Grandstream Networks BroadWorks BroadSoft GXW-400X, BroadWorks BroadSoft HT-50X, GXW-4004, GXW-4008, HT-502 Configuration Manual

BroadSoft Partner

Configuration Guide

Grandstream GXW-400X

FXS Analog Gateway

&

HandyTone HT-50X

Analog Telephone Adapter

April 2007

Document Version 1.1

BroadWorks® Guide

Copyright Notice

Copyright © 2007 Grandstream Netw orks, Inc.
All rights reserved.
Any technical documentation that is made available by Grandstream Networks, Inc. is

proprietary and confidential and is considered the copyrighted work of Grandstream
Networks, Inc.

Trademarks

BroadWorks® and BroadWorks Assistant™ are trademarks of BroadSoft, Inc.
Microsoft, MSN, Windows, and the Windows logo are registered trademarks of Microsoft

Corporation. Other product names mentioned in this manual may be trademarks or
registered trademarks of their respective companies and are hereby acknowledged.

This document is printed in the United States of America.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 3 OF 25

Document Revision History

Version Reason for Change

1.1 Introduced document.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 4 OF 25

Table of Contents

1 Overview.............................................................. ................ ................. ................ ........ ......... ..........5

2 BroadWorks Validation Package Support Level.......................................................................6

3 Device Capabilities and Known Interoperability I ssues...........................................................7

3.1 Capabilities................................................................................................... ................ .................7

3.2 Interoperability Issues.................................................................................. ...................... ...........9

4 BroadWorks Device Identity/Profile..........................................................................................10

5 BroadWorks Device Type...........................................................................................................11

6 Configuration............................................................................................................. ..... ...... ........12

6.1 System Level Configuration..................................................................................................... .13

6.2 Subscriber Level Configuration Parameters............................................................................14

7 Enhanced IP Phone Configuration............................................................................................15

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 5 OF 25

1 Overview

This document describes the configuration procedures required for a Grandstream GXW­4004 / GXW-4008 / HT-502 to make full use of the c apabilities of Bro adWorks.

The GXW-4004 / GXW-4008 / HT-502 are a few of the many access devices that
interoperate with BroadWorks.

The GXW-4004 / GXW-4008 / HT-502 uses the Session Initiation Protocol (SIP) to
communicate with BroadWorks for call control. It also translates voice to audio packets for
transmission across a packet network.

This guide describes the specific configuration items that are important for use with
BroadWorks. It does not describe the purpose and use of all configuration items on the
GXW-4004 / GXW-4008 / HT-502. For those details, see the GXW-4004 / GXW-4008 /
HT-502 User Manual supplied by Grandstream 1.a)i.[1]

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 6 OF 25

2 BroadWorks Validation Package Support Level

Devices are validated according to BroadWorks Validation Packages. Each package
validates a subset of features or items. This section describes the device’s support level
for a BroadWorks Validation Package as well as the features or items in the package that
are not supported. For specific issues, see section 3.2 Interoperabilit y Issues. For a
complete list of items validated per package, see Appendix B: BroadWorks Validation

Package Test Items.

BroadWorks Package Support Level Items Not Supported

Basic Call Full
BroadWorks Enhanced Services Partial Ring Splash

Advanced Call Control (Talk, Auto­Answer)

DUT Services – Call Control Partial Network Conference 3-Way

Network Conference N-Way

DUT Services – Registration and
Authentication

Partial BroadWorks Authentication

DUT Services – FAX Full
DUT Services – Busy Lamp Field None
Redundancy Full
SBC/ALG Full
Shared Call Appearance None
Video None
TCP Full

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 7 OF 25

3 Device Capabilities and Known Interoperability Issues

This section describes the features supported by the GXW-4004 / GXW-4008 / HT-502,
as well as BroadWorks interoperability issues and impact. The following table describes
capabilities.

Verified Revisions shows the results of partner (vendor) testing of a specific BroadWorks
version with a specific partner’s device under test (DUT) version.

Compatible Revisions indicates the maintenance versions that should interface properly
with BroadWorks.

3.1 Capabilities

Device Type

Generic SIP Smart (Proxy Addr)

Lines and Appearances

GXW-4004: 4 lines 1 appearances per line
GXW-4008: 8 lines 1 appearances per line
HT-502: 2 lines 1 appearances per line

Speaker/Power/Bridge

No/No/Yes

Verified Revisions

BroadWorks Release 14.0
GXW-4004: Grandstream 1.0.0.39
GXW-4008: Grandstream 1.0.0.39
HT-502: Grandstream 1.0.0.39

Compatible Revisions

BroadWorks Release 14.0
Grandstream Any maintenance version of GXW-

4004/GXW-4008/HT-502 1.0.0.39

SIP Proxy FQDN DNS Lookup
(A, SRV, NAPT R)

A, SRV

Outbound Proxy Configurable

Yes

Outbound Proxy FQDN DNS Lookup
(A, SRV, NAPT R)

A, SRV

BroadWorks Redundancy Enabled

Yes

BroadWorks Shared Call Appearance

N/A

BroadWorks Enhanced IP Phone
Configuration

Partial

Device Services

Call Forwarding, Attended/Blind Call Transfer, 3-way
Call, Call Waiting, Call Hold, Call Return.

Device Call Control
(Device-Controlled or Flash INFO-

based)

Device-Controlled

Codecs

PCMU, PCMA, G723.1 G729A/B/E, iLBC, G726­16/24/32/40

RFC 2833 DTMF

Yes

T.38 Fax

Yes

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 8 OF 25

TCP

Yes

TLS

Yes

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 9 OF 25

3.2 Interoperability Issues

This section lists the known interoperability issues between BroadWorks and partner
release(s). For more information on issues related to the particular software release, see
the partner release note s (generally, this should only be for GA partner releases).

Issue Tracking
Number

Issue Title and Description Partner Releases

BroadWorks Release 14

1.0.0.39

1025 - 61

Broadworks to DUT, Do Not Disturb (DND) ring splash

DUT does not play a ring splash. DUT driver does not support ring
splash.

X

1025 -119 DUT to BroadWorks via Primary Application Server, DUT

Currently Served by Secondary Application Server

DUT does not always contact the primary server first for INVITE. It
relies on the OPTIONS message from BroadWorks to failback.

When DUT is registered on secondary server and the primary
server becomes available and sends an OPTIONS request, DUT
will send INVITE to the primary server.

X

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 10 OF 25

4 BroadWorks Device Identity/Profile

BroadWorks configurable device identify/profile is introduced in BroadWorks Release 14.0.
This section applies only to BroadWorks Release 14.0 and later.

The following table identifies the required BroadWorks device identity/profile settings for
interoperability between the GXW-4004/GXW-4008/HT-502 and BroadWorks. For an
explanation of the profi le para meters, refer t o the BroadWorks Device Inventory Guide

1.a)i.[4].

For most of the parameters below, an “X” indicates the parameter function is supported
and/or required. If the item is blank, it is n ot supported.

Grandstream GXW-4004/GXW-4008/HT-502 Identify/Device Profile

Signaling Address Type

Intelligent Proxy Addressing

Number of Lines

GXW-4004: 4 lines
GXW-4008: 8 lines
HT-502: 2 lines

Ringback Tone/ Early Media
Support

Local Ringback – No Early Media

Registration Capable

X

Static Registration Capable
E.164 Capable
Trusted
Authentication Override
Video Capable
RFC 3264 Hold

X

Route Advance
Wireless Integration
PBX Integration
Use Business Trunking Contact
Forwarding Override
Conference Device
Music On Hold Device
Web Based Configuration URL
Auto Configuration Type

2 Config file

Reset Event

checkSync

Enable Monitoring
CPE System File Name

gxwSystem.txt / htSystem.txt

Device File Format

%BWMACADDRES%.txt

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 11 OF 25

5 BroadWorks Device Type

This section applies to BroadWorks Release 13.0 and before.

The following BroadWorks device type should be used for Grandstream GXW-4004 /
GXW-4008 /HT-502.

 Grandstream GXW-40 04
 Grandstream GXW-40 08
 Grandstream HT-502

The above device types require BroadWorks Release 14 MP<TBD>. If the BroadWorks
system is currently at a lower patch level, either apply the necessary patch or use the
following generic device type until the system can be patched accordingly.

 Generic SIP Smart (Proxy Addr)

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 12 OF 25

6 Configuration

Grandstream GXW-40 04 / GX W-4008 / HT-5 02 can b e config ured vi a Web G UI Interf ace
as well as via Configuration File through TFTP or HTTP.

The GXW-4004 / GXW-4008 / HT-502 accepts configuration files in a proprietary binary
format which is produced by the Grandstream configuration tool. The configuration tool
creates a device configuration file based on a configuration template and the device’s
MAC address. All Grandstream products’ sample configuration templates are available on
Grandstream’s w eb si te. A configu ration temp late file c ontains all config uration
parameters available f or a pr oduct , with c omments desc ribing allow ed valu es of the
parameters. For a detailed parameter list, please refer to the corresponding firmware
release configuration te mplate 1.a)i.[2].

When Grandstream device boots up or reboots, it w ill issue request for a binary
configuration file named “cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the LAN MAC
address of the device, i.e., “cfg000b820102ab”. The configuration file name should be in
lower cases.

Grandstream offers fre e Configur ation Fil e generat or softw are in both Linux/Un ix and
Windows platform. Both Configuration File Generators can be downloaded from
Grandstream official w eb site at http://www .grandstream.com/co nfigurationtool.html

1.a)i.[2].

The following examples describe how to set the parameters using a configuration file.
The GXW-4004 / GXW-4008 / HT-502 should be configured to load the configuration file
each time it resets or re-synchronizes. For detail ed info rmation on a utomat ed prov isioni ng,
please check the GXW-4004 / GXW-4008 / HT-502 User Manual 1.a)i.[1] and the
Grandstream configuratio n tool user guide 1. a)i.[2].

The capabilities of the GXW-4004 / GXW-4008 / HT-502 have been verified for use w ith
BroadWorks based on the settings described in the follow ing table. For more info rmation
on the meaning, purpose, and applicability of the individual configuration items, see the

GXW-4004 / GXW-4008 / HT-502 configuration template 1.a)i.[2].

Configuration Files

Files Provided by Partner Level Description

gxw4004prog.bin/gxw4004core.bin/gxw4
004boot.bin/gxw4004base.bin

gxw4008prog.bin/gxw4008core.bin/gxw4
008boot.bin/gxw4008base.bin

ht502prog.bin/ht502core.bin/ht502boot.bi
n/ht502base.bin

System Contains the device firmware load.

GXW-4004 / GXW-4008 / HT-502
Configuration Template

Example: gxw400x_config_1.0.0.39.txt
ht502_config_1.0.0.39.txt

System and
Subscriber

Contains configurable parameters that
apply to all devices in a given
deployment.

cfgMAC
Example: cfg000b82000000

System and
Subscriber

Binary configuration file generated
from configuration template and an
individual device’s MAC address

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 13 OF 25

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 14 OF 25

6.1 System Level Configuration

This section describes system-wide configuration items that are generally required for
each GXW-4004 / GXW-4008 / HT-502 to work with BroadWorks. Subscriber-specific
settings are described in the next section.

Step Command Purpose
System Configuration File <system-wide configuration file name>

Step 1

Set SIP Proxy/Domain.

SIP Server = as.broadworks.net

Set the GXW-4004 / GXW-4008
/ HT-502 SIP server to the Fully
Qualified Domain Name (FQDN)
for the BroadWorks Application
Server cluster.

The domain must match the
domain configured for the
BroadWorks subscriber’s
line/port domain.

Step 2

Set Outbound Proxy.

OutBound Proxy =
sbc.broadworks.net

Set the outbound proxy to the
session border controller (SBC)
if one is deployed between the
GXW-4004 / GXW-4008 / HT­502 and BroadWorks.

If there are redundant SBCs, set
it to the FQDN for the SBC
cluster.

Step 3

Enable DNS SRV lookup.

Use DNS SRV = “Yes”

Enable DNS SRV lookups.

Step 4

Set register mode.

SIP Registration = “Yes”

Enable SIP register.

Step 5

Set SIP Timers.

Register Expiration = 60

The default registration period is
60 minutes.

Step 6

Enable negotiated DTMF type.

Send DTMF = “via RTP (RFC2833)”

Set the GXW-4004 / GXW-4008
/ HT-502 to enable inband or
RFC 2833 negotiated DTMF.

Step 7

Configure dialplan.

Example:
Dial Plan = “{ x+ }”

Configure the GXW-4004 /
GXW-4008 / HT-502 dial plan
according to the locale.

The dial plan shown is the
device default dial plan – any
number is allowed.

Step 8

Disable local feature code
services.

Enable Call Features = “No”

Disable feature access codes
controlled by the device.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 15 OF 25

6.2 Subscriber Level Configuration Parameters

This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices in order to be matched with
the settings for a BroadWorks subscriber.

Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber’s line. Registrati on req uires that a unique addres s of recor d (AoR) is
provisioned on Broa dWorks and th e phon e; provis ioning an AoR on Broa dWork s consis ts
of setting the line/port parameter to a unique value within the Application Server cluster.

Grandstream GXW-4004 / GX W-4008 / HT -502 suppo rts four SIP acco unts (lines), eig ht
SIP accounts, and two SIP accounts respectively. The follow example shows how to
configure subscriber elements for an account.

Step Command Purpose
Subscriber Configuration Items

Step 1

Set Register User ID for each
line.

Example:
SIP User_ID = "2405551111" ;

The register user ID must
correspond with the line/port
setting on BroadWorks.

Step 2

Enable SIP Authentication for
each line.

Example:
Authenticate ID =

"[e-mail]" ;
Authenticate Password =

"welcome" ;

If the Authentication service is
configured on BroadWorks, these
parameters must be configured to
match the BroadWorks settings.

Step 3

Configure display name for each
line.

Example:
Name = “Claire Smith” ;

For each line, configure the name
to be displayed on the device.

Step 4

Select SIP Profile for each line.
Example:
Profile ID = Profile 1

Set SIP Profile or each line.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 16 OF 25

7 Enhanced IP Phone Configuration

Enhanced IP Phone Configuration is a BroadWorks feature that enables automatic
generation of device confi guration fil es, given a dminist rator-sup plied te mplates.

For more information on the Enhance d IP P hone Con figurat ion featur e, see the Enha nced

IP Phone Configuration Guide 1.a)i.[3].

NOTE: BroadSoft does not manage or distribute template files for use with the Enhanced IP
Phone Configuration feature. Obtain template files from Grandstream or use the configuration
files obtained from Grandstream for the specific GXW-4004 / GXW-4008 / HT-502 firmware
release to create template files appropriate for your installation.

Since the GXW-4004 / GXW-4008 / HT-502 SIP phones require the configuration files be
converted into a binary format, an extra step must be performed when using this feature. After
the configuration files have been sent to the TFTP server and before the phone is reset, the
configuration files must be converted to binary format using Grandstream’s configuration tool. .
For detailed information on automated provisioning, please check the Grandstream configuration
tool user guide 1.a)i.[2].

The GXW-4004 / GXW-4008 / HT-502 use only a phone-specific file to configure the
device. However, the Enhanced IP Phone Configuration feature requires a system and a
phone-specific file for each device. To satisfy the system file requirement, an empty file
(gxwDefault.txt, htDesfult.txt) will need to be uploaded to BroadWorks as the system file.
This file will be sent to the FTP server but will not actually be used for the configuratio n file
generation. The group template file is used to build the c onfiguration f iles for the devic es
of this device type assigned to the group. For a sample GXW-4004 / GXW-4008 / HT-502
group template file, see Appendix A.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 17 OF 25

Appendix A: Sample GXW-4004 / GXW-4008 / HT-502 Configuration Files

NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT
AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGUR ATION FILES. Use the
configuration files obtained from Grandstream with the specific release to generate your configuration
files.

System Default P aram eter s

NOTE: This is an example file and should be used for reference only.

# SIP Default Generic Configur ation Pa ramete rs

###################### ######## ####
# Profile/Account 1 #
###################### ######## ####

# Profile Active. 0 - no, 1 - yes
P271 = 1

# SIP Server
P47 = as.broadworks.net

# Outbound Proxy
P48 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes .
P103 = 1

# SIP Registration. 0 - no, 1 - yes
P31 = 1

# Register Expiration (in minu tes. defaul t 1 hour, max 45 days)
P32 = 60

# DTMF via RTP (RFC283 3). 0 - no, 1 - yes
P851 = 1

# Dial Plan.
P4200 = { x+ }

# Enable Call Features . 0 - no , 1 – ye s
P191 = 0

###################### ######## #####
# Profile/Account 2 #
###################### ######## #####

# Profile Active. 0 - no, 1 - yes
P401 = 1

# SIP Server
P747 = as.broadworks.net

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 18 OF 25

# Outbound Proxy
P748 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes .
P702 = 1

# SIP Registration. 0 - no, 1 – yes
P731 = 1

# Register Expiration (in minu tes. defaul t 1 hour, max 45 days)
P732 = 60

# DTMF via RTP (RFC283 3). 0 - no, 1 - yes
P861 = 1

# Dial Plan.
P4201 = { x+ }

# Enable Call Features . 0 - no , 1 – ye s
P751 = 0

Phone-Specific Parameters:

NOTE: This is an example file and should be used for reference only.

# SIP Device-specific Configur ation Param eters

###################### ######## ####
# HT-502 Account 1 #
###################### ######## ####

# SIP User ID
P35 = 2405551111

# Authenticate ID
P36 = [e-mail] y.com

# Authenticate password
P34 = welcome

# Display Name
P3 = Claire Smith

###################### ######## ####
# HT-502 Account 2 #
###################### ######## ####

# Account 2 SIP User ID
P735 =

# Authenticate ID
P736 =

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 19 OF 25

# Authenticate Password
P734 =

# Display Name
P703 =

###################### ######
# GXW-4004/GXW-4008 #
###################### ######

# FXS Port 1
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4060 =
P4090 =
P4120 =
P4180 =
P4150 =

# FXS Port 2
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4061 =
P4091 =
P4121 =
P4181 =
P4151 =

# FXS Port 3
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4062 =
P4092 =
P4122 =
P4182 =
P4152 =

# FXS Port 4
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4063 =
P4093 =
P4123 =
P4183 =
P4153 =

###################### ######## ######## ###### ######## #
# The following 4 port s belong to GXW- 4008 o nly #
###################### ######## ######## ###### ######## #

# FXS Port 5
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4064 =
P4094 =
P4124 =
P4184 =
P4154 =

# FXS Port 6
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 -

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 20 OF 25

Profile 1, 1 - Profile 2)
P4065 =
P4095 =
P4125 =
P4185 =
P4155 =

# FXS Port 7
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4066 =
P4096 =
P4126 =
P4186 =
P4156 =

# FXS Port 8
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4067 =
P4097 =
P4127 =
P4187 =
P4157 =

Group Template File: GXW-GroupTemplate.txt /HT- GroupTemplate.txt

NOTE: This is an example file and should be used for reference only.

# SIP Default Generic Configur ation Pa ramete rs

###################### ######## ####
# Profile/Account 1 #
###################### ######## ####

# Profile Active. 0 - no, 1 - yes
P271 = 1

# SIP Server
P47 = as.broadworks.net

# Outbound Proxy
P48 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes .
P103 = 1

# SIP Registration. 0 - no, 1 - yes
P31 = 1

# Register Expiration (in minu tes. defaul t 1 hour, max 45 days)
P32 = 60

# DTMF via RTP (RFC283 3). 0 - no, 1 - yes
P851 = 1

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 21 OF 25

# Dial Plan.
P4200 = { x+ }

# Enable Call Features . 0 - no , 1 – ye s
P191 = 0

###################### ######## #####
# Profile/Account 2 #
###################### ######## #####

# Profile Active. 0 - no, 1 - yes
P401 = 1

# SIP Server
P747 = as.broadworks.net

# Outbound Proxy
P748 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes .
P702 = 1

# SIP Registration. 0 - no, 1 – yes
P731 = 1

# Register Expiration (in minu tes. defaul t 1 hour, max 45 days)
P732 = 60

# DTMF via RTP (RFC283 3). 0 - no, 1 - yes
P861 = 1

# Dial Plan.
P4201 = { x+ }

# Enable Call Features . 0 - no , 1 – ye s
P751 = 0

###################### ######## ######## ###### #######
# SIP Device-specific Configur ation Pa ramete rs #
###################### ######## ######## ###### #######

###################### ######## ####
# HT-502 Account 1 #
###################### ######## ####

# SIP User ID
P35 =

%BWLINEPORT-1%

# Authenticate ID
P36 =

%BWAUTHUSER-1%

# Authenticate password
P34 =

%BWAUTHPASSWORD-1%

# Display Name (John Doe)
P3 =

%BWCLID-1%

###################### ######## ####
# HT-502 Account 2 #

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 22 OF 25

###################### ######## ####

# Account 2 SIP User ID
P735 =

%BWLINEPORT-2%

# Authenticate ID
P736 =

%BWAUTHUSER-2%

# Authenticate Password
P734 =

%BWAUTHPASSWORD-2%

# Display Name
P703 =

%BWCLID-2%

###################### ######
# GXW-4004/GXW-4008 #
###################### ######

# FXS Port 1
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4060 =

%BWLINEPORT-1%

P4090 =

%BWAUTHUSER-1%

P4120 =

%BWAUTHPASSWORD-1%

P4180 =

%BWCLID-1%

P4150 =

# FXS Port 2
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4061 =

%BWLINEPORT-2%

P4091 =

%BWAUTHUSER-2%

P4121 =

%BWAUTHPASSWORD-2%

P4181 =

%BWCLID-2%

P4151 =

# FXS Port 3
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4062 =

%BWLINEPORT-3%

P4092 =

%BWAUTHUSER-3%

P4122 =

%BWAUTHPASSWORD-3%

P4182 =

%BWCLID-3%

P4152 =

# FXS Port 4
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4063 =

%BWLINEPORT-4%

P4093 =

%BWAUTHUSER-4%

P4123 =

%BWAUTHPASSWORD-4%

P4183 =

%BWCLID-4%

P4153 =

###################### ######## ######## ###### ######## #
# The following 4 port s belong to GXW- 4008 o nly #
###################### ######## ######## ###### ######## #

# FXS Port 5
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 23 OF 25

P4064 = %BWLINEPORT-5%
P4094 =

%BWAUTHUSER-5%

P4124 =

%BWAUTHPASSWORD-5%

P4184 =

%BWCLID-5%

P4154 =

# FXS Port 6
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4065 =

%BWLINEPORT-6%

P4095 =

%BWAUTHUSER-6%

P4125 =

%BWAUTHPASSWORD-6%

P4185 =

%BWCLID-6%

P4155 =

# FXS Port 7
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4066 =

%BWLINEPORT-7%

P4096 =

%BWAUTHUSER-7%

P4126 =

%BWAUTHPASSWORD-7%

P4186 =

%BWCLID-7%

P4156 =

# FXS Port 8
# SIP USER ID, Authent icate ID , Passwo rd, Di splay Na me, Profile ID (0 ­Profile 1, 1 - Profile 2)
P4067 =

%BWLINEPORT-8%

P4097 =

%BWAUTHUSER-8%

P4127 =

%BWAUTHPASSWORD-8%

P4187 =

%BWCLID-8%

P4157 =

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 24 OF 25

Appendix B: BroadWorks Validation Package Test Items

The following table describes the items tested in each BroadWorks Validation Package.

BroadWorks Validation Package Items Supported

Basic Call Basic Call Origination / Termination

Call Failure Codes
Session Audit
Ringback
Dial Plan
Inband DTMF
RFC 2833/Negotiation
Codec Renegotiation

BroadWorks Enhanced Services Basic CommPilot Call Manager Functions

Voice Messaging Audio MWI
Voice Messaging Visual MWI
Ring Splash
Priority Alerting
Priority Call Waiting
Alternate Numbers
Advanced Call Control
Anonymous Call
Remote Restart
Call Park Retrieve – Answer with Hold

DUT Services – Call Control Call Waiting

Call Hold
Blind Transfer
Attended Transfer
3-Way Call
Network Conference 3-Way
Network Conference N-Way

DUT Services – Registration and
Authentication

Authenticated Registration
Maximum Registration
Minimum Registration
Rejected Registration
Authenticated Origination
Authenticated Re-INVITE
Authenticated REFER
BroadWorks Authentication

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 25 OF 25

BroadWorks Validation Package Items Supported

DUT Services - FAX FAX Passthrough

FAX T38
DUT Services – Busy Lamp Field Basic BLF
Redundancy DNS

Registration Failover

Call Setup Failover

Mid-Call Failover
SBC/ALG Registration

Call Origination

Call Termination
Shared Call Appearance Line Seize

Line Lamp Management

Line Hold/Retrieve

Multiple Call Arrangement

SCA Bridging
Video Integrated Video Phone

Video Add-On
TCP Basic

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER

©

2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 26 OF 25

References

[1] Grandstream Networks, Inc. 2007. GXW-400X / HT-502 User Manual. Download

at

http://www.grandstream.com/user_manuals/GXW400x_User_Manual.pdf

,

http://www.grandstream.com/user_manuals/HT502_User_Manual.pdf

AND GUI Interfaces

http://www.grandstrea m.com/ user_m anua ls/GUI /GUI_G XW400 x.rar

,

http://www.grandstream .com/u ser_m anuals /GUI/GU I_HT50 2.rar

[2] Grandstream Networks, Inc. 2007. Grandstream Configuration Tool and Templates.

Available from http://www.grandstream.com/configurationtool.html

.

[3] BroadSoft, Inc. 2006. BroadWorks Enhanced IP Phone Configuration Guide,

Release 14.0. Available from the BroadSoft KnowledgeBase at

www.broadsoft.com/KnowledgeBase

.

[4] BroadSoft, Inc. 2006. BroadWorks Device Inventory Guide, Release 14.0.

Available from the BroadSoft KnowledgeBase at

www.broadsoft.com/KnowledgeBase

.

[5] BroadSoft, Inc. 2006. BroadWorks Redundancy Guide, Release 14.0. Availab le

from the BroadSoft KnowledgeBase at www.broadsoft.com/KnowledgeBase

.