Graphtec GL100 Data sheet
NEW
Compact data logger
Main body
GL100-WL
w/ Wireless LAN
Shown in
actual size
GL series announces support for additional
sensors in volatile wireless and non-wireless
environments with ability to exchange
input modules.
Temp./Humidity
GS-TH
Temp. (-20 to 85 ºC),
Humidity (0 to 100 % RH)
Acceleration/Temp.
GS-3AT
Acceleration in 3-axis
(max. 10 G),
Temp. (-10 to 50 ºC)
Carbon dioxide (CO2)
GS-CO2
CO2 concentration
(max. 9999 ppm)
Dual port adapter connects up to two modules for simulatenous interface
1.
Temp./Humidity
2.
Temp./Humidity
3.
Illuminance/UV
&
Illuminance/UV
&
Carbon dioxide (CO2)
&
Carbon dioxide (CO2)
Example: 1.
Illuminance/UV
GS-LXUV
Illuminance (max. 200 klx),
UV intensity (max. 30
mW/cm²)
Dual port adapter
GS-DPA
Voltage/Temp.
GS-4VT
Voltage (max. 50V) or
4ch
Temp. (TC: K & T),
4ch 4ch
Logic or Pulse
Thermistor
GS-4TSR
Temperature
4ch
(-40 to 120 ºC),
Logic or Pulse
GS-103AT-4P
(Normal type)
GS-103JT-4P
(Ultrathin type)
retpadA / lanimreT tupnIrosneS
AC current sensor
GS-DPA-AC
Current (50, 100, 200A
Max.
RMS), Power in Single-
sen-
2
or three-phase power
sors
system
AC current sensorThermistor sensor
Example
Line-up includes combined models best suited for application base
GL100 will feature combo solutions that are packaged together and will be offered as a one stop solution as an out-of-the-box-ready
item for the specific application that best fits your need.
Combo
models for
GL100-WL
Combo
models for
GL100-N
Temp./Humidity Set: GL100-WL-TH
GL100-WL & GS-TH
Temp./Humidity Set: GL100-N-TH
GL100-N & GS-TH
Acceleration Set: GL100-WL-3AT
GL100-WL & GS-3AT
Acceleration Set: GL100-N-3AT
GL100-N & GS-3AT
Voltage/Temp. Set: GL100-WL-4VT
GL100-WL & GS-4VT
Voltage/Temp. Set: GL100-N-4VT
GL100-N & GS-4VT
Thermistor Set: GL100-WL-4TSR
GL100-WL & GS-4TSR
* Thermistor sensor is not included.
Thermistor Set: GL100-N-4TSR
GL100-N & GS-4TSR
* Thermistor sensor is not included.
Wireless access will support multiple configurations for both secured and world wide internet access
WLAN
)
Location in
the local network
WLAN
WLAN
device (#3)
PC (#3)
Smart
PC (#3) (*¹
Configuration Case 3
Smart
)
device (#3)
PC (#4)
(*²)
(
*²
(
*²
device (#4)
)
)
Smart
)
(
*²
)
(
*³
Available
functions
Control of
full functions
Control of simple
functions
(Start/Stop, Sampling, Alarm)
Display Waveform/
Digital value
Save data to PC
Receive message
via email
*1: Multiple PC cannot make connection to the GL100 simultaneously.
*2: Static global IP address needs to be assigned. Or DDNS service needs to be available,
and the GL100 needs to be configured as a device in the WAN.
Configuration Case 1
PC (#1)
: Function is available : Function is available in the condition
Smart
device (#1)
Configuration Case 2
Smart
(*¹)
PC (#2)
device (#2)
Configuration Case 1
PC (#1)
Smart
device
(#1)
WLAN
Peer-to-peer
WLAN
Peer-to-peer
Configuration Case 2
Location in the local network
With No Internet Connection
WLAN access point
WLAN
WLAN
PC (#2)
Smart
device
(#2)
Configuration Case 3 (*¹
Location in
the wide area
network (Internet)
Internet
(*¹)
PC (#4)
Smart
device
(#4)
3G
access point
www.graphtecamerica.com/instruments
Incorporate Application Software for General-Purpose or Industry-specific Customized Platform
General purpose application software will continue to have the ability to view in Y-T chart, waveform, and digital values.
The new industry-specific customize software will feature targeted software in accommodating users with indicators that
are specific and familiar to that industry.
General-purpose software for PC
General-purpose software for Smart Device (Android OS/iOS)
Waveform Screen
Digital Value Screen
Industry-specific software (for PC and Smart Device)
Specific-
Measurementv capability
industry
• Temperature Accumulation
• Humidity Deficit
Agriculture
• Amount of solar radiation
• Amount of ultraviolet rays
• Search and display
acceleration thresholds
Logistics
• Temperature Accumulation
• Humidity Deficit
Power
• AC current
measure-
• Power
ment
• Integrated power
Confirm temperature accumulation, humidity deficit, solar radiation, ultraviolet rays as part of the vital indicators for
healthy plant growth. Measure optimal saturation deficit by understanding the best conditions applied for growth,
flowering, and fruiting using temperature accumulation and optimal growth environment analysis.
Transpiration of industrial equipment, temperature controlled transport of food, and warehouse temperature
management can all be monitored to provide the safest and secured operation. Safety measurements through
monitoring the vibration of the transport vehicles can be vital to heavy-industrial and vibration sensitive equipment.
Accumulated temperature monitoring and humidity levels will be vital to keeping food fresh in a controlled
environment.
Power and electric energy levels will be displayed on the graph using measured AC current locally at the factory,
buildings and industrial equipment. Corresponds to three power systems such as two-wire single-phase, three-wire
single-phase, or three-wire in three-phase.
Sufficient capacity for data
Data Capturing Time
Built-in memory (Approx. 4.9MB)
micro SD memory card
* File size for captured data is up to 1.9GB on the micro SD memory card.
Specifications of GL100-WL, GL100-N
Item
Number of channel
Interface to PC
Functions
Display LCD (backlit monochrome, graphical type)
Storage device
Sampling interval
Output signal
Power source • Battery (AA x 2)
Operating environment
External dimension
Weight
Software
Item Description
Supported OS Windows: 8.1 / 8 / 7 / Vista (32- or 64-bit), Android OS: 4.3 or later, iOS: 7 or later
Controlled units Up to 10 units
Accessories
Item Model number Description
Thermistor sensor (Normal type)
Thermistor sensor (Ultrathin type)
AC Current sensor
AC Current sensor
AC Current sensor
Module Extension Cable
* The GL100-WL uses radio waves in the 2.4GHz band. It may interfere with other devices that use radio waves in the same frequency band. Some actions are required to avoid radio interference when necessary.
This equipment can be used in the USA, Canada, EU, and Japan by the regulations of the Wireless Telegraphy Act.
Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.
The contents of this brochure may change without any notice. For more information about products, please check the web site or contact with your local representative.
Description
Up to 4 channels
(varies by the type of input module used, and measurement type is fixed with each input module.)
USB 2.0, Wireless LAN (IEEE802.11b) in GL100-WL
• Real-time data capturing
• Display the captured data value to the LCD in real-time and save the monitoring values
• Set conditions using the Menu setting
While using Wireless LAN:
• Output captured data in real-time
• Output the saved data from the internal memory
• Full control of the GL100 from the PC application software
• Send warnings via the e-mail in GL100-WL
While using USB port:
• Output captured data in real-time
• Output the saved data from the internal memory
• Full control of the GL100 from the PC application software
• Built-in RAM (Approx. 4.9 MB)
• micro SD memory card
* Maximum file size for captured data is 1.9 GB.
0.5 to 30 seconds and 1 to 60 minutes
Alarm (1 channel), Warnings message is sent via the e-mail in GL100-WL
• USB bus-power (micro USB connector)
* The required power capacity is 5V, 1A when AC adapter for microUSB drive
is used. AC adapter is not included.
Temperature: -10 ºC to 50 ºC
Humidity: up to 80% RH (non condensed)
Water resistance: IP54
Approx. 66 x 100 x 27 mm (exclude protrusion)
GL100-N: Approx. 125 g, GL100-WL: Approx. 130 g
GS-103AT-4P
GS-103JT-4P
GS-AC50A
GS-AC100A
GS-AC200A
GS-DPA
GS-EXC
Capturing time
Approx. 296 days
Over 2 years
Sensor for GS-4TSR module, 3 m, 4 pcs/set, Temp. range: -40 to 105 ºC
Sensor for GS-4TSR module, 3 m, 4 pcs/set, Temp. range: -40 to 120 ºC
For GS-DAP-AC module, Cable 200 mm, Current range : 50 A AC
For GS-DAP-AC module, Cable 200 mm, Current range : 100 A AC
For GS-DAP-AC module, Cable 200 mm, Current range : 200 A AC
Extension cable for input module, 1.5 m long
Description
Condition Example:
Temp./Humidity sensor (GS-TH),
1 minute sampling interval
(*¹)
(*¹)
srosnes )2( owt ot pu tcennoCretpada trop lauD
Available battery option
Battery Operating Time
When saving data to the Built-in
memory with WLAN disabled
* USB power source will be required for Voltage/Temperature (GS-4VT), and CO2 sensor (GS-CO2).
Specifications of input module
Temperature & Humidity sensor (GS-TH)
Type of measurement
Measuring range
Acceleration & Temperature sensor (GS-3AT)
Type of measurement
Measuring range
Sampling interval
Illuminance & Ultraviolet sensor (GL-LXUV)
Type of measurement
Measuring range
Carbon dioxide (CO2) sensor (GL-CO2)
Type of measurement
Measuring range
Operating environment Temperature: 0 ºC to 50 ºC, Humidity: up to 80% RH (non condensed)
AC Current sensor adapter (GS-DPA-AC)
Type of measurement
Application circuit
Sensor
Measuring range
Voltage & Thermocouple input terminal (GL-4VT)
Number of channel
Measuring range
Temperature sensor input terminal (GL-4TSR)
Number of channel
Sensor Thermistor sensor (optional)
Measuring range
*1: The mail server is required for using the e-mail function.
*2: Memory capacity is up to 128 k samples in the memory mode.
*3: The measurement type for analog input channels can each be separately selected
but also available as set of 4 channels.
Temperature, and Humidity
Accumulated temp. (calculated value), Dew-point temp. (calculated value)
Temperature: -20 to 85 ºC
Humidity: 0 to 100 % RH
Acceleration in 3-axis (X-, Y-, Z-axis), and Temperature
Acceleration: ±2 (20 m/s²), ±5 (50 m/s²), ±10G (100 m/s²)
Temperature: -10 to 50 ºC
5 to 100 ms in memory mode, 0.5 s to 60 min. in direct mode
Illuminance, and UV intensity
Accumulated Illuminance (calculated value), Accumulated UV intensity (calculated value)
Illuminance: 0 to 200 klx
UV intensity: 0 to 30 mW/cm²
Carbon dioxide concentration
0 to 9999 ppm
Current
Power (calculated value), Electric energy (calculated value)
Single-phase two-wire, Single-phase three-wire system, or Three-phase three-wire
Clamp-on current probe (optional), Two (2) sensors are able to connect
50, 100, 200 A RMS (varies by the sensor)
Analog voltage 4 channels,
Logic or Pulse 4 channels
Voltage: 20mV to 50V, 1-5V FS
Thermocouple: K type (
Logic (signal pattern): 0 to 24 V (common ground)
Pules (count): Max. 200 counts/sampling intervall, accumulating up to 65535 counts
Sensor 4 channels,
Logic or Pulse 4 channels
Temperature: -40 to 120 ºC (varies by the type of sensor)
Logic (signal pattern): 0 to 24 V (common ground)
Pulse (count): Max. 200 counts/sampling interval, accumulating up to 65535 counts
Waveform ScreenDigital Value Screen
Available
to downlod
in end of 2014
Operating timeConditionCondition
Approx. 2 weeks
-200 to 1370 ºC)
Support your peculiar software
Customize your software using
the SDK (Software
Development Kit) provided by
(*³)
& T type (
(*³)
Graphtec.
The SDK will be available at
beginning 2015.
Condition Example:
Temp./Humidity sensor (GS-TH),
1 minute sampling interval,
using Alkaline battery (AA size x 2)
(*²)
-200 to 400 ºC)
www.graphtecamerica.com/instruments
Loading...