Grandstream Networks WP820 User Manual

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215. USA
Tel : [phone] - 9300
Fax: [phone] - 1987

www.grandstream.com

In all EU member states, operation of 5150

- 5250 MHz is restricted to indoor use only.

WP820

Enterprise Portable Wi-Fi Phone

For Warranty and RMA information, please visit

www.grandstream.com

Quick Installation Guide

EN

The WP820 is not pre-confgured to support or

make emergency calls to any type of hospital,
law enforcement agency, medical care unit
(“Emergency Service(s)”) or any other kind of
Emergency Service. You must make additional
arrangements to access Emergency Services.
It is your responsibility to purchase SIP-compli­ant Internet telephone service, properly con-

fgure the WP820 to use that service, and peri ­odically test your conguration to conrm that

it works as you expect. It is also your responsi­bility to purchase traditional wireless or land­line telephone services to access Emergency
Services.

PRECAUTIONS

•Do not attempt to open, disassemble, or modify the device.

•Do not use a third party power adapter.

•Do not expose the device to temperatures outside the range
of 0 °C to 45 °C (32F to 113F) in operation and -20 °C to 60 °C
(-4F to 140F) in storage.

•Do not expose the WP820 at environments outside of the hu­midity range of 10-90% RH (non-condensing).

OVERVIEW

This powerful portable Wi-Fi phone features dual-band

802.11a/b/g/n Wi-Fi, Wi-Fi roaming and integrated Bluetooth.
It also bears a durable sleek design that allows it to drop
safely from 1.2 meters and great endurance with 150 hours
standby time and 7.5 hours talk time. The combination of ad­vanced telephony features and durability make it ideal for
mobilizing your VoIP network in residences, warehouses, retail
stores, hotels and more.

GRANDSTREAM DOES NOT PROVIDE CON­NECTIONS TO EMERGENCY SERVICES VIA THE
WP820. NEITHER GRANDSTREAM NOR ITS OF­FICES, EMPLOYEES OR AFFILIATES MAY BE HELD
LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS,
AND YOU HEREBY WAIVE ANY AND ALL SUCH
CLAIMS OR CAUSES OF ACTION ARISING FROM
OR RELATING TO YOUR INABILITY TO USE THE
WP820 TO CONTACT EMERGENCY SERVICES,
AND YOUR FAILURE TO MAKE ADDITIONAL AR­RANGEMENTS TO ACCESS EMERGENCY SER­VICES IN ACCORDANCE WITH THE IMMEDIATE­LY PRECEDING PARAGRAPH.

~1~ ~2~

WP820 PACKAGE CONTENTS

1x Charging
Station

5V

1x Quick Installation Guide
1x GPL Statement

1x WP820
Handset

1x Rechargeable
Battery

1x 5V Power
Adapter

1x Handset
Belt Clip

SETTING UP THE WP820

Charging Station:

Plug the power adapter into a power source socket to start
using the charging station.

1

1: Charging station
2: Power adapter

WP820 DESCRIPTION

1. Proximity
Sensor

2. Earphone

11. LED
indicator

12. 3.5 mm
headset jack

2

5V

Handset:

• Open the battery cover.

• Insert the battery with the electrodes in the bottom left
corner.

• Close the battery cover.

Note: Please charge the battery fully before using the hand-

set for the rst time.

3

1: Battery cover
2: Battery
3: Rear of handset

1

2

~3~ ~4~

3. Volume
Up key

4. Volume
down key

5. PTT key

6. Handsfree /
Speaker key

7. 4 Arrow key
combination
(Up, Down,
Left, Right)

8. Off-hook /
Dial key

9. Alphanumeric
keypad

10. */ Mute key

13. Color LCD
Screen

14. Softkeys

15. Contacts

16. Menu/Ok key

17. On-hook or
Power key

18. #/ Lock key

19. Microphone

CONNECTING WP820 TO WI-FI NETWORK

1. On LCD menu, press Menu key and navigate to Settings →
Network Settings → Wi-Fi.

2. Set Wi-Fi to “On” and navigate to “Wi-Fi Settings”. A list of
Wi-Fi networks will be displayed.

3. Select the desired network to connect to. (Enter the correct
password to connect if requested)

WP820 will display Wi-Fi icon on top of the main LCD menu if
the connection to the Wi-Fi network is successful.

ACCESSING WP820 WEB GUI

1. On LCD menu, press Menu key and navigate to Settings →
About → Network Status to obtain the IP address.

2. Type the phone’s IP address in your PC browser.
Note: The computer needs to be on same network as WP820.

3. The default administrator username and password are
“admin”; the default end-user username is “user” and the
password is “123”.

FCC warning

This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:

(1)The device may not cause harmful interference, and
(2)this device must accept any interference received, including interference
that may cause undesired operation.

Changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed

harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

to provide reasonable protection against

Refer to online documents and FAQ for more detailed
information: http://www.grandstream.com/our-products

~5~ ~6~

Specific Absorption Rate (SAR) information:

Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted

by the FCC with the devices transmitting at its highest certified power
level in all tested frequency bands, although the SAR is determined
at the highest certified power level, the actual SAR level of the devices
while operating can be well below the maximum value.

Before a new model devices is a available for sale to the public,
it must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC, Tests for each devices are
performed in positions and locations (e.g. at the ear and worn on the
body)as required by the FCC.
For body worn operation, this model phone has been tested and meets
the FCC RF exposure guidelines when used with an accessory designated
for this product,body-worn operating is limited to the belt-clip and accessory.

Non-compliance with the above restrictions may result in violation of
RF exposure guidelines