Grass valley 8960ENC DATASHEET
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Loopthru
SDI Input
625 NTSC
Reference
Reclocked
SDI
Outputs
NTSC/PAL
Outputs
NTSC/PAL
Outputs
Reclocked
SDI
Outputs
525 NTSC
Reference
8900V-R
Micro-
processor
SDI
NTSC/PAL
Horizontal
Genlock
Cross
Color
Filter
10-bit
Encoder
Optional
Frame Sync
Submodule
Output
Filter
Color
Frame ID
Remote
Reference
Reclocker
Local
Controls
SDI
Loopthrough
8960ENC SDI to NTSC/PAL Encoder
73
Key Features
10-bit signal processing•
Four NTSC/PAL outputs•
Two reclocked SDI outputs•
Proc. amp controls: luma, black, chroma, •
and hue
Full frame output phasing with 8900FSS •
submodule
Vernier timing controls •
Two built-in confidence test signals•
Dual reference inputs for multiformat •
facilities
EDH detection to track signal errors•
Remote control via frame Ethernet I/F•
The 8960ENC converts a serial component
digital signal to NTSC or PAL composite analog.
It can interface with analog VTRs, composite
analog production switchers and analog
transmitters, and accepts the 8900FSS submodule to allow output to be synchronized to
an external reference and accurately timed.
Specifications
Supported Frame Types
GeckoFlex with 8900V-R GeckoFlex Video rear module,
Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating
6.5 Watts – single slot
Input
Type: SMPTE 259M, 10-bit, 270 Mb/s serial
component digital
Connector: High Z differential loop-through BNC
Return loss: >15 dB to 270 MHz
Reference Input
Number of inputs: Two
Signal type: SMPTE 170M (525 lines) or
CCIR624 (625 lines)
Connector: BNC
Impedance: 75Ω or High Z (jumper-selectable) allows
external looping
Return loss: >36 dB to 5 MHz
Analog Video Output
Number of outputs: Four
Signal type: SMPTE 170M for NTSC and
CCIR624 for PAL
Connector: 75Ω BNC
Return loss: >40 dB to 5.5 MHz
Isolation: >46 dB to 5.5 MHz
Serial Digital Output
Number of outputs: Two
Type: SMPTE 259M, 10-bit, 270 Mb/s serial
component digital
Connector: 75Ω BNC
Output return loss: >15 dB up to 270 MHz
Performance
Quantization: 10-bit
Accuracy: 9.2-bit
Differential phase: <0.5°
Differential gain: <0.9%
RMS SNR: >59 dB to 5.5 MHz
Output phasing: Full frame with 8900FSS
submodule
Electrical length: 2.1 µs
Fine phase: 0 to 45 ns
Operating temperature: 0° to 45°C
Relative humidity: 0% to 90%
Indicators and Controls
Indicators: Input video present, reference present,
communication active, power, fault
Controls: Output gain, luma level, black level, chroma
level, hue, filters, vertical blanking, test signal, timing
Remote: All indicators and controls via Ethernet
Ordering Information
This module can be mounted in a GeckoFlex
frame when ordered with the 8900V-R GeckoFlex
Video rear.
8960ENC
SDI to NTSC/PAL encoder
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
Loading...