do not disconnect or plug in the power supply when your hands are wet. Contact with water may result in electric shock, re or damage.
Do not setup in an area that becomes hot
Do not setup in an area exposed to direct sunlight or near a heating apparatus. The heat can accumulate, causing burns, re or damage. Also, the unit may become deformed or change color.
Do not operate with suspected failures
If you suspect there is damage to this product, have it inspected by qualied service personnel.
Provide proper ventilation
To prevent product overheating, provide proper ventilation. When using this product, make sure to secure a space of at least 20cm behind the rear panel. If not enough space is secured, the ventilation hole that exhales heat may be blocked, resulting in overheating or other unexpected problems.
Notes on installation
Install the product where there is(are) a power socket(s) nearby, and where you can easily shut down the power to the product. Do not operate this product from a power source that supplies more than the specied voltage. Use only a power source that complies with the description on the specication label of the product.
CAUTION
The following conditions indicate the potential for bodily harm, damage to hardware or loss of data.
Do not place the product on an unstable place
Do not place the product on an unstable table or slanted surface. The product may fall from it, resulting in injuries or malfunction of the product.
Turn OFF the power when cleaning the product
When making connections with the product or cleaning the product, be sure to disconnect the power plug beforehand. Failure to do so may result in electric shock or malfunction of the product. When cleaning the product, do not use volatile solvents such as thinner.
Use proper power cable
To avoid re hazard, use only the power cable specied for this product.
Do not modify the power cable
Do not modify the power cable. Doing so may result in re or malfunction of the product.
Route the cables properly
Route the power cable and AV cables properly. If they catch on something, it may result in injuries or malfunction of the product.
Do not cover the product ventilation
Do not use the product covered with a cloth or in an ill-ventilated room. Covering the vent may cause heat inside of the product resulting in re or product malfunction.
If product will not be used for an extended period
If this product will not to be used for an extended period of time, disconnect the power cable from the electrical outlet.
Do not step on the product or put heavy objects on it
You may fall, or the object may fall off and get broken, thus causing injury.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme á la norme NMB-003 du Canada.
Declaration of Conformity
According to FCC Part 15 Responsible Party Name: Grass Valley USA, LLC. Address: 400 Providence Mine Road, Nevada City, CA 95959 Telephone: 530-478-3000
This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
README FIRST
Disclaimer
Product options and specications are subject to change without notice. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Grass Valley, Inc. Grass Valley, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication.
Warranty
This product is covered by a limited warranty when you register this product. This warranty is for a period of one year (or two years in European Union countries) since the date of purchase from Grass Valley or an authorized Grass Valley agent. This warranty can be applied only to the original purchaser of the Grass Valley product and is not transferable. Grass Valley, Inc. warrants that for this period the product will be in good working order. Should our product fail to be in good working order, Grass Valley will, at its option, repair or replace it at no additional charge, provided that the product has not been subjected to misuse, abuse or non-Grass Valley authorized alternations, modications and/or repair. Proof of purchase is required to validate your warranty. Grass Valley is not responsible for any lost prots, lost savings or other incidental or consequential damages arising out of use of, or inability to use this product. This includes damage to property and, to the extent permitted by law, damaged for personal injury. This warranty is in lieu of all other warranties of merchantability and tness for a particular purpose.
This Product Incorporates Licensed Software
Use of the software installed on this product or on the associated media is subject to the terms of end user license agreements.
Notes regarding usage
In no event shall Grass Valley be liable to user or any other party for incidental, consequential or special damages arising under the use of this product whether under theory of contract, tort, indemnity, product liability or otherwise. Except as otherwise expressly provided herein, Grass Valley makes no representations, extends no warranties of any kind, express or implied, including the warranties of merchantability, non-infringement or tness for a particular purpose, and assumes no responsibility with respect to the use of this product hereunder. Further, Grass Valley makes no warranties of proper operation of this product under other usage environment than that recommended by Grass Valley for this product.
Réglementations de copyright
Toute transgression des droits d’auteurs est condamnée par la législation sur les droits d’auteurs, sauf en cas d’utilisation équitable (pour des ns privées et non commerciales). Par ailleurs, dans certains cas, la reproduction est interdite sans exception. Grass Valley ne peut en aucun cas être tenu pour responsable des dommages directs ou indirects résultant d’une utilization des ressources capturées.
Product Notes
(1) Il est interdit de copier tout ou partie de ce produit sans autorisation expresse
préalable.
(2) Le contenu ou les spécications de ce produit peuvent faire l’objet de modications
sans préavis.
avez des questions ou si vous constatez des erreurs ou des éléments manquants, veuillez contacter Grass Valley.
(4) Cependant, nous ne saurions être tenus responsables de dysfonctionnements
résultant d’une utilisation, que les points soulignés à l’avertissement (3) soient valides ou non.
(5) Grass Valley ne saurait être tenu responsable de dommages extraordinaires, fortuits
ou dérivés, y compris de pertes de prots générés par l’application de ce produit.
(6) Toute opération d’analyse, de rétrotechnique, de décompilation ou de désassemblage
des éléments inclus dans ce produit (logiciel, matériel et documentation compris) est
formellement interdite. (7) ADVC est la marque déposée de Grass Valley. (8)
marques ou des marques déposées de HDMI Licensing LLC. (9) Microsoft et Windows sont des marques commerciales de Microsoft Corporation,
États-Unis. Les autres noms de produits ou noms associés à une marque sont des
marques ou des marques déposées de leurs détenteurs respectifs.
HDMI, le logo HDMI et High-Denition Multimedia Interface sont des
Explication relative au Guide
d’application pratique, cette dernière a priorité.
- Les écrans utilisés comme exemples ont servi pendant la phase de fabrication, ils
peuvent ainsi différer des écrans du produit ni.
Précautions en matière de santé
Dans de rares cas, les lumières clignotantes ou la stimulation entraînée par la lumière vive d’un écran d’ordinateur ou de télévision peuvent causer temporairement des crises d’épilepsie ou des pertes de conscience. Même les personnes qui n’ont jamais connu de tells symptômes peuvent être sujettes à ces troubles. Si vous ou l’un de vos parents proches avez rencontré l’un de ces symptômes, consultez un médecin avant d’utiliser ce produit.
Droits d’auteur
N’utilisez pas des données vidéo/audio capturées créées par d’autres personnes sans l’autorisation du détenteur du droit, qu’il s’agisse d’une image xe ou en mouvement, sauf pour votre plaisir personnel. De même, la reproduction de telles données est parfois limitée même pour les loisirs personnels. Veuillez noter que nous sommes dégagés de toute responsabilité pour l’utilisation de données capturées.
DANGER
Les conditions suivantes indiquent la possibilité de blessures corporelles ou de perte de vie.
Manier le câble d’alimentation avec précaution
Ne placez pas des objets lourds sur le cordon ou à proximité d’objets chauds. Si c’est le cas, vous pouvez endommager le câble et entraîner un incendie, un choc électrique ou un mauvais fonctionnement. Lorsque vous déconnectez le câble d’alimentation, tirez sur la prise et non sur le câble lui-même. En tirant sur le câble, vous pouvez l’endommager et entraîner un incendie ou un choc électrique.
Mettre le produit à la terre
Ne pas faire fonctionner le produit sans couvercle
Ne pas faire fonctionner le produit dans des conditions humides
An d’éviter un choc électrique, ne faites pas fonctionner ce produit dans des conditions humides.
Ne pas utiliser le produit en cas d’orage
Ne touchez pas le produit ou sa prise en de telles circonstances. Cela peut entraîner un choc électrique.
Ne pas toucher l’alimentation électrique avec des mains humides
Ne déconnectez pas ou ne branchez pas l’alimentation électrique lorsque vos mains sont humides. Un contact avec l’eau peut entraîner un choc électrique, un incendie ou des dégâts.
Ne pas installer le produit près dans un endroit chaud
N’installez pas le produite dans un endroit exposé à la lumière directe du soleil ou à proximité d’un appareil de chauffage. La chaleur peut s’accumuler causant des brûlures, un incendie ou des dégâts. De même, l’unité peut se déformer ou changer de couleur.
Ne pas faire fonctionner le produit en cas de soupçons de panne
Si vous remarquez que ce produit est endommagé, faites-le examiner par un personnel d’entretien qualié.
Prévoir une ventilation adéquate
An d’empêcher une surchauffe du produit, prévoyez une ventilation adéquate. Lorsque vous utilisez ce produit, assurez-vous de sécuriser un espace d’au moins 20 cm derrière le panneau arrière. S’il n’y a pas assez d’espace sécurisé, le trou de ventilation par lequel s’échappe la chaleur peut être bloqué, ce qui entraîne une surchauffe ou des problèmes inattendus.
Remarques concernant l’installation du produit
Installez le produit là où se trouvent une ou plusieurs prises électriques à proximité et où vous pouvez facilement couper l’alimentation du produit. Ne faites pas fonctionner ce produit à partir d’une source d’alimentation qui applique une tension supérieure à celle spéciée. N’utilisez pas une autre source d’alimentation que celle indiquée sur l’étiquette de spécication du produit.
AVERTISSEMENT
Les conditions suivantes indiquent la possibilité de blessures corporelles, de dommage matériel, ou de perte de données.
Ne pas placer le produit dans un endroit instable
Ne placez pas le produit sur une table instable ou une surface inclinée. Le produit peut tomber, ce qui entraîne des blessures ou un mauvais fonctionnement de ce dernier.
Couper l’alimentation au moment de nettoyer le produit
Lorsque vous procédez à des connexions sur le produit ou que vous le nettoyez, assurez-vous que la prise d’alimentation est déconnectée auparavant. Un choc électrique ou un mauvais fonctionnement du produit peuvent survenir en cas de non­respect de cette procédure. Lorsque vous nettoyez l’appareil, n’ utilisez pas des solvants volatils tels que du diluant.
Utiliser un câble d’alimentation approprié
An d’éviter un risque d’incendie, utilisez uniquement le câble d’alimentation spécié pour ce produit.
Ne pas remanier le câble d’alimentation
Ne remaniez pas le câble d’alimentation. Si vous le faites, cela peut entraîner un incendie ou un mauvais fonctionnement du produit.
Acheminer les câbles de manière adéquate
Acheminez le câble d’alimentation et les câbles AV de manière adéquate. S’ils s’accrochent à quelque chose, cela peut entraîner des blessures ou un mauvais fonctionnement du produit.
Ne pas couvrir le dispositif de ventilation du produit
Si le produit n’est pas utilisé pendant une période prolongée
Si ce produit n’est pas utilisé pendant une période prolongée, déconnectez le câble d’alimentation de la prise de courant.
Ne pas marcher sur le produit ou ne pas placer un objet lourd sur ce dernier
Vous pouvez tomber ou l’objet peut tomber et se briser, ce qui peut provoquer des blessures.
FCC Notication
Le présent équipement a été testé et approuvé comme répondant aux norms des dispositifs numériques de Classe A, conformément à la Partie 15 des règlements du FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les brouillages préjudiciables dans un environnement commercial. Cet appareil produit, utilise et peut dégager de l’énergie radioélectrique et, s’il n’est pas installé et utilisé selon les instructions, il peut être la source d’interférences gênantes pour les communications radio. L’utilisation de cet appareil dans une zone résidentielle peut également causer des interférences gênantes, auquel cas l’utilisateur s’engage à mettre  n à ces interférences à ses frais. Cet appareil numérique de la classe A est conforme á la norme NMB-003 du Canada.
Déclaration de conformité
Conformément au paragraphe 15 de la réglementation FCC Nom du responsable: Grass Valley USA, LLC. Address: 400 Providence Mine Road, Nevada City, CA 95959 Téléphone: 530-478-3000
LISEZ-MOI
Renonciation
Les options et les spécications du produit sont soumis à modications sans notication préalable. Les informations contenues dans ce manuel sont uniquement à usage informatif et sont soumises à modications sans notication préalable et ne devrait pas être interprétées comme un engagement de Grass Valley Inc. Grass Valley Inc. n’assume aucune responsabilité en cas d’erreurs ou d’imprécisions pouvant apparaître dans cette publication.
Garantie
Ce produit intègre un logiciel sous licence
L’utilisation du logiciel installé sur ce produit ou sur un support associé est soumis aux conditions d’un contrat de licence utilisateur nal.
Remarque concernant l’utilisation
Grass Valley ne sera tenu en aucun cas responsable envers l’utilisateur ou tout autre partie pour des dommages accessoires, indirects et spéciaux découlant de l’utilisation de ce produit que ce soit en vertu d’un contrat, pour un acte dommageable, une indemnités, la responsabilité du produit ou autre. Sauf disposition contraire et expresse, Grass Valley ne fait aucune déclaration, ne prolonge aucune garantie d’aucune sorte, de manière expresse ou implicite, notamment les garanties de qualité marchande, de non-contrefaçon ou d’utilisation pour un but particulier, et n’assume aucune responsabilité concernant l’utilisation de ce produit. En outre, Grass Valley ne garantit pas l’utilisation adéquate de ce produit dans des conditions d’utilisation autres que celles recommandées par Grass Valley pour ce produit.

1 Introduction

1.1 Operation environment

Ambient Temperature Operating
Ambient Humidity 8 to 80% (without condensation)
0 to 40 ˚C

1.2 Verify package contents

Please verify that the following accompanying components are included in the ADVC G2 package.
- ADVC G2 Unit
- AC adapter & Power cable
- Manual (This document)

1.3 Website

Including ADVC G2, the latest company information is announced at our Website:
http://www.grassvalley.com/products The latest drivers utilities, product manuals, FAQs, etc. are also available at our Website.
1

2 Overview

HDMI
AES/EBU
The ADVC G2 is a compact converter, designed to convert and/or downscale SDI, HDMI signals to analog. The ADVC G2 also features 3G support, and can be used as a monitoring device for HDMI and HD/SD-SDI sources, but it can also act as an HDMI to HD/SD-SDI (3G/1.5G support) converter. The AES/EBU and analog audio outputs, used for audio de­embedding, are a welcome feature in most monitoring applications.
SD/HD-SDI (3G)
SD/HD-SDI Component Composite
S-Video Analog audio
2

3 Part Name and Functions

3.1 Front panel

(3)
(1)
(2)
(4)
(1) Power LED
Lights when the ADVC G2 is operating.
(2) Down Conv. LED
Lights in Downscaling mode.
(3) SDI IN
3G-SDI input port. The LED blinks when SDI IN is selected for the input video channel. The LED is lit when a stable signal input is detected.
* The setting can be congured with DIP SW2.
(4) HDMI IN
HDMI input port. The LED blinks when HDMI IN is selected for the input video channel. The LED is lit when a stable signal input is detected.
* The setting can be congured with DIP SW2.
(5) SDI OUT
3G-SDI output ports.
(6) Ref IN
Reference signal input port. The LED is lit when REF is selected for reference signal, and if the REF signal input can be synchronized.
* The setting can be congured with DIP SW1.
(6)
(5)
(10)
(7)
(8)
(11)
(9)
3
(7) Y/CVBS
Outputs composite (BNC) or Component (Y) signal based on the setting.
* The setting can be congured with DIP SW4. See page 6 for details.
(8) Pb/S-Y
Outputs S-Video (Y) or Component (Pb) signal based on the setting.
* The setting can be congured with DIP SW4. See page 6 for details.
(9) Pr/S-C
Outputs S-Video (C) or Component (Pr) signal based on the setting.
* The setting can be congured with DIP SW4. See page 6 for details.
(10) AES/EBU OUT
Digital audio output port.
(11) ANALOG AUDIO OUT (Ch.1/2)
Balanced audio output ports. (1/4'' TRS)
Tip
See page 8 for details on input/output format.
4

3.2 Rear panel

(1) (2) (3) (4)
(1) Power connector
Connects to the DC plug of the accompanying AC adapter.
(2) OPERATION MODE switch
Use the switches to choose the operation mode. See page 7 for details.
(3) DIP switches
Use the switches to choose input/output settings. See page 6 for details.
(4) USB port
Used for rmware update.
Note
To connect the DC plug to the ADVC G2, check the direction of the power plug, and set it in the proper direction.
5

4 Hardware Settings

4.1 DIP switches

SW1 Species the reference signal.
SW2 Species the video channel for input.
SW3 Species the 3G-SDI output mode.
SW4 Species the analog video output.
SW5 Species the analog video output pedestal.
SW6 Species the analog component video level.
SW7
SW8
SW9 Species the analog audio output level.
SW10 Reserved SW11 Reserved SW12 Reserved
OFF : REF ON : Input(SDI) Internal(HDMI)
OFF : SDI ON : HDMI
OFF : Level A:Direct image format mapping ON : Level B:2x SMPTE292 HD mapping
OFF : Composite + S-Video ON : Component
* Always outputs Component unless when outputting SD signal.
OFF : 0 IRE ON : 7.5 IRE
* Takes effect only in SD output mode.
OFF : SMPTE/EBU N10 ON : Betacam Level
* Takes effect only for component SD resolution.
Species the demux analog audio channel. SW7=OFF, SW8=OFF : channel 1/2 SW7=ON, SW8=OFF : channel 3/4 SW7=OFF, SW8=ON : channel 5/6 SW7=ON, SW8=ON : channel 7/8
OFF : +0dBu ON : +4dBu
6

4.2 OPERATION MODE switch

0 Through 1 Down convert Letter Box 16:9 2 Down convert Letter Box 14:9 3 Down convert Letter Box 13:9 4 Down convert Squeeze 5 Down convert Edge Crop 6 Through 7 Through 8 Through
9 Through
7

5 Input/Output Format

5.1 Video input format

SDI input format

I/P 60 59 50 30 29 25 24 23 Standard
720 x 486 I
720 x 576 I 1280 x 720 P 1920x1035 I
I
1920x1080
PsF

HDMI input format

I/P 60 59 50 30 29 25 24 23
640 x 480 P
720 x 480
720 x 576
1280 x 720 P
1920x1080
I
P
I
P
I
P
SMPTE 125M IEC 61179-5 SMPTE 296M SMPTE 260M
SMPTE 274MP
8

SDI output format

I/P 60 59 50 30 29 25 24 23 Standard
720x486 I 720x576 I
1280x720 P 1920x1035 I
1920x1080
I
PsF
SMPTE 125M IEC 61179-5 SMPTE 296M SMPTE 260M
SMPTE 274MP
9
6 Specications

6.1 Block diagram

REFin
SDIin
HDMIin
Sync
separator
Cable
Equalizer
S/P
S/P
Audio
demux
Audio
demux
Audio
Resample
Video
Genlock
Frame
Memory
Audio
Memory
Down
Converter
Video
Encoder
Audiomux
D/A
P/S
AES/EBU Encoder
D/A
D/A
Analog Videoout
SDIout
AES/EBU out
Analog Audioout
10
6.2 Hardware specications
SDI input
Connector SDI (SD/HD/3G) – BNC
1920 x 1080 1920 x 1035
Input rasters
Framerate
Color format YCbCr Sampling structure 4:2:2 Sampling depth 10 bits Input frame buffer None
Line 21 Closed caption
3GSDI mapping Both Level A and B supported
HDMI input
Connector HDMI
Input rasters
Framerate
Color format YCbCr/RGB Sampling structure 4:2:2/4:4:4
1280 x 720 720 x 486 720 x 576
* See page 9 for details on input format.
60, 59.94, 50, 30, 29.97, 25, 24,
23.98 Hz
* See page 8 for details on input format.
Supported only in SD input (THROUGH)
1920 x 1080 1280 x 720 720 x 480 720 x 576 640 x 480
* See page 8 for details on input format.
60, 59.94, 50, 30, 29.97, 25, 24,
23.98 Hz
* See page 8 for details on input format.
11
Sampling depth
(Up to 10 bits is available for YCbCr
4:2:2) RGB -> YCbCr Conversion Supported Input frame buffer None
Audio input
SDI embedded/HDMI embedded
8 bits
Connectors
* Supports only LPCM.
* Ch3/4 is switched in HDMI
(Complied with DCI standard)
48kHz(SDI) Sample rate
Sampling depth
48/44.1/32kHz(HDMI)
* Comverted to 48.kHz before output
Up to 20/24 bits
* Up to 20 bits for SD-SDI
Embedded Audio 8ch,24 bits
Video output
3G-SDI – BNC x2
Component – BNC x3
Composite – BNC
(Common with Component Y)
S-Video – BNC x2 Connectors
(Common with Component Pb Pr)
* Available to output in the same resolution as
the input signal.
* Outputting 3G is not available for analog
output.
* See page 9 for details on output format.
1920 x 1080
1920 x 1035 Output rasters
1280 x 720
720 x 486
720 x 576
* See page 9 for details on output format.
Framerate
60, 59.94, 50, 30, 29.97, 25, 24,
23.98 Hz
12
Color format YCbCr Sampling structure 4:2:2 Sampling depth 10 bits Frame buffer 1 frame
Not supported SDI ANC data
(Outputs VITC through in SDI input
mode) 3GSDI mapping Both Level A and B supported
Down Converter
1920 x 1080 Input rasters
Output format
1280 x 720
* Black bars will be added to 1920 x 1035
video when input.
720 x 486i59.94
720 x 576i50 Color format YCbCr Sampling structure 4:2:2 Sampling depth 10 bits Framerate conversion Not supported Frame buffer None
Audio output
Digital – AES/EBU – BNC Audio Output connectors
Analog – Balance – 1/4’’ TRS
SDI embedded AES/EBU audio coding LPCM Analog audio level 0/+4dBu
Sample rate
48kHz
* 32, 44.1kHz are not supported.
Sample size 24 bits Level adjust Not supported Analog / AES/EBU
channel select
Can be selected with DIP switches
13
Embedded Audio
8ch, 20/24 bits
* 20 bits for SD-SDI.
USB
Format USB2.0 compliant Connector Mini B
Specications
Voltage
AC adapter
ADVC G2 unit Input: DC5 – 16.8V Maximum power
consumption
Dimensions
142.5(W) x 42.5(H) x 98.5 (D)mm (Projecting parts not included)
Weight 700g (approx.)
Input: AC 100 – 240V(50Hz/60Hz) Output: DC 12V 3A (Max)
12.5W
14

ADVC G2 Input & Output

Output Available REF signals for sync
Through mode
Input
Format
Connector
1080p60
1080p59.94
1080p50 1080i60
1080i59.94
1080i50 1080p30
1080p29.97
1080p25 1080p24
1080p23.98
720p60
720p59.94
720p50 720p30
HDMI
720p29.97
720p25 720p24
720p23.98
480p60/
59.94
576p50 576i50 576i50
640x480 p59.94
480i60/59.94 480i59.94 480i59.94
576i50
Analog SDI
✓ ✓
✓ ✓
✓ ✓
✓ ✓
480i59.94 480i59.94
480i59.94 480i59.94
Down-convert Analog/SDI
PAL 1080i60 Same as 576i50
NTSC 1080i59.94, 480i59.94
PAL 1080i50, 576i50 Same as 576i50 PAL 1080i60 Same as 576i50
NTSC 1080i59.94, 480i59.94
PAL 1080i50, 576i50 Same as 576i50 PAL 1080p30 Same as 576i50
NTSC 1080p29.97, 480i59.94
PAL 1080p25, 576i50 Same as 576i50 PAL 1080p24 Same as 576i50
NTSC 1080p23.98, 480i59.94
PAL 720p60 Same as 576i50
NTSC 720p59.94, 480i59.94
PAL 720p50, 576i50 Same as 576i50 PAL 720p30 Same as 576i50
NTSC 720p29.97
PAL 720p25 Same as 576i50 PAL 720p24 Same as 576i50
NTSC 720p23.98, 480i59.94
Through mode Down-convert
1080i59.94, 1080p29.97, 1080p23.98, 1080psf23.98, 720p59.94, 480i59.94 1080i50, 1080p25, 720p50, 720p25, 576i50 1080i59.94, 1080p29.97, 1080p23.98, 1080psf23.98, 720p59.94, 480i59.94 1080i59.94, 1080p29.97, 1080p23.98, 1080psf23.98, 720p59.94, 480i59.94 1080i50, 1080p25, 720p50, 720p25, 576i50
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
15
Output Available REF signals for sync
Through mode
Input
Format
Connector
1080p60
1080p59.94
1080p50 1080i60
1080i59.94
1080i50 1080p30
1080p29.97
1080p25 1080p24
1080p23.98
1080PsF24 1080PsF
23.98 1035i60
SDI
1035i59.94
720p60
720p59.94
720p50 720p30
720p29.97
720p25 720p24
720p23.98
480i59.94
576i50
* When Input Reference signal is chosen, synchronization is available only if the formats of input and
output signals are same.
Analog SDI
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Down-convert Analog/SDI
PAL 1080i60 Same as 576i50
NTSC 1080i59.94, 480i59.94
PAL 1080i50, 576i50 Same as 576i50
PAL 1080i60 Same as 576i50
NTSC 1080i59.94, 480i59.94
PAL 1080i50, 576i50 Same as 576i50 PAL 1080p30 Same as 576i50
NTSC 1080p29.97, 480i59.94
PAL 1080p25, 576i50 Same as 576i50 PAL 1080p24 Same as 576i50
NTSC 1080p23.98, 480i59.94
PAL 1080psf24 Same as 576i50
NTSC 1080psf23.98, 480i59.94
PAL 1080i60 Same as 576i50
NTSC 1080i59.94, 480i59.94
PAL 720p60 Same as 576i50
NTSC 720p59.94, 480i59.94
PAL 720p50, 576i50 Same as 576i50 PAL 720p30 Same as 576i50
NTSC 720p29.97
PAL 720p25 Same as 576i50 PAL 720p24 Same as 576i50
NTSC 720p23.98, 480i59.94
Through mode Down-convert
1080i59.94, 1080p29.97, 1080p23.98, 1080psf23.98, 720p59.94, 480i59.94 1080i50, 1080p25, 720p50, 720p25, 576i50
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
Same as 480i59.94
16
F2431103183
Loading...