
Specifications
Model FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160
Mountable media width
Number of push rollers
Programmable resolution
Media types (*3)
Compatible OS (*4)
*1 When the 2nd pen holder is installed, the maximum cutting width is changed. (FC8600-60: 601 mm, FC8600-75: 753 mm, FC8600-100: 1053 mm, FC8600-130: 1352 mm, FC8600-160: 1613 mm)
*2 Operated with Graphtec specified media and conditions. In long-length cutting, the basket is used.
*3 When some grades of high-intensity reflective film is used, the using CB15UA/CB15UA-K30 blade and reinforcing the backing sheet of the media are recommended.
*4 For more information about compatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec .
*5 The software can be used by downloading from Graphtec website.
Options
Graphtec Pro Studio Plus
Graphtec Pro Studio Plus
for Rhinestone (1 license)
Graphtec Pro Studio Plus
for Auto Nesting (1 license)
Supplies
Blade holder
Cutting blade
Cross-cutter blade
Loupe
Fiber-tip pen holder
Water-based fiber-tip pen
Ballpoint pen holder
Oil-based ballpoint pen
Pouncing tool
OPS682-PLS Design software including all advanced functions. (1 license)
OPS682-RSF Limited edition of rhinestone function only as an advanced functions.
OPS682-ANF Limited edition of auto nesting function only as an advanced functions.
CB09-P
CB09UB-5
CB15UA-K30-5 1.5mm dia. 30º, for cutting high intensity reflective film
KB700-BK
32-bit CPUCPU
Grit rolling typeConfiguration
Digital servo driveDrive method
742 mm x 15 m590 mm x 15 mCutting area of guaranteed accuracy (*2)
50 mmMinimum
1485 mm/s at 45º directionMaximum cutting speed
Max. 39.2 m/s2 (4 G) in 8 stepsAxial acceleration
Max. 5.88 N (600 gf) in 48 stepsCutting force
0.005 mmMechanical resolution
GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GLTM: 0.025 mm
Max. 0.1 mm or 0.1 % of plotted lengthDistance accuracy (*2)
Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) Repeatability (*2)
Approx. 3 mm alphanumeric (varies depending on character font and media)Minimum character size
1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installedMountable number of tools
Supersteel (0.9 mm or 1.5 mm diameter)Blade types
Water-based fiber-tip pen, Oil-based ballpoint penPen types
Steel pin 1.5 mm diameter, required optional pouncing tool (PPA 33-TP12)Pouncing tool type
Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Regular paper from 0.06 to 0.13 mm thickCompatible paper for pouncing
Built into the tool carriageLight pointer
Built into the tool carriageCross-cutter
Supported (performed by force control)Perforation cutting
Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detectRegistration mark sensing system
Up to 0.3mm with printed imageAl ignment accuracy (*2)
USB2.0 (High Speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)Standard interface
2 MBBuffer memory
GP-GL / HP-GLTM emulation (Set by menu or command, and selects from GP-GL, HP-GLTM, or Auto select)Command sets
Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)Condition settings
Graphic type LCD (3-inch, backlight)Display
100 V to 240 V AC, 50 / 60 HzPower source
Max. 160 VAPower consumption
10 to 35 ºC, 35 to 75 % R.H. (non-condensing)Operating environment
16 to 32 ºC, 35 to 70 % R.H. (non-condensing)Guaranteed accuracy environment
Windows 10 / 8.1 / 8 / 7, Mac OS X 10.6 to macOS 10.14 (Graphtec Studio : 10.6-10.14, Cutting Master 4 : 10.7-10.14)
Cutting Master 4, Graphtec Pro Studio, Graphtec Studio(for Mac)Supported software (*4) (*5)
UL/cUL, CE markingSafetyCompatible Standards
FCC Class A , CE marking, VCCI Class AEMC
DescriptionPart No.Item
For FC8600-60 (Stock roller, bracket)RSK0020Media stocker
For FC8600-75 (Stock roller, bracket)RSK0021
For FC8600-100 (Stock roller, bracket)RSK0022
For FC8600-130 (Stock roller, bracket)RSK0023
For FC8600-160 (Stock roller, bracket)RSK0024
2nd pen holder (dealer option)ECK00092nd pen holder
Flange for media holdingOPH-A21Flange
One additional push roller (dealer option)OPH-A22Additional push roller
Description PackagePart No.Item
For 0.9mm dia. blade (CB09U series)PHP33-CB09N-HS
For 1.5mm dia. blade (CB15U series)PHP33-CB15N-HS
For 0.9mm dia. blade (CB09U series)PHP35-CB09-HS
For 1.5mm dia. blade (CB15U series)PHP35-CB15-HS
0.9mm dia. supersteel blade
0.9mm dia. supersteel blade
0.9mm dia. 60º angle, for cutting thin filmCB09UB-K60-5
1.5mm dia. supersteel bladeCB15U-5
1.5mm dia. 30º angle, for cutting sandblast rubberCB15U-K30-5
1.5mm dia. for cutting high intensity reflective filmCB15UA-5
Standard typeCT01H
High durability typeCT02U
Checking blade length, for PHP33 and PHP35 seriesPM-CT-001
For KF700 series penPHP31-FIBER
Black colour penKF700-BK
Red colour penKF700-RD
For KB700 penPHP34-BALL
Black colour pen
Steel pin 1.5mm dia.PPA33-TP12
1043 mm x 10 m,
894 mm x 15m
1 set/pack
1 set/pack
1 set/pack
1 set/pack
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
1 blade/pack
1 blade/pack
1 set/pack
1 set/pack
10 pens/pack
10 pens/pack
1 set/pack
10 pens/pack
1 set/pack
Standard accessories
Item
Cutting blade holder
Cutting blade
Fiber-tip pen holder
Water-based fiber-tip pen
Media stocker
Basket
USB cable
DVD-ROM
Printed document
1342 mm x 10 m,
894 mm x 15 m
1
1
PG0039
PG0040
PG0041
PG0042
PG0043
1
1
1
1
DescriptionQ'ty
The type of cord is different by destination1Power cord
PHP33-CB09N-HS1
CB09UB1
PHP31-FIBER
KF700-BK (black ink)1
Parts kit of stand1Stand
Set of stock rollers and mounting brackets
(Installed on the stand)
Parts kit for FC8600-60
Parts kit for FC8600-75
Parts kit for FC8600-100
Parts kit for FC8600-130
Parts kit for FC8600-160
Cable for USB2.0, 2.9m long
Plotter Controller,
Cutting Master4
(plug-in software for illustrator/
CoreIDRAW in Windows,illustrator in Mac),
Graphtec Pro Studio
(design software for Windows),
Graphtec STUDIO
(Design software for Mac)
Quick start and safety guide
1626 mm x 50 m1372 mm x 50 m1067 mm x 50 m762 mm x 50 m610 mm x 50 mMaximun cutting area (W x L) (*1)
1603 mm x 10 m,
894 mm x 15 m
1850 mm1529 mm1224 mm920 mm770 mmMaximum
1750 mm1496 mm1191 mm886 mm734 mmMaximum cross cut width
4 rollers3 rollers3 rollers2 rollers2 rollers
2138 x 715 x 1219 mm1878 x 715 x 1219 mm1578 x 715 x 1219 mm1278 x 715 x 1219 mm1128 x 715 x 1219 mmExternal dimensions (W x D x H) (approx.)
59 kg including stand54 kg including stand46 kg including stand42 kg including stand38 kg including standWeight (approx.)
Brand names and product names listed in this brochure are the trademarks or registered trademarks of their re spective owners.
Items mentioned are subject to change without notice. For more information about product, please check the we b site or contact your local representative.
For using equipment in correctly and safely
The before using it, please read the user ma nual and then please use it p roperly in accordance with the description.
To avoid a n occurrence of malfu nction or an electric shock by leakage, ple ase ensure ground co nnection and use it i n specified power so urce.
503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan
Tel : +81-45-825-6250 Fax : +81-45-825-6396
Website
http://www.graphteccorp.com
FC8600_JE10545_10P