Grass valley 8981FS DATASHEET
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
8900V-R
SDI
Output
Delay
Control
Output
SDI
Input
GPI
Reference
input
Loopthru
Delay
Control
Output
SDI
Output
Reference
Loopthrou gh
SDI with Embedded Audio
EDH
Detection
Timing
Generator
EDH
Insertion
Audio
Delay
Data
SDI
with
Embedded
Audio
Local
Controls
GPI
Micro-
processor
Ethernet
LED
Control
Framestor e
Output
Signal
Processor
44
8981FS SDI Frame Synchronizer/Delay
Key Features
10-bit signal processing assures •
broadcast quality
Proc. amp controls •
Various freeze options for production •
applications
Audio delay signal to drive audio delay •
cards
Functions as frame synchronizer or fixed •
delay
Up to a full frame of delay •
Cleanly handles input signal hot switches •
Passes all horizontal ancillary data (AES)•
Passes or blanks vertical interval data •
user adjustable
EHD detection and insertion•
Complete remote control with GPI or •
Ethernet interface
The 8981FS offers unparalleled functionality.
It combines the best features of a frame
synchronizer, frame delay, and digital
processing amplifier in one module. The
8981FS is designed to handle various
environments and applications including
asynchronous input video signal timing, manual
color correction, and production freeze frame
applications. It operates as a companion to
the popular 8916 AES autotracking delay
DA, and 8920ADT or 8921ADT for audio
synchronization applications. Several control
modes are also offered, including local board
controls, GPI for freeze control, and Ethernet
control over a LAN/WAN using a variety of user
friendly interfaces.
Specifications
Supported Frame Types
GeckoFlex with 8900V-R GeckoFlex Video rear module,
Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating
4.5 Watts – single slot
Input
Signal type: SMPTE 259M-C or EBU 3267
(270 Mb/s)
Connector: 75Ω BNC, terminating
Automatic cable eq.: <300 meters
Return loss: >15 dB, 5 to 270 MHz
Reference Input
Signal type: Analog color black 525 or 625 lines per
SMPTE 170M or CCIR 624
Connector: Differential loop-through BNC
Signal level: Sync level 140 mV to 560 mVp-p
Return loss: >40 dB to 5.5 MHz
Output
Signal type: SMPTE 259M-C or EBU 3267
Number of outputs: Four
Connector: 75Ω BNC
Return loss: >15 dB, 5 to 270 MHz
Audio Delay Data
Number of outputs: Two
Connector: BNC
Type: RS-232 serial data
Performance
Signal path: 10-bit
Error detection and insertion: EDH
Switching line processing: Optional black insertion
Min. electrical length (delay mode): Two lines
Output timing range: One frame
Output timing resolution: 37 ns
Operating temperature: 0° to 45°C
Operating humidity range: 0% to 90% non-
condensing
Indicators and Controls
Indicators: Signal present, line rate, reference present,
freeze mode, delay mode, fault, communication active,
configuration
Controls: Output timing, proc. amp controls, freeze,
blanking, sync/delay mode
GPI control: Freeze
Remote: All indicators and controls via Ethernet
Ordering Information
This module can be mounted in a GeckoFlex
frame when ordered with the 8900V-R GeckoFlex
Video rear module.
8981FS
SDI frame synchronizer/delay
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
Loading...