GrandHall OD3208SLP, OD3208SNG User Manual
Liquid Propane Gas (LPG) Grill
Model OD3208SLP
Natural Gas (NG ) Grill
Model OD3208SNG
Operator's Manual
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product and
trained to help you with:
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL # __________________
Ÿ
(see silver CSA label on main body of grill)
Model OD3208SLP/NG
! !
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Use your grill at least 3 feet away from any
Ÿ
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences and
overhangs or sources of ignition including pilot
lights on water heaters and live electrical appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
Ÿ
DOOR USE ONLY.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
WARNING
Manual # P80151095C - Date:2010/01/14
Table of Contents
Primary Safety Warnings...........................1-3
Pre-Assembly Instructions..............................3
Part Diagrams and Lists..........................4-7
Assembly Instructions................................8-10
LP Gas Tank Installation......................11-13
Natural Gas Connection..............................14
Use & Care Instructions:
• Lighting Instructions.................................15
• Troubleshooting.........................................16
Cleaning and Maintenance..........................17
Cooking Guide........................................A1-A4
Frequently Asked Questions................A5-A6
Warranty Terms.............................Back Cover
Registered and unregistered Trademarks held by
Grand Hall include the following:
Grand Hall and design®, DS Grill and design®,
Crossray™ Lateral Infrared Burner Technology, Command Flame®, Smooth Start® Electronic Ignition System,
Ceramic Savor Plates®, Sear-zzler®, Stainless Clad
Therma-Core® Cooking Grids, Grand Café and design®,
Grand Mark and design®, Grand Chef and design®,
Grand Royale and design®, Globe Café and design®,
Urban Café and design®, Smokeless Grill and design®.
Patents held by Grand Hall include the following:
The Crossray Burner System by Grand Hall is covered
by Australian Patent No. 2006100635, Chinese Patent No.
960361, European Patent Pending, French Patent
0607231, German Patent No. 20 2006 012 212.5, U.K
Patent GB2440714, and U.S. Patent 7,475,632.
©2008 Grand Hall. All Rights Reserved.
! !
•
Keep gas regulator hose away from hot grill
•
surfaces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior
to each use for cuts, cracks, excessive wear or
other damage. If the hose appears damaged do
not use the gas grill. Call 1-877-934-7455 for a
certified replacement hose.
California Proposition 65
•
Combustion byproducts produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.
Brass components on the grill, such as hose fittings, propane cylinder valves (sold separately) and
burner valve stems, contain lead which is known to
the State of California to cause cancer, birth defects,
or other reproductive harm.
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could
result in a grease fire or explosion that could cause
serious bodily injury, death or property damage.
The Grease/Water Tray must be visually inspected
•
before each grill use. Remove any grease and wash
Grease/Water Tray with a mild soap and warm
water solution. Failure to comply with these in-
structions could result in a grease fire or explosion that could cause serious bodily injury, death
or property damage.
WARNING
LPG models must be used with Liquid Propane
Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas
only. Any attempt to convert the grill from one fuel
type to another is extremely hazardous and will
void the warranty.
! !
1.
Do not store or use gasoline or other
WARNING
flammable liquids or vapors in the vicinity of this or any other appliances.
An LP cylinder not connected for use
2.
shall not be stored in the vicinity of
this or any other appliance.
! !
Always keep the Grease/Water Tray 1/2 filled
1.
with water during operation. Failure to follow this could result in a grease fire that could
cause serious bodily injury or property damage.
2.
Handle this Grease/Water tray with a flame
retardant BBQ mitt.
WARNING
!
If you smell gas:
Shut off gas to the appliance.
1.
2.
Extinguish any open flame.
Open lid.
3.
If odor continues, keep away from
4.
the appliance and immediately call
your gas supplier or your fire department.
2
DANGER
!
Pre-Assembly Instructions For Your Safety
Congratulations on your selection of one of the finest outdoor kitchen appliances available. Your Grill is equipped with
the unique Crossray Infrared Cooking System® by Grand
Hall, which offers restaurant style grilling performance.
Infrared grilling technology cooks the food directly (and not
the air around it) which offers many advantages over conven
tional grilling systems:
MORE FLAVORFUL FOOD as the intense heat sears
the food and locks in the juices while also cooking it
faster which usually means more succulence.
FEWER FLAREUPS as the higher infrared heat vaporizes more drippings which also adds natural flavoring
to your food.
MORE EFFICIENCY AND CONVENIENCE as the higher
heat means shorter cooking times, more fuel efficiency
and easier year round grilling.
To begin your “restaurant quality” grilling, become familiar
with all of the cooking elements of your Grand Hall Grill lighting and operating instructions.
IMPORTANT NOTE: Your infrared Grand Hall Grill is equipped
with an innovative Grease/Water Tray that is designed to
trap excess grease drippings but also to moisturize your
food. It is important to keep this tray half-filled with water
while grilling in order to get the best possible results.
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips Head screwdriver
•
You will need assistance from another person to
handle the grill head and other large, heavy parts.
Open Lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard
sheet on floor and use as a work surface to protect
floor and grill parts from scratches.
You may slice the carton front corners with a utility
knife to lay open the carton front panel. This allows
you to raise the Lid and remove the components
packed inside, making it easier to lift.
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when
you unpack the shipping box or you have questions
during the assembly process call: 1-877-934-7455
M-F 8AM-4:30PM CST for assistance.
WARNING: Grease and water can get very hot. Always handle
the Grease/Water Tray with a flame retardant BBQ mitt. Before removing the Grease/Water Tray, always be sure that
the grill has properly cooled. Be aware that the tray does
contain water and grease and be extremely careful when
removing the tray to prevent spillage. Failure to follow these
instructions could cause serious bodily injury or property
damage.
US Patented No.: 7,475,632
Europe Patent Pending
Australia Patent No.: 2006100635
Germany Patent No.: 202006012212.5
France Patent No.: 0607231
UK Patent No.: GB2440714
China Patent No.: 960361
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propance
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
CSA Label
located on the
bowl rear panel
3
Hardware Pack Parts List for Models OD3208SLP & OD3208SNG
PART # PART DESCRIPTION QTY PURPOSE OF PART
P06030008A
P06030009A Hardware Pack 1 For use in assembly of Models OD3208SNG
S182G03061
S182G03061
S182G03061
S182G0306A
Hardware Pack 1 For use in assembly of Models OD3208SLP
Pan Head Screw 3/16"x3/8"
Pan Head Screw 3/16"x3/8"
Pan Head Screw 3/16"x3/8" 2 Install the Regulator Bracket (For OD3208SLP Model)
Pan Head Screw 3/16"x3/8" 3 Install Tank Tray Set (For OD3208SLP Model)
4 Install the Rear Trim Panel (For OD3208SLP/NG Models)
2 Install the Control Box (For OD3208SLP/NG Models)
Hardware Pack Diagram List for Models OD3208SLP & OD3208SNG
Pan Head Screw 3/16"x3/8"
Qty. 8 (For OD3208SLP Model)
Qty. 6 (For OD3208SNG Model)
Part # S182G03061
Pan Head Screw 3/16"x3/8"
Qty. 3 (For OD3208SLP Model)
Part # S182G0306A
* One Battery/AA and Four Batteries/AAA included in the Hardware Pack.
4
Parts Diagram for Models OD3208SLP & OD3208SNG
7
1
9
8
11
10
47
2
3
5
8
4
34B
32
27
18
33B
30
B1
B3
B2
16
42
41
40
38A
12
39
13
38B
14
15
37
36
35
38C
21
38D
34A
26
29
44
31
48
33A
46
20
43
23
33D
34C
22
28
6
21
23
24
25
33C
34D
19
49
50
55
17
45
52
54
53
51
5
Parts List for Models OD3208SLP & OD3208SNG
KEY DESCRIPTION PART# QTY
1 Lid Assembly P0014734AA 1
2 Temperature Gauge P00601381A 1
3 Lid Handle Bracket, Left P00307028E 1
4 Lid Handle Bracket, Right P00308028E 1
5 Lid Handle P00215036H 1
6 Bowl Panel, Rear/Lower P0075803BC
7 Lid Assembly Bracket, Left P03320007C 1
8 Protective Pad P05518002I 4
9 Lid Assembly Bracket, Right P03320008C 1
10 Cooking Rack/Secondary P015160282 1
11 Cooking Grid P01615038H 5
12 Electric Wire Set P02627007A 1
13 Electric Wire Protector P055330043 1
14 Connection Hose - Long P03702037D 2
15 Connection Hose - Short P03702038D 2
16 Bowl Panel, Rear/Upper P0073738BC 1
17 Tank Tray Set (LPG) Y0340050 1
18 Bowl Side Panel, Left P0072094EC 1
19 Bowl Side Panel, Right P0072195EC 1
20 Bowl P0071367EC 1
21
22 Hose, 12 FT (NG), 3/8" ID P03703001A 1
23
24 Infrared Burner Assembly P02005024B 4
25
26 Cross Lighting Channel P02212377A 2
27 Lid Hinge with Nut
28 Thermocouple Protector P03343017C 4
29
30
31
32
33A
33B
33C
33D
34A Electrode, Left Front P02618046A 1
34B Electrode, Left Rear P02618047A 1
34C Electrode, Right Front P02618048A 1
34D Electrode, Right Rear P02618049A 1
35 Control Panel Heat Shield Bracket P0300612FD 1
36 Control Panel Heat Shield
37
38A LED Light with Wire - A P02615155A 1
38B LED Light with Wire - B P02615156A 1
38C LED Light with Wire - C P02615157A 1
38D LED Light with Wire - D P02615158A 1
39 Bowl Front Trim Plate Assembly
40 Control Panel P02915293X 1
41 Control Knob Seat P03439014A 4
42 Control Knob P03436053V 4
43 Grease Tray Heat Shield P06903069C 1
Grease Shield, Upper
Grease Shield, Lower
Extension Fitting for Manifold with Orifice (LPG) P06539032A 4
Extension Fitting for Manifold with Orifice (NG) P06539033A 4
Thermocouple Bracket
Thermocouple Bracket
Thermocouple for Gas Valve
Thermocouple for Gas Valve
Thermocouple for LED Light, Left Front
Thermocouple for LED Light, Left Rear
Thermocouple for LED Light, Right Rear
Thermocouple for LED Light, Right Front
Gas Valve/Manifold Assembly (LPG) Y0060679 1
Gas Valve/Manifold Assembly (NG) Y0060680 1
P06902126C 2
P06902127C 2
P05501136L
P03327082C 2
P03327083C 2
P05305054B 2
P05305055B 2
P05305056B 1
P05305057B 1
P05305058B 1
P05305059B 1
P0300818AA
P02915341S
6
1
2
1
1
Parts List for Models OD3208SLP & OD3208SNG
KEY DESCRIPTION PART# QTY
44 Grease Tray Slide Bracket - Left P03328069C 1
45 Grease Tray Slide Bracket - Right P03328070C 1
46 Grease Tray Slide Set P05516140M 1
47 Lid Trim Plate P0014735QJ 1
48 Grease Tray Y0270020 1
49 Regulator with Hose and Connector (LPG) Y0080036 1
50 Regulator (NG) P03614005C 1
51 Lighting Stick P05507140M 1
52 Control Box P05545005M 1
53 Control Box Bracket P03343022C 1
54 LED Light Controller P05357013B 1
55 Electric Ignitor, 4-Port P02502344C 1
B1 Trim Panel, Left P07901033D 1
B2 Trim Panel, Right P07901034D 1
B3 Trim Panel, Rear P07901035D 1
Hardware Pack (LPG) P06030008A 1
Hardware Pack (NG) P06030009A 1
Operator's Manual P80151095C 1
For the repair or replacement parts you need:
Call 1-877-934-7455 M-F 8AM-4:30PM CST
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts
list. The following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous and will also void your product warranty. Keep this Operator's Manual for
convenient referral and for part replacement.
7
Assembly Instructions
CAUTION : While it is possible for one person to assemble this grill, obtain assistance from another person
when handling some of the larger, heavier pieces.
CAUTION: Build your grill island before installing the LP Gas Tank and Partition Panel (Not included in this
unit). Refer to the heights listed in Fig. 4 for constructing your grill island. Make sure a set of doors is installed
in your Island so that the Control Box can be accessed. An island unit is not included with the purchase
of your Grill Head.
1
Pan Head Screw
3/16"x3/8"
Qty. 4
Part # S182G03061
2
Install Trim Panel, Rear onto Grill Head and Grease Tray
Install the Trim Panel, Rear onto the Bowl Panel, Rear/Lower using 4 Pan Head Screws 3/16"x3/8"
as shown in diagram.
Slide the side tabs of the Grease Dranining Tray over the rails underneath the Grill Bowl as shown.
Set Grill Head into the Island. Install Control Box and Batteries
Raise the Grill Head and put the Control Box to the inside of the Island, then set Grill Head into
the Island (not included in this unit) as shown.
Open your Island Right Door, align the Control Box onto the right underside of the Grill Head (see
diagram). Install 2 Pan Head Screws 3/16"x3/8" and tighten securely.
Remove Caps from Control Box.
Place 1 AA and 4 AAA batteries into the slots of the Control Box as shown below. (Note: The positive
pole of the AA battery must face towards the cap. For the AAA batteries, 2 batteries must have the positive
pole facing towards the cap and 2 batteries must have the negative poles facing away from the caps.)
Position the caps onto the slots, and tighten them onto the Control Box.
Pan Head Screw
3/16"x3/8"
Qty. 2
Part # S182G03061
Note: Press the Switch Button to turn on the LED Light Controller
before using the grill. Press it again to turn off the LED Light
Controller to save battery power when the grill is not in use.
Switch Button OFF
Cap of LED
Light controller
Switch Button ON
Cap of LED
Light controller
AA Battery
Cap
AAA Battery
-
+
Slot
8
Loading...