Grand Hall Bai10ang, Bai10alp, Bai10blp, Bai10bng, B3810bng, B3810blp, B3810ang, B3810alp Owner's Manual
Specifications and Main Features
Frequently Asked Questions
User Manual
Liquid Propane Gas (LPG) Grill
Models B3810ALP, B3810BLP, BAI10ALP & BAI10BLP
Natural Gas (NG ) Grill
Models B3810ANG, B3810BNG, BAI10ANG & BAI10BNG
B3810ALP/NGBAI10ALP/NG
B3810BLP/NGBAI10BLP/NG
GrillInformationCenter:
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product
and trained to help you with:
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL #
Ÿ
__________________
(see silver CSA label on main body of grill)
!!
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Use your grill at least 3 feet away from any
Ÿ
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences
and overhangs or sources of ignition including
pilot lights on water heaters and live electrical
appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
Ÿ
DOOR USE ONLY.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
This appliance, when installed, must be electrically grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.
•
Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.
WARNING
!
!!
1.
Do not store or use gasoline or other
WARNING
flammable liquids or vapors in the
vicinity of this or any other appliances.
An LP cylinder not connected for
2.
use shall not be stored in the vicinity
of this or any other appliance.
!!
LPG models must be used with Liquid Propane
•
Gas and the regulator assembly supplied. Natural
Gas models must be used with Natural Gas only.
Any attempt to convert the grill from one fuel type
to another is extremely hazardous and will void the
warranty.
Keep gas regulator hose away from hot grill sur-
•
faces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior to each use
for cuts, cracks, excessive wear or other damage.
If the hose appears damaged do not use the gas
grill. Call 1-877-934-7455 for a certified replacement hose.
WARNING
!
DANGER
If you smell gas:
Shut off gas to the appliance.
1.
2.
Extinguish any open flame.
Open lid.
3.
If odor continues, keep away from
4.
the appliance and immediately call
your gas supplier or your fire
department.
CSA label located on
the Rotisserie Burner
Wind Shield.
California Proposition 65
•
!
Combustion byproducts produced when using this
product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Brass components on the grill, such as hose fittings,
propane cylinder valves (sold separately) and burner
valve stems, contain lead which is known to the State
of California to cause cancer, birth defects, or other
reproductive harm.
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could result
in a grease fire or explosion that could cause serious
bodily injury, death or property damage.
The Grease Tray must be visually inspected before
•
each grill use. Remove any grease and wash Grease
Tray with a mild soap and warm water solution. Failure
to comply with these instructions could result in a
grease fire or explosion that could cause serious
bodily injury, death or property damage.
2
Pre-Assembly Instructions For Your Safety
!!
Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.
Spiders and small insects can spin webs and nest
in the grill Burner Tubes during transit and warehousing which can lead to a gas flow obstruction
resulting in a fire in and around the Burner Tubes.
This type of "FLASHBACK FIRE" can cause serious
grill damage and create an unsafe operating condition for the user.
To reduce the chance of FLASHBACK FIRE
you must clean the Burner Tubes as follows
before initial use. Also do this at least once a
month in summer and fall or whenever spiders are
active in your area, and if your grill has not been
used for an extended period of time.
CAUTION
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips Head Screwdriver
•
You will need assistance from 2 people to handle the
grill head and other large, heavy parts.
Open lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard sheet
on floor and use as a work surface to protect floor and
grill parts from scratches.
You may slice the carton front corners with a utility knife
to lay open the carton front panel. This allows you to
raise the Lid and remove the components packed inside, making it easier to lift.
Remove the screws from the rear of each Main Burner
1.
using a Phillips Head Screwdriver.
Carefully lift each Burner up and away from the Gas
2.
Valve Orifice.
Check and clean Burner/Venturi Tubes for insects and
3.
insect nests. A clogged tube can lead to a fire beneath
the grill.
Refer to the figure below and perform one of these
4.
3 cleaning methods:
METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris.
TO CLEAN BURNER TUBE,
INSERT HOOK
HERE
9
METHOD 2: Use a bottle brush with a flexible handle
and run the brush through the Burner Tube and
inside the Burner several times to remove any
debris.
METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports.
For safe operation ensure the Gas Valve Assembly
Orifice is inside the Burner Tube before using your
grill. (See figure). If the Orifice is not inside the
Burner Tube, lighting the Burner may cause
explosion and/or fire resulting in serious bodily
injury and/or property damage.
Burner Port
Burner Tube
Foot
Use the Hardware and Part Diagrams to ensure all items
are included and free of damage.
Do not throw away the bags of hardware that are included with boxed parts. These are required for assembly.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you
unpack the shipping box or you have questions during
the assembly process call 1-877-934-7455 M-F 8AM4:30PM CST for assistance.
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propance
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
WARNING: Grease can get very hot. Always handle the Grease
Tray with a flame retardant BBQ mitt. Before removing the
Tray, always be sure that the grill has properly cooled. Be
aware that the Tray does contain grease and be extremely
careful when removing the Tray to prevent spillage. Failure to
follow these instructions could cause serious bodily injury or
property damage.
!
When using electrical appliances, basic safety
precautions should always be used.
CAUTION
WARNING
!
Gas Valve Assembly
Orifice
Burner Tube
3
Hardware Parts List for Models B3810ALP/NG & B3810BLP/NG
Install Transformer Bracket to the Left Panel of the Bowl Frame
Already installed in the Rear Panel of the Bowl Frame
PART #PART DESCRIPTIONQTYPURPOSE OF PART
P06030012A Hardware Pack1For use in assembly of B3810ALP/NG & B3810BLP/NG Models
S162G04081 Hex Head Screw 1/4"x1/2"5
S112G04081 Phillips Head Screw 1/4"x1/2"2
Install Bowl to Cart (for B3810ALP/NG Models)
S362G04061 Flange Nut 1/4"2
S112G04041 Phillips Head Screws 1/4"x1/4"2
S411G04011
Plain Washer 1/4"2
(for B3810BLP/NG Models)
S182G03061 Pan Head Screw 3/16"x3/8"2Install the LP Regulator Brackets (for B3810BLP Models)
S182G03061 Pan Head Screw 3/16"x3/8"3Install the Tank Tray Set (for B3810ALP & B3810BLP Models)
S112G04081 Phillips Head Screw 1/4"x1/2"11
Already installed in the Left/Right Panels of Bowl Frame
S112G04081 Phillips Head Screw 1/4"x1/2"4
Install Bowl Side Trim Panel (for B3810BLP/NG Models)
S362G04061 Flange Nut 1/4"4
Already installed in the Left Cart Side Panel Trim Plate
S112G03081 Phillips Head Screw 3/16"x1/2"6
Install Left Cart Side Panel Trim Plate (for B3810ALP/NG Models)
Hardware Diagram for Models B3810ALP/NG & B3810BLP/NG
Phillips Head Screw
1/4"x1/2"
Qty. 13
Part # S112G04081
Already installed in the Left/Right Panels of the
Bowl Frame
Flange Nut 1/4"
Qty. 4
PPart # S362G04061
*One Battery/AA included in the Hardware Pack
Hex Head Screw
1/4"x1/2"
Qty. 5
Part # S162G04081
Phillips Head Screw
1/4"x1/2"
Qty. 4
Part # S112G04081
Phillips Head Screw
1/4"x1/4"
Qty. 2
Part # S112G04041
Already installed in the Left Cart
Side Panel Trim Plate
Phillips Head Screw 3/16"x1/2"
Qty. 6
Part # S112G03081
Pan Head Screw
3/16"x3/8"
Qty. 5
Part # S182G03061
Flange Nut 1/4"
Qty. 2
Part # S362G04061
Hardware Parts List for B3810ALP/NG Cart Model
PART #PART DESCRIPTIONQTYPURPOSE OF PART
P06030013A Hardware Pack1For use in assembly B3810ALP/NG Cart Models
S112G04081 Phillips Head Screw 1/4"x1/2"10
Already installed in the Left/Right Panels of Bowl Frame
S112G04081 Phillips Head Screw 1/4"x1/2"4
S362G04061 Flange Nut 1/4"4
Install Side Shelves
Plain Washer 1/4"
Qty. 2
Part # S411G04011
S112G04081 Phillips Head Screw 1/4"x1/2"1Install the Side Burner Lid Chain
Hardware Diagram for B3810ALP/NG Cart Model
Already installed in the Left/Right Panels of the
Bowl Frame
Phillips Head Screw
1/4"x1/2"
Qty. 10
Part # S112G04081
Flange Nut 1/4"
Qty. 4
PPart # S362G04061
Phillips Head Screw
1/4"x1/2"
Qty. 4
Part # S112G04081
4
Already installed in the Rear Panel of the
Bowl Frame
Phillips Head Screw 1/4"x1/2"
Qty. 1
Part # S112G04081
Hardware Parts List for Models BAI10ALP/NG & BAI10BLP/NG
Install Transformer Bracket to the Left Panel of the Bowl Frame
PART #PART DESCRIPTIONQTYPURPOSE OF PART
P06030014A Hardware Pack1For use in assembly of BAI10ALP/NG & BAI10BLP/NG Models
S162G04081 Hex Head Screw 1/4"x1/2"6
S112G04041 Phillips Head Screw 1/4"x1/4"2
Install Bowl to Cart (for BAI10ALP/NG Models)
S112G04041 Phillips Head Screws 1/4"x1/4"2
S411G04011
Plain Washer 1/4"2
(for BAI10BLP/NG Models)
S182G03061 Pan Head Screw 3/16"x3/8"2Install the LP Regulator Brackets (for BAI10BLP Model)
S182G03061 Pan Head Screw 3/16"x3/8"3Install the Tank Tray Set (for BAI10ALP & BAI10BLP Model)
Already installed in the Bowl Panel, Outside Rear
S182G03081 Pan Head Screw 3/16"x1/2"6
S112G04081 Phillips Head Screw 1/4"x1/2"2
Install Rear Trim Panel (for BAI10BLP/NG Models)
Already installed in the Left and Right Cart Side Panel Trim Plates
S112G03081 Phillips Head Screw 3/16"x1/2"12
Install Left and Right Cart Side Panel Trim Plates (for
BAI10ALP/NG Models)
Hardware Diagram for Models BAI10ALP/NG & BAI10BLP/NG
Hex Head Screw
1/4"x1/2"
Qty. 6
Part # S162G04081
Already installed in the Bowl Panel,
Outside Rear
Pan Head Screw 3/16"x1/2"
Qty. 6
Part # S182G03081
Phillips Head Screw 1/4"x1/2"
Qty. 2
Part # S112G04081
*Two Batteries/AA included in the Hardware Pack
Phillips Head Screw
1/4"x1/4"
Qty. 4
Part # S112G04041
Pan Head Screw
3/16"x3/8"
Qty. 5
Part # S182G03061
Already installed in the Left and
Right Cart Side Panel Trim Plates
Phillips Head Screw 3/16"x1/2"
Qty. 12
Part # S112G03081
Plain Washer 1/4"
Qty. 2
Part # S411G04011
Hardware Parts List for BAI10ALP/NG Cart Model
PART #PART DESCRIPTIONQTYPURPOSE OF PART
P06030015AHardware Pack1For use in assembly of BAI0ALP/NG Cart Model
S112G04081Phillips Head Screw 1/4"x1/2"8Install Side Shelves
Already installed in the Bowl Panel, Outside Left/Right
S182G03081Pan Head Screw 3/16"x1/2"2Install Side Shelves
Hardware Diagram for BAI10ALP/NG Cart Model
Already installed in the Bowl Panel,
Outside Left/Right
Phillips Head Screw
1/4"x1/2"
Qty. 8
Part # S112G04081
Pan Head Screw 3/16"x1/2"
Qty. 2
Part # S182G03081
5
Parts Diagram for Models B3810ALP/NG & B3810BLP/NG
42A Extension Fitting for ManifoldP03907012AP03907012A1
42B Extension Fitting for Manifold, LPGP03902016AP03902016A1
43A Regulator with Hose, LPGP03620025AN/A1
43B Regulator with Hose and Connector (LPG)N/AP03620026A1
44Extension Fitting for Manifold, NGP03901015AP03901015A1
45Extension Fitting - Outlet, NG P03901013AP03901013A1
46Regulator/NGP03628001BP03628001B1
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The
following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be
dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part
replacement.
13
Rotisserie Assembly Parts Diagram for B3810ALP/NG & B3810BLP/NG